For query experts

Hi All
Here we have a new requirement from the customer asking us to create a new query.
Now the problem is I have to include the 4 views on the application tool bar, it is similar to that we create 4 buttons on the application tool bar and manage with the user command to switch over the buttons
can anyone help me in the doing it in query(SQ01, SQ02, SQ03)
if u have any queries or any extra information is needed pl contact me
Thanx and regards,
Mahadev Shetty

Hi Mahadev
You can cannot set the PF status in Querry.
The best case is to write an ABAP report instead of a querry or create three different querries.
Thanks

Similar Messages

BEX Query - Run time char InfoObjects manipulation for query results

Hello Experts,
Iam working on BEX queries to meet following requirements,
1) Display only first 2 char of an InfoObject in the query results. Actual infoprovider has 24 char for this InfoObject. Example: Summary code FABCDXXXX.. But we want to show only 'FA' in query results
2) We split a 120 char description into two 60 char InfoObjects, we need to concatenate the split char into one for query result display
3) We need to show a specific hierarchy level, nothing before or after. For example: Eighth level for a cost element hierarchy.
4) We need to show a constant in a column (which is not there in the table)
We are planning to use both BEX analyzer and Crystal for the reports.
I read in one of the thread that we can use formula variables/Customer exit for this but iam not very clear, if you know how to do it or if you have any step by step procedure, can you please pass it to me. Thanks in advance for your help.
Regards,
Raman

Thanks for quick response. We have users who need BEX analyzer, is there any way to handle the above requirments for BEX analyzer.

How to create the layout for query in Bex 3.5

Hi All,
i have one requirement to do layout for query. Report like after passing the variable values and then they will select the required layout. It has to get output according layout selection fields.
i have no idea about how to create layout.
thanks in advance...
Thanks & Regards,
Mallikarjuna.k

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

Error: Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.

Hello,
I have a lightswitch web-application in development, which I need to copy from one computer to the other. I have tried doing it both through Git and by simply copying the solution and opening the project on another machine. The project builds without errors,
but when I try to debug it, it opens a web-browser, loads to 100% and pops up an error - Load operation failed for query 'GetAuthenticationInfo'. The remote server returned an error: NotFound.
Now, I have tried repairing Visual Studio on my machine, reinstalling .NET framework and setting <basicAuthentication enabled="false" /> in web.config, yet it still does not run.
When using Fiddler, it shows an error while loading the application - "HTTP/1.1 500 Internal Server Error" , which I honestly don't know what it means.
The application uses ComponentOne and Telerik modules, but they are both installed on both machines.
The application does run perfectly on the original machine, but it is not working on any other one.
Both machines are using Win 8.1 and Visual Studio 2013 Update 4.
I have tried to look this up online, but most people's problem are when they are deploying the app, not just debugging. I would be really happy for any help with this issue.
Thanks!

I have the same problem on one of my development machines. Whenever I create a new project, the System.IdentityModel.Tokens.Jwt nuget package is not referenced properly. The project compiles correctly but you are not able to debug as I get the same error
as you.
If you open up your references and there is an error next to any of your references make sure that you correct them. In the case of the jwt reference error, I have to remove the jwt reference and then add it back from the packages folder.
This may not be your problem but could point you in a direction?

Transaction Code assignment for Query created in SQVI

Dear All,
Good morning I hope you are doing great...
Can any body help me out to assign transaction code for Query which was created through SQVI transaction.
Regards,
Murali.

Hi Murali Mohan
1>go to SQVI t code and enter your query name and press enter
2>In the menu path select Quick view--> additional functions-->Generate Program
3>After Generating the program In the menu path select Quick view--> additional functions-->Display report Name
4>Now in se38 enter the report name in Program field and execute
5>You will get the Initial Selection screen of the report . Go to Menu of System -->Status
6> Note down the Program name and Screen number
7>Go to SE93 and Create a Z tcode for the query, Enter the description and importantly you have to select the 2nd Option radio Button Program and Selection Screen (Report Transaction) and Press enter
8>In the next screen enter the Report name In Program field and enter the screen number
9>In the classification Section select Professional user Transaction
10>In GUI support section select all the options i.e SAPGUI for HTML,Java,Windows
and save
the system will ask for Package select your package if not there then select local object
now execute the Z tcode your report will run sucessfully
Regards
Vijay hebbal

Change logs for query...........

Hi,
How to check the logs for query changes. Means which user has done what change.In properties we get the last user only.
Is there any way to check the full history of changes?
Can we change that in some transport request?
Bye,
Jeetu

Hi,
There is no such facilities available to find, which user has done what changes in the query. you can only get the last changed 's user name of query. in transport request also you cannot change the query.
To add, check out this:
Tcode SQ01>select 'Environement' from the menu>Directories>All Queries
in the popup window, select a query and click on 'Display' button. you would get some useful information about that query
Bye

Are Cube organized materialized view with Year to Date calculated measure eligible for Query Rewrite

Hi,
Will appreciate if someone can help me with a question regarding Cube organized MV (OLAP).
Does cube organized materialized view with calculated measures based on time series Year to date, inception to date eg.
SUM(FCT_POSITION.BASE_REALIZED_PNL) OVER (HIERARCHY DIM_CALENDAR.CALENDAR BETWEEN UNBOUNDED PRECEDING AND CURRENT MEMBER WITHIN ANCESTOR AT DIMENSION LEVEL DIM_CALENDAR."YEAR")
are eligible for query rewrites or these are considered advanced for query rewrite purposes.
I was hoping to find an example with YTD window function on physical fact dim tables with optimizer rewriting it to Cube Org. MV but not much success.
Thanks in advance

I dont think this is possible.
(My own reasoning)
Part of the reason query rewrite works for base measures only (not calc measures in olap like ytd would be) is due to the fact that the data is staged in olap but its lineage is understandable via the olap cube mappings. That dependency/source identification is lost when we build calculated measures in olap and i think its almost impossible for optimizer to understand the finer points relating to an olap calculation defined via olap calculation (olap dml or olap expression) and also match it with the equivalent calculation using relational sql expression. The difficulty may be because both the olap ytd as well as relational ytd defined via sum() over (partition by ... order by ...) have many non-standard variations of the same calculation/definition. E.g: You can choose to use or choose not to use the option relating to IGNORE NULLs within the sql analytic function. OLAP defn may use NASKIP or NASKIP2.
I tried to search for query rewrite solutions for Inventory stock based calculations (aggregation along time=last value along time) and see if olap cube with cube aggregation option set to "Last non-na hierarchical value" works as an alternative to relational calculation. My experience has been that its not possible. You can do it relationally or you can do it via olap but your application needs to be aware of each and make the appropriate backend sql/call. In such cases, you cannot make olap (aw/cubes/dimensions) appear magically behind the scenes to fulfill the query execution while appearing to work relationally.
HTH
Shankar

How to Create PLD for Query Report

Hi,
We have designed some queries for daily inward / outward register.
For taking Print we need to export data to XL and then need to take print.
Want to set Print layout for Query based report.

hello
after execting the query u ca see save button click on it write query name and query category as general then again click on save button after that just click on open then u select the query and just click on create report and u can see name of ur query and just click on user report and click ok
now go to tool .query->select query print layout--ouble click on ur saved query then ur pld will open set it with its propertites and layouts pls close the thread if ur problem is solved
thank u
ragards
jenni

Need help with LikeFilter for querying the keyset instead of value

Hi,
I'm looking for help with the LikeFilter.
I need to query the cache to get all entries with key starting with a particular string.
I could see samples using LikeFilter for querying the values in the cache but not the keyset.
Can someone help?
E.g:
Cache Entries:
abc123 - value1
abc234 - value2
bcd123 - value3
I want to get all entries with key starting with 'abc'.
thanks,
rama.

NJ, thanks for the quick reply.
I tried something similar (as below) but this code gives me 'java.lang.NoClassDefFoundError: com/tangosol/util/ValueExtractor'.
KeyExtractor extractor = new KeyExtractor("getKey");
Filter filter = new LikeFilter(extractor, id+":%",'-',false);
-rama.
Edited by: 911950 on Feb 2, 2012 1:18 PM

Variable Screen for query view is hidden

Hi All,
   I caome across an old query in BW 3.5 which is haiving some mandatory variables. There is a query view for the same query but when i am executing the query view i didn't got any variable screen and its running for some predefined value. How one can hide the variable screen for query view.
   How can i achieve the same for a BI 7 query view. Please guide.
Regards:
Jitendra

Hi Rakesh,
    What you said is right but my concern is that next time when i open the query view variable screen shouldn't appear ie should run with previously stored variable values. I am working with BI 7 query view. Please guide.
Regards:
Jitendra

Building Cascading Lists for Query Screens with ADF Business Components.

I build Cascading Lists for Query Screens with ADF Business Components. When I to select master list first working fine, but when I to select master list second returned error : JBO 25013 : Too many objects match the primary key oracle.jbo.key[CN]. CN dependences with key to detail list (Countries in this case). Please help me.
Andrew.

You would have a better chance, that someone answers your question, if you choose the right forum:
JDeveloper and ADF

Building Cascading Lists for Query with ADF Business components and JSP

I build Cascading Lists for Query Screens with ADF Business Components. When I to select master list first Ok, but when I to select master list second returned error : JBO 25013 : Too many objects match the primary key oracle.jbo.key[CN]. CN dependences with key to detail list (Countries in this case). Please help me.
Excuse me for my English.
Andrew.

You would have a better chance, that someone answers your question, if you choose the right forum:
JDeveloper and ADF

Error on Transaction Code for Query

Hello, Masters
I have a problem with a transaction for query, I hope that you can help me.
On transaction SE93 I create transaction ZRH11,
I choose transaction with parameters.
On Transaction field the value is START_REPORT
The checkbox skip initial screen is marked
The checkbox for SAP GUI for html, java and windows are marked
Parameter D_SREPOVARI-REPORTTYPE = 'AQ'.
Parameter D_SREPOVARI-REPORT = 'RHCYA' is the users group this group is global
Parameter D_SREPOVARI-EXTDREPORT = 'ZIT0015' is the query
Parameter D_SREPOVARI-VARIANT = 'STANDARD'
R/3 says that the transaction is consistent, but at the time that I want to run send the message "User group RHCYA has not yet been created"
The user group is created, what's wrong???
Thanks
Omar

Hi Omar,
Please try to Use the User group as "RHCYA1". For some reason, it doesn't take the user group as it is and we need to append some character to the user group at the end. Not sure why it does so. Please use RHCYA1 and see if it works. Hope this helps. Thanks
Hari

Can we create range variable for Query Key Date

Hello Gurus,
Can we create a range variable for Query Key Date ? when I tried to give a range of values for Query Key Date, I am unable to find Range Values option. I found only Single Values.
so, Please let me know if we can use Range variables for Query Key Date ??
Thanks in advance,
Regards,
Aarthi

Hi Aarthi,
This is relevant for the time dependant master data that is being pulled in thw query. Like if you are using a nav attr in the query and this nav attr is time dependant, then which record (from the char master data) is to be pulled into the report, depends upon the key date that you specify.
The default key date value is the date on which the query is executed, that is <Today>.
Hope this helps...

For query experts

Similar Messages

Maybe you are looking for