Getting Employer Discount at 3rd Party Store

Hello,
I was thinking about signing up with Verizon and doing so at a 3rd party store since it has the phone I want at a better price. I also work at a school district that receives an employer discount on my bill from Verizon. My question is how would I be able to get that discount added to my account and still sign up for Verizon at the 3rd party store?
Thanks!

Sign up for the discount separately after you set up your account.
It can be done at the link below:
Employee Discount Eligibility Form

Similar Messages

How do I get my iWork'09 3rd party Keynote themes into Keynote 6.0?

1. I had iWork '09 installed on my computer from the old installation disk. It was not clear at the keynote that I would receive the updates for free as I already owned them. I was expecting to see the updates when I opened up the App Store, but they were not there which gave the impression that I was SOL since I didn't purchase them through the App Store. I even received the message "[App name] is already installed, purchase anyway?", but that message is cryptic and not clear that I was going to receive the update, so I wound up purchasing the iWork apps again, just to wake up this morning to find out that I should have received them for free. I am truly hoping for a refund, because at $20 each, that's a big difference between that and free.
2. I opened up keynote to play with the new features, but because the internal architecture is different, it no long references my old themes folder in Library > Application Support > iWork > Keynote. I have tried copying the files to other permutations of possible reference folders in the global and user libraries, but have had no success. These 3rd party themes were not cheap either. I'm sure there is a way to get them to show up in the Keynote Theme Selector, but I haven't stumbled on it yet. Does anyone have any suggestions?

Thanks for the link to the troubleshooting tips! It contained the correct answer which is:
"If your documents or changes still don’t appear, try creating a new document on your iOS device, and then check again for existing documents from iCloud to appear".
I created a test document in Pages and when I returned to my documents all the documents from iCloud reappeared.

Anyconnect Getting certificate from trusted 3rd party vendor

Hi everyone,
I have configured the Anyconnect in network.
Now i need to get cert from 3rd party vendor so that when users login they should not get warning that this network is untrusted.
Need to know what info i need to get from ASA so that i can get the SSL cert from the vendor?
Also need to know if i can enable user authentication based on this cert also?
Currently auth is done via radius?
Regards
Mahesh

Each issuer's requirements vary but you generally need to submit a CSR (Certificate Signing Request) to the issuing Certificate Authority (CA). They will sign and issue a certificate for your ASA and email it back to you (or send you a link to download). You'll then have a certificate (file) to install on your ASA.
See the link here for some more details on installing and using the certificate.

Getting Adobe Extensions and 3rd Party Plug-ins into PSCC 2014; how do I do it?

How do I get my Adobe Extensions and my 3rd party plug-ins into PSCC 2014?

According to what it says in Why is everything new apps in 2014 update? you need NEW, since the format is different

3rd party stores

Did anyone realize there are third party stores? I resold a phone back to a third party store for 170 dollars. Bought a case and was told I would be able to use the gift card towards my bill. Well apparently I can't because it is a third party store and not a corporate Verizon store. So now I am stuck with 147 dollars on a gift card for accessories that I could only use in 3 small Verizon "third" party stores that literally have nothing. Be careful people when you deal with these stores and what you sell back or purchase from them. Lesson learned!

Yep, for over 8 years, the only Verizon Wireless store within 20 miles of my home was a premium third party retailer for Verizon Wireless.. Now Alltel is part of Verizon Wireless here and that corporate store is available and the third party retailer is closed.

Can't get all of my 3rd party plugins to show up in PSE 12

I just upgraded from PSE 10 to 12. I was able to get my NIK and my Topaz folders to show up under the filters menu, but not my Alien Skin (Bokeh 2) folder

You should always check with the developers for third party plugins to be sure they're compatible with new versions. Often they require updates to work properly.

Can you get education discount in the app store?

is it possible to download things like Final Cut Pro X with an educational discount? I know it's not as costly as Final Cut Pro 7 was but it's still good to know!

Hi..
Read here > Apple - Education - Volume Purchase Program

How to PERMANENTLY get rid of 3rd party Plug-ins in Logic pro 9.

Hi, im trying to get rid of some 3rd party plug-ins on logic, but it only looks like i can disable them. (sweeping them under the rug isn't helpful) This is a problem because i have one version of a plug-in that doesn't work and im gonna get another of the same version (with expansions) to replace it so im concerned that the 2 versions will conflict with one another and i wont get the expansions i payed for. Anyone have a solution to permanently get rid of plug-ins? -Tim

The component files of the third party plugins are in:
Local Drive\Library\Audio\Plug-Ins\Components
You can make a backup of a given component (say in a desktop folder) and replace the component with other version etc.
You can use [Pacifist|http://www.versiontracker.com/dyn/moreinfo/mac/12743] as well to install/extract a component from a given installation pack etc.
Edit: Sorry Immo I duplicated your reply solutions hitting posting a few sec. later...
!http://img59.imageshack.us/img59/4967/aglogo45.gif!
Message was edited by: Vacheto

ICal server and external invitations via 3rd party mail server

Hi everyone,
OS 10.6.5 Server:
Services running
AFP
DNS
iCal
Open Directory
Push Notification
We are currently testing iCal server and have configured it to send out invites via our mail server (which is running on a different server) by creating the com.apple.calendarserver user on our mail server.
Email notifications are then configured under the Enable Email Invitations tab in the iCal service of Server Admin as follows:
IMAP
Email address: [email protected]
Incoming server: mail.mytest.com
Port: 143 (not using SSL)
Username: com.apple.calendarserver
Password: secret
SMTP: mail.mytest.com
Port: 25 (not using SSL)
Server requires authentication
Username: com.apple.calendarserver
Password: secret
My test OD users are able to send out invites both internally to other iCal users and externally via email.
So for example, I invite someone to a meeting and enter their gmail address ([email protected]), the invitation goes out correctly - when I log into gmail I see the invitation.
When responding to the invitation (clicking Yes), the mail server receives the response from gmail and the iCal server collects the message via IMAP.
However, the iCal server doesn't seem to parse the received email correctly as I get the following error in the iCal error logs:
[twistedcaldav.extensions#info] Cannot authenticate proxy user 'com.apple.calendarserver' without X-Authorize-As header
2011-03-03 17:44:03+1100 [-] [mailgateway] 2011-03-03 17:44:03+1100 [AuthorizedHTTPGetter,client] [twistedcaldav.mail#error] Mail gateway failed to inject message <[email protected]> (Reason: 400 Bad Request)
2011-03-03 17:44:03+1100 [-] [mailgateway] 2011-03-03 17:44:03+1100 [AuthorizedHTTPGetter,client] [twistedcaldav.mail#debug] Failed calendar body: BEGIN:VCALENDAR
2011-03-03 17:44:03+1100 [-] [mailgateway] VERSION:2.0
2011-03-03 17:44:03+1100 [-] [mailgateway] CALSCALE:GREGORIAN
2011-03-03 17:44:03+1100 [-] [mailgateway] METHOD:REPLY
2011-03-03 17:44:03+1100 [-] [mailgateway] PRODID:-//Google Inc//Google Calendar 70.9054//EN
2011-03-03 17:44:03+1100 [-] [mailgateway] BEGIN:VEVENT
2011-03-03 17:44:03+1100 [-] [mailgateway] UID:43121576-1183-40C8-82D8-A052754AD1CE
2011-03-03 17:44:03+1100 [-] [mailgateway] DTSTART:20110406T080000Z
2011-03-03 17:44:03+1100 [-] [mailgateway] DTEND:20110406T090000Z
2011-03-03 17:44:03+1100 [-] [mailgateway] ATTENDEE;[email protected];CUTYPE=INDIVIDUAL;PARTSTAT=DECLINED;RO
2011-03-03 17:44:03+1100 [-] [mailgateway] LE=REQ-PARTICIPANT;X-NUM-GUESTS=0:mailto:[email protected]
2011-03-03 17:44:03+1100 [-] [mailgateway] CREATED:20110303T062518Z
2011-03-03 17:44:03+1100 [-] [mailgateway] DESCRIPTION:
2011-03-03 17:44:03+1100 [-] [mailgateway] DTSTAMP:20110303T064335Z
2011-03-03 17:44:03+1100 [-] [mailgateway] LAST-MODIFIED:20110303T064335Z
2011-03-03 17:44:03+1100 [-] [mailgateway] LOCATION:
2011-03-03 17:44:03+1100 [-] [mailgateway] ORGANIZER;CN=com.apple.calendarserver+07b1c044-9d98-4cdc-afe3-48139218ee35
2011-03-03 17:44:03+1100 [-] [mailgateway] @mytest.com:urn:uuid:B72794FB-3242-48D7-AC22-A584D279B9F9
2011-03-03 17:44:03+1100 [-] [mailgateway] SEQUENCE:3
2011-03-03 17:44:03+1100 [-] [mailgateway] STATUS:CONFIRMED
2011-03-03 17:44:03+1100 [-] [mailgateway] SUMMARY:one more test
2011-03-03 17:44:03+1100 [-] [mailgateway] TRANSP:OPAQUE
2011-03-03 17:44:03+1100 [-] [mailgateway] END:VEVENT
2011-03-03 17:44:03+1100 [-] [mailgateway] END:VCALENDAR
2011-03-03 17:44:03+1100 [-] [mailgateway]
I have set a rule on our mail server to bypass any spam filtering for all messages sent to the [email protected] address, but this doesn't seem to make any difference.
Does anyone else have this working ? Any ideas ?
Many thanks
Message was edited by: gen_bunty
null

The issue is not "user authorization". The issue is that the 3rd-party service does not accept all incoming relay requests unless there is authentication with a registered account (which we have). This protects the 3rd-party service from becoming the relaying host for the universe's spoofed and anonymous spam. My deduction is that there is no mechanism in UTL_MAIL to designate not only the 3rd-party ip-address:port (by-passing the local sendmail server) but also providing the username:password for the account there for authentication.
Plan A: I have attempted to follow directions for client-side SMTP Authentication for Relaying on the sendmail.org site.
I have not been successful in completing a simple mailx interactive test, much less completing a UTL_MAIL configuration.
I am scouring the user universe for someone who has put all the pieces together successfully and can advise. . . .
Edited by: StevenInTallyFl on Mar 26, 2010 3:50 PM
to clarify that I cannot get from UTL_MAIL to 3rd-party IP directly

Communicating with a 3rd party system using webservices

Hi all,
I have a scenario
3rd party <-> XI<->CRM.
here im using SOAP between 3rd party <->XI, xi<->CRM im using ABAP proxies.
scenario 1. 3rd party would send messages(client request) to cRM to get some data. CRM has to respond for that.
scenario 2. CRM would request the 3rd party to get some data, then 3rd party would respond.
scenario 3. there is no request from 3rd party but crm has to send the data.
So 3rd party would communicate using webservices sends the request to cRM. if there is any request from cRM then 3rd party have a webservice to serve.
My question is
1) for cRM side i should create a webservice? if i create this where shold i create? i mean i should put this webservice on WAS of CRM or on XI ? If i create this webservice and put on CRM WAS, could this communicate with XI by using ABAP proxies? when CRM sends a request to 3rd party, to send this i should create another webservice ?
could you please anyone tell me about this?
thanks a lot in Advance

Hi,
<i>for cRM side i should create a webservice? if i create this where shold i create? i mean i should put this webservice on WAS of CRM or on XI ? If i create this webservice and put on CRM WAS, could this communicate with XI by using ABAP proxies?</i>
As to your first question, you dont have to create webservice on CRM side, all you have to do is to define an outbound interface in XI, and generate proxies for that outbound interface in CRM.
<i>when CRM sends a request to 3rd party, to send this i should create another webservice ?</i>
You havent specified who the 3rd party is DataBase/R3/etc. Let us assume the end system is truely external from your landscape. if the 3rd party provides you with a webservice, you can import taht webservice into XI and use it as an inbound interface.
Hence, you would then map the outbound interface from CRM-> XI to your inbound interface XI->3rd party.
3rd party provided webservice could be written in java/.net.
Naveen

What should be the setup if you want RFC rely on a 3rd party apps' data?

Is it possbile to maintain the master record like purchasing group, material group, purchasing org,etc.. by taking it from a 3rd party software? The client wants it that way so less work for the functional to do the configuration.
Is there a bapi that could get it from the 3rd party app other than accessing sAP tables directly?
Or should I create a function module that woould create purch_org/grp, matrl_code, gl_acct, wbs, etc?
The setup is: we have a .net web apps as frontend and rfc as backend. SAP has no data yet.. And their plan is to get the data from the 3rd party.

Hi,
I wont suggest to completely rely for all the database table on 3rd party system. For each & every validation, you need to call an RFC & check the 3rd party database tables & again send the results back to R/3.
Also for each database update, RFC's would be called. This would be time consuming & wont give a realtime interface if the network is not upto the requirement.
Best regards,
Prashant

Store documents in 3rd party repository

Hello. Is anyone familiar w/ storing documents (text, pdf, etc.) in a Filenet repository? Currently we have users storing docs in the ecc database (oracle). Since our company already has Filenet for other (non-SAP) document management I thought I could somehow configure SAP to store the docs/images there. I see Filenet has some connector product (one for imaging and one for documents) so does that mean I cannot do myself? That I need a license (and extra cost) for the Filenet connector? Was hoping I could do something without a 3rd party product? Any info on how to get started configuring (or even get started with a DMS ) would be greatly appreciated. Thanks in advance and have a nice day.

I have created a new Repository entry ZDMS and a new entry in tcode OACT... i am still getting an error...
here is the error
Input values must be defined in Table TOAOM. The value or values 'ZED ' are not specified in this table.
When the users are in the CV01N transaction they type a new name for the document and then the document type in ZED is chosen in the pull down.
I am familiar with the data in TOAOM for archivelink... I create an OAC0 entry and then an OAC2 entry and then update the OAC3 entry (which is the TOAOM data).... I am not sure which SAP_OBJECT and AR_OBJECT is being used in the CV01N transaction.
In OAC2 I can create ZED if needed with the document class *dwg?
where is documentation to explain the other steps needed?
thanks for your time.

Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

Hi SAP Guru´s,
Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
This creates more issues at the store end as well as affecting business.
We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
Thanks in Advance.
Thanks & Regards,
P.P.Shankar

Hello Shankar,
Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
See if it helps. The best option would still be that the 3rd part system considers the activtion date.
Kind Regards
Kaizad

All 3rd Party PlugIn Pref's get reset after InDesignCrash

AdobeInDesignCS 6
Steps to reproduce
1. Install third party plugins
2. Create Preference Settings
3. save and quit out of InDesign
4. launch InDesign, Verify pref settings.
5. Force Quit InDesign
6. Launch InDesign/Verfiy pref settings and they will not be there.

Well, now it's official, thanks to 3rd party apps and/or faulty system software my iPod is Dead.
When I created this thread I was having all 3rd party apps crash constantly, and instantly upon launch. The myriad of methods used to recover it to working order failed. I decided to do a Restore and use the last successful backup. It got to about the 95% mark on the restore and hung for 2 hours. The exact same place for 2 hours.
Not having the ability or patience to wait for my iPod to get done tying up my computer, I reset it. Now, all I've got is a $299.99 Paperweight that constantly displays a nice and shiny apple logo on it's screen.
An attempt to restore it to factory settings only gave me an error dialogue box:
The iPod "Kuhnaydeein's iPod" could not be restored.
An unknown error occurred (0xE8000035).
Now what am I supposed to do? I don't live near an Apple Store, the only place that sells apple merch is the store where I work, in the department I work. I know our policy on taking back/exchanging iPods.
What I've failed to mention is how I'm EVER going to sell one of these to someone if there's a chance they'll just be getting the same FAULTY Hardware/Software I'm now stuck with? Is Apple going to come to the rescue, read this post and replace my iPod? I sincerely hope they read this, because they don't give the slightest hint at any Direct Email addresses on the Apple.com website. (What's with that anyway?)
So what do I do now? RESTORING IS NOT AN OPTION.

I lost my upgrade eligibility after activating phone bought 3rd party to replace broken phone to get me by until my upgrade date (2 months after phone broke), is this right?

My Iphone 4 broke 2 months before my upgrade date and I bought another iphone 4 from a friend to get me by until then. I activated it and thought all was gravy until I go to upgrade to an Iphone 5s. It says my upgrade isn't for 2 more years from the activation date of the phone I bought 3rd party. I'm very upset about this and would like to get to the bottom of this. I've tried talking to sales reps both in person and at the store and they acted like deer in headlights about the issue. Should I ask for a copy of my upgrade history? I'm very tempted to end my contract if this cannot be resolved.

How To: Direct Message and Joe L

Getting Employer Discount at 3rd Party Store

Similar Messages

Maybe you are looking for