BEX Query - Run time char InfoObjects manipulation for query results

Hello Experts,
Iam working on BEX queries to meet following requirements,
1) Display only first 2 char of an InfoObject in the query results. Actual infoprovider has 24 char for this InfoObject. Example: Summary code FABCDXXXX.. But we want to show only 'FA' in query results
2) We split a 120 char description into two 60 char InfoObjects, we need to concatenate the split char into one for query result display
3) We need to show a specific hierarchy level, nothing before or after. For example: Eighth level for a cost element hierarchy.
4) We need to show a constant in a column (which is not there in the table)
We are planning to use both BEX analyzer and Crystal for the reports.
I read in one of the thread that we can use formula variables/Customer exit for this but iam not very clear, if you know how to do it or if you have any step by step procedure, can you please pass it to me. Thanks in advance for your help.
Regards,
Raman

Thanks for quick response. We have users who need BEX analyzer, is there any way to handle the above requirments for BEX analyzer.

Similar Messages

Where can I download Run-time engine 6.1 for Mac OS

When trying to run an executable I receive a message "Could not load LabView Runtime Shared Library: err = -2804, "Labview 6.1 Runtime". I did not see Run-time engine 6.1 for Mac OS 9 available for download. I only saw version 6.0.2. Does anyone know where I can download version 6.1??

Hi majo008,
If you click on the 'Drivers and Updates' under 'Option 3' on the Technical Support page (www.ni.com/support), you can select 'All Software Versions' and choose 'LabVIEW >> Run-Time Engine'. This page will then have a link to the LabVIEW 6.1 Runtime Engine for Mac OS.
Have fun!
- Philip Courtois, Thinkbot Solutions

Exporting BEx Query results to CSV or other files.

Hi All,
We have a report designed in WAD, which uses a BEx query to display department’s information. Because of amount of data in the results it crashes when u get all the Free Characters into ROWS(Error is : Result set too large(552244 cells); data retrieval restricted by configuration (maximum =500000 cells). It is a requirement from the user to have all the free characteristics in the rows( which I can understand is not the right way to go ahead). As it is crashing when you add last characteristic(WBS Purpose) into the rows, they aren’t able to export data into spread sheet from the results. (as there are no results)
Now my question is…..is there any way we can export the results from BEX query into any format for example text or csv? If yes, can we schedule that process? Please note that this characteristics are displayed as hierarchies.
Am new to SAP BW and its been only six months since I have been in this role. Any help would be much appreciated???
I looked online and some where in the forum it was mentioned of using program RSCRM_BAPI, but looks like it needs some sort of downloads from SAP.
Is there any other way to export the BEx query results?
Cheers
Sandeep

Hello Sandeep,
You can use the Item "Context Menu" in your WAD and in the properties by default you can see the Options:
Export to Excel & Export to CSV will be there and also there are many options which you wanted to see.
It works for you!!!
With Regards,
PJ.

Run time error in report for a particular month : " TIME_OUT"

hi frends, we have developed a report for PM module in SAP. it is a monthy report. and user have to enter the month for which he wants to see the report. we are facing runtime error for a particular oct. and nov month of 2009 only , all other months are working fine. The error is :
The program "ZPMR_EQUP_PERFORMANCE_REPORT" has exceeded the maximum permitted
runtime without
interruption and has therefore been terminated.
what could be the reason.

Hi Achalmehra,
By seeing the run time error "TIME_OUT", I suspect this is due to Performance issue.
There is a chance that they had huge data dump into PM server from other servers and there is also chance that
They have many records available for these 2 months.
IN any case, please chk with Run time analysis (SE30) by executing your program...
If it displays the graph more than 30 % for Database then it is an issue with the Performance.
Also chk with SQL trace.....
Second case :
Check you had not used Nested Loops, Select queries in Loop.
Make sure you use Binary search for Read Statements....
Third : Chk with the runtime error at which place of the code it is throwing Time_out error at Source code extract.
To help you further, please paste your code here and also paste the Run time error that you receive with the select queries.
Regards,
Kittu

Using run-time prompts in BRs for Planning 11.1.1

Hi to all!
I want to create a run-time prompt for periods for which the calculation is to be done in my business rule. So via Tools>Variables I created a global variable of MemberRange type, then I inserted this variable in the Fix statement of my business rule in Calculation Manager but the validation of the rule fails stating that the BR has a run-time prompt which is not allowed. I have not found anything in the documentation on how to allow runtime prompts in a BR, so I would be very grateful for hints on how to correct it.

Hi,
For global variables:
Run EAS console
Right click on your Essbase server (e.g. localhost)
Edit - Variables
Set names and values of global variables for all apps and all dbs (if you need so)
These names of global variables you can use in your BRs and CalcMngr scripts.
For local BR variables:
Run EAS
Create new BR
Go to "Variables" tab
Add local variables as "Member" type / "Run-time prompt" usage type
These names of global variables you can use in your BRs scripts.
For global BR variables:
Run EAS
Open BR - Global variables
Create new global variable as "Member" type / "Run-time prompt" usage type
These names of global variables you can use in your BRs scripts.
Edited by: Antony NoFog on 08.02.2010 18:05

HT1645 I had about 1:40 run time on my video for DVD and chose "professional" as I didn't need to rush. Got Multiplexer Error message. Found no reason or fix for this situation. What am I to do to fix?

This site doesn't seem to get answers. I typed the problem above, then it asks same question before post. What help is that? Needs to be clearer what it wants from me. Others seem to have same issues with iDVD's clarity of information. I have been editing for 12+ years and still can't figure out solutions more than trail and error.

Hi
1:40 - can mean 1 sec 40 frames - or - 1 minute 40 seconds - or - 1 hour 40 minutes
1 hour 40 minutes is 100 minutes and iDVD only cares about duration
• Pro Quality encoding - up to 120 minutes (movie + menu) (menu can be 15 minutes or even more
• Best Performances - up to 60 min. - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) up to 120 min. - slightly lower quality than above
Reg "Multiplex Error" - This is a tough one and can have a lot of reasons. Read on
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Retrieving BEx Query Results Area for use in Excel formulas

Hello,
I run BEx queries in workbooks and then use Excel formulas ( mostly VLOOKUP(LookupValue, ResultsArea, ColumnReturned,) ) to retrieve certain information from the query ResultsArea.
****Problem:
Depending on the query parameters, the query "Results Area" is larger or smaller.
****Non-optimal solution:
One way to define the ever changing Excel range occupied by the Results Area is to create an Excel name as:
QueryRange = OFFSET(QueryFirstCell,,,COUNTA(OFFSET(Sheet1!$A:$A,,COLUMN(QueryFirstCell)-1,,)),COUNTA(OFFSET(Sheet1!$1:$1,ROW(QueryFirstCell)-1,,,)))
Then, the only input required is the top-left cell of the Results Area, which stays the same (unless the query definition changes).
****Question
What is the best way to refer to an ever-changing query Results Area in an Excel formula?
Thank you!
Louis

It is actually much easier than that.
Use a VBA statement like the following:
Set RptRng = ActiveCell.CurrentRegion
This will retrieve the data in the Results Area, no matter what the size is.
Hope this helps...
Bob

Is it possible to preserve dynamic run-time shortcut menu updates for a control?

Hello all,
I have a question about getting control run-time shortcut menus to persist after adding new items. I am hopeful that I'm simply missing something simple here.
Known Information
I understand the use of the "Shortcut Menu Activation?" event (for the control of interest) which provides the relevant control's menu reference for use with the menu VIs. No problems there.
Problem
I start with a control which has an .rtm file assigned as its run-time shortcut menu.
I then generate new items dynamically using the event/menu mechanism noted above.
The problem is that there doesn't seem to be a way to *preserve* those newly added items (ie. I have to re-create the new items everytime the menu is *activated*).
What I observe is that, unless I add all the items every time the right-click event occurs (in the "Shortcut Menu Activation?" event case), it defaults back to the original .rtm menu state.
Question
Does anyone know how to either:
get dynamically added menu items to "stick"
perhaps dynamically create (new) and load an .rtm for a *control*
Thanks in advance for any thoughts. I'm working in LabVIEW 8.6 for this particular project.
VM

Looking at the second post link, it seems like you are trying to populate 10,000+ shortcut items on the Shortcut Menu for the control. I'm guessing these are tiered, since I don't think all of them would fit on the screen. If they are tiered, have you tried populating only the top level short cuts, and then populating more as the user navigates down the tree?
- Regards,
Beutlich

BEx-Query results in error in SAPLRRI2 and KFB_FUELLEN_CONST

Hello,
I hope anyone has a solution for the following problem.
When applying the "Calculate with Attributes"-how-to, I got the following error message
in a BEx-Query. It is reproducable and only occurs if I have a formula A minus B
(key figure A alone and B alone work and A minus 123 also works; plus or multiply also do not work).
It occurs before the parameter call, although the parameter is only a global filter.
Unfortunaltely I had to translate the essential content of the error messages,
for I only have the German ones.
In the web I get (The proposal for characteristic ... does not fit to the filter.):
Es wurde eine Abbruchmeldung gesendet.
WARNING BRAIN (459): Die Vorschlagswerte für Merkmal ZMLST_USE stimmen mit dem Filter überein
MSGV1: ZMLST_USE
ABEND RSBOLAP (000): Programmfehler in Klasse SAPMSSY1 Methode : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION----
In the query designer I get (Systemerror in program SAPLRRI2 and form KFB_FUELLEN_CONST):
Abbruch: Systemfehler in Programm SAPLRRI2 und Form KFB_FUELLEN_CONST -01- (Langtext beachten)
Diagnose
Dieser interne Fehler ist ein gezielter Abbruch, da ein Programmzustand vorliegt, der nicht vorkommen darf.
Vorgehen
Analysieren Sie die Situation, und verständigen Sie SAP.
Wenn der Abbruch bei der Ausführung einer Query, eines Web Templates oder bei der Interaktion im Planning Modeler aufgetreten und dies reproduzierbar ist, nehmen Sie ein Trace auf (Transaktion RSTT).
Weitere Informationen zur Aufzeichnung eines Trace finden Sie in der Dokumentation zur Trace-Tool-Umgebung sowie im SAP-Hinweis 899572.
Has anyone a clue? I use SAP BW 7.0 with a version from last summer.
Best regards
Thomas
P.S. I think the following old note "UNCAUGHT_EXCEPTION and filter of items or input help" (SAP Note Number: 950992) does not apply.
P.P.S.
See also thread "Error while executing query on portal-SAPMSSY1 method : UNCAUGHT_EXCEPTION"
Recommended help are:
- "rebuilding the query and adding 0FISCVAR last"
- "standard variable (filter on company code). I change it with another"
- "reducing the BW OLAP Cache from 5 GB to 1 GB" (we have only 200 MB)
- "Query Properties in the Variable Sequence Tab and remove any variable that is not being used"
- At least till Spring 2008 seemed to be a problem in the SAP software, may be still be a problem.
P.P.P.S.
Found a workaround to design my query. But I still wonder why this does not work.
Error message seems not appropriate for the problem, if any.
Edited by: Thomas Köpp on Mar 10, 2009 3:36 PM

Hi Thomas,
I am experiencing exactly the same issue and after debugging my report on RSRT TCODE I get exactly the same exception error message: "KFB_FUELLEN_CONST-01-" on Program: "SAPLRRI2".
Can you share please how you corrected the issue and/or what was the workarround you performed?
Thanks in advance

BEx Query results not getting updated

Hi,
I am using a BEx Query based on a multiprovider which is fetching data from a multiple remote cubes and multiple regular cubes.
Now when data in the source system is getting changed the corresponding remote cubes are getting update but query result are not getting re-fresh for at least 2 hours.
We have already tried doing logging out and and logging into the bex system.
Is there some cache setting which is required?
Default cache mode in query is 'Main memory cache without swapping'.
Kindly advice.
Regards
Vivek

Hi,
Just generate your query once with program RSR_GEN_DIRECT_ALL_QUERIES.
By selecting your multiprovider .
Thanks,
Ranjan

Output of BOBJ (Web Intelligence Reports) are twice BEx Query Result

Hi Experts,
Incase of first level of hierarchy, correct values (i.e same as BEx Query) are displayed in BOBJ reports . However on selecting two and more levels of Hierarchy, values,twice the corresponding BEx query values, are displayed in BOBJ reports .
For e.g.
For level one of hierarchy (one level of object from hierarchy ):
Actual Amount keyfigure value in BEx Query : 100
Actual Amount keyfigure Value in BOBJ Report : 100
For if we select two and more levels of Hierarchy, then we get following inconsistent values:
Actual Amount keyfigure value in BEx Query : 100
Actual Amount keyfigure Value in BOBJ Report : 200
We have implemented SP5 ,as suggested in SAP note 1373220 . However issue still persists...
Can you please suggest, how to resolve this issue?
Regards
Mohit

We had the issue close to your issue. Basically, Webi does a Cartesian product of the characteristics value and duplicate the number of rows. But when we add the key figure in the report, it was showing the correct result.
Not sure, why the Key figures are also duplicating in your case. Please try adding removing characteristics and see if that resolves your issue.
- Danny

Run time error while reconcillation for sub contracting challan

Hi,
Gurus please solve this issue ,
When i am trying to reconcillation for sub contracting challan against the GR DOC number.When we are assing the quantity for challan and save at that time i am getting abap dump

Analyse in ST22
U may take abaper help

[SOLVED]Run-time error in calculator. Wrong results.

I've tried running the program a couple of times noticing that only the division returns the correct answer.. Here's the code:
* File: Guical.java                    *
* Author: Richard JR Wallnerstrom     *
* Date: 2007-05-09 -                 *
* Copyright: GNU Public License       *
import javax.swing.*;
import java.lang.String;
public class Guical {
     public static void main(String[] args) {
          double sum = 0;
          JOptionPane.showMessageDialog(null, "V??lkommen till Guical!"); // Welcome the new user
          String num1 = JOptionPane.showInputDialog("Skriv in det f??rsta talet");     // Ask user for the input
          String num2 = JOptionPane.showInputDialog("Skriv in det andra talet");
          String operator = JOptionPane.showInputDialog("Skriv in ??nskad operator");
          try {
               switch (operator.charAt(0)) {
                    case '+': sum = Double.valueOf(num1.trim()).doubleValue() + Double.valueOf(num2.trim()).doubleValue();
                    case '-': sum = Double.valueOf(num1.trim()).doubleValue() - Double.valueOf(num2.trim()).doubleValue();
                    case '*': sum = Double.valueOf(num1.trim()).doubleValue() * Double.valueOf(num2.trim()).doubleValue();
                    case '/': sum = Double.valueOf(num1.trim()).doubleValue() / Double.valueOf(num2.trim()).doubleValue();
               JOptionPane.showMessageDialog(null, num1 + " " + operator + " " + num2 + " = " + sum);
          } catch (NumberFormatException nfe) {
               JOptionPane.showMessageDialog(null, "Ej giltigt tecken: " + nfe.getMessage());
}Seems fine to me so if you find anything please let me know.
Regards
Richard
[edit] SOLVED.. Forgot the "break" statements...
Message was edited by:
richardinho

you forget your break keywords. without break, your execution will continue on next case, not getting out from switch block.
switch (operato....) {
   case '+' :
      sum = 1 + 2;
      break;
   case '-' :
      sum = 1 - 2;
      break;
}

BEx query : results and exceptions

Hi people,
I'm using BI 7.
I've two questions.
In a first part i want to know if i can use an exception in order to color all the line (characteristics + key figures) ?
Because just the key figures are colored with many options I tried.
In a second part, in the same query, i'm using a hierarchy, some characteristics and a key figure.
I want to have a line of results for each hierarchy node (node at the top), and too a line of results for a following field.
Like the following example :
Hierarchy node level 1:A field1:2 field2:x k_fig:17
global result for field1----k_fig:17
Hierarchy node level 1:A field1:1 field2:y k_fig:12
Hierarchy node level 1:A field1:1 field2:x k_fig:3
global result for field1----k_fig:15
global result for hierarchy node level 1-----k_fig:32
Hierarchy node level 1:B field1:1 field2:z k_fig:4
global result for field1----k_fig:4
global result for hierarchy node level 1-----k_fig:4
I hope you could help me for the two problems.
Points will be assigned,
Cheers,
Vince
Edited by: vince ricard on Apr 2, 2008 6:39 PM

Nobody has a solution in order to highlight the whole row (characteristic and key figures) for a value of a key figure ?
With WAD or Query Designer, I'm trying to highlight a line with an exception on a key figure but it apparently colors only key figures.
For example i would have entire colored rows for negative key figure :
field1:a field2:x field3:e key_figure:1
field1:b field2:x field3:e key_figure:7
field1:b field2:y field3:e key_figure:-5
field1:d field2:z field3:j key_figure:1
I can use WAD or Query Designer but not Visual Composer or Report Designer...
Thanks for help.

Use BEx query results from a FM in a Transformation to Infocube

I am trying to use the Function Module RRW3_GET_QUERY_VIEW_DATA to execute a query and read the results from E_CELL_DATA. The issue i am having is that i get the keyfigure values but not the characteristics values. Is their a new FM that i could use to read the data from a query. I need to call this FM in a transformation and update a field during dataload to cube.
Thanks
Points will be awarded

Hi,
this FM is the right one.
See in debugger. There is an internal table with fieldname AXES - with a deep structure.
Sven

BEX Query - Run time char InfoObjects manipulation for query results

Similar Messages

Maybe you are looking for