How to explain the business requirement of a file to rfc scenario

Hello Experts,
                   How do i explain the business requirement of
    1. FILE TO IDOC.
    2. FILE TO RFC.
    3. FILE TO JDBC scenarios?
        Cud anybody explain me how to explain the requirement of these scenarios in an interview?Cud u pls send me the example for these and the systems involved and the documents involved...helpful answers will be rewarded...
                                                                                cheers
                                                                                Jay.
my mail :  [email protected]

<b>1. FILE TO IDOC</b>.
When u have ur master data stored in a file thru a legacy system say in some xml format then u may need to have this scenario configured.
<b>2. FILE TO RFC.</b>
Consider pt1 but here for example consider delete scenario. when u have deleted the mater/transaction u may need to update another file...so in this case u will need to config this scenario...y we cannot use idoc is becoz sync scneario is not possible with idoc but yes with rfc
<b>3. FILE TO JDBC scenarios?</b>
u have some business data extracted from a file and before u update a r3 transaction u may need to refer a datbase table to read some data baed on keyfield...so u will take a jdbc response and based on that u may validate with the data for r3 updation.
the scenario keeps varying in real life and the above are very few examples of the kind of scenario that would exists in the business world

Similar Messages

  • How to install the Business Content Cube 0PP_C02

    Hello,
      Can you please explain me how to install the Business Content Cube 0PP_C02 .
    What are the nesessary steps involved in this process. How this Standard Cube is available in
    AWB -> Modeling.
    What are the nesessary steps involved in the R/3 side.
    CAn you please help me in this.
    Thanks alot.
    Regards,
    Anitha

    Hi anitha
    TRy this
    To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
    The following figure displays the DataSources in an overview according to the application component.
           2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
    The DataSources lying under the subtree and other subtrees are selected.
           3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
    DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
           4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
           5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
    If an error occurs, the error log appears.
    Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
           6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
    and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
    this will solve ur issue..
    Prasanna

  • Could u explain the business process

    hi guru's
    could u explain the business process scenario ,  how it works in bw . could u explain detailed, suppose to take CLINT NOKIA MOBILE AND MY EMPLOYER SOME  XX COMPANY,
    CAN U EXPLAIN DETAILED?

    Hi Prabha,
    Aggregate Definition :
    An aggregate is a materialized, aggregated view of the data in an InfoCube. In an aggregate, the dataset of an InfoCube is saved redundantly and persistently in a consolidated form on the database.
    Use
    Aggregates allow quick access to InfoCube data during reporting. Similar to database indexes, they serve to improve performance.
    An aggregate is made up of the characteristics and navigation attributes that belong to an InfoCube. Characteristics that are not used in the aggregate are compressed.
    Each component of an aggregate has to be assigned to a selection type. A selection type indicates the degree of detail to which the data in the underlying InfoCube is aggregated. You can choose one of the following selection types:
    All characteristic values ("*"): The data is grouped by all values of the
    characteristic or navigation attributes .
    Hierarchy level (“H”): The data is grouped by the hierarchy level node. You can
    also store values on the hierarchy levels of an external hierarchy .
    Fixed value (‘F’): The data is filtered by a single value .
    For each InfoCube, you can set whether the aggregates of the InfoCube are compressed automatically when it is filled with data or after the roll up of data packages (requests).
    1. You are in the Data Warehousing Workbench in the Modeling functional
    area. In the InfoProvider tree, navigate to the required InfoCube.
    2. In the context menu of the InfoCube, choose Manage.
    3. In the lower part of the screen, select the Roll Up tab page.
    4. Under the Aggregates group header, set the corresponding indicator in
    the Compress After Roll Up field.
    Standard Aggregation : This means how the key figure is going to be summarized normally for a specific set of characteristics .
    Eg : Quantity across all the purchase items for a purchase Order
    Exceptional Aggregation : You define how the aggregation should happen basing on a particular characteristic ( Usually time characteristic ) .
    Eg : head count ( No of Employees ) in a organisation ..--> this should not be summarized on a daily basis..instead this should give a final value at the end of the month .
    Aggregation is basically for keyfigures .
    take a look at this doc, you will find all your answer:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbd2d390-0201-0010-8eab-a8a9269a23c2
    Refer this for aggregates
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
    Aggregates versus Physical Cube Splits?
    http://help.sap.com/saphelp_bw33/helpdata/en/c5/40813b680c250fe10000000a114084/frameset.htm
    http://help.sap.com/saphelp_bw33/helpdata/en/ca/aa6437e7a4080ee10000009b38f842/frameset.htm
    Question1: how we will see the based on aggreagate what querys are running
    I think "aggreegate maintance screen ---proposal -
    query proposal" i am right ,if it is worng pls correct me?
    Answer 1:
    There are two tools that are used to analyze which aggregate is suitable for which navigation step.
    You optimize the start screen of a query with the query Monitor (transaction RSRT) if you execute the function Execute + Debug.
    With the trace tool (transaction RSRTRACE) you can draw several navigation steps, and process them again using the function DB Debugging (exact path: Transaction RSRTRACE > Goto > User Logs or All Logs > double-click on the log you want > DB Debugging).
    Refer The OSS note 99010
    Question 2: When i am creating a aggregate what charteristics we choose i mean based on report/some thing else?
    Answer 2:
    By refering the Statistical data and comparing the Proposed Aggregates we can create the aggregates.
    The above RSRT and RSTRACE will be more useful tools to plan an Aggregate.
    Refer
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a67abe07211d2acb80000e829fbfe/content.htm
    and other option is:
    Refer page 36 in this PDF
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
    Question 3:
    When we are crearting a agreegate one message box will apper in that we one option "proposed aggregate" wht does it mean how it work??
    Answer 3:
    Based on the Statistical data and query-aggregate data system will propose the new aggregate definitions.
    Question 4:
    under what senario we apply for query performance aggregates??
    Answer 4:
    Refer this PDF
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbd2d390-0201-0010-8eab-a8a9269a23c2
    For more info refer:
    http://help.sap.com/saphelp_nw04/helpdata/EN/7d/eb683cc5e8ca68e10000000a114084/frameset.htm
    https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D133%26threadID%3D51253%26messageID%3D526450%23526450
    You have a aggregate document by SAP in http://service.sap.com/bi -> BI Infoindex which would answer all your questions.
    http://help.sap.com/saphelp_nw04/helpdata/en/7d/eb683cc5e8ca68e10000000a114084/content.htm
    It would be very useful for you to go through the performance tuning with aggregates documents here:
    Business Intelligence Performance Tuning [original link is broken]
    Look at the thread below for index:
    Indexes, Aggregates , partitioning of cube
    Hope this helps.
    Regards,
    Ravikanth

  • The business requirement is invoice clearing process is automated

    Hi sap gurus can any one tell me the below process
    the business requirement is invoice clearing process is automated how is that possible in sap is there any process we need to follow

    hi,
    there is no such limitation in std SAP. but u need to check if u hve maintained limits on the max order value or if some user exit is already in place.
    saurabh

  • How to learn the Business Process and how it is related to BI?

    Dear Experts,
    How to learn the Business Process? for example the business process from finance to sales. As I am more involved in technical development of BI; I dont know or having very hard time to understand what the business process. And how the Business Process is related to BI?
    I think if I don't understand the business process than it is very hard to satisfy the User requirements. If you have any documentation please feel free to forward it to [email protected]
    I wish you happy new year. Thank you in advance.
    Aslam.

    If only plan data entered, try to delete the planning data before delete the object and then re-create it again. Otherwise you may have to leave it as is and change the description for the usage by the different company code.

  • EEWB :  how to determine the business object and the extension type ?

    Hi,
    I ask myself how to determine the business object and the extension type to use to add new fields in a new tab of a specific transaction ? what means each business object, does that correspond to a specific transaction ?
    I need to add a new tab in the ‘BaMI’ business activity in transaction CRMD_ORDER just after the tab 'Actions' at header level.
    Could you help me please to determine which business object and extension type I have to select during creation of the project and which business object category I have to select during creation of the extension (wizard) ?
    Thanks for your help,
    Marie

    Marie,
    In order to determine what type of transaction you are extending, you will need to look at the customizing for the transaction.
    In the IMG:
    Goto:
    Customer Relationship Management->Transactions->Basic Settings->Define Transaction Types.
    You will then choose the transaction defined that you want to extend.  If you display the details of the transaction you will find an attribute called:
    "Leading Transaction Category".  This tells you the general context in which the transaction is used.  The other item to view is the assignment of business transaction categories found in the maintenance screen.
    This information general corresponds to one of the options that the EEWB will give you on the transaction type.
    As far as extensions go, my recommendation is the following:
    - Use CUSTOMER_H Customer Header Extensions for any new fields at the header level.
    - Use CUSTOMER_I Customer Item Extensions for any new fields at the item level.
    Unless you have a specific requirement to extend a segment of the transaction, I recommend placing all new fields in these segments.  The CUSTOMER_H & CUSTOMER_I segments are considered "standard" segments, that are already built into all the necessary API structures. 
    Let me know if you have any further questions.
    Good luck,
    Stephen

  • How to read the business partner activity

    Hi experts,
    How to get the business partner(role:employee) assigned activities  in crm and how to create the activity .my requirment is change the assiged from old employee(bp) to new employee(bp). i have to develop the program. i searched some BAPI's.
    Please help on this.
    thanks,
    venu.

    Pls use the FM CRM_REPORT_CALL_RF. Pass the partner function to the exporting parameter table ir_partner_fct_h and partner number to the partner number to  ir_partner_id_h . You will get all the guid and then use CRM_ORDER_MAINTAIN to change the partner.
    CALL FUNCTION 'CRM_REPORT_CALL_RF'
        EXPORTING
          iv_stat_open            = 'X'
          iv_maximum_hits         = ' '
          ir_object_type_h        = it_act_objtype
          ir_partner_fct_h        = it_partner_fct_h
          ir_partner_id_h         = it_partner_id_h
        IMPORTING
          et_guidlist             = it_guid
        EXCEPTIONS
          parameter_error_partner = 1
          parameter_error_items   = 2
          parameter_error_ref_obj = 3
          OTHERS                  = 4.

  • How do I resolve this problem: This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required

    When attempting to log in to the web site the following message is received. This web site works
    on other systems using Firefox.
    This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.
    Additionally, a 401 Authorization Required error was encountered while trying to use an ErrorDocument to handle the request.
    == URL of affected sites ==
    http://www.mdyc.org/members_only

    You may have saved a bad password so Firefox is entering that rather than giving you the option to try again. Go to Tools > Options > Security > Saved Passwords and delete the saved passwords for that site and then try logging in again.

  • How to create the Business System both sender and receiver in SAP XI / PI

    Dear All
    kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
    Regards
    Blue

    Hi,
      If by any chance you are not able to find these....
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
    http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
    Regds,
    Pinangshuk.

  • How to see the business packages in my system..

    Hi,
    I have installed ECC6.0 with ABAP+JAVA componets on windows 2003 server. I wanted to see what Business packages installed in my system. Can you Please help me how to check the business packages means path.
    Thanks for you responses in advance.
    Regards,
    Bhaskar.T

    You can check in following ways:
    1. System Information --> All components
    2. You can also look for portal content for each business packages in Platform Based Content under Content provided by SAP.
    Hope this helps.

  • How to add the business transaction to t-code : CIC0 in win client

    Dear sir,
    We use CRM 5.0 . We would like to add business activity tranaction into t-code : CIC0. But I don't know how to do. Please kindlyadvise how to add the business transaction to t-code : CIC0 in win client.
    Thank u and best regards,
    Vimol

    Hello,
    For each transaction type (e.g. Sales Order, Business Activity, opportunity, ....) you can maintain in which channel (IC WebClient, IC WinClient, SAPGUI, PCUI, ...) they are allow to be used. Probably the transaction types you want to see in the IC WinClient (= CIC0) are not enabled for this channel, that's why they don't appear in the WinClient (CIC0).
    How to do this?
    SPRO>CRM>Transaction>Basic Settings>Define transaction types
    Here, look for the transaction types you want to enable in WinClient. Select the transactiont type and select "Channels" from the left pane. Here, add the channel "IC WinClient" (or something like that, I don't know the exact name anymore, in newer versions this no longer exists).
    Save and restart the CIC0, after this the transaction type should be enabled.
    Hope this helps,
    Joost

  • How to fetch the Business area field value from MIRo into report

    Hi,
    I want to create a report for MIRO with payment details.
    How to fetch the business area field value in to report.
    What is the table name. I verified it is storing in structure. Which is the right table for fetching that value with reference to MIRO.
    After that, how to find the accounting document for payment and check details.
    What are the table names and field names. What we can get from PAYR table.
    With regards
    Lakki

    Dear,
    For Bussiness area
    RKPF-GSBER

  • How to configure the Business Systems & Technical Systems into PI 7.0

    Dear All
    Kindly let me know how to configure the Business Systems and Technical Systems into PI 7.0
    any word document/PDF would be very helpful.
    Regards
    Blue

    Hi ,
    You have to do the configure/creation of  the Business Systems & Technical Systems  in SLD.Generally this is maintained by Basis team in the Project.If you are looking to learn how to create BS and TS in SLD
    You can find some useful information here on SLD concepts and creation of SLD
    http://wiki.sdn.sap.com/wiki/display/XI/WorkingwithSystemLandscapeDirectory+%28SLD%29
    Please refer this document for more understanding of SLD
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00462bb-b7a0-2a10-8da6-f6b89834f8b4?quicklink=index&overridelayout=true
    Regards,
    Srinivas

  • How to write the Business Process

    Can anybody please give me the link on How to write the Business Process for <b>IC_C03</b>... we have done the blue print and going to write the documentation for this info provider.
    So please provide the related links..........

    Probably the best thing to do is go to your boss/team lead/project manager/client contact and ask them what documentation they want you to produce and what should go in it.  No-one here can guess at that.
    Gareth.

  • How to link the Business Partner with the SAP User ID.

    Hi,
    We are working on a scenario wherein the resources are created as Business Partners in R/3.
    now How to link the Business Partner with the SAP User ID.

    HI AP,
    Maintain the business partner in role Internet User - BUP005.
    Now assign the existing user to this BP .(you can make this assignment in tab "internet user'. Just enter the user name in the field User and save).
    You can now see the link in table HRP1001.
    Cheers,
    Rishu.

Maybe you are looking for