How to create an outbound delivery for an repair order (RA)

Hi Guys,
Please let me knoe the steps to outbound delivery. Now, i have created repair order and inbound delivery, request you to explain on further stps.
Thanks in advance.
Shankar

Hi,
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/0d/fa0a415e37d349e10000000a1550b0/frameset.htm
Regards,
Gayathri

Similar Messages

  • How to create one inbound delivery for multiple purchase order?

    Hi Experts,
    Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)? 
    Is there a configuration needed for this?  If yes, please let me know the configuration to make this happen.
    Appreciate your help on this.  Right answers will be rewarded.
    Thank you.
    with regards,
    Muthu Ganapathy.

    Hi,
    my situation is:
    - a WM managed warehouse, society A;
    - a HU managed warehouse (without WM), society B;
    - a purchasing process of HU from society A towards society B.
    Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
    This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
    "V51VP - item was not found - process cancelled".
    Can you help me to transfer these HU?

  • How to create a single delivery for two sales orders?

    Hi Experts,
    I need to create one delivery for two sales orders. But it fails.
    The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
    Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
    I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
    It not happened because of incoterms.? different dates
    Kindly help regarding this.
    Thanks
    Raghu

    Prerequisite for Grouped delivery
    1. Header data should be same like Inco terms,Payment terms
    Go to VL10A
    Enter the sales order Numbers and execute
    Select the sales order Nos  for the group delivery and select "Background"  Tab in Tool Menu Bar
    If delivery is created coloured line items will get generated
    Check the log for delivery docuements
    Check and confirm
    Senthils

  • Help! how to create an outbound delivery from a project using a FM/BAPI?

    Hi,
    I need help to find a BAPI or FM which can be used to create an outbound delivery from a project similar to tcode CNS0?
    The following data will be used in creating the outbound delivery from a project:
      Project definition
      WBS Element
      Network
      Shipping Point
      Ship_To_Party
      Plant
      Storage Location
      Planned Goods Movement Date
      Delivery Type  : LP
      Sales Organization
      Distribution Channel
      Division
      Item Number
    Please help me find the appropriate BAPI or FM to create the delivery from project.
    Any help on this would be greatly appreciated.
    Thank you.
    with regards,
    Muthu Ganapathy.

    Hi Ferry Lianto,
    Thank you for your response.  Do you have a sample code to call this FM? Or can you please provide me what all parameters I need to pass to create delivery from project?    My input parameters are as given below:
    Project definition
    WBS Element
    Network
    Shipping Point
    Ship_To_Party
    Plant
    Storage Location
    Planned Goods Movement Date
    Delivery Type : LP
    Sales Organization
    Distribution Channel
    Division
    Item Number
    Please help me on this.
    Thank you.
    with regards,
    Muthu Ganapathy.

  • Issue During Outbound Delivery for STO Purchase order

    Hi,
    Delivery Quantity is not picking automatically in VL10B, while creating outbound delivery with STO purchase order with account assignment ''Q'' Project (with WBS element). Stock also available in the supplying plant as shown the below screen shot.
    MMBE:
    Please do the needful.
    Thanks,
    Ashok

    Hi Pardhu,
    Thanks for your response.
    We don't have any open reservations and safety stock available for the material. Kindly go through below screen shot for your reference:
    Thanks,
    Ashok

  • How to create Extra Freight Unit for LCL Forwarding Order in Web Version of SAP?

    Hi,
    Can anyone please tell me how to create Extra Freight Unit in LCL Forwarding Order. Normally, each LCL Forwarding Order has one Freight Unit. But, if there are two types of Dangerous Goods and need to be transported via separate containers. Obviously, it should have separate Freight Unit to be created in the system. But, even adding package in Items Tab, unable to create Freight Unit for LCL order. Is there any other way to create Extra Freght Unit?

    Hi Aaron,
    When the FWO saving, it would build the freight unit auotmatically.
    The filed "Document Type" in FUBR is used to specify the FU type.
    So the FWO build the FU base on the FUBR which maintain in the FWO type.
    Useful link for FUBR :
    http://help.sap.com/saphelp_tm80/helpdata/en/5a/6749c4614f46e2a12160c775ff19de/frameset.htm
    Best Regards
    Clark Huang

  • Function Module to create AFS Outbound delivery for sales order

    Guys,
    I am looking for a function module to create deliveries for a sales order IN IS-AFS.
    I cannot make BAPI_DELIVERYPROCESSING_EXEC work. Also, if I use the IDOC type /AFS/DELVRY03 via message type WHSCON and function module IDOC_INPUT_DELVRY it doesn' work either.
    Does anyone know which function module I could use? I need to select specific AFS schedule lines though, but at this point I am not able to make any work.
    Thanks
    Leonardo

    This will not help .
    Edited by: Amit Khare on Aug 7, 2008 3:49 AM

  • Two  outbound Delivery for one sales order

    Hi Experts
    I am an Abaper and i have to find the root couse of this problem
    problem is  two outbound delivery getting generated for one sales order with same no of quantity
    Now i am unable to find the approch what can be root cause of this problem , I checked the details of these deliveries these are created by some job , but even in job history any positive solution comeout,
    please suggest me what are other ways or causes of this problem

    Hi there,
    Delivery split will be there is the header data in shipping is different.
    For eg of shipping points, delivery dates, ship-to etc are different.
    Apart from this in the copy control routines at the headerlevel from OR to LF in VTLA, there might be some customized code written to split the deliveries. Possible conditions could be items from different warehouses / storage locs or if the quantity is more, then a delivery split.
    Pls check if there is any customised code written in copy control routines in VOFM.
    Regards,
    Sivanand

  • How to create one GR document for mutiple Purchase orders

    Can you please explain me in SAP - How to create one Goods Receipt document for reference of Multiple purchase orders.

    Dear Tanuj,
    Both Rama & Stephen are correct.
    You can take Single GR for Multiple PO either in MIGO or MB01 as long as that POs belongs to same vendor.
    In MIGO, after putting the PO press,enter,  again give the next PO of that vendor .
    If this solve your problem, close the issue.
    With Regars,
    Krishna Reddy

  • How to create PMCO table entries for few PM Order

    Hi Experts
    By a lack of Customizing we have used for few day a PM order type without the flelds AFKO-KLVARP and AFKO-KLVARI set.
    For this missing setting no entris had been created during Creation and Confirmation in PMCO and PMCOQT tables.
    Now I've filled teh fields with a Zreport on AFKO table, but now I need to create the PMCO* data using RIPMCO00 report.
    Unfortunately it doesn't work. Is there a way to re-build this missing datas ???
    Thanks for your help.
    Claudio
    Edited by: Claudio Carrara on Feb 15, 2012 3:48 PM

    Run the program RIPMCO00, has no effect because tables PMCO and PMCOQT are empty for these order.
    This hapepns becuase when the Order was confirmed, teh fields AFKO-KLVARP and AFKO-KLVARI was null.
    Now I've fixed these fiels, and I need to rebuild PMCO datas, burt report doesn't work because PMCO and PMCOQT tables are empty.
    I need to create PMCO and PMCOQT entries in advance.
    How I can proceed ???
    Thanks
    Claudio

  • Is it possible to create outbound delivery for sales order with FM: GN_DEL*

    Hi all,
    Is it possible to create an outbound delivery for a sales order using the FM: GN_DELIVERY_CREATE. I am choosing this over a BAPI as I also needed to fill the bill of lading and inco terms.
    Thanks

    Hi Gurus, is there any function module / Bapi that updates the BOL in a outbound delivery  header created for a sales order

  • Create outbound delivery for in-transit stock

    hi,
    the situation is that i need to create an outbound delivery for a sales order considering In-transit material let say item 20 in sales order.
    this item 20 is NOT present in the plant but is in transit from another plant.
    normal SAP wont allow creation of delivery if stock is not present in plant. hence we have marked a special indicator for that material.hence while doing the availability check in VL10 , it should allow me to create outbound delivery.
    The issue is i need to know the place where i can manipulate this availability check so that it considers this item 20 as special case and allows the Delivery to be created.
    there is a check indicator field MTVFP, but i cant find where is it comparing this field .
    thanks.

    Hi,
    Kindly check the Info Record.
    whether you have maintained delivery date or not.
    _Otherwise automatically pick the delivery date as from Item line delivery date
    ._But you can have the delivery date field in shipping tab.
    SAM
    Edited by: Saminathan Gopalan on Jun 28, 2010 1:59 PM
    Edited by: Saminathan Gopalan on Jun 28, 2010 2:00 PM

  • Creating  outbound delivery for no availability check

    The stock for a material is zero (in T-code MMBE). There is no availability check for this material.
    I could successfully create a sales order for this material.
    But when I try creating a outbound delivery for this material it doesnt allow me to do. What could be the problem.
    I checked the delivery item category, schedule line. They also have no availabilty check.
    What are the settings I need to check so that I can create a outbound delivery successfully,

    hi,
    delivery cant happen without stock of the material under standard conditions. if avaiilability check is not there for that material the system confirms the req delivery date of the customer and when doing delivery for the schedule line system checks for the stock and obviously throws an error. this is a very normal situation.
    post stock for the material and delivery willl be processed.
    regards
    sriram

  • Unable to create outbound delivery for STO??

    Hi All,
    I am trying to create an outbound delivery for a cross company code stock transport order, but when I try to do so in Txn VL10B the system does not create any.
    What I have observed is that in the STO I do not get any delivery creation date in the shipping tab. the system is not determining delivery creation date.
    Does anyone have any idea why it is so? Why the system is not able to determine the dleivery creation date? I have tried by creating STOs for many materials, but none works!
    Regards,
    V S

    Hi
    Pl check the settings:
    Below is the sto check list:
    Check all your settings once again for creating inter-company billing:
    - Material should exist in both plants.
    - Stock will be maintained in D-Plant (Delivering).
    - Now Plant - R (Receiving) become the customer of Plant-D.  So create a dummy customer in Plant-D's company code and sales area.  
    - Assign this customer number to Plant -R's details & its selling sales area.
    - Maintain the intercomapny billing type (IV) in ur sales doc type (OR).
    - Assign the Plant-D to selling sales org+ dbt channel.
    - Maintain relevant copy controls between documents.
    by doing all this then create po and check wheather do u got the shipping tab in the purchase order, if yes then replenishment del will be created.
    With Regards
    baalakrushnan.da

  • How to create the return delivery in MM

    Hi,
    Please let me know the detailed steps as to how to create the breturn delivery for the Po in MM with reference to Advanced shipping notification in sus.
    Our ins MM-XI-SUS scenario.
    thanks,
    Manu

    Table MARDH has been introduced from version 4.6B. This table represents history stock i.e. stock for previous months.
    Stock for previous month gets updated in table MARDH when the transaction takes place in the current month. e.g. if a material is having stock of 30 nos. as 30th April'06 and there is goods issue for this material on 5th May'06 for 5 nos. then entry will get updated in table MARDH for month 02 (assuming fiscal year is from April to March) with stock qty as 30 nos. If no transaction takes place then entry will not flow to MARDH.
    Hope the above is clear.
    Regards
    Rakesh Pawaskar

Maybe you are looking for