How to enable syntax highlighting for jspf files on Dreamweaver CS5.5 on Mac

I ran into an issue where I couldn't get the color coding (color coding style) for java server pages fragments (.jspf) files to show syntax highliting.
I followed the adobe instructions on Changing and adding file extensions recognized by Dreamweaver without any luck.
Here is the solution that worked for me:
On a Mac:
1. Edit the /Users/YOUR USER/Library/Application Support/Adobe/Dreamweaver CS5.5/en_US/Configuration/DocumentTypes/MMDocumetTypes.xml
Note: the Adobe instructions tell you to edit /Applications/Adobe Dreamweaver CS5.5/Configuration/DocumentTypes/MMDocumetTypes.xml (Editing this file didn't do anything for me, so you need to change the file above instead)
Find,
<documenttype id="JSP" servermodel="JSP" internaltype="Dynamic" winfileextension="jsp,jst" macfileextension="jsp,jst" file="Default.jsp" writebyteordermark="false" mimetype="text/html">
Replace with,
<documenttype id="JSP" servermodel="JSP" internaltype="Dynamic" winfileextension="jsp,jst,jspf" macfileextension="jsp,jst,jspf" file="Default.jsp" writebyteordermark="false" mimetype="text/html">
2. Edit the /Users/YOUR USER/Library/Application Support/Adobe/Dreamweaver CS5.5/en_US/Configuration/Extensions.txt
In the All: section on top add the jspf extention right after jsp in my example it looked like this
HTM,HTML,SHTM,SHTML,HTA,HTC,XHTML,STM,SSI,JS,JSON,AS,ASC,ASR,XML,XSL,XSD,DTD,XSLT,RSS,RDF, LBI,DWT,ASP,ASA,ASPX,ASCX,ASMX,CONFIG,CS,CSS,CFM,CFML,CFC,TLD,TXT,PHP,PHP3,PHP4,PHP5,PHP-D IST,PHTML,JSP,WML,TPL,LASSO,JSF,VB,VBS,VTM,VTML,INC,SQL,JAVA,EDML,MASTER,INFO,INSTALL,THEME,CONFIG,MODU LE,PROFILE,ENGINE,SVG:All
and I added the jspf and it looks like this now,
HTM,HTML,SHTM,SHTML,HTA,HTC,XHTML,STM,SSI,JS,JSON,AS,ASC,ASR,XML,XSL,XSD,DTD,XSLT,RSS,RDF, LBI,DWT,ASP,ASA,ASPX,ASCX,ASMX,CONFIG,CS,CSS,CFM,CFML,CFC,TLD,TXT,PHP,PHP3,PHP4,PHP5,PHP-D IST,PHTML,JSP,JSPF,WML,TPL,LASSO,JSF,VB,VBS,VTM,VTML,INC,SQL,JAVA,EDML,MASTER,INFO,INSTALL,THEME,CONFIG,MODU LE,PROFILE,ENGINE,SVG:All
That's it, Quit Dreamweaver and open it up again. Open the .jspf file and see the color coding (syntax highlighting)
Hope this helps you and seves you time figuring it out. If this helped, do a good thing, next time you figure something out, tell others about it to save their time too, like I did. Enjoy.

TheGrandNabib wrote:
I don't seem to have a user Library folder, my only Library folder is on the same level as my Users folder.
From Locating your personal configuration folder in the Dreamweaver FAQ:
In Mac OS X (Lion and Mountain Lion), open Finder and press Shift-Cmd-Go. Type ~/Library/Application Support in the dialog box, and click Go. You should then be able to find the configuration folder.

Similar Messages

How do I enable syntax highlighting for jspf files on Dreamweaver CS6 on Windows?

I followed the instructions (which I modified for CS6) in this posting: http://blog.metameister.com/blog/2011/04/08/open-new-file-types-and-add-syntax-highlightin g-in-dreamweaver-cs5-on-window…
but it did not work for CS6.
How do I enable syntax highlighting for jspf files on Dreamweaver CS6 on Windows 7?
cheers
Marvin in Edmonton

Ok, I figured it out after hunting for a few hours.
Step 1. Add the File Type
In Dreamweaver’s toolbar:
Select Edit > Preferences;
under File Types / Editors, add .jspf to the line “Open in Code View:”.
Step 2. Extensions.txt
Add file type .jspf to the Extensions.txt files. There are two of these files:
C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration
C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS6\configuration
Step 3. MMDocumentTypes.xml
Add jspf to the MMDocumentTypes.xml files. Open this file in Notepad or Text Editor. Do not modify the Dreamweaver configuration files within Dreamweaver.
There are three MMDocumentTypes.xml files to be modified:
C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS6\configuration\DocumentTypes
C:\Users\mhaagsma\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration
C:\Users\mhaagsma\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\DocumentTypes\
Step 4. Restart Dreamweaver
Hopefully the file type will now be recognized and appear with syntax highlighting.

Syntax Highlighting for LESS CSS in Dreamweaver CS5.5

This article describes how to add the .less extension to Dreamweaver so that it views it as CSS and thus performs proper syntax highlighting.
I'm using Dreamweaver CS5.5 and following those steps still doesn't work for me. It works perfectly fine in CS5 and earlier versions but not CS5.5.
Do you have any ideas? I'm modifying the following file as the above link suggests:
C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS5.5\configuration\DocumentTypes\MMDocumentTypes.xml

Aegis Kleais wrote:
Sorry, Al, but I couldn't disagree more. Where I respect the fact that, as coders, we're rather ingrained with our workflow processes and, at times, hesitant to change, I've found LESS' benefits to be very worthwhile.
No need to apologize. Preprocessing is a topic on which there are differing opinions. You have one. I have one. There are advocates:
http://blog.urbaninsight.com/2012/04/12/ten-reasons-you-should-be-using-css-preprocessor
There are those who are not sold:
http://blog.millermedeiros.com/the-problem-with-css-pre-processors/
http://www.skybondsor.com/blog/css-preprocessors
There are those mostly sold:
http://css-tricks.com/musings-on-preprocessing/
There are even those who have been converted (but who might reverse at some later point):
http://cognition.happycog.com/article/preprocess-this
Heck, even I might be converted someday - or not
Bottom line for me, right now? I know I can write CSS that is better than most, more efficient than most, and easier to follow than most, and a preprocessor would add unwanted complexity. But that's for me. For someone not able to be organized intutively, or for a large - but carefully coordinated - team, a preprocessor could be a positive.
But not for me.
There are evolving trends - popular aspects of the technology that may and should find themselves being adapted into CSS. But I've been around this business as long as CSS has. I've seen buzzwords and trends and I've historically been spot-on in predicting the one that will stick. I think preprocessing will stick - but only insofar as it will be a catalyst for features in future versions of CSS. As a separate technology it makes no sense - to me

Syntax Highlighting for custom file extensions

Hi everyone.
I am currently working on a PHP project, and we are using
*.thtml files for templates. The file isn't supported by
Dreamweaver, as it's a fictional file extension. First I couldn't
even open it with Dreamweaver, but after I added it in
settings/file types, it worked.
Now my question - how can I activate syntax highlighting for
this filetype? It contains HTML and PHP, so it should work with the
same highlighter as all the other file types do..
Can someone help me out?
Thanks.
- Chris

Got it
http://alexle.net/archives/119

Enable syntax highlighting with configuration file in emacs

When editing configuration files such as .procmailrc, .fetchmailrc, Emacs won't automatically highlight syntax for me.
I can enable syntax highlighting in Vim by appending "syntax on" to the .vimrc.
I tried adding "global-font-lock-mode t" in the .emacs file, but it didn't solve my problem.
What is the solution?

igndenok wrote:
Some of my config file have this (using conf-unix-mode)
# this is .somerc
# -*- conf-unix -*-
Or using this in your .emacs
(add-to-list 'auto-mode-alist '("\\.*rc$" . conf-unix-mode))
I followed your advice, and it does have some syntax highlighting, but less than Vim does.
For example, Vim will highlight all the names of colors in the .muttrc file, but Emacs doesn't.
I guess Emacs is not as strong as Vim when it comes to editing configuration files.
Last edited by yu3k (2011-09-14 10:06:47)

Pacman.conf file syntax highlighting for nano

Hi, here is pacman.conf file syntax highlighting for nano. It may be useful for those who edit their pacman.conf regularly.
Just put this lines in the end of your /etc/nanorc or ~/.nanorc file:
# syntax highlithing in pacman.conf
syntax "pacman.conf" "pacman\.conf$"
color brightwhite start="\[" end="\]"
color brightyellow ".*="
color brightred "=.*"
color white "="
color brightblue "\[|\]"
color brightcyan start="/|http|ftp" end=".*"
color green "#.*"
In this thread you can find rc.conf file syntax highlighting.

thank you! i always accidentally open up nano, find out text is practically unreadable with its default colours, close it and then wait the horrific 4 seconds it takes for emacs to spring to life.

Rc.conf file syntax highlighting for nano

Hey, here is rc.conf file syntax highlighting for nano. It may be useful for those who edit their rc.conf regularly.
# syntax highlithing in rc.conf
syntax "rc.conf" "rc\.conf$"
color brightwhite ""(\\.|[^\"])*""
color brightwhite "$(\\.|[^\"])*$"
color brightred "![^> ]+"
color brightcyan "@[^> ]+"
color brightyellow ".*="
color white "="
color brightblue ""|$|$"
color green "#.*"
Put this lines into /etc/nanorc or ~/.nanorc

thank you! i always accidentally open up nano, find out text is practically unreadable with its default colours, close it and then wait the horrific 4 seconds it takes for emacs to spring to life.

Syntax Highlighting for MATRIXx MathScript and TPL

There have been some questions about text editors for MATRIXx, so I wanted to let everyone know about an application note that we just posted. It describes how to configure a syntax highlighter for use with MathScript and Template Programming Language (TPL). There is also an example of how Crimson Editor can be configured. I choose Crimson Editor because it was free, but the same thing can be done in other syntax highlighters. Using a syntax highlighter makes MATRIXx code a lot easier to read.
http://zone.ni.com/devzone/conceptd.nsf/webmain/C43375149CB01C3186256E530081EAA5
While I am at it, I am going to point out some other resources. The application note is located on Developer Zone section of our website, where
you can find other MATRIXx examples and tutorials:
http://zone.ni.com/devzone/devzone.nsf/webcategories/A92DB8BA2DE149F486256CBC00655A0C?opendocument
If you have code or examples that you want to share with other users you can submit the example to the Example Code Library:
http://www.ni.com/devzone/dev_exchange/ex_search.htm
Suggestions and feedback can be submitted from Product Feedback section of Contact NI:
http://sine.ni.com/apps/we/nicc.call_me?p_action=country&p_lang_id=US
And of course the main MATRIXx page is:
http://www.ni.com/matrixx
Carl L
National Instruments

I found another editor with syntax highlighting capabilities for MATRIXx. The editor is VIM which is based on the Unix VI editor, and is available on both Solaris and Windows.
www.vim.org
Carl L
National Instruments
www.ni.com/matrixx

How to install Syntax highlighting

Okay, so I'm trying to get syntax highlighting for my jscrollpane, which I have been lead to use: http://ostermiller.org/syntax/
I downloaded the jar file, but I was wondering what do I have to do to start using the classes, I'm completely losses, I don't even know where to put it.

Well I don't know if this is the right way, but it seems to be at least going somewhere. I extracted the files of the jar file and put the all the extracted folder into the class folder of my current program. Then I tried to import the package with
import com.Ostermiller.Syntax.*;and when I complied it, it works so far.
but when I try to create an object it can not access it:
ToHTML toHTML = new ToHTML(); gets this error message,
--------------------Configuration: TEV3 - j2sdh1.4.2_13 <Default> - <Default>--------------------
C:\Program Files\Xinox Software\JCreatorV4LE\MyProjects\TEV3\src\TEV3.java:22: cannot access com.Ostermiller.Syntax.ToHTML
bad class file: C:\Program Files\Xinox Software\JCreatorV4LE\MyProjects\TEV3\classes\com\Ostermiller\Syntax\ToHTML.class
class file has wrong version 49.0, should be 48.0
Please remove or make sure it appears in the correct subdirectory of the classpath.
ToHTML toHTML = new ToHTML();

How to enable remote debugging for a session other than the current one

Hi all,
I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
The docs indicate that I should be able to do so:
dbms_debug_jdwp.connect_tcp(
host IN VARCHAR2,
port IN VARCHAR2,
session_id IN PLS_INTEGER := NULL,
session_serial IN PLS_INTEGER := NULL,
debug_role IN VARCHAR2 := NULL,
debug_role_pwd IN VARCHAR2 := NULL,
option_flags IN PLS_INTEGER := 0,
extensions_cmd_set IN PLS_INTEGER := 128);
But when I try (even as sys), I get the following:
exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
00022. 00000 - "invalid session ID; access denied"
*Cause: Either the session specified does not exist or the caller
does not have the privilege to access it.
*Action: Specify a valid session ID that you have privilege to access,
that is either you own it or you have the CHANGE_USER privilege.
I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
Regards,
K.

How to increase page size for balance file upload in Workspace.

Hi All,
Please suggest how to increase page size for balance file upload in shared Workspace pages.
Thanks,

A word of caution is in order regarding changing from facing to non-facing and back again. If you have overridden master page items, you'll get a second, non-overridden copy on all the even-number pages when that half of the master page is re-applied. This applies to master text frames which override automatically when text flows into them as well as to objects you manually override. I think you'll find this particular technique also only works for master text frames, whereas the Layout Adjustment should work in all situations where frames snap to guides.

How to enable push mail for gmail in iphone 6 plus

how to enable push mail for gmail in iphone 6 plus

Tommacgr wrote:
You can setup gmail account in iphone as exchange so the trick is simple and easy and push notification work after instantly . Just follow this steps http://email.about.com/od/iphonemailtips/ss/Set_Up_Push_Gmail_in_iPhone_Mail_Ste p_by_Step_Screenshots.htm
You can only set up a Gmail account as an Exchange account if you have a paid account. Google dropped Exchange support for free accounts two years ago. That link is just a bit outdated.

How to enable cascade view for sites(iStore) in 11i?

How to enable cascade view for sites in 11i?

Hi,
For this issue, I'm trying to involve someone familiar with this topic to further look at it.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback
for TechNet Subscriber Support, contact [email protected]
Wendy Li
TechNet Community Support

How do I search iPhone for a file?

How do I search iPhone for a file? I think there is an easy search function, but I cannot find it on my iPhone 4s (IOS8)

The search function is Spotlight. You can open it by swiping down with one finger -- start the swipe on the screen, not above the top of the screen.

How can I convert a dBase IV file to Excel on my MAC computer??

How can I convert a dBase IV file to Excel on my MAC computer??
I downloaded the DoxBox program which enables me to use DOS programs such as dBase in my new MAC computer and it does work nicely!!

This is what Excel now imports:

How to enable syntax highlighting for jspf files on Dreamweaver CS5.5 on Mac

Similar Messages

Maybe you are looking for