Help to buield program in Smarter way

Hallow
I have a interface program that I have to send a many(50) different structre but in all stuctre I have 6 fields that is requirement in all stuctre. I heard that I can do a strucre with the requirement fields and one field type char 255 that I move for him all the data from other fields . but i dont now way i thihnk this is smarter way to do that so please help.
Example
Pernr
Persno
i.d
date
Name
vData
Instead of
Pernr
Persno
i.d
date
Name
Date of bearth
Country
Religion
And many more fields..
Regards

hi all
Maybe field symbol can help but i dont now how to use it?
Regards

Similar Messages

Programming multiple smart cards with multiple smart card readers in a PC causes a PCSCException in a smart card that is in progress

Hi,
I develop a Java code using smartcardio API to program a smart card. My GUI allows to add at most 5 smart card readers that will wait for card present, then do authentication and program the smart card with an application, then wait for card removal. This is a separate thread running in a loop for each smart card reader added as programmer.
The problem occurs when a certain smart card is in progress and I inserted another smart card to another smart card reader. Both smart card reader halts and throw sun.security.smartcardio.PCSCException: Unknown error 0x8010002f.
I also observed that every time there is an attempt to insert/remove a smart card in the smart card reader that is connected to the USB port would cause the programming in progress to be interrupted and throw the PCSCException.
These are some exceptions I got during my testing:
sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
at sun.security.smartcardio.PCSC.SCardTransmit(Native Method)
at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:171)
java.lang.Exception: Loader Record Failed: 6E | 0 //Sometimes I got this return code SW1 0x6E SW2 0x00 which means an APDU with an invalid 'CLA' bytes was received. I had check the command before it was sent and it was correct.
Help me understand this issue. I think the CardTerminal.isCardPresent(), CardTerminal.waitForCardPresent(0), and CardTerminal.waitForCardAbsent(0) cause this issue that CardChannel.transmit(apduCommand) is interrupted or the smart card insertion/removal causes the CardChannel.transmit(apduCommand) is interrupted.
Regards,
Knivez

Hi,
when you work with one smartcard reader only usually you address the slot -1 that means "the first found".
But to deal with multiple readers you have to use slots of course since one reader will be slot 0, next reader will be slot 1 and so on...
So a credential object will be identified on a system by a couple
<slot,alias>
After that, the way to address slots (I mean the syntax) depends on the classes you are using...
Bye

Use of NACE after creating print program n smart form

Wat's d purpose of NACE?I hav created my own print program n smart form according to my own requirement.If NACE is necessary 4 my smart from.How can i use NACE i mean navigation steps.
Please help me out.Its urgent.
Thanks & Regards,
Santhosh.

Hi Santhosh,
Nace is for message control settings. Say if u want to trigger a Smartform or an Idoc or any other customized program u can do the message control settings.
Say at the time of Sales Order creation or updation u want to trigger a Smartform, then u have to follow the following steps:
Goto NACE
Select application V1 and then click Output Type.
create a new Output type or copy the existing one abd save it with new name
then in Processing Routine Mention the driver program name and in Form routine mention the main subroutine name.
In Smartform mention your SMartform name and also the layout if u have ceated.
Again go to NACE and Select application V1 and press Procedures.
here out of the many procedures u have to select the right one and attach your Output Type to it.
You can also create a condition record..Say if u want to trigger this Smartforms for Sales Order of particular type.
Hope this helps.
Reward Points if useful.
Thanks.

Smart way to auto update pop-up menu in nav bar?

Smart way to keep updating pop-up menu in Nav bar ?
I created a template in DW 8. It is used to generate many
other pages for the site. only the page content region is editable.
There is a nav bar in the template. Some buttons of the nav bar
display pop-up menu when MouseOver . Those pop-up menu need to be
changed from time to time. What is the best way to automatically
update the pop-up menu in those templated-generated files, using
template (I tried to define the nav bar as editable region,
modified the pop-ups and saved the template. I got a lots of
unexpected problems, DW8 even crashed), using libray items or
something else? I am a relatively new DW developer. Much appreciate
if someone could help.

If the navigation is in a non-editable region of the
template, then changes
to it will propagate automatically to all child pages - are
you not seeing
that happen?
> I tried to define the nav bar as editable region
You wouldn't usually want to do that.
> I got a lots of unexpected problems, DW8 even
> crashed
You must have made other errors. Doing something like this
would surely not
crash DW.
The only problem with having the navigation in the
non-editable region of
the template is that a change to it will touch *every* file
in the site,
each of which must then be uploaded again. To solve this
problem you can
use server-side includes for the navigation. Then you would
make your
change to the include file, upload it, and all pages would
reflect that
change.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"lakeleman" <[email protected]> wrote in
message
news:[email protected]...
>
Smart way to keep updating pop-up menu in Nav bar ?
> I created a template in DW 8. It is used to generate
many other pages
> for
> the site. only the page content region is editable.
There is a nav bar in
> the
> template. Some buttons of the nav bar display pop-up
menu when MouseOver .
> Those pop-up menu need to be changed from time to time.
What is the best
> way to
> automatically update the pop-up menu in those
templated-generated files,
> using
> template (I tried to define the nav bar as editable
region, modified the
> pop-ups and saved the template. I got a lots of
unexpected problems, DW8
> even
> crashed), using libray items or something else? I am a
relatively new DW
> developer. Much appreciate if someone could help.
>

Online Help for Common Programs Will Not Open in Firefox

Many of my programs, such as Ultradefrag and Audacity (to name two), present their Help guides and User Manuals using a browser. I have Firefox set as my default browser. Every time I try to use help with these programs, I get the very frustrating message "Firefox is already running, but ...". I cannot use help without killing firefox and losing all of my browsing sessions. There simply MUST be a way around this. I do not experience this major problem with Internet Explorer. I'm using Firefox 14.0.1 on Windows 7 SP1 64-bit.

Hi,
You can try creating a a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. Once it has been created you can use the '''Default User''' (the current profile) profile for the regular browsing, and choose the newly created dummy profile for external programs that need it.
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
[https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Profile Manager]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files]

Need some help with a program Please.

Well, im new here, im new to java, so i need your help, i have to make a connect four program, my brother "Kind of" helped me and did a program for me, but the problem is i cant use some of those commands in the program and i have to replace them with what ive learned, so i will post the program and i will need your help to modify it for me.
and for these programs, also i want help for:
They have errors and i cant fix'em
the commands that i've leaned:
If statements, for loops, while loops,do while, strings, math classes, swithc statement, else if,logical operators,methods, one and two dimensional arrays.
Thanx in advance,
truegunner
// Fhourstones 3.0 Board Logic
// Copyright 2000-2004 John Tromp
import java.io.*;
class Connect4 {
static long color[]; // black and white bitboard
static final int WIDTH = 7;
static final int HEIGHT = 6;
// bitmask corresponds to board as follows in 7x6 case:
// . . . . . . . TOP
// 5 12 19 26 33 40 47
// 4 11 18 25 32 39 46
// 3 10 17 24 31 38 45
// 2 9 16 23 30 37 44
// 1 8 15 22 29 36 43
// 0 7 14 21 28 35 42 BOTTOM
static final int H1 = HEIGHT+1;
static final int H2 = HEIGHT+2;
static final int SIZE = HEIGHT*WIDTH;
static final int SIZE1 = H1*WIDTH;
static final long ALL1 = (1L<<SIZE1)-1L; // assumes SIZE1 < 63
static final int COL1 = (1<<H1)-1;
static final long BOTTOM = ALL1 / COL1; // has bits i*H1 set
static final long TOP = BOTTOM << HEIGHT;
int moves[],nplies;
byte height[]; // holds bit index of lowest free square
public Connect4()
color = new long[2];
height = new byte[WIDTH];
moves = new int[SIZE];
reset();
void reset()
nplies = 0;
color[0] = color[1] = 0L;
for (int i=0; i<WIDTH; i++)
height[i] = (byte)(H1*i);
public long positioncode()
return 2*color[0] + color[1] + BOTTOM;
// color[0] + color[1] + BOTTOM forms bitmap of heights
// so that positioncode() is a complete board encoding
public String toString()
StringBuffer buf = new StringBuffer();
for (int i=0; i<nplies; i++)
buf.append(1+moves);
buf.append("\n");
for (int w=0; w<WIDTH; w++)
buf.append(" "+(w+1));
buf.append("\n");
for (int h=HEIGHT-1; h>=0; h--) {
for (int w=h; w<SIZE1; w+=H1) {
long mask = 1L<<w;
buf.append((color[0]&mask)!= 0 ? " @" :
(color[1]&mask)!= 0 ? " 0" : " .");
buf.append("\n");
if (haswon(color[0]))
buf.append("@ won\n");
if (haswon(color[1]))
buf.append("O won\n");
return buf.toString();
// return whether columns col has room
final boolean isplayable(int col)
return islegal(color[nplies&1] | (1L << height[col]));
// return whether newboard lacks overflowing column
final boolean islegal(long newboard)
return (newboard & TOP) == 0;
// return whether newboard is legal and includes a win
final boolean islegalhaswon(long newboard)
return islegal(newboard) && haswon(newboard);
// return whether newboard includes a win
final boolean haswon(long newboard)
long y = newboard & (newboard>>HEIGHT);
if ((y & (y >> 2*HEIGHT)) != 0) // check diagonal \
return true;
y = newboard & (newboard>>H1);
if ((y & (y >> 2*H1)) != 0) // check horizontal -
return true;
y = newboard & (newboard>>H2); // check diagonal /
if ((y & (y >> 2*H2)) != 0)
return true;
y = newboard & (newboard>>1); // check vertical |
return (y & (y >> 2)) != 0;
void backmove()
int n;
n = moves[--nplies];
color[nplies&1] ^= 1L<<--height[n];
void makemove(int n)
color[nplies&1] ^= 1L<<height[n]++;
moves[nplies++] = n;
public static void main(String argv[])
Connect4 c4;
String line;
int col=0, i, result;
long nodes, msecs;
c4 = new Connect4();
c4.reset();
BufferedReader dis = new BufferedReader(new InputStreamReader(System.in));
for (;;) {
System.out.println("position " + c4.positioncode() + " after moves " + c4 + "enter move(s):");
try {
line = dis.readLine();
} catch (IOException e) {
System.out.println(e);
System.exit(0);
return;
if (line == null)
break;
for (i=0; i < line.length(); i++) {
col = line.charAt(i) - '1';
if (col >= 0 && col < WIDTH && c4.isplayable(col))
c4.makemove(col);
By the way im using Ready to program for the programming.

You can't really believe that his brother did this
for him...I did miss that copyright line at the beginning when
I first looked it over, but you know, if it had been
his brother, I'd be kinda impressed. This wasn't a
25 line program. It actually would have required
SOME thought. I doubt my brother woulda done that
for me (notwithstanding the fact that I wouldn't need
help for that program, and my brother isn't a
programmer).I originally missed the comments at the top but when I saw the complexity of what was written then I knew that it was too advanced for a beginner and I relooked through the code and saw the comments.

Help with Paint program.

Hello. I am somewhat new to Java and I was recently assigned to do a simple paint program. I have had no trouble up until my class started getting into the graphical functions of Java. I need help with my program. I am supposed to start off with a program that draws lines and changes a minimum of 5 colors. I have the line function done but my color change boxes do not work and I am able to draw inside the box that is supposed to be reserved for color buttons. Here is my code so far:
// Lab13110.java
// The Lab13 program assignment is open ended.
// There is no provided student version for starting, nor are there
// any files with solutions for the different point versions.
// Check the Lab assignment document for additional details.
import java.applet.Applet;
import java.awt.*;
public class Lab13110 extends Applet
 int[] startX,startY,endX,endY;
 int currentStartX,currentStartY,currentEndX,currentEndY;
 int lineCount;
 Rectangle red, green, blue, yellow, black;
 int numColor;
 Image virtualMem;
 Graphics gBuffer;
 int rectheight,rectwidth;
 public void init()
 startX = new int[100];
 startY = new int[100];
 endX = new int[100];
 endY = new int[100];
 lineCount = 0;
 red = new Rectangle(50,100,25,25);
 green = new Rectangle(50,125,25,25);
 blue = new Rectangle(50,150,25,25);
 yellow = new Rectangle(25,112,25,25);
 black = new Rectangle(25,137,25,25);
 numColor = 0;
 virtualMem = createImage(100,600);
 gBuffer = virtualMem.getGraphics();
 gBuffer.drawRect(0,0,100,600);
 public void paint(Graphics g)
 for (int k = 0; k < lineCount; k++)
 g.drawLine(startX[k],startY[k],endX[k],endY[k]);
 g.drawLine(currentStartX,currentStartY,currentEndX,currentEndY);
 g.setColor(Color.red);
 g.fillRect(50,100,25,25);
 g.setColor(Color.green);
 g.fillRect(50,125,25,25);
 g.setColor(Color.blue);
 g.fillRect(50,150,25,25);
 g.setColor(Color.yellow);
 g.fillRect(25,112,25,25);
 g.setColor(Color.black);
 g.fillRect(25,137,25,25);
 switch (numColor)
 case 1:
 g.setColor(Color.red);
 break;
 case 2:
 g.setColor(Color.green);
 break;
 case 3:
 g.setColor(Color.blue);
 break;
 case 4:
 g.setColor(Color.yellow);
 break;
 case 5:
 g.setColor(Color.black);
 break;
 case 6:
 g.setColor(Color.black);
 break;
 g.setColor(Color.black);
 g.drawRect(0,0,100,575);
 public boolean mouseDown(Event e, int x, int y)
 currentStartX = x;
 currentStartY = y;
 if(red.inside(x,y))
 numColor = 1;
 else if(green.inside(x,y))
 numColor = 2;
 else if(blue.inside(x,y))
 numColor = 3;
 else if(yellow.inside(x,y))
 numColor = 4;
 else if(black.inside(x,y))
 numColor = 5;
 else
 numColor = 6;
 repaint();
 return true;
 public boolean mouseDrag(Event e, int x, int y)
 int Rectheight = 500;
 int Rectwidth = 900;
 currentEndX = x;
 currentEndY = y;
 Rectangle window = new Rectangle(0,0,900,500);
 //if (window.inside(Rectheight,Rectwidth))
 repaint();
 return true;
 public boolean mouseUp(Event e, int x, int y)
 int Rectheight = 500;
 int Rectwidth = 900;
 startX[lineCount] = currentStartX;
 startY[lineCount] = currentStartY;
 endX[lineCount] = x;
 endY[lineCount] = y;
 lineCount++;
 Rectangle window = new Rectangle(0,0,900,500);
 if (window.inside(Rectheight,Rectwidth))
 repaint();
 return true;
 public void Rectangle(Graphics g, int x, int y)
 g.setColor(Color.white);
 Rectangle screen = new Rectangle(100,0,900,600);
}If anyone could point me in the right direction of how to go about getting my buttons to work and fixing the button box, I would be greatly appreciative. I just need to get a little bit of advice and I think I should be good after I get this going.
Thanks.

This isn't in any way a complete solution, but I'm posting code for a mouse drag outliner. This may be preferable to how you are doing rectangles right now
you are welcome to use and modify this code but please do not change the package and make sure that you tell your teacher where you got it from
MouseDragOutliner.java
package tjacobs.ui;
import java.awt.BasicStroke;
import java.awt.Color;
import java.awt.Component;
import java.awt.Container;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.Point;
import java.awt.Stroke;
import java.awt.event.*;
import java.util.ArrayList;
import java.util.Iterator;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
* See the public static method addAMouseDragOutliner
public class MouseDragOutliner extends MouseAdapter implements MouseMotionListener {
 public static final BasicStroke DASH_STROKE = new BasicStroke(1.0f, BasicStroke.CAP_SQUARE, BasicStroke.JOIN_BEVEL, 10.0f, new float[] {8, 8}, 0);
 private boolean mUseMove = false;
 private Point mStart;
 private Point mEnd;
 private Component mComponent;
 private MyRunnable mRunner= new MyRunnable();
 private ArrayList mListeners = new ArrayList(1);
 public MouseDragOutliner() {
 super();
 public MouseDragOutliner(boolean useMove) {
 this();
 mUseMove = useMove;
 public void mouseDragged(MouseEvent me) {
 doMouseDragged(me);
 public void mousePressed(MouseEvent me) {
 mStart = me.getPoint();
 public void mouseEntered(MouseEvent me) {
 mStart = me.getPoint();
 public void mouseReleased(MouseEvent me) {
 Iterator i = mListeners.iterator();
 Point end = me.getPoint();
 while (i.hasNext()) {
 ((OutlineListener)i.next()).mouseDragEnded(mStart, end);
 //mStart = null;
 public void mouseMoved(MouseEvent me) {
 if (mUseMove) {
 doMouseDragged(me);
 public void addOutlineListener(OutlineListener ol) {
 mListeners.add(ol);
 public void removeOutlineListener(OutlineListener ol) {
 mListeners.remove(ol);
 private class MyRunnable implements Runnable {
 public void run() {
 Graphics g = mComponent.getGraphics();
 if (g == null) {
 return;
 Graphics2D g2 = (Graphics2D) g;
 Stroke s = g2.getStroke();
 g2.setStroke(DASH_STROKE);
 int x = Math.min(mStart.x, mEnd.x);
 int y = Math.min(mStart.y, mEnd.y);
 int w = Math.abs(mEnd.x - mStart.x);
 int h = Math.abs(mEnd.y - mStart.y);
 g2.setXORMode(Color.WHITE);
 g2.drawRect(x, y, w, h);
 g2.setStroke(s);
 public void doMouseDragged(MouseEvent me) {
 mEnd = me.getPoint();
 if (mStart != null) {
 mComponent = me.getComponent();
 mComponent.repaint();
 SwingUtilities.invokeLater(mRunner);
 public static MouseDragOutliner addAMouseDragOutliner(Component c) {
 MouseDragOutliner mdo = new MouseDragOutliner();
 c.addMouseListener(mdo);
 c.addMouseMotionListener(mdo);
 return mdo;
 public static interface OutlineListener {
 public void mouseDragEnded(Point start, Point finish);
 public static void main(String[] args) {
 JFrame f = new JFrame("MouseDragOutliner Test");
 Container c = f.getContentPane();
 JPanel p = new JPanel();
 //p.setBackground(Color.BLACK);
 c.add(p);
 addAMouseDragOutliner(p);
 f.setBounds(200, 200, 400, 400);
 f.addWindowListener(new WindowClosingActions.Exit());
 f.setVisible(true);
}

Search help in dialog program

Hi all,
Fora search help in dialog program.
I HAVE TO GET SEARCH FOR A FIELD ZID ON APARTICULAR SCREEN BASED ON DATA, MODIFIED BY AND A PLANT..
I HAVE A RECORD IN ONE MY ZTABLE.
I HAVE TO GET THAT BY SEVERAL SEARCH PARAMETERS SAY BY DATE , MODIFIED BY,PLANT ETC.
each user has been assigned a plant , so in search he has to get records belonging to that plant.
so i cannot include plant in my search help, because user may type in other plant.
so i tried two ways
1) i created a search help in se11 including the plant field again the problem arises if the user types a different plant.
so i want to know whether we can apassa value to plant field in search help(i.e the plant assigned to the user),
i have this kind of thing in some standard t -code i.e especially for searching material , the plant field in search help was filled by one plant.
this should be one of the solution
2)I tried to write a code in pov of program code.
this is how my code looks.
DATA : BEGIN OF ITAB OCCURS 0.
 INCLUDE STRUCTURE ZXXX.
DATA : END OF ITAB.
ITAB HAS FIELDS ID, DATE , MODIFIEDBY , PLANT.
USER_PLANT = 'ABC'.
SELECT * FROM ZXXX INTO TABLE ITAB WHERE PLANT = USER_PLANT.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
 RETFIELD = 'ZID'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
 WINDOW_TITLE = 'TEST'
VALUE = ' '
 VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
TABLES
 VALUE_TAB = ITAB
FIELD_TAB =
 RETURN_TAB = IT_RETURN4
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
if sy-subrc = 0.
 clear itab.
 read table it_return4 index 1.
 ZXXX-ZID = it_return4-fieldval.
endif.
THIS WORKS FINE , BUT HE CANNOT SEARCH BASED ON DATE AND MODIFIEDBY
ALL i want is is get a pop up window and should be able to search based on data and modifiedby for a predifined plant.
I hope iam clear.
Thanks

Hi,
Create a FM with the following code..The interface is defined in the code..
In the Function module top include add the following code.
TYPE-POOLS: shlp, vrm.
IN this code I am deleting the records that are not of the currency USD...
Do the same thing for your requirement...
FUNCTION Y_SEARCH_HELP_EXIT.
""Local interface:
*" TABLES
*" SHLP_TAB TYPE SHLP_DESCR_TAB_T
*" RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*" REFERENCE(SHLP) TYPE SHLP_DESCR_T
*" REFERENCE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
where z_test is my z table..
DATA: ITAB LIKE Z_TEST OCCURS 0 WITH HEADER LINE.
ITAB[] = RECORD_TAB[].
IF NOT RECORD_TAB[] IS INITIAL.
DELETE ITAB WHERE WAERS <> 'USD'.
RECORD_TAB[] = ITAB[].
ENDIF.
ENDFUNCTION.
Thanks,
Naren

How to add the search help in Screen programming "F4" help

i add the input field
se51 --> layout and now want to add the search help with these field,
please help me... in this way.

Looks like u r a novice in Mp programming.
Please look at some demo programs in SAP which can teach u the basics of Module Pool programming . Use Demo* in se38 and search first in sap and then in some other sites.
The above thing can be done in Process on value request .
Br, vijay.

BC4J smarter way to: select sysdate from dual ????

Our architecture uses the DB server's date/time as the application's single
place to get date / time. So our UI's / business logic needs sysdate in several
places through screen flow and VO/Entities called by the business logic.
I'll create a SQLView at design time to package calling select sysdate from dual.
We're currently using Dynamic unnamed Views which are more expensive than just
getting sysdate deserves and also are a memory leak if you don't
call vo.remove() after you're done with the result set.
But is there a simplier or smarter way to get sysdate from the DB than the more
heavy weight than seems necessary step of instantiating a VO and creating a
result set to get the String sysdate???
Thanks,
curt

I cache viewObjects in the MT using some ViewObjectManager and had no
problems till now (more then 6 months of production). Any AM that
serve dynamic requests should have own ViewObjectManager-object.
import oracle.jbo.*;
import java.util.Hashtable;
import java.util.Enumeration;
public class ViewObjectManager {
private ApplicationModule _appMod;
private Hashtable _viewObjectNames;
public ViewObjectManager(ApplicationModule am) {
_appMod = am;
_viewObjectNames = new Hashtable();
public ViewObject getViewObject( String selectClause_,
String fromClause_,
String whereClause_ ) {
ViewObject vo_ = null;
String sqlStmt_ = _getSQLStmtFromClauses
( selectClause_, fromClause_, whereClause_ );
String key_ = sqlStmt_;
String voName_ = (String)_viewObjectNames.get(key_);
boolean isNew_ = ( voName_ == null );
if ( !isNew_ ) {
vo_ = appMod.findViewObject(voName);
if ( vo_ == null ) {
viewObjectNames.remove(key);
isNew_ = true;
if ( isNew_ ) {
vo_ = appMod.createViewObjectFromQueryStmt( null, sqlStmt );
viewObjectNames.put( key, vo_.getName() );
return vo_;
private String getSQLStmtFromClauses( String selectClause,
String fromClause_,
String whereClause_ ) {
return
"SELECT "+selectClause_
+" FROM "+fromClause_
+( whereClause_ == null || whereClause_.equals("")
? "" : " WHERE "+whereClause_ ) ;
Client method in this case looks like that:
public static synchronized BigDecimal getNewId
( RequestOnNewId request__,
QueryableApplicationModule am__ ) {
String viewObjectName_ = request__.viewObjectName,
sequenceName_ = request__.sequenceName,
fromClause_ = request__.fromClause;
BigDecimal new_id_ = null;
ViewObject vo_;
Row row_;
Object obj_;
vo_ = am__.getViewObjectManager()
.getViewObject( sequenceName_+".NEXTVAL AS \"NEWID\"",
"DUAL",
null );
vo_.executeQuery();
row_ = vo_.first();
obj_ = row_.getAttribute("NEWID");
new_id_ = (obj_ == null) ? null : ((Number)obj_).bigDecimalValue();
return new_id_;
Hope this helps.
Arkadi Ganov
[email protected]

Hi, plz can any one help me that is there any way to locate or find the stolen ipon nano???

hi, plz can any one help me that is there any way to locate or find the stolen ipon nano???

Other than physically looking for it, no. It does not have WiFi.

I accidentally set up my new ipad in itunes under the name of my existing ipad and need to set it up as a new device. Help. I cannot find a way to start fresh.

I accidentally set up my new ipad in itunes under the name of my existing ipad and need to set it up as a new device. Help. I cannot find a way to start fresh.

That's probably not a good idea to try to share apps since you will have to switch ID's each time you update apps and sync apps from iTunes.
And technically - according to Apple's terms - you cannot share apps using different ID's. You can actually lock yourself out of an ID for 90 days if you switch ID's and if you associate the iPad with another ID.
The bold type is a copy and paste from the site that I referenced below.
When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. This article describes how to manage these associations.
http://support.apple.com/kb/ht4627

How to use the created search helps in the program?

Hi Everyone,
I know how to create Search help elementary / collective search help through SE 11. I have a question, how can I make use of the created search help in the program.
How to use the Search help in the programs, which is created through SE11
Subbu.

Hi,
In case if you want to use in parameters statement, then we can use the suffix MATCHCODE OBJECT syntax.
Eg.
report abc.
parameters : a(10) type c matchcode object ZBELNR.
Hope this helps.
regards,
amit m.

Need help writing host program using LabView.

Need help writing host program using LabView.
Hello,
I'm designing a HID device, and I want to write a host program using National Instrument's LabView. NI doesn't have any software support for USB, so I'm trying to write a few C dll files and link them to Call Library Functions. NI has some documentation on how to do this, but it's not exactly easy reading.
I've written a few C console programs (running Win 2K) using the PC host software example for a HID device from John Hyde's book "USB by design", and they run ok. From Hyde's example program, I've written a few functions that use a few API functions each. This makes the main program more streamlined. The functions are; GetHIDPath, OpenHID, GetHIDInfo, Writ
eHID, ReadHIC, and CloseHID. As I mentioned, my main program runs well with these functions.
My strategy is to make dll files from these functions and load them into LabView Call Library Functions. However, I'm having a number of subtle problems in trying to do this. The big problem I'm having now are build errors when I try to build to a dll.
I'm writing this post for a few reasons. First, I'm wondering if there are any LabView programmers who have already written USB HID host programs, and if they could give me some advice. Or, I would be grateful if a LabView or Visual C programmer could help me work out the programming problems that I'm having with my current program. If I get this LabView program working I would be happy to share it. I'm also wondering if there might already be any USB IHD LabView that I could download.
Any help would be appreciated.
Regards, George
George Dorian
Sutter Instruments
51 Digital DR.
Novato, CA 94949
USA
[email protected]
m
(415) 883-0128
FAX (415) 883-0572

George may not answer you. He hasn't been online here for almost eight years.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Help with a Program I am writing! Please!

Hello All,
This is my first post...I hope to find some answers to my program I am writing! A couple things first - I am 17, and have designed a comp. science class for myself to take while a senior in high school, since there was not one offered. My end of the 2nd term project is to write a program that encompasses the information I have learned about for the past two terms. I know the very basics, if that. Please help!
My program involves the simple dice throwing program, 'Dice Thrower' by Kevin Boone. The full text/program write out can be found at:
http://www.kevinboone.com/PF_DiceThrower-java.html
I am hoping to add a part to this program that basically tells the program if the dice show doubles, pop up a little GUI window that says "You are a Winner! You Got Doubles!"
I was thinking as I finished chapter 7 in my text book, that either an 'if/else' or 'switch' statement might be the right place to start.
Could someone please write me a start to the program text that I need to add to 'Dice Thrower', or explain what I need to do to get started! Thank you so much, I really appreciate it.
Erick DeVore - Eroved Kcire

import java.applet.Applet;
import java.awt.*;
import java.awt.event.*;
import javax.swing.JLabel;
import javax.swing.JFrame;
import java.awt.FlowLayout;
import java.awt.Color;
public class DiceThrower extends Applet
Die die1;
Die die2;
public void paint (Graphics g)
 die1.draw(g);
 die2.draw(g);
 g.drawString ("Click mouse anywhere", 55, 140);
 g.drawString ("to throw dice again", 65, 160);
public void init()
 die1 = new Die();
 die2 = new Die();
 die1.setTopLeftPosition(20, 20);
 die2.setTopLeftPosition(150, 20);
 throwBothDice();
 // Erick's Program Insert below
 public class WinnerGui extends JFrame;
public WinnerGui();
 super ("You Are The Winner with GUI");
 Container c = getContentPane();
 c.setBackground(Color.lightGray);
 c.setLayout(new FlowLayout());
 c.add(new JLabel("You're a Winner! You Got Doubles!"));
 //End Erick's Program insert
 DiceThrowerMouseListener diceThrowerMouseListener =
 new DiceThrowerMouseListener();
 diceThrowerMouseListener.setDiceThrower(this);
 addMouseListener(diceThrowerMouseListener);
public void throwBothDice();
 die1.throwDie();
 die2.throwDie();
 repaint();
class Die
int topLeftX;
int topLeftY;
int numberShowing = 6;
final int spotPositionsX[] = {0, 60, 0, 30, 60, 0, 60};
final int spotPositionsY[] = {0, 0, 30, 30, 30, 60, 60};
public void setTopLeftPosition(final int _topLeftX, final int _topLeftY)
 topLeftX = _topLeftX;
 topLeftY = _topLeftY;
public void throwDie()
 numberShowing = (int)(Math.random() * 6 + 1);
public void draw(Graphics g)
 switch(numberShowing)
 case 1:
 drawSpot(g, 3);
 break;
 case 2:
 drawSpot(g, 0);
 drawSpot(g, 6);
 break;
 case 3:
 drawSpot(g, 0);
 drawSpot(g, 3);
 drawSpot(g, 6);
 break;
 case 4:
 drawSpot(g, 0);
 drawSpot(g, 1);
 drawSpot(g, 5);
 drawSpot(g, 6);
 break;
 case 5:
 drawSpot(g, 0);
 drawSpot(g, 1);
 drawSpot(g, 3);
 drawSpot(g, 5);
 drawSpot(g, 6);
 break;
 case 6:
 drawSpot(g, 0);
 drawSpot(g, 1);
 drawSpot(g, 2);
 drawSpot(g, 4);
 drawSpot(g, 5);
 drawSpot(g, 6);
 break;
void drawSpot(Graphics g, final int spotNumber)
 g.fillOval(topLeftX + spotPositionsX[spotNumber],
 topLeftY + spotPositionsY[spotNumber], 20, 20);
class DiceThrowerMouseListener extends MouseAdapter
DiceThrower diceThrower;
public void mouseClicked (MouseEvent e)
 diceThrower.throwBothDice();
public void setDiceThrower(DiceThrower _diceThrower)
 diceThrower = _diceThrower;
}That was what I have dwindled it down to, using my knowledge, as well as others' expertise...however I am listening to what you say, and get these messages when I try to compile in the CMD:
line 63 - illegal start of expression (carrot at p in public)
line 63 - ; expected (carrot at c in class)
line 63 - { expected (carrot at ; at end of line)
line 65 - illegal start of expression (carrot at p in public)
line 83 - <identifier> expected (carrot as: (this) ) -- I don't even know what that means ^
line 84 - invalid method declaration; return type required (carrot at a in add)
line 84 - <identifier> expected (carrot like this: [see below])
addMouseListener(diceThrowerMouseListener);
^
line 84 - ) expected (carrot is one place over from previous spot [see above]
line 93 - illegal start of expression (carrot at p in public)
I know this seems like a lot of errors, but believe it or not, I actually had it up in the high teens and was able to fix some of them myself from going by previous examples, as well as looking things up in my text book. If anyone has any suggestions concerning the syntax errors of the code, please please let me know and I will work my hardest to fix them...thank you all so much for helping.
Erick

Help to buield program in Smarter way

Similar Messages

Maybe you are looking for