Excel 2013 PowerPivot Error - "PowerPivot is unable to load the Data Model"

I'm attempting to use the PowerPivot add-on in Excel. When clicking 'Manage Data Model' or attempting to 'Load to data model,' I receive the error 'We couldn't load the Data Model. This may be because the Data Model in this workbook is damaged.',
followed by 'PowerPivot is unable to load the Data Model.' This happens irrespective of data source type. I have Excel 2013 32-bit, PowerPivot 32-bit, running on Windows 7 OS 64-bit. I am not running an SSAS instance on my machine.
Any suggestions?

Hi
Have you ever tried to repair your office?
Also we may refer to the following blog :
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/11/12/powerpivot-for-excel-2013-errors-after-october-update-kb-2825655.aspx
This issue seems to be caused by the October 2013 update (KB 2825655) for Excel 2013. Try to remove it or restore the system to an earlier point and check the result.
Regards
Tylor Wang
TechNet Community Support

Similar Messages

Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it fr

Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it from system registry. My system is Windows 7 64bit.

UPDATE: The true error is : '
"itunes was unable to load data class information from sync services"
Any of the topics didnt work.
Sync on my wife's laptop works.

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.

Is this on a Windows XP, Vista or 7 system?

Unable to open Power BI Sites - Error: We were unable to load the Site. Refresh the page to try again

Power BI Sites Error
We were unable to load the Site. Refresh the page to try again
When opening Power BI Sites with internet explorer, in certain security configurations you may run into the above error. While we are looking into resolving this, please see the following workaround:
From the Tools menu, select internet options.
On the security tab uncheck the "Enable Protected Mode" checkbox form the relevant Zone (Intranet/Internet)
Remove all entries to *.powerbi.com from trusted sites or/and local intranet sites
On the advanced tab, uncheck the "Enable enhanced protected mode" (if you made a change here it will require a restart of the machine)
Restart and try again (if not changes done in the last step, just restart the browser)

Hi
Any further debugging tips? I upgraded from IE9 to IE11 on my Win7 machine to try get Q&A working, it broke the entire PowerBI site for me

Unable to load the data into Cube Using DTP in the quality system

Hi,
I am unable to load the data from PSA to Cube using DTP in the quality system for the first time
I am getting the error like" Data package processing terminated" and "Source TRCS 2LIS_17_NOTIF is not allowed".
Please suggest .
Thanks,
Satyaprasad

Hi,
Some Infoobjects are missing while collecting the transport.
I collected those objects and transported ,now its working fine.
Many Thanks to all
Regards,
Satyaprasad

Unable to load the data into HFM

Hello,
We created new HFM app configured that with FDM, generated output file through FDM and loaded that file through HFM directly 5-6 times, there was no issue till here.
Then I loaded the file through FDM 4 times successfully, even for different months. But, after 4 loads I start getting Error. Attached is the error log .
Please help us earliest..
** Begin fdmFM11XG6A Runtime Error Log Entry [2013-10-30-13:44:26] **
Error:
Code............-2147217873
Description.....System.Runtime.InteropServices.COMException (0x80040E2F): Exception from HRESULT: 0x80040E2F
at HSVCDATALOADLib.HsvcDataLoadClass.Load(String bstrClientFilename, String bstrClientLogFileName)
at fdmFM11XG6A.clsFMAdapter.fDBLoad(String strLoadFile, String strErrFile, String& strDelimiter, Int16& intMethod, Boolean& blnAccumFile, Boolean& blnHasShare, Int16& intMode)
Procedure.......clsHPDataManipulation.fDBLoad
Component.......E:\Opt\Shared\Apps\Hyperion\Install\Oracle\Middleware\EPMSystem11R1\products\FinancialDataQuality\SharedComponents\FM11X-G6-A_1016\AdapterComponents\fdmFM11XG6A\fdmFM11XG6A.dll
Version.........1116
Identification:
User............fdmadmin
Computer Name...EMSHALGADHYFD02
FINANCIAL MANAGEMENT Connection:
App Name........
Cluster Name....
Domain............
Connect Status.... Connection Open
Thanks,'
Raam

We are working with the DB team but they have confirmed that they is no issue with the TB, the process we have followed
As a standard process – while loading the data from FDM or manually to HFM – we don’t write any SQL query. Using the web interface – data would be loaded to HFM application. This data can we viewed by different reporting tools (smart view(excel)/HFR Report/etc.)
There is no any official documents on oracle website which talk about Insert SQL query which is used to insert data to HFM tables. Even, Hyperion does not provide much details on its internal tables used. Hyperion does not provide much insight on internal structure of HFM system.
As per Hyperion blogs/forums on internet –HFM stores the base level data in so called DCE tables (for example EMHFMFinal _DCE_1_2013 where EMHFMFinal is application name, 1 identifies the Scenario and 2013 the Year). Each row in the DCE table contains data for all periods of a given combination of dimensions (also called an intersection).
We are trying to load same data file with a replace option( it should delete the existing data before loading the data file).

Unable to load the data from PSA to INFOCUBE

Hi BI Experts, good afternoon.
    I am loading 3 years data( Full load ) from R/3 to Infocube.
   So loaded the data by monthwise. So i created 36 info packages.
Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
Here i got data in PSA without fail.
Then i tried to load the data from PSA to Infocube MANUALLY.
But its not happening.
One message came this
       SID 60,758 is smaller than the compress SID of cube ZIC_C03; no        request booking.
   Please give me the solution how to solve this problem.
Thanks & Regards
     Anjali

Hi Teja,
   Thanks for the good response.
How can i check whether it is already compressed or not?
Pls give me the reply.
Thanks
          Anjali

HT1386 Error message when trying to sync .. "unable to load provider data from sync services

When trying to sync I phone ... I get an error message saying Unable to load provider data from sync services ....
I have removed and re-installed I tunes and still get this message ..
Thanks for any help !

Thanks Joy
I did try that and it eventually went to backing up. however, after 2 Hrs the bar hadn't moved any ..

Unable to load the necessary SQL connectivity library

I am installing an older (non-Microsoft) program (32bit) that manages mail online and it requires an access to SQL Server to create database to complete installation. I am installing it on Windows Server 2003 standard. This program
I am installing recommends SQL Server 2000. We are now running SQL Server 2005 on a separate server. For connectivity, I installed SQL server 2005 tools (full install) on the same 2003 server as the program so that this program could manage to locate
SQL server 2005 and connect to it in order to create necessary tables and complete the installation. I already manually created the database for this program on SQL Server 2005. I created ODBC SQL Server connection string (User DSN). However, during
installation, I am getting the following error message:
ERROR: Setup is unable to load the necessary SQL connectivity library. This indicates that the proper client-side SQL utilities are not installed on your system. Setup cannot continue.
Could this error be SQL Server version specific and the program only likes SQL 2000 client tools and not 2005? Are there major differences between libraries versions? Should there be something else configured? What am I missing? Thanks in advance.

ERROR: Setup is unable to load the necessary SQL connectivity library. This indicates that the proper client-side SQL utilities are not installed on your system. Setup cannot continue.
Could this error be SQL Server version specific and the program only likes SQL 2000
client tools and not 2005?
Tools are tools, not a connectivity library and by the error message the right connectivity library is missing. Ask the software vendor which one is required or look it up on the other machine, where the application works.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Unable to Load the XML data file in to RTF template

Hi Team,
We are working on the XML publisher reports,where the xml data is containing the Japanese Characters.
I am facing an error while loading my xml data which has the japanese characters values in between the XML tags into the RTF Template.Though i have installed Japan fonts in my system,still unable to load the data.
Could any one please help me out in this regard.
Thanks in Advance.

Hi;
Hi please clearfy below question for can make you fast help
1. What is your OS?
2. What is your EBS verison?
3. What is your DB version and Db character set?
Also check:
About Oracle XML Publisher Release 5.6.3 [ID 422508.1]
Regard
Helios

Error while loading ACS data model on server

Hi
I am installing a ACS4.6.1 framework on Tomcat3.2.3. One of the step in installation is to load the data model of ACs on oracle server.
They have given a sql script to do the same.
On running that script we get following errors:
BEGIN
ERROR at line 1:
ORA-20000: ConText error:
DRG-10703: invalid framework object AUTO_SECTION_GROUP
ORA-06512: at "CTXSYS.DRUE", line 122
ORA-06512: at "CTXSYS.CTX_DDL", line 173
ORA-06512: at line 2
CREATE INDEX xml_content_index ON search_content(xml_content) INDEXTYPE IS ctxsys.context
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: ConText error:
DRG-12203: section group autogroup does not exist
ORA-06512: at "CTXSYS.DRUE", line 122
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 34
ORA-06512: at line 1
CREATE INDEX raw_content_index ON search_content(raw_content) INDEXTYPE IS ctxsys.context
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: ConText error:
DRG-50704: Net8 listener is not running or cannot start external procedures
ORA-28575: unable to open RPC connection to external procedure agent
ORA-12154: TNS:could not resolve service name
ORA-06512: at "CTXSYS.DRUE", line 122
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 34
ORA-06512: at line 1
Are there any settings missing?
Versions are as under
Oracle server is 8i
Oracle client is 8.1.5
Oracle intermedia is installed on the server
I request you to provide help on this urgently .
Thanks in advance
Shriram

AUTO_SECTION_GROUP is available in 8.1.6 or greater.
You also need to have the db listener running.

"Load to Data Model failed" error

Hi,
I tried loading the data model using the following code:
I got the above error.
In the preview I see that everything is OK, but it doesn't upload to the data model correctly - stuck on the part of "Added Custom1" onwards.
Any inputs?
Thankד

THE CODE:
let
Source = Folder.Files("A:\External Data\Exhaust"),
#"Added Custom" = Table.AddColumn(Source, "GetExhaustData", each Excel.Workbook([Content])),
#"Removed Columns" = Table.RemoveColumns(#"Added Custom",{"Content", "Extension", "Attributes", "Folder Path"}),
#"Expand GetExhaustData" = Table.ExpandTableColumn(#"Removed Columns", "GetExhaustData", {"Name", "Data", "Item", "Kind"}, {"GetExhaustData.Name", "GetExhaustData.Data",
"GetExhaustData.Item", "GetExhaustData.Kind"}),
#"Added Custom1" = Table.AddColumn(#"Expand GetExhaustData", "NoHeaders", each Table.PromoteHeaders([GetExhaustData.Data])),
#"Removed Columns1" = Table.RemoveColumns(#"Added Custom1",{"GetExhaustData.Name", "GetExhaustData.Data", "GetExhaustData.Item", "GetExhaustData.Kind"}),
#"Expand NoHeaders" = Table.ExpandTableColumn(#"Removed Columns1", "NoHeaders", {"Index", "Date", "CASH BUYER"}, {"Index", "Date", "CASH BUYER"}),
#"Changed Type" = Table.TransformColumnTypes(#"Expand NoHeaders",{{"Date", type date}, {"CASH BUYER", type number}})
in
#"Changed Type"
עמית

Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

I'm using Excel 2013 and Windows 8.1. I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
"We couldn't get data from the Data Model. Here's the error message we got:
The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
Any idea how I can fix this problem? I haven't changed anything related to that particular attribute. All the data is contained in separate sheets in the workbook, so there are no external sources of data.
Thanks.
Jean

Thanks for all the suggestions.
I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query. (I've had this same error before, and I believe I applied the hotfix at that time.)
I think this problem started after I updated a number of the date filters in the pivot tables. I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
the pivot tables.
As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine. I can also refresh this pivot table.
Then I tried adding a pivot table which went against several tables in the data model (including the table in question). The pivot table seemed to return that data properly. However, when I tried to refresh it, I got the same error message ("we
couldn't get data from the data model...").
Dany also suggested running the queries one at a time to see which one is in error. Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
mentioned in the error message). Pivot Tables without that particular table seem to refresh OK. Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
Any other suggestions? I'd be happy to send a copy of the spreadsheet.
Thanks for all the help.
Jean

Getting an "unable to Load the tables in the power pivot window" error

Hello,
I have 2 worksheets in a excel file and would like to load both into a power pivot table. When I click the 'create linked table' in the pwer pivot ribbon, The powerpivot window open and looks like its about to load the data but then I get
a popup dialogue box with the following error:
Unable to load the tables in the powerpivot window
============================
Error Message:
============================
The given key was not present in the dictionary.
============================
Call Stack:
============================
   at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at Microsoft.AnalysisServices.Modeler.SheetTabs.PopulateSheetList(String selKey)
   at Microsoft.AnalysisServices.Modeler.SheetTabs.SetSelectedSheet(String key)
   at Microsoft.AnalysisServices.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
When I try again, there is a meesage saying the table is already linked but I dont see any data.
has Anyone seen this error before and know what to do?
Thanks,
Nathan

Hi
I get first the same error as above but after I look into the details I see the following error message:
in translation the error message is: There is already a item with the same key added.
I can open the power pivot window in diagram view. And after I refresh the data in one of the tables I can open it in the table view. I have already searched for "!" signs in the calculations and searched for calculations with same name but that
is not the problem.
Also I can't open the synonym window. I think this has something to do with it because I've made changes in the synonyms.
============================
Foutbericht:
============================
Er is al een item met dezelfde sleutel toegevoegd.
============================
Aanroepstack:
============================
   bij System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
   bij Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(Tuple`2 measure, SynonymCollection synonyms)
   bij Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
   bij Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
   bij Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
   bij Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
============================
Thanks,
Leo

PowerPivot removed table replicated into the data model on refresh

Hey
I am facing the following problem which is absolutely persistent and annoying in nature. I am using a data model created with PowerPivot with connections to three different SQL servers and 25 tables. The bug is that every time I refresh my data, a table
that was initially added to the data model (and later removed) is replicated in equivalent number of tables that use this connection, which is currently around 12 tables, so I get 12 duplicates of the same unnecessary table on every refresh, named with the
name of the schema on the SQL server that is followed by a running number. Removing these from the data model on every refresh simply takes too much time on a daily basis. The additional undesired table which is created is what is defined in the SQL query
of the connection string of this connection.
I tried to solve this problem by zipping the Excel file and modifying this SQL statement present in the connection string in the connections.xml file in a way that it would not return anything, but this always leads into a corrupted workbook.
After encountering this I have managed to avoid this problem by making sure that the initial table I'm adding to the data model will remain in the model, but I really don't want to rebuild this current model. Is there any fix for this issue without
rebuilding the data model?
Thanks for all the help in advance!

I am using 64-bit Office 2013 with the recent SP1 upgrade and the included PowerPivot plug-in on a Windows 8.1 machine.
I always create the connection by using "From SQL server" then fill in the server and log in details and use a ready SQL statement that I have written by using SQL Server Management Studio to import the initial table. For all the preceding tables
using the same server and schema, I always select it from existing connections and just paste the SQL queries required for any additional tables to the "Write a query that will specify the data to import", rather than using the table import tool.
I am not sure if it could have any effect that I've been using the type connection "From SQL server" although the database is really running on Azure (there is a possibility to select From Other sources > Microsoft SQL Azure, but the functionality
seems the same).
I don't really understand what I should edit from the existing connections section. Just to clarify, apparently the Connection String parameters can be edited from PowerPivot, but not the Command Text which can be viewed from Excel Data > Connections
> Properties, but is shown in gray with a message "Some properties cannot be changed because this connection was modified using the PowerPivot add-in."
In the data model I am using two sets of identical tables, but connected to two different servers that are running a database 1:1 in structure. Initially the problem considered only the other of these, but I accidentally reproduced it by, again, editing
the SQL query in the table that was initially imported when that connection was created (PowerPivot > Design > Table Properties). Now when refreshing I get tables that are structured as in what the "Connection Text" part of the connection would
produce, which replicated for the equivalent amount of additional tables using the same connection, so now I'm getting 12 tables (the number of tables using the same connection) each named "*schemaname1* Query", "*schemaname1* Query2",
"*schemaname1* Query3" "*schemaname2* Query" and so on.
Personally I can definitely see a pattern here. If there isn't a table matching what has been specified in the "Command Text" that was described when the connection was created, then it for some reason runs this query anyway on every table that
is using the connection.

Excel 2013 PowerPivot Error - "PowerPivot is unable to load the Data Model"

Similar Messages

Maybe you are looking for