How to go back to previous FCPX?

Hi.
I am in the midst of a couple projects this week.   My FCP was updated automatically by Maverik and I want to go back to the previous version, as I'm a bit wary of jumping into the new fcp 10.1 in the midst of 2 big projects...How do I go back??

First, switch off auto update in system preferences, or it will keep happening.
Second, don't update the OS in the middle of a project, but I guess it's too late for that.
Third, do you have a backup of the old version of the software, maybe in Time Machine? If so, put the 10.1 version in a folder called Final Cut Pro 10.1 and then restore 10.0.9 from Time Machine or your backup software.
If you don't have a backup you might be able to contact the App Store or a local Apple Store and see if you can get a copy of the previous version.

Similar Messages

  • XSLT For-Each Issue, how to traverse back to previous node

    How to get the SupplierName(Primary) from the below payload
    *+<ItemSupplier>+*
    +<SupplierParty>+
    +<SupplierName>SUPPLIER NAME 1</SupplierName>+
    +</SupplierParty>+
    +<ItemSupplierLocation>+
    +<Status>1</Status>+
    +<PriorityCode>N</PriorityCode>+
    +</ItemSupplierLocation>+
    +<ItemSupplierLocation>+
    +<Status>2</Status>+
    +<PriorityCode>N</PriorityCode>+
    +</ItemSupplierLocation>+
    *+</ItemSupplier>+*
    *+<ItemSupplier>+*
    +<SupplierParty>+
    *+<SupplierName>SUPPLIER NAME 2</SupplierName>+*
    +</SupplierParty>+
    +<ItemSupplierLocation>+
    +<Status>1</Status>+
    +<PriorityCode>N</PriorityCode>+
    +</ItemSupplierLocation>+
    +<ItemSupplierLocation>+
    +<Status>1</Status>+
    +<PriorityCode>Y</PriorityCode>+
    +</ItemSupplierLocation>+
    *+</ItemSupplier>+*
    The condition i need to run is as below, but as the control will be inside the <ItemSupplierLocation> how do i go back to previous node and get the value of supplier name.
    +<ItemSupplier> can be n number+
    <xsl:for-each select="ItemSupplier/ItemSupplierLocation">
    <xsl:choose>
    <xsl:when test='PriorityCode="Y" and Status="1"'>
    <Supplier>
    <xsl:value-of select="ItemSupplier/SupplierName"/>
    </Supplier>
    </xsl:when>
    </xsl:choose>
    </xsl:for-each>
    Thanks,
    Vijay

    Fixed the issue with the below code
    <xsl:for-each select="ItemSupplier/ItemSupplierLocation">
    <xsl:choose>
    <xsl:when test='PriorityCode="Y" and Status="1"'>
    <Supplier>
    <xsl:value-of select="../SupplierParty/SupplierName"/>
    </Supplier>
    </xsl:when>
    </xsl:choose>
    </xsl:for-each>
    Thanks,
    Vijay

  • How to go back to previous os version

    Hi,
    Could you please help to go back to previous iOs version because my mobile working dead slow...I have the following apps only
    Whatsapp,Facebook messanger,skype,online bank,candy crash game thats all remaning default application given by apple..
    Please tell me the solution for this how to work my without hang and slow process...

    retired_not_******** wrote:
    As you can't go back, purchase a new device with the old OS on it, transfer your sim and restore it with an old backup that is still the old OS and learn your lesson.
    DON'T UPDATE your device.
    That only works if there is a previous backup that is using an iOS that is the same or older as the version of the iOS on the device.  And if the OP ends up purchasing a device that, say is running iOS 6.0.1, but their backup is using 6.1.3, then they're still stuck with having to upgrade.
    It's far easier to simply accept the newer iOS, get used to it, and provide feedback to Apple about what imrovements/changes you'd like to see.  Functionally, iOS 7 is better.  Aesthetically, well, your mileage may vary.

  • How to go back to previous block?

    Hi,
    I got a problem in navigation.I want to go back to previous block if user click a button.I use the function: previous_block but it go back according to how you put inside your datablock tree.I cannot use go_block('block_name') function also because when user click that button, it can go back to different blocks according to different situtations.
    Can anyone help me what is the command to go to previous block??
    Thanks a lot.

    Create a Global variable GLOBAL.PREV_BLOCK
    Before leaving any block to go to another one (look for GO_BLOCK commands and KEY-NXTBLK triggers)
    :GLOBAL.PREV_BLOCK:=SYSTEM.CURSOR_BLOCK;
    When you wish to return to the previous block
    GO_BLOCK (:GLOBAL.PREV_BLOCK)

  • How to go back to previous page

    I have two JSP pages first.jsp and second.jsp the user starts at first.jsp and clicks the submit button which then takes the user to second.jsp where the users information is saved in a database. I want to know how to go back to first.jsp from second.jsp after the users info has been saved? I have been able to get the previous pages url information put I don't know what to do with it. I know there is a jsp:forward but don't think this can help me. PLEASE someone help me I am stuck and need to move forward.
    thank you

    Why do you think that jsp:forward will not fit your requirement? An alternative is to use sendRedirect()

  • How to go back to previous step in a sub workflow?

    We are calling a sub workflow upon approval action from a main workflow. In the child workflow we have 9 steps. If at any step in the child workflow (other than first) user does reject action, the workflow control should go back to previous step in the child workflow itself.
    We added a custom action in the exit events of all the child workflow steps. Following is the logic of exit event of Step4 of child workflow. Similar logic is there for all steps in the child workflow.
    <$if wfAction and wfAction like "REJECT"$>     
         <$wfSet("wfJumpTargetStep", "Step3@childWF")$>
         <$wfSet("wfJumpEntryNotifyOff", "0")$>
    <$endif$>
    With this code when the user is doing reject action from child workflow, it is taking us back to the main workflow and not to the previous step of child workflow.
    Is this approach correct?
    -Pratap

    1. The 3 events are Entry, Update, and Exit.
    2. Rejects happen in the Update area but you can not reliably react to it there because upon reject it immediately leaves (not going through the exit event).
    3. The rejected content goes backwards in the Workflow step by step (even going back to the main workflow from a sub workflow) until it finds a Step that has valid Editors (not just reviewers).
    4. If it does not find an Editor step it goes all the way back to the automatic Contribution step at the beginning of the Workflow and sits there in a kind of no mans land until the contributor (or an admin) goes and approves it again.
    5. To check if something has been rejected the Entry Event of an editor Step BEFORE the step where it is rejected needs to have code to check for the Reject status.
    The sub workflow should be able to capture the Reject as you desire. Are all of the steps in the child workflow (sub workflow) Review only steps? Or maybe the people in the steps do not have RW access to the document? This is what I would predict with your described symptoms.

  • Install of latest Firefox upgrade won't complete, now having multiple problems and can't find how to revert back to previous mode.

    I got a prompt to upgrade, but the install mechanism just keeps looping, says connecting but nothing ever happens. Daily I get warnings to install, and each effort ends as above. Now some of the prompt boxes (such as "are you sure you want to delete...") appear in subdued/basic mode. I was going to simply revert back to the previous edition that worked, but can't find how to do that.

    I am having an issue with the Software Update also. The window says, "It is strongly recommended that you apply this update for Firefox as soon as possible"....It won't let me see the information of this update. I click on it as it highlights but nothing happens. So when I do click next it starts to update but updates all day long. It is not right. I thought maybe a virus? Could somebody tell me what to do? It is constantly happening everyday. thank You!!

  • Apple you wrecked Final Cut X- How to go back to previous version?

    Dear Apple Final Cut Developers,
    This latest version of Final Cut X 10.1.1 is a disaster.  It is riddled with bugs, it crashes, and is slow.  It is not ready for production. 
    Let me start by saying that I loved this product and we have cut over 25 half hour weekly television shows with it.  After coming back from the holidays I was horrified to find out that my systems had automatically upgraded and that you had completely revamped the file system to libraries.  Not a good move in a production enviroment.  But worst is that this upgrade is riddled with bugs.  I am constantly having to wait on the system before I can start scrubbing, the audio gets out of sync, and every time I have to go back to a previous show for a clip on another drive I have to wait 5 minutes for the system to load tons of media that I don't need.  This kind of buggy product just doesn't work in a production enviroment!!!
    Please tell me how I can go back and load the previous version to use until you can get this fixed??
    Note that I am editing on a maxed out iMac with 32GB of RAM and the 3.2GHX Core i5 with the latest operating system.  This system used to be very fast and editing was a pleasure till you wrecked it.

    Sorry to hear this. What have you tried in the way of troubleshooting? Have you tried running from a new user account ?
    This really isn't the best place to reach out to Apple. It's a user-to-user forum. A very long shot, but you could contact an Apple retail store and possibly they'll be able to help…but that assumes you didn't update your project and events if you need to work on any of those shows.
    For some time, contributors here and other FCP forums have reminded people to follow Apple's best updating practices and archive the pre-update version of the app as well as their projects and events. Absent those archives, there is also the possibility of doing a restore from Time Machine (or some other BU utility), if used.
    Best of luck.
    Russ

  • HT4946 How to go back to previous version of iPad

    I got a notice this week to up,date this changed my iPad to something that I really don't like how do I go back to precious version?

    Hi
    Thanks for your reply , the darn thing is that when I type it auto fills in the wrong language and I am set up for French and fills in anything but French when I type

  • Mavericks: Install failed. How to revert back to previous OS X?

    Hi
    I was running Lion on MBA. I downloaded Mavericks today and the install has failed. It says I have a disk error.
    I have tried 'repair disk' and no joy.
    The issue I have is that my MBA keeps trying to install Mavericks.
    How do I get back to where I was before?
    I assume my MBA will have to go into the Apple store to have the disk looked at. I've checked and it isn't part of the exchange program.
    Many thanks guys.

    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears.
    You have the option to repair drive and to re-install OS X.
    I would try repair drive and repair permissions first.
    If the internal drive fails to work, you can attach an external drive and create a partition the size of your internal drive. Format as GUID.
    Install OS X on this partition. While booted from the new partition, you can try recovering your data from the internal drive, Time Machine or clone backup.
    Once you have recovered your data, use Disk Utility to Erase the internal drive then clone your new partition back to the internal drive.
    I like SuperDuper for cloning.
    Download SuperDuper! —  http://www.shirt-pocket.com/

  • How to revert back to previous version of Internet Explorer (Windows 7)

    Hi,
    I recently ran updates on my computer and IE 7 was taken up to IE 9. I had CCTV plugins that dont work with IE 9 (I find out too late) so now I want to revert to IE 7 or IE 8. No download that I can find for either IE 7 or IE 8 will run on Windows 7. Both
    throw up a library error. Can anyone suggest a solution please. My Windows 7 Ultimate had IE 7 intalled from the box - so it will obviously run. I can remove IE 9 for the Control Panel - but that is about it. I don't belive that the only option would be to
    completely reinstall Windows to slove the issue - and would it even activate a second time?

    IE9 IS the problem.  We have three DVR camera systems which cannot be accessed through IE9.  The DVR manufacturer admits the problem!
    So explain exactly what it is about IE9 that makes it unable to access the DVR camera systems?
    Provide detail of exactly why IE9 is the problem.
    Looks like you are really a newbie about using browsers who is just learning how to use IE.Its weird that you are expecting Batteryjer will be knowing the exact root cause problem. FYI I've the same issue but in different context.
    I'm using Pega PRPC  which was working fine with Internet Explorer 7 and 8. But with the latest update of Internet Explorer 11 (which happened automatically without my knowledge), I'm not able to use this pega software properly as many menu items doesn't
    show up.When I play around with F12 Developer Tools (located in Tools) and change the Interent Explorer version from 11 to  8, 7, most of the menu options of Pega appears correctly in browser screen. If you really want to know the exact cause , go back
    to your computer and try to play and learn..
    I can say that IE is becoming more carp and crap with every update and there is PROBLEM WITH INTERNET EXPLORER with every update.Still I want to rollback my IE from 11 to 8 without using Developer Tool.

  • Random crashes after upgrade; how to switch back to previous version Firefox

    First of all Firefox upgraded itself without asking, even though I did not give any approval or command to go ahead. Since my HW is a bit older, I do not want to go for any SW upgrades of my infrastructure SW, except essential tools for my work. 99% of time upgraded SW will need/ use up more resources and slow down the performance while providing "NEW" features or enhancements which I may not even want unless I upgrade my HW. Now I am prone to more crashes when I have scores of tabs in 3 or 4 windows, which is normal for my concurrent processing mind; as often my searches result in things that I cannot finish reading/followup in a day. Although I do bookmark a lot too, but one has to remember to do it; whereas a Tab is open there to REMIND me to read or followup.
    Secondly, Then there is no easily visible way or button to switch back to the "previous" version of Firefox; i.e. to undo the Upgrade. Very disappointing and frustrating !! What happened to customer-oriented thinking ?
    Adobe behaves better, I have been saying NO to its upgrade question a zillion times, without unchecking "Remind Later" box. And it did not upgrade automatically in last 2 yrs. Only when I pressed ENTER with its button in focus, did it go ahead and upgrade itself (even that was unwittingly done, but at least it WAS my action).
    S. Jalali

    Go to Tools>Advanced>Firefox updates - and check as you wish for the future.
    Going back to an earlier version is never a good idea for security reasons.

  • I hate version 4, tell me how to get back to previous version of Firefox or I'm going to IE !!!

    Version 4 is awful, I hate it and will NOT use it.

    Firefox is highly customizable and you may be able to customize it to meet your needs.
    If you do not like the new UI, you can make Firefox 4 look and behave more like Firefox 3.6, for details see http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • How to get back the previous command?

    Can I re-enter the previous commands using things like up arrow? Is the command history kept in SQL*Plus?
    Jirong

    Please review the documentation.
    http://download-west.oracle.com/docs/cd/B14117_01/server.101/b12170/toc.htm

  • How can I back my previous software version on my macbook

    I do have many problems in OSX even my mail box ,connectivity, openning a folder these are all not working well in OSX 

    you can't and its not recommended. once you update to the most current version there is no going back. the only place that could roll it back is nokia care but they will only do it for a GOOD reason not just because you want to roll it back.
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Maybe you are looking for