How to avoid the user accounts to appear in the disk boot while installing Yosemite?

Hi, there is an issue when I encrypt the disk in Yosemite, when I make a clean installation, I first format partition with encryption, install system and restart computer, in the first boot the system ask only for disk password then continue creating user account, when I finish the configuration and restart the computer, the first boot screen ask me for disk password or user password, this is wrong, I want that the system ask me first the disk password and then the users accounts passwords to start the session as it was in Mavericks, so I try different ways to do this.
1. In clean Installation is not working, every time that create a user it appears in the first boot screen, in which the system must ask only for disk password.
2. In upgrade Installation with a computer already encrypted, it appears to works properly but if you create a new user it appears in the first boot screen.
3. I test this by doing a clean installation without encryption, create a user and make an image of this partition, then I copy the dwg image to an external disk, then start computer with an USB with Yosemite, using disk utility I erase the partition and format it with encryption, then restore the dwg image in this partition, it looks that works properly, but if I create a New User then the new user appears in the first boot screen when only must ask for disk password.
Can someone help me with this issue please?
If there is someone of Mac can you tell me if this is going to be corrected in this version? or we must wait for the next OS X version.
Thank You.

Similar Messages

When i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

when i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?

Ok, it's just a glitch that it's not auto-rebooting from the disk.
Please backup your personal files off the machine to a regualr external drive and disconnect all drives before doing anything
Take the 10.6 disk out and clean and polish the bottom with a very soft clean cloth and a tiny bit of rubbing alcohol to cut the oils.
Stick the disk in and reboot holding c key down, this will make it boot from the disk and you can install Snow Leopard that way.

How to create a user account by mirroring another account in PowerShell (Trying to learn to use Powshell for some daily AD tasks intead of the GUI)

Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.

Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1

How to avoid long user interface response time in long measurements ?

Hi
I tried to find more information regarding techniques how to avoid long user interface response times in case of extremely long measurement times with an external instrument communicating over GPIB, so I post this hoping to get some hint or a link to a guideline. I guess this is quite normal problem.
Problem is that when I want to measure long time in order to get an average result from the instrument, I have to wait until the result is returned from the instrument. Obviously that makes the user interface response very slow in traditional technique.
My restriction is the old GPIB 488 instrument driver that I would not want to modify, but I have source code to it.
What would be the best way to improve the response time for user interface ? I have looked into the few things:
* multithreading
* callback in main program for GPIB events
* modifying instrument driver e.g. to support VISA and creating a VISA callback
regards,
Petri

Several ways to do this:
If you're getting several measurements, you could have the instrument generate an asynchronous interrupt (an "SRQ" in GPIB terms), then collect the data in response to the SRQ callback. While you're waiting for the SRQ's, you can have your main thread running the interface so responsive GUI. You don't have to spinlock on the GPIB read waiting for instrument data.
Or, as you mentioned, you could spawn a thread to manage the measurements, and use a timer in the main thread to periodically allow you to check the status of the measurement thread. Again, the main thread mostly just runs the user interface.
Either way, the idea is to keep the main thread freed up most of the time to run the GUI, and have it periodically check for completion of your measurement sequence. While you're waiting in the main thread, you may want to make sure the user can't inadvertently re-trigger another measurement sequence until the active one is complete.
If you do find yourself doing a dead wait, you'd want to break this up into a series of shorter waits, and in between each wait, do a ProcessSystemEvents from the main thread to keep the GUI active.
Menchar

Help , how to auto create user account

Hi, guys,
i wanna to know how to auto create user account after use the suppliers' api to create supplier.
i didn't find out how to auto create user account by use ap_vendor_pub_pkg.create_vendor_contact procedure.
how to auto create the user account ?
if you know ,tell me ,pls
best Regards !
Edited by: wanjin on 2013-4-15 下午11:50

Hi Gareth，
I wanna create an Oracle E-business Suite use account ,but how to use fnd_user_pkg.createuser procedure to relation the AP suppliers , not employee suppliers.
the result like N:Purchasing Super User -->supplier-->Contact Directory --> create user
then use "Create User Account for this Contact" to create user account
Regards,
Wanjin

File permissions - how to edit a user account

file permissions - how to edit a user account that is creating files with permissions that are not wanted anymore.
i understand how to reset permissions on files or folders, but i do not understand how to reset the permissions a user is "creating".
ie, each time this user creates a file, the file needs to be manually edited for its permissions. so i need to edit the user's settings, but i can't find where to do that.
this is a home office setup. we have two users with admin privileges. our imac is acting as a server of sorts - it holds common files that need to be edited by both users. the other user is typically working on shared files from a macbook over wifi.
osx 10.6.8
any help is greatly appreciated - thanks up front!
adam

Király wrote:
Changing the umask does not produce reliable results. Many apps, including Apple's own Finder, will override any custom umask setting and apply the OS X standard set of read and write for the creator, and read only for group and others. This is true even in Snow Leopard
I cannot argue with you, because I've never tried or tested it myself. However, this KB article
<http://support.apple.com/kb/HT2202>
states the opposite:
"In Mac OS X v10.5.3 and later, you can create the file /etc/launchd-user.conf with the contents "umask nnn". […]
This will set the user's umask for all applications they launch, such as Finder, TextEdit, or Final Cut Pro, and control the permissions set on new files created by any of these applications."

How to avoid the duplicate values, I do not want the duplicate............

i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............

Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
         substr(rcstcnatcnatcnatcnawther,3,2) c,
         substr(rcstcnatcnatcnatcnawther,5,1) s,
         substr(rcstcnatcnatcnatcnawther,6,3) tc,
         substr(rcstcnatcnatcnatcnawther,9,3) na,
         substr(rcstcnatcnatcnatcnawther,12,3) tc2,
         substr(rcstcnatcnatcnatcnawther,15,3) na2,
         substr(rcstcnatcnatcnatcnawther,18,3) tc3,
         substr(rcstcnatcnatcnatcnawther,21,3) na3,
         substr(rcstcnatcnatcnatcnawther,24,3) tc4,
         substr(rcstcnatcnatcnatcnawther,27,3) na4,
         substr(rcstcnatcnatcnatcnawther,30,10) wther,
         sno
    from scott.sms1 a
   where sno = (select max(sno)
                  from sms1
                 where sno != a.sno
               ); ---------------> added where clause with table alias.
end;Regards
Etbin

How can avoid the problem of Parameter Prompting when I submitting ?

I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
   1. using System;
   2. using System.Collections;
   3. using System.Configuration;
   4. using System.Data;
   5. using System.Linq;
   6. using System.Web;
   7. using System.Web.Security;
   8. using System.Web.UI;
   9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22.     CrystalReportViewer crViewer = new CrystalReportViewer();
23.     //CrystalReportSource crsource = new CrystalReportSource();
24.     int nItemId;
25.
26.     protected void Page_Load(object sender, EventArgs e)
27.     {
28.         //Database Connection
29.         ConnectionInfo ConnInfo = new ConnectionInfo();
30.         {
31.             ConnInfo.ServerName = "127.0.0.1";
32.             ConnInfo.DatabaseName = "Xcodf";
33.             ConnInfo.UserID = "HR777";
34.             ConnInfo.Password = "zghshshs";
35.         }
36.         // For Each Logon parameters
37.         foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38.         {
39.             cnInfo.ConnectionInfo = ConnInfo;
40.
41.         }
42.
43.
44.
45.
46.
47.
48.         //Declaring varibles
49.          nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50.         //string strStartDate = Request.QueryString.Get("StartDate");
51.         //int nItemId = 20;
52.         string strStartDate = "23-JUL-2010";
53.
54.         // object declration
55.         CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56.         CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59.         TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61.         // new report document object
62.         ReportDocument oRpt = new ReportDocument();
63.
64.         // loading the ItemReport in report document
65.         oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67.         // getting the database, the table and the LogOnInfo object which holds login onformation
68.         crDatabase = oRpt.Database;
69.
70.         // getting the table in an object array of one item
71.         object[] arrTables = new object[1];
72.         crDatabase.Tables.CopyTo(arrTables, 0);
73.
74.         // assigning the first item of array to crTable by downcasting the object to Table
75.         crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77.         dbConn = crTable.LogOnInfo;
78.
79.         // setting values
80.         dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81.         dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82.         dbConn.ConnectionInfo.UserID = "HR777";
83.         dbConn.ConnectionInfo.Password = "zghshshs";
84.
85.         // applying login info to the table object
86.         crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93.         crViewer.RefreshReport();
94.
95.                 // defining report source
96.         crViewer.ReportSource = oRpt;
97.         //CrystalReportSource1.Report = oRpt;
98.
99.         // so uptill now we have created everything
100.         // what remains is to pass parameters to our report, so it
101.         // shows only selected records. so calling a method to set
102.         // those parameters.
103.      setReportParameters();
104.     }
105.
106.     private void setReportParameters()
107.     {
108.
109.         // all the parameter fields will be added to this collection
110.         ParameterFields paramFields = new ParameterFields();
111.          //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112.        //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114.         // the parameter fields to be sent to the report
115.         ParameterField pfItemId = new ParameterField();
116.         //ParameterField pfStartDate = new ParameterField();
117.         //ParameterField pfEndDate = new ParameterField();
118.
119.         // setting the name of parameter fields with wich they will be recieved in report
120.
121.         pfItemId.ParameterFieldName = "RegionID";
122.
123.         //pfStartDate.ParameterFieldName = "StartDate";
124.         //pfEndDate.ParameterFieldName = "EndDate";
125.
126.         // the above declared parameter fields accept values as discrete objects
127.         // so declaring discrete objects
128.         ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129.         //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130.         //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132.         // setting the values of discrete objects
133.
134.
135.           dcItemId.Value = nItemId;
136.
137.         //dcStartDate.Value = DateTime.Parse(strStartDate);
138.         //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140.         // now adding these discrete values to parameters
141.           //paramField.HasCurrentValue = true;
142.
143.
144.
145.           //pfItemId.CurrentValues.Clear();
146.          int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147.           pfItemId.Name = valueIDD.ToString();
148.
149.         pfItemId.CurrentValues.Add(dcItemId);
150.         //ParaLocation.ApplyCurrentValues;
151.         pfItemId.HasCurrentValue = true;
152.
153.         //pfStartDate.CurrentValues.Add(dcStartDate);
154.         //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156.         // now adding all these parameter fields to the parameter collection
157.         paramFields.Add(pfItemId);
158.
159.         //paramFields.Add(pfStartDate);
160.         //paramFields.Add(pfEndDate);
161.         /////////////////////
162.         //Formula from Crystal
163.        //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164.         crViewer.RefreshReport();
165.         // finally add the parameter collection to the crystal report viewer
166.         crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170.     }
171. }

Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

How to avoid the event has been repeated many times in the background

Application, the main screen is divided into two containers:left and right container,
The right side of the container is divided into two containers:top and bottom container,
There is a button in the left container.
Click the button, the container at lower right will using ModuleManager load Module, The following container load of the right of the screen has been monitoring the container above the action.
Problem:
When you click the button repeatedly to load the container in the lower right, it will create multiple instances, and can not be freed immediately. When the above container do an action or event, there are multiple instances of monitoring exist.
The background will be repeat the action or event many times.
How to avoid the event has been repeated many times in the background?
Thanks

Flex harUI
multiple instances of a mxml, maybe ?

How to avoid the long time consuming process of settlement on periodic basi

For investment Project(purpose of capitalisation) related expenses We would like to show it Directly in Balance Sheet rather than P/L A/C.Whether it is feasible or not?as per one of consultant it will be first hit the p/L and after settlement it will only be shown in B/Sheet.So how to avoid the long time consuming process of settlement on periodic basis.

Hi, could you write down an example? And what you mean by investment project-is this an WBS?

How to avoid the pdf file in browser cache

i am opening pdf files through browser. After that same pdf changed their contents . after i open the pdf but it will not updated. Bcoz this file in cache . so how to avoid the cache store for pdf files.
plz help me!!!

the code is as bellow
File fBlob = new File ("test.pdf");
FileInputStream fIS = new FileInputStream(fBlob);
pstUpdate= con.prepareStatement("UPDATE table set file = ? where id = ?");
pstUpdate.setBinaryStream(1, fIS, (int) fBlob.length());
pstUpdate.setString(2, rs.getString("id"));
pstUpdate.execute();
con.commit();

How to avoid the screen of selection output device

Hi all,
Who can tell me how to avoid the screen selection output device when running a smartform.
Best regard.

Hi,
      data: wa_SSFCTRLOP type SSFCTRLOP.
       wa_SSFCTRLOP-DEVICE = 'PRINTER'.
       wa_SSFCTRLOP-NO_DIALOG = 'X'.
       wa_SSFCTRLOP-PREVIEW = 'X'.
    in the function module
   call function '....
   exporting
   CONTROL_PARAMETERS = wa_ssfctrlop
regards,
Santosh Thorat

How to avoid the transport request popup when changing real-time load behav

Hello experts,
I'm often switching between the two loading mode, and I already worked in systems where I don't have the popup for transport request : (so I guess there is a possible tuning anywhere)
How to avoid the "asking for a transport request" popup in BW when changing real-time load behaviour of an infocube
Thanks in advance, I will save precious time
Guillaume P.

Hello Krishnan,
i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
Do you know the particular object type to manage ?
Hello Vishnu,
same thing, whatever the option is (switch on / off standard) I have the transport popup.
Anyway thanks for your try.

How to avoid the Blank elemts in the List Item

Dear All,
I am using a List Item
List Elements List Item Value
Yes 1
No 2
Only two elements in this List Item.But at Run time there is one Blank element.
I need to display only two elements from the List Item .How to avoid the Blank.
Thanks and Regards,
Fazil

Fazil,
I am using a List ItemList Elements List Item Value
Yes 1
No 2
Only two elements in this List Item.But at Run time there is one Blank element.
I need to display only two elements from the List Item .How to avoid the Blank.>
Maybe you actually have null entries in your list. You can clean it up using keys as discussed here http://paranoid-engineering.blogspot.in/2008/05/wonderland-of-oracle-forms-builder.html (Ignore the personal opinions of the author if you will ;) ).
Cheers,

How to avoid the Amount and Date values for VOID Cheques

Hi All,
I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
Can any one tel me how to avoid the Amount and Date values for VOID Cheques
Your help will be greatly appreciated.
Regards
Yathish

Hi,
I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
Regards
Subramanian

How to avoid the user accounts to appear in the disk boot while installing Yosemite?

Similar Messages

Maybe you are looking for