Flex launching error on Windows Vista (Windows No Disk - exception ....

Hi guys, I downloaded the flex builder from adobe, I install the application but when I'am trying to lauch my application I get the error
Windows - No Disk ... exception processing message 0xc0000013
I reinstall adobe flash and my java runtime, I still get the same error, I can create an application but I can't execute it, that's sucks!
I check on adobe in the faq for flex, they say that error occurs when you install the application from a DVD, that's not true, I downloaded from their site....
thanks
Alex

Ok guys, I found it myself, very strange!
I just change my default workspace to another one, I got the same problem then I just put back the default workspace and the problem was resolved!
Alex

Similar Messages

  • Disabling SMB2 and SMB3 Client from Windows Vista, Windows 7 and Windows 8.

    There are many programs that are using a shared file on the server from clients from XP to Windows 10. From time to time it seems like there is a network outage and the handle to the file is broken and the file
    cannot be read or updated. It seems more prevalent on a Windows 2012 server but may have happened from time to time on 2008 & 2008 R2. However there are not any network problems so it just leaves the server & Client
    I have searched for possible resolutions including:-
    Turning  off the Cache for the share
    Disabling the network adapter power setting to allow windows to put the device to sleep.
    Disabling  Antivirus/configuring it to ignore folders for on access scanning
    Disabling SMB  Signing
    Configuring the  clients DWORD registry value SilentForcedAutoReconnect=1 in HKEY_LOCAL_MACHINE\Software\Microsoft\CurrentVersion\NetCache
    Setting the "NET CONFIG SERVER /AUTODISCONNECT:-1" to not drop client
    connections
    The last bit of trouble shooting that I can think of is to disable SMB2 and SMB3 as that does a lot of caching and batching of packets which could also be the cause of the problem.
    I have looked at
    http://support.microsoft.com/kb/2696547/en-us
    I have disabled SMB2&3 on the server as that is very straight forward.
    When I get to the section about disabling SMB2 on the client the command fails.
    sc config
    lanmanworkstation depend= bowser/mrxsmb10/nsi
      After running the above command, it returns an error: 
          [SC] ChangeServiceConfig FAILED 1059:
          Circular Service Dependency was specified.
    So it's not worth running the following command:
    sc config mrxsmb20 start= disabled
    I have tried the command on Windows Vista, Windows 7 and Windows 10 just to confirm that it's  nothing to do with any particular PC, machines in Domains and Non-Domain machines.
    So, my questions are:-
    1, is
    http://support.microsoft.com/kb/2696547/en-us actually correct and up to date and for the OSes (Vista, 7, 8, 8.1, 2012 server and Windows 10) with latest updates & service packs?
    2, How do I disable SMB2 and SMB3 on clients for troubleshooting purposes the server to resolve problems with shared files (multi user access)
    3, If I just disable SMB2 & 3 from the server would that force the clients not to use SMB2 when communicating with the server and therefore not caching the directory structure and file not found etc? I have seen posts that suggest this is not the case.
    4. Does sc.exe have a bug in it?
    Thanks in advance
    Rob

    Hi,
    I made a test in our testing enviroment, everything works fine to disable SMB2 and 3. For your problem, in my opinion, as I didn't find any specific report about this error, it would be better to use Process Monitor to capture the trace when running the
    command.
    Start Process Monitor, then set the filter as cmd.exe, after that, open CMD and execute the command.
    Process Monitor:
    http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    In addition, I found another thread that had similar error with yours, you can take its solution as reference.
    https://social.technet.microsoft.com/Forums/windows/en-US/506828c8-e7af-4039-aca7-43321939bb55/offline-files-synchronization-error-the-file-specified-cannot-be-found?forum=w7itpronetworking
    Roger Lu
    TechNet Community Support
    Roger,
    Many thanks for the time taken to look into this.
    I've downloaded process monitor and loaded it. I filtered for cmd.exe started capture and saved a 1mb file.
    However I don't think this is going to help unless you can point me in the direction of what you're expecting to see in the capture file? If you want me to send you it I can but it does contain personal information which I'd rather not place online.
    You can recreate the problem yourself by doing the following:
    Go to modern.ie
    Download any windows 7 virtual machine for your preferred of virtualisation  platform 
    log in, start cmd as administrator and run the command
    sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
    You will also receive the same error.
    [SC] ChangeServiceConfig FAILED 1059:
    Circular Service Dependency was specified.
    You can also try it on the Windows 8 and 8.1 machine if you have time.
    I checked the link to the similar error and that just looks at the file not found problem which is the smb2 cache. They still didn't resolve the slow access to the share which is seen on a machine that has anti-virus on it when you go to right click
    on the folder or a file in the folder. It's about a 20 second (spinning circle) pause every time. The problem is bigger than that. If you have shared files on the network share that are used by multiple people at the same time, say a spreadsheet or database
    file windows is loosing the connection to that file so the user cannot write to it even if they have the file open. The smb2 caching shouldn't cause that problem.
    It appears that I have to disable from SMB2 and SMB3 and ensure that the clients only use SMB1.
    If SMB2 & SMB3 are disabled from the lanmanworkstation service the clients will not do any caching even if the server has disabled the share cache (offline files for that share).
    The problem with the "Circular reference" error message is standard across all versions of windows that have "smb2" or "smb2 and smb3". Can you recreate that problem? Or is it working on your windows computer and on the machines
    downloaded from modern.ie ?
    My testing has shown that the command "sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi" does not work. Therefore that's the one I want to resolve first. By resolving that I may be able to get the clients accessing the share to behave
    themselves and use the shared files correctly as they always did from Windows 95/NT4 through to Windows XP and 2003/2008 server.
    I'm unable to recreate the problem with multiple users having access to shared database files on windows 2012 server from Windows 7 clients were the access to the files drops once a day or once every couple of days.
    Kindest Regards
    Robert

  • BDB support for Windows Vista, WIndows 7 and Windows Server?

    Hello,
    I examine to use BDB on Windows, and I have a question.
    There's a description about supported OSs on the BDB reference guide as follows;
    Where does Berkeley DB run?
    The Berkeley DB distribution includes support for Windows/95, Windows/98, Windows/NT, Windows/2000 and Windows/XP, via the Microsoft Visual C++ 6.0 and .NET development environments.
    Does BDB distribution supports for Windows Vista and Windows Server 2003?
    And it will support Windows Server 2008 and Windows 7?
    I believe that BDB does not depend on specific function of Windows, thus there's no problem to support them...
    Regards,
    Akira

    Yes, we have a plan about BDB support for Windows Vista, Windows 7 and Windows Server. Once we are ready, we'll let you know here.
    Hi Vit,
    For Berkeley DB XML questions, please go to the Berkeley DB XML forum at: Berkeley DB XML
    By the way, I learnt there's a XP-compatible mode in Windows 7. You may want to try DB-XML with that.
    Best regards,
    Chao Huang
    Oracle Berkeley DB

  • Firefox is loading pages very slowly, most of times saying server not found. Same pages loaded quickly in ie9. Previously FF used to load pages fast. FF version 8.0.1, windows vista & windows XP.

    firefox is loading pages very slowly, most of times saying server not found. Same pages loaded quickly in ie9. Previously FF used to load pages fast.
    FF version 8.0.1, windows vista & windows XP.
    Please help
    Generally we dont get any reply to the questions asked here!

    65kid wrote:https://bbs.archlinux.org/viewtopic.php?id=162327
    Thank you for the link, but I am not sure how this is going to help me: I am not booting straight to an X session, but prefer to log into TTY1 and have my login shell handle everything from there.
    Here is the relevant part of my .zprofile:
    if (( UID )); then
    [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec systemd --user
    fi
    As far as I understand, your method works if I enable the [email protected] template when actually booting straight to X.

  • Audigy 2zs Gamer and Windows Vista / Windows 7

    .Audigy 2zs Gamer and Windows Vista / Windows 7? Hello, I am just wondering if it is a known issue to have really loud static and crackling when playing games using this card in Vista or Windows 7. I had this issue playing Bioshock a few months back on my Vista boot. I never figured out a way to resolve it so I belei've I just eventually uninstalled the driver and used the card without a driver install (not sure but I think this what I did). It worked but I might as well of just ran onboard sound...
    Now I have installed and tried to run Windows 7 on a dual boot but I started receiving really loud cracking and popping in Warhammer Online and realized I had not installed a driver for my sound card. I did not expect creative to have a Win 7 driver yet but thought perhaps the Vista driver would work in compatibility mode, it does and sounds awesome and really makes me remember what I am missing without my driver installed on Vista but unfortunatly it randomly starts the crackling and popping again after a while...especially when a lot start happening on screen (pvp raids with many characters on screen and magic effects).
    When the crackling starts happening I have no choice but to exit the game and restart the computer to get rid of the noise, but randomly it comes back after a while during gameplay. So as a temporary solution I have installed my onboard sound drivers and have been using that for sound output and my mic port on my sound card for my microphone. I would REALLY love to get my sound issues worked out in both Vista and Win 7 because it sounds SOOO awesome while it's working, the popping though is terrible, I never had that issue in XP.
    I know this is an older card but any help would be appreciated!?
    Message Edited by grimdeath9740 on 0-4-2009 2:3 [email protected]
    68.95.29.2

    One thing you do need to learn is that SHOUTING IS MUCH HARDER TO READ!
    But, if you are using Audition 1 and it works with XP, then if you have the chance, I'd stick to that on a new machine. Apart from anything else, it's completely untried with Windows7 and with Vista its a) likely to have problems, and b) going to run slower.
    The other part of your question about the 'look' of later versions is that 1.5 looks pretty similar to 1.0, but with 2.0 and 3.0 things have changed somewhat - rather more with Multitrack View than Edit View. Basic operating principle remains the same, though - most people have had very little trouble transferring from one to another.

  • I can't eject the windows vista 64-bit disk.

    So I just upgraded to leopard today, and I want to run boot camp on it. I inserted the windows vista disk like it told me too, unaware that it cant be 64-bit and so it cannot load the setup, so I tried to eject the disk... no luck, I'm not sure what do do, I tried holding the APPLE, OPTION, O, and F key at startup, but it just keeps on trying to load the windows bootloader, where I get the error that the CPU is not compatable.
    Thanks for any help I get.

    command option o f is for booting into open firmware.
    holding down the option key should let you use the eject key.
    holding down the mouse button should open the optical drive.
    and X should take you to OS X, yes.

  • Windows Vista/Windows 7

    I currently am running Windows Vista. I need Windows 7 Is there a free basic version?

    I've installed all vista updates and the other day installed the new version of itunes 7.3 and now i can transfer all info to ipod. However, I have now just been attempting to burn an imported disc and during the intializing period it pops the blanks disc out and says an unknown error occured(2131). Any ideas

  • Mac mini, boot camp, windows vista/windows 7, DVI to HDMI, no display

    I have a mac mini from 2008 on which I have put windows Vista via boot camp. I have connected the mini using DVI to HDMI, to my Sony Bravia 1080p HDTV.
    When I log into the mac 10.6.2, all seems fine and I can see the display alright.
    When I log into Windows Vista, I cannot. The display stays black even though I hear the Windows startup sound.
    I tried force-upgrading to Windows 7 and the same thing. In fact at some point I can see some of the stuff (like when starting in safe mode), but as soon as it boots up, the display goes blank.
    Normally I can see the display up to the point where it says loading Microsoft windows (with the small progress bar) and then, nothing.
    Any clues what may be happening?

    No response

  • Hard drive detected but will not boot Windows Vista or recovery disk

    Hi,
    I have a very similar issue with a HP Pavillion a6355.uk, the hard drive kept crshing windows and then it finally just kept getting pass the HP boot menu options, and then all I get is the DOS "@press ctrl+alt+del to restart".
    The hard drive is detected and passes all the tests, after pressing F9, going into the F10 options. F11 does not do anything, so cannot recover windows/the system.
    I have tried changing the SATA connections on the motherboard, no difference. I tried the recovery boot disk I created when it was working and it will not boot with the old or new hard drive I bought to replace it (same size and compatable).
    I cannot find where to partition the new hard drive or format the c: on the old one (it had D: for the recovery, but as it won't boot, cannot access this).
    I have also tried the HP website to dowload the drivers for the new one, but the page does not load up to show any drivers or Windows to download.
    http://support.hp.com/gb-en/product/HP-Pavilion-a6300-Desktop-PC-series/3644673/model/3671505/driver...
    The next page just keeps looping or not proceeding when I put in details.
    I can’t find anywhere to get hold of my copy of windows vista for this PC or get a disk to re-install on a new drive or fix the old detected drive, can someone please help!!

    Just what size HD and is the drive Sata II or Sata III?
    Vista 32bit .iso    You must have a valid installation key, which should be on the COA sticker on the computer, to activate the installation once it completes.  ImageBurn to create the .iso disk.   Driver page Vista (not 64 bit)
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Which register cleaner or tune up software is the best to use for windows vista,windows 7 and windows 8.1 as professional?

    hi,
    I like to know wich register cleaner or tune up software is the best to use for windows vista- windows7- and windows 8.1.
    I like to know the proffesional  version of it which I can use for my clients  every where  unlimitted to clean unwanted keys  of registry and improve performance.(specialy in Dutch language).
    thanks
    johan
    h.david

    I second what Kate Li said.  There's no need for a registry cleaner!  Don't do it! I run Windows systems for years and they keep running as light and fast as when they're new.
    What I *do* recommend is regularly reviewing the list of programs set to run in the background using a tool to show you what starts in various ways called Autoruns, which can be found here:
    http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
    This tool can be used to disable things you don't need.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • Hot Sync with Windows Vista, Windows 7`

    I have a client with a large deployment of Palm III and Palm IIIc devices. They are looking for a HotSync Manager that is compatible with Windows Vista and Windows 7, and that will still support sync operations with Palm III and Palm IIIc devices.

    http://forums.palm.com/t5/Windows-HotSync/Windows-7-and-Vista-hotsync-instructions-here/td-p/251755/...
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • T61 or Windows Vista used up disk space so fast ?

    Hi,
    Just purchase a new T61 with 140GB hard disk running Windows Vista Business.  After installing Office 2007 Standard and Acrobat v8 Standard.  I realized that I am left with only 13.5GB space.
    My personal data/files only take up about 20-25GB, including email files. What happen to all the storage space ?  Does Windows Vista take up large storage space that "eats up" all my space. ?
    Can someone help.  thanks.

    Hi,
    I tried to load Rescue and Recovery console.  But not able to find the automatic backups option you mentioned ?  Where can I find this automatic backup option ?
    But when I check for Properties of the hard drive.  Under the "Previous Versions" tab which looks like many duplicate backup.  Is this the automatic backups you are referring to ?

  • Error message when launching 7.1 with Vista: Windows wrong volume

    I had to reformat my disc to install Vista and reinstall iTunes. Now I get this message "Windows wrong volume" followed by a long string of numbers, and a box that has 3 choices - clicking on "continue" gets me into the program, but does anyone have an clue as to what to do to get rid of the message?
    I'm lost...
    Thanks.

    MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
    Hello,
    It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
    Microsoft® SQL Server® 2012 SP2 Feature Pack  =>
    ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Launch error for iTunes on Windows 7

    I recently installed the latest update for iTunes on my PC and when I attempted to launch I received an error stating that one of the .dlls "is either not designed to run on Wondows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support." I tried downloading and reinstalling iTunes and also removing and then reinstalling but received the same error. I recently upgraded my PC from Vista to Windows 7 and wonder if it is related to the problem.

    Many thanks.
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • Can't Install iTunes 10.6.3 Windows Vista Windows Installer Problem

    Basically, just before installation completes a popup of "There is a problem with this Windows InstWhat exactly would I be missing??? please help !aller package. A program required for this install to complete could not be run.".  I've read many threads that state that all I have to do is run a repair on the Apple Software Update(ASU) but my problem is that I've already uninstalled it. Now what comes to my mind is that, it wasn't a clean uninstall as I just uninstalled through Add & Remove.
    So I would preferably like to get an answer to the whole problem or if not what files are linked to the ASU that might cause this problem. Please help I've alot of things and I really hope there is another solution then to reformat my PC, I really don't wanna reformat my laptop just for iTunes and because I have an iPhone, I unfortunately, have to depend on having it installed.
    Back story (Why I do not have ASU):
    When I updated my iTunes and several other Apple software, I was unable to start itunes, kept getting a permissions issue. So I set all the permissions to my User Account (note that I am, from the start, using an admin account) but still errors kept popping up. Usually when an update doesn't work I just go through Add & Remove and uninstall all Apple programs before trying to reinstall iTunes and etc, which I did, Except this time...

    Download and save a full itunessetup.exe or itunessetup64.exe file(depends on your operating system).
    http://www.apple.com/itunes/download/
    Use Winrar to unzip the file into a folder. Then right mouse click the file AppleSoftwareUpdate.msi from that folder to install.
    If you don't have winrar, you can go to this link to download a free trial version.
    http://download.cnet.com/WinRAR-64-bit/3000-2250_4-10965579.html?tag=dropDownFor m;pop

Maybe you are looking for

  • Ipod Nano wont auto update anymore ? pls help

    I have been using my Nano for a long time. Recently my daughter got the Ipod shuffle and I was trying to figure out how to make a seperate library for her, which i never figured out. Somehow in the course of trying to figure that problem out I manage

  • Licence IP check only on first interface?

    Hello, our hoster had to change the ip configuration of our machines. We lost the IP mentioned in the licence. So we ordered a new licence via our customer for the new ip (which is configured on hme1, hme0 is the service lan used for backup etc.). We

  • How to get separators from a string

    I need to find the thousand separator, hundred separator and decimal separator from a string. I need to check which separator is available in a string ie., thousand or hundred separator. There may be a case where there is no separators. Please sugges

  • Business Partner extract from R/3 (or SRM) to MDM without XI

    Dear SAP Experts, do you have any solution for extraction of Business Partner data from R/3 (or SRM) to MDM without XI? I know transaction mdmgx and the reference data went to the MDM well. How can I do the same for master data without XI? Please wri

  • No SID found for 0unit

    hi friends im facing a problem while loading the data ......im sending u the error mesage ... could anyone please help in out in solving this No SID found for value 'Day ' of characteristic 0UNIT Error message during processing in BI Diagnosis An err