Getting 401 error while creating a Report Data Source with MOSS 2010 Foundation

I have setup SQL Server 2008 R2 Reporting Services with SharePoint 2010 Foundation in SharePoint integrated mode. SharePoint Foundation is in machine 1 whereas SQL Server 2008 R2 and SSRS Report Server are in machine 2. While configuring Reporting
Services - Sharepoint integration, I have used Authentication Mode as "Windows Authentication" (I need to use Kerberos).
My objective is to setup a Data Connection Library, a Report Model Library, and a Reports Library so that I can upload a Report Data Source, some SMDLs, and a few Reports onto their respective libraries.
While creating the top level site, "Business Intelligence Center" was not available for template selection since SharePoint Foundation is being used. I therefore selected "Blank Site" as the template.
While creating a SharePoint Site under the top level site, for template selection I again had to select "Blank Site".
I then proceeded to create a library for the data connection. Towards this, I created a new document library and selected "Basic page" as the document template. I then went to Library Settings for this newly created library and clicked on
Advanced Settings. In the Advanced Settings page, for "Allow management of content types?" I selected "Yes". Then I clicked on "Add from existing content types" and selected "Report Data Source". I deleted the existing
"Document" content type for this library.
Now I wanted to created a Data Connection in the above Data Connection library. For this when I clicked on "New Document" under "Documents" of "Library Tools" and selected "Report Data Source", I got the error "The
request failed with HTTP status
401: Unauthorized.".
Can anybody tell me why I am getting this error?
Note: I have created the site and the library using SharePoint Admin account.

Hi,
Thank you for your detailed description. According to the description, I noticed that the report server was not part of the
SharePoint farm. Add the report server to the
SharePoint farm and see how it works.
To join a report server to a SharePoint farm, the report server must be installed on a computer that has an instance of a SharePoint product or technology. You can install the report server before or after installing the SharePoint product
or technology instance.
More information, see
http://msdn.microsoft.com/en-us/library/bb283190.aspx
Thanks.
Tracy Cai
TechNet Community Support

Similar Messages

  • Error While Creating  The Generic Data Source.

    Hi Gurus,
    I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
    View as Follows:
    Table1 has the Following Fields
    Field Type
    MANDT CLNT
    RECNO NUMC
    STATUS CHAR
    LMODF CHAR
    Table2 has Fields
    Fields Type
    MANDT CLNT
    RECNO NUMC
    PHCOS QUAN
    MATNR CHAR
    EQSFS QUAN
    MEINS UNIT
    In Table2 under Currency and Quantity Field tab
    For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
    For Field EQSFS the Reference Table is MSEG and reference field is MEINS
    View Description
    Tables:
    Table1
    Table2
    MSEG
    Join condition For the View is
    TABLE2-MANDT=TABLE1-MANDT
    TABLE2-RECNO=TABLE1-RECNO
    TABLE2-MANDT=MSEG-MANDT
    TABLE2-MATNR=MSEG-MATNR
    The Problem is While saving the Data Source it is Giving an Error as Follows
    Invalid extract structure template ZV_TEST1 of DataSource zgg_test
    Message no. R8359
    Diagnosis
    You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
    Procedure
    Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
    Please help me In Solving this Issue
    Thanks in advance
    Santosh

    n Table2 under Currency and Quantity Field tab
    For Field PHCOS The change Reference table to  TABLE2   For Field EQSFS the change the Reference Table to TABLE2  
    ref field MEINS ...
    This works ..
    Priya
    Edited by: Priya on Dec 31, 2007 1:30 PM

  • Error while creating a report in BI publisher

    Hi all ,
    I am getting an error while creating a new report in BI publisher .
    the error shown in console is --
    java.lang.SecurityException: /
    In the front end - i am getting
    Operation failed: d:/OracleBI/xmlp/XMLP/Users/~administrator/annapurna/test/test.xdo
    please suggest if anyone knows.

    Hi,
    I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

  • Getting Connection error while creating Substituion Rule in UWL

    Hi Everybody,
    Getting below error while creating Substitution Rules in UWL.
    "error for the u201Cconnectionu201D to SAP_R3_Finance ".
    Can be able to see all Work Items belongs to me. getting the errror while creating Substitution Rule only..
    Could anybody tell me what might be the Reason what steps i need to take to resolve this issue.
    Thanks,
    Naveen Kumar

    Hi Uds,
    are you running SOA Suite on a Linux server and not on your PC and just running JDeveloper on your PC?
    If so try creating the repository file specifying a directory on the Linux server.
    For example to:
    /tmp/sample_repository
    So Choose 'File' from drop down menu
    Enter /tmp/sample_repository
    Click on create button
    This should create the file called sample_repository in /tmp on the Linux server.
    Can you tell us what your environment is?
    Regards Cel

  • Getting an error while creating a ERP Quotation from CRM Sales Web-UI.

    Hi Experts,
    I am getting an error while creating a ERP quotation from CRM Sales Web-UI. Here  I am enclosing the screen shot. Please give me the solution for this.Thank you in advance.
    Regards
    Kishor Kumar.

    Hi Kishore,
    Please refer to the link below -
    Entry of ERP Sales Documents in SAP CRM - Sales Quotation and Order Management - SAP Library
    Also, refer to the SAP note -
    1446253  - FAQ note: ERP documents in the CRM Web UI (lead-to-cash scenario)
    This note will give you the related topic and the configuration required through SAP help links.
    Hope this will be useful.
    Thanks and Regards
    DJ

  • Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

    Hi,    We recently started getting these errors a couple times a day.   There are 12 of them in total.     We also have exactly 12 subscriptions.   Does this indicate some db issue causing all of these
    to fail?
    Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
    The following error(s) were encountered:
    Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
    One or more workflows were affected by this.
    Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
    Instance name: Alert Notification Subscription Server
    Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
    Management group: A Company Management Group
    Thanks Lance

    Hi,
    Do you have hotfixes applied?
    http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
    Also, I found a relevant thread for your reference.
    Alert subscription data source module encountered errors while running</u1:p>
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Getting an error while executing a report

    Hi,
    While generating a report through Tcode RSRT, I am getting an error message.
    Its showing ,
    "Element 3X7YU11DF0IQ7YARYGY0BU9ZN (version A) does not exist on the database".
    Can you please help me out in this.
    Thanks,
    Jyothi.

    Hi Jyothi,
        Did you make changes to the existing report or facing problem while creating new report? Either ways, it is something like some element of in the report has some realtion with others and that particular element is not there now. Just check if they are any exceptions or conditions in the report which were defined on the objects which were present earlier and removed later.
    Something similar to the above scenario might be the case.
    Hope this helps you....

  • Getting "SAPSQL_ARRAY_INSERT_DUPREC" error while creating a new layout

    Hi,
    I deleted a layout from a level.  When I tried to create a new layout with the same technical name, I was getting a run time error.
    Name of the error : SAPSQL_ARRAY_INSERT_DUPREC
    Exception           : CX_SY_OPEN_SQL_DB
    I went to ST22 and analyzed the dump.  I found that the entries for the layout that I deleted were still present in the following 2 tables:
    1) UPP_PARAMT
    2) UPP_ELEMT
    My questions are:
    1) Is there any possibilities that I can retrive the layout that I deleted with the help of the entries present in the above tables?
    2) Can I remove the entries from these two tables so that I can create a new layout with the same technical name?
    Thanks,
    Seetharaman V

    Hi Matt
    Thanks for your comments.  I was getting this error while trying to save the new layout i created and not during the creatiion.
    Thanks,
    Seetha

  • Runtime error while creating material master data

    hello sir,
    i am facing one prolem while creating MATERIAL MASTER DATA.
    AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
    MESSAGE TYPE: - MDS_KEYMAP.
    MESSAGE CLASS: 001.
    PLEASE TELL ME WHAT TO DO?
    REGARDS..

    SIR THANK YOU FOR YOUR REPLY.
    I ALREADY DONE THAT DUMP ANALYSIS.
    SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

  • Error while creating customer master data

    dear sir,
    i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
      again while creating one with same name showing error while maintaing sales level data
    Check: Table KNA1 does not exist, table KNVI does
    Message no. F2061
    plz help how do i rectify this problem and maintain the same cutomer no (external) again.
    regards,
    Debesh

    Hi,
    you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
    XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
    Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
    If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
    regards
    Vivek.
    Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM

  • Error when creating a new Data Source

    All, This is on BI Publisher 11g.
    When I create a new data source and supply password and then click "Apply" button on top right corner, i get following error
    Error 500--Internal Server Error
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.5.1 500 Internal Server Error
    The server encountered an unexpected condition which prevented it from fulfilling the request.
    what am i doing wrong?
    Thank you for reading this post.
    Thanks,
    R

    The schema/user is system and the password is alpha-numeric, upper/lower case, no special char ...
    As a workaround I was able to add the password to the entry in the datasources.xml file and restarted BI Pub.
    The JDBC is working ... I can test the connection successfully ... just wont save the entry
    Edited by: tread on Oct 17, 2011 11:55 AM

  • Exception occurs while creating a new data source using BIRT RCP desighner!

    Guys,
    Please help me on this !
    I have created a pluin project( BIRT ODA API) using elipse and i have placed it in plug-in folder of BIRT RCP Desighner.
    When i try create a new data source i am getting the below exception and the jars are available in plugin folders :
    org.eclipse.datatools.connectivity.oda.consumer.helper.OdaHelperException: Unable to create the ODA driver's connection factory. (openmrsdb.impl.Driver) ;
    java.lang.ClassNotFoundException: openmrsdb.impl.Driver
         at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.loadDriverInstance(OdaDriver.java:230)
         at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.init(OdaDriver.java:177)
         at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.<init>(OdaDriver.java:76)
         at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionWrapper.getOdaDriverHelper(OdaConnectionWrapper.java:236)
         at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionWrapper.getOdaConnectionHelper(OdaConnectionWrapper.java:225)
         at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionWrapper.<init>(OdaConnectionWrapper.java:57)
         at org.eclipse.datatools.connectivity.oda.profile.OdaConnectionFactory.createConnection(OdaConnectionFactory.java:26)
         at org.eclipse.datatools.connectivity.internal.ConnectionFactoryProvider.createConnection(ConnectionFactoryProvider.java:77)
         at org.eclipse.datatools.connectivity.internal.ConnectionProfile.createConnection(ConnectionProfile.java:354)
         at org.eclipse.datatools.connectivity.ui.PingJob.run(PingJob.java:57)
         at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
    Caused by: java.lang.ClassNotFoundException: openmrsdb.impl.Driver
         at org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java:434)
         at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:369)
         at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:357)
         at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:83)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at org.eclipse.osgi.framework.internal.core.BundleLoader.loadClass(BundleLoader.java:289)
         at org.eclipse.osgi.framework.internal.core.BundleHost.loadClass(BundleHost.java:227)
         at org.eclipse.osgi.framework.internal.core.AbstractBundle.loadClass(AbstractBundle.java:1269)
         at org.eclipse.datatools.connectivity.oda.consumer.helper.OdaDriver.loadDriverInstance(OdaDriver.java:208)
         ... 10 more
    Could you please any one help on this.!
    Thanks in advance

    when defining a data source through the admin web page, don't add '!' in front of the password.
    ! is needed only when configuring a data source in the mapViewerConfig.xml file.

  • How to create a linked data source with document libraries based on the same template?

    I use SharePoint Foundation 2013, SP Designer and Visual Studio 2013 to my needs. But there are several things which i don't get.
    I have a number of libraries which use the same template. I want to create a linked data source, that would contain them all, and if I add a library based on this template, the library would be added to the data sorce. Is it possible?
    I tried creating linked data souces, but the view that it brings by default is limited(no sorting, etc.). How can it be modified?

    I am planning to do my project on Linux with J2EE,Oracle technologies.You don't need to set up a DSN. Just use a JDBC connect string such as jdbc:oracle:thin:@localhost:1521:xe
    ~Jer

  • Strange error while creating form/report pages [ORA-20001]

    While creating two new pages with a form and report on it, I've got a strange error. I tried to create the pages several times, but I always got the same error:
    ORA-20001: Unable to create query and update page. ORA-20001: Unable to create form on table. ORA-20001: Error creating shortcut id="" ORA-00001: unique constraint (FLOWS_030000.WWV_FLOW_SHORTCUT_IDX1) violated
    Error creating query and update.
    Return to application.
    I'm using the wizard to get the pages, like I did many times before (without problems), but this time it will not work!
    Greetings,
    Jan

    Below is a view or sql query i want to create in XE to show users report on startdate,end date,road name,etc,i am having a problem making this view work when i put the code in the sql script. Kindly help me with this if you can please. Thanks. CREATE OR REPLACE FORCE VIEW "RESULTS_DETAILS_VIEW" ("STARTDATE","ENDDATE","ROAD","NAME","STATUS","TYPE","UTILITIES","DATES","LUTON",
    AS SELECT
    d.Startdate,
    d.EndDate,
    l.Road,
    u.Name,
    ws.Status,
    wt.Type,
    cb.startdate,
    cb.enddate,
    cb.road,
    cb.utility,
    cb.type,
    cb.status
    FROM
    Dates d,
    Luton l,
    Utilities u,
    WorkStatus ws,
    WorkType wt,
    Comb cb
    WHERE cb.startDate = d.StartDate
    AND cb.endDate = d.EndDate
    AND cb.road = l.Road
    AND cb.utility = u.Name
    AND cb.type = wt.Type
    AND cb.status = ws.Status
    WITH READ ONLY
    /

  • Getting following error while creating a datasource connection with oracle database.

    I have 32 bit oracle server installed in remote server.
    and 64 bit sql server 2008 r2 report server installed, and 64 bit oracle client installed on my report server  while create a new datasource
    in the report server i am getting this error
    Error 
    Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle
    client components installed
    How can i fix this and let me know the reason

    This link will help you out.
    http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/0a38fa00-31de-49de-b68f-4c5a4565e5b1?prof=required
    Milan Das

Maybe you are looking for