How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

Similar Messages

How to create transaction for FM

Hi All,
Can anybody please let me know How to create transaction for FM which can direct run by passing value and return the result.
I want to create transaction code for my function module.Please let me know how we can achieve that. tahnsk in adavance.
Regards,
Kalpana
Message was edited by:
 kalpana k

Hi,
You can create transaction code for your FM. First create a report program in SE38. and call you FM as shown in below example.
report Zxyz.
constants: gc_viewname like dd02v-tabname value 'YFIT_COST_RATE'.
start-of-selection.
call function 'TABLE_CUSTOMIZING_MAINTENANCE'
 exporting
 tabname = gc_viewname
 exceptions
 no_views = 1
 others = 2.
if sy-subrc <> 0.
 message a007(e2) with gc_viewname.
endif.
similar to this FM you can call your FM and you can write your processing logic after FM call.
thanks,
sksingh

How to Extract Data for a Maintenance View, Structure and Cluster Table

I want to develop 3 Reports
1) in First Report
it consists only two Fields.
Table name : V_001_B
Field Name1: BUKRS
Table name : V_001_B
Field Name2: BUTXT
V_001_B is a Maintenance View
For this one I don't Find any Datasource
For this Maintenance View, How to Extract the Data.
2)
For the 2nd Report also it consists Two Fields
Table name : CSKSZ
Field Name1: KOSTL (cost center)
Table name : CSKSZ
Field Name2: KLTXT (Description)
CSKSZ is a Structure
For this one I don't Find any Datasource
For this Structure How to Extract the Data
3)
For the 3rd Report
in this Report all Fields are belonging to a Table BSEG
BSEG is a Cluster Table
For this one also I can't Find any Datasource,
I find very Few Objects in the Datasource.
For this One, How to Extract the Data.
Please provide me step by step procedure.
Thanks
Priya

Hi sachin,
I don't get your point can you Explain me Briefly.
I have two Fields for the 1st Report
BUKRS
BUTXT
In the 2nd Report
KOSTL
KLTXT
If I use 0COSTCENTER_TEXT Data Source
I will get KOSTL Field only
what about KLTXT
Thanks
Priya

How to create transaction for table maintinance generator

what is the procedure(steps) to create transaction for a table maintinance generator

Hi,
The link will be useful for ur requirement.
allaboutsap.blogspot.com/2007/04/table-maintenance-in-sap-step-by-step.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8129f164-0a01-0010-2a8e-8765287250fc
REgards,
Sarosh

Hi, I have the DPS Single Edition is but the Folio Producer public when the folio I alone was deprived. Why? How do I publish for the public? Thank You

Hi, I have the DPS Single Edition is but the Folio Producer public when the folio I alone was deprived. Why? How do I publish for the public? Thank You

You should look at our Single Edition publishing guide. You don't use Folio Producer with Single Edition. http://help.adobe.com/en_US/ppcompdoc/Step_by_step_guide_to_dps_se.pdf
Note that support for Single Edition in Creative Cloud ends on May 1st. Make sure you get your app completed and approved by Apple before then.
Neil

Create transaction for table

Hi experts,
Can anybody help how to create transaction for table maintenance generation?
Thanks in advance,
Zak.

Hi
Check this:
Table maintennace generator is used to create screen to maintain values in a table. Once you create maint generator you can goto transaction SM30 and add data to table . In SAP it is more relevant to customizing data.
Create a table maintance program for a z table :
In transaction SE11, in the attribute tab of your z table check table maintenance check box. Go to SM30 transaction, enter the ztable name and click on maintain button. Here you can enter new entries into the ztable .
Or
You can create a PARAMETER TRANSACTION for the transaction for SM30 .
Follow these steps :
1. go to transaction SE93 , give your own transaction code say ztran_tab, for maintaining your ztable.
2. Click on create button and check the radio button Transaction with parameters (PARAMETER TRANSACTION) and click on the tick button.
3. In the next screen enter default values:
transaction : SM30
check the check box skip initial screen
4. Scroll down you will find a table control for default values
Name of the screen field | value
VIEWNAME | your ztable name
SHOW | X
Save your work.
Now as you have created a custom transaction for maintaining your ztable this transaction can be called from any program with CALL transaction 'XXX'.
Regards,
Vishwa.

How to create Variables for the Key Figures

Hi All,
How to create Variables for the Key Figures
Thanks
Bhaskar

Hi,
It is not possible to create the variables on Key figures directly. But we can create a formula variable with processing type 'User Entry' ,SO that the user entered value can be used in the calculations of the query.
With rgds,
Anil Kumar Sharma .P

Create Transaction for web-dynpro ABAP

hi
Can you help me in creating a transaction for web-dynpro ABAP.
thank you.

If you want a SAPGUI transaction code that will launch your Web Dynpro ABAP application then I suggest creating a parameter transaction code that wraps around the SAP standard transaction code WDYID. You can use the parameter STARTMODE to decide if you launch your browser within the SAPGUI window or if it opens a new browser window. You will get SAPGUI based Single Sign On with this transaction code as well. Here is an example of a TCode I setup:
http://www.flickr.com/photos/tjung/2758987559/
And here is what it looks like when running in place within the SAPGUI:
http://www.flickr.com/photos/tjung/2758987583/

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

How to find Transaction for a Known Table maintenance View

Hello Friends,
May I know how to find transaction for a known table maintenance View.
Thanks,
Best Regards,
Sudhanshu Garg

Goto SE16 Transaction and enter TSTCP Table
Here PARAM = /SM30 VIEWNAME=Table name*;UPDATE=X;
enter table name in bold.
Thanks
Seshu

How to create EVENTS for a View Cluster.

Hi Tech Gurus,
I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
Thanks in advance for your esteemed replies.
Regards,
Raghavendra Goutham P.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field FORM routines main program. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create wizard for a custom mainenance view/view cluster

Hi Experts,
I have created 5 custom maintenance view and have maintained all the views sequencially and have made the first mainenance view as the start view & header entry and all other views are child or subview of the header view in a custom view cluster. But I want a wizard to help the user / end user successfully enter all the required values for all child views, it will help the user to navigate from the start view to all the child views where the fields of the wizard will be associated to the child maintenance views.
Please suggest how to create wizard for view cluster.
I'll give max reward point for the helpful answer.
Thanks in advance
koustav

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field FORM routines main program. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create F4 for the standard transaction

Hi all ,
How to create F4 for the standard transaction for a particular field .
Bye

Santosh,
You can create F4 values for a field in a standard Transaction .
1. First search for a standard search help meeting your requirement .
2. If you don't find one, create your own custom (z) serach help .
( 1 is preferable )
After that, include that serch help to the standard field in the transaction .
For this u need to go to the screen
( F1->F9-> screen-> Field )
Click on the property of the field and include the search help .
You ll require the access key from the basisi guys as u r changing standard .
Hope it helps,
~ laxmi
Reward for helpful answers

How to create transaction for a maintenance view, Thank you.

Similar Messages

Maybe you are looking for