How to increase the memory for my weblogic server in Jdeveloper 12.1.2.0.0 ?

Hey everyone,
So as my title says, i'm trying to increase the memory for my weblogic server in my windows 7 64 bit machine, with 8GB ram.
The values appear to be: JAVA Memory arguments: -Xms256m -Xmx512m -XX:PermSize=128m -XX:MaxPermSize=512m
I've done some search from this forum and i've added this to my jdev.conf:
AddVMOption -XX:MaxPermSize=1536M (in this one i've only changed the value)
AddVMOption -Xmx1536M
AddVMOption -Xms1536M
And i've changed this: MEM_ARGS="-Xms1024m -Xmx1024m" in my startNodeManager.sh file
I'm still getting the same line in my server but i need to change the values since i'm not getting the server to run my application very well (it gets stucked in loading my databases and graphs) and i think it will continue untill i get a heap exception error.
Any ideas of how to change this?
Regards,
Frederico.

Thanks Alejandro .
I'm going to ask you another question and this one is quite important.
Whenever i run my project a couple of times, i'm not able to retrieve the page, it just gets stuck on loading.
It just stops the loading, like its a really really slow page. I'm not using a lot of rows in my database so i don't take to much memory but it doesn't load and i know everything is fine but i just added some graphs after testing it.
Do you know why?
In the console it says that everything is fine and shows the link for the page but it never loads completely until it gives a error because it does not respond in 600 seconds.
Strange right?

Similar Messages

How to increase the time for detect a device down on Prime 2.0

Hi,
I would like to know how to increase the time for detect when a device has lost connection, currently I monitor several stand alone Access Points that are paleced on differents locations connected to prime through 256 Mbps Links, so when the location has very high bandwith utilization, an e-mail notification about the unreachable Access Point is sent, but if we check te reachability, the Access Point is reachable, and we don´t want to receive to many of this notificatios,
thanks for your help

Go to the Console, Select the server --> configuration --> tuning tab,
Stuck Thread Max Time and Stuck Thread Timer Interval (give your required time)
This will definitely increase the Stuck Thread time interval.
or
by using work manager also you can define Stuck Thread Max Time interval by editing deployment descriptor file
<work-manager>
<name>wm_name</name>
<max-stuck-thread-time>30</max-stuck-thread-time>
<stuck-thread-count>5</stuck-thread-count>
</work-manager>

How to delete the deployed composite in weblogic server 11g

Can someone tell me how to delete the deployed composite in weblogic server 11g ?I'm facing an issue where the weblogic server is getting started and immediately after sometime the server changes to "Force shutdown"..When i checked the logs,there is an error in one of the composite i deployed..So now i wanted to delete the deployed composite?Please help ....
Thanks

Hi
1. Deleting a domain will not hold any references. But make sure that under your user_projects/applications also remove the folder that matches with your domain. Basically under user_projects folder you will see 2 folders named applications and domains. When you create a domain say mySoaDomain, it will crate a folder with the same name under applications folder also with few files like em.ear. If you do this, then you can crate a new soa domain and use the same old name.
2. NOW comes the most important thing. If you create a new SOADomain, at one point, you had to give details for soainfra and mds schemas. If you give your current existing db details (that was used for your old deleted domain), then you may still have the issues. Because the soainfra db may still have the instances for your old process.
3. If you really want to have a full clean soa domain, here is what you do:
a) Run rcu and drop the existing schemas for soainfra and mds.
b) Run rcu again and create above schemas again.
c) Now create SOADomain using config wizard and refer above clean rcu db and you are all set.
3. Under your domain root folder, just searh for files named with your workflow and you should see the .jar location.
Thanks
Ravi Jegga

How to increase the time for threadstuck jdeveloper weblogic server

Hi,
This is a requirement for increasing the time for threastuck detection in jdeveloper weblogic server.
Few of my threads take a longer time than the default value for threastuck detection.
Could you please share the suggestions on how to do it?
i have tried by creating workmanager from the administration console but not aware of how to apply it to application(in web.xml).
Share inputs on this.
Thanks,
Devender

You are posting this on the wrong forum. All this in one of the server forums.
Timo

How to increase the memory of oracle

Hi,
I am having oracle database version 11.0.1.6 on windows server 2003 R2.
My Server Ram size is 12 GB.
select * from V$SGAINFO;
Fixed SGA Size     1335136     No
Redo Buffers     12529664     No
Buffer Cache Size     1073741824     Yes
Shared Pool Size     176160768     Yes
Large Pool Size     8388608     Yes
Java Pool Size     16777216     Yes
Streams Pool Size     8388608     Yes
Shared IO Pool Size     0     Yes
Granule Size     8388608     No
Maximum SGA Size     1297321984     No
Startup overhead in Shared Pool     58720256     No
Free SGA Memory Available     0
I want to increase my memory for oracle because i need to insert 31 billion rows into a table with nologging. I am inserting them chunk by chunk and commit after each chunk. But it is taking 62 hours to insert the rows. So i think if i increase the memory i could reduce the time to insert the rows.
I really am not sure whether i am thinking in the right way. Please advise. If i want to increase the memory please let me know how to increase it.
Thanks in advance

Are all columns in the WHERE clause indexed?
Are statistics current & accurate for all tables & indexes?
post EXPLAIN PLAN for SQL below
PROCEDURE Pro_unpvt_usm_dr
IS
BEGIN
    FOR k IN (SELECT DISTINCT pr_id
              FROM   unpvt_im_dr_e0322) LOOP
        INSERT /*+ append */ INTO unpvt_usm_dr_e0322
        SELECT pr_id,
               nr,
               col,
               Corr(n, m) val
        FROM   (SELECT a.pr_id,
                       a.nr,
                       b.nr col,
                       a.n,
                       b.val m
                FROM   unpvt_usm_drpre1_e0322 a,
                       unpvt_im_dr_e0322 b
                WHERE a.pr_id = k.pr_id
                       AND b.pr_id = k.pr_id
                       AND a.col = b.col)
        GROUP BY pr_id,
                  nr,
                  col;
        COMMIT;
    END LOOP;
    dbms_output.Put_line('POPULATED UNPVT_USM_DR_E0322');
END pro_unpvt_usm_dr;

How to increase JVM memory for Web Logic 10.3.3 - OSB 11g

Hello folks,
I am running OSB 11g on WebLogic 10.3.3 to call some services passing large XMLs requests. These XMLs are something around 10mb each. Unfortunately, I got errors regarding memory.
I am using Eclipse with OSB plugin to develop, and I have configured the weblogic server to start up it from the eclipse, thus I don't need to start up through command line.
I would like to know where I can change the memory arguments to start up the JVM which runs the WebLogic server. As I am starting up the server from eclipse, I can't change the memory size args from command line.
Is there a file where those arguments are stored? or some configuration on WebLogic console which I can increase the Xms and Xmx ?
The JVM is jrockit_160_17_R28.0.0-679
This is the eclipse console output when the server is starting up:
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=C:\Davi\osb\mw_1033\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;;C:\Davi\osb\mw_1033\OSB_OR~1\modules\features\osb.server.modules_11.1.1.3.jar;C:\Davi\osb\mw_1033\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Davi\osb\mw_1033\patch_oepe1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Davi\osb\mw_1033\JROCKI~1.0-6\lib\tools.jar;C:\Davi\osb\mw_1033\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Davi\osb\mw_1033\WLSERV~1.3\server\lib\weblogic.jar;C:\Davi\osb\mw_1033\modules\features\weblogic.server.modules_10.3.3.0.jar;C:\Davi\osb\mw_1033\WLSERV~1.3\server\lib\webservices.jar;C:\Davi\osb\mw_1033\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Davi\osb\mw_1033\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Davi\osb\mw_1033\osb_ora11g\soa\modules\oracle.soa.common.adapters_11.1.1\oracle.soa.common.adapters.jar;C:\Davi\osb\mw_1033\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Davi\osb\mw_1033\OSB_OR~1\lib\version.jar;C:\Davi\osb\mw_1033\OSB_OR~1\lib\alsb.jar;C:\Davi\osb\mw_1033\OSB_OR~1\3rdparty\lib\j2ssh-ant.jar;C:\Davi\osb\mw_1033\OSB_OR~1\3rdparty\lib\j2ssh-common.jar;C:\Davi\osb\mw_1033\OSB_OR~1\3rdparty\lib\j2ssh-core.jar;C:\Davi\osb\mw_1033\OSB_OR~1\3rdparty\lib\j2ssh-dameon.jar;C:\Davi\osb\mw_1033\OSB_OR~1\3rdparty\classes;C:\Davi\osb\mw_1033\OSB_OR~1\lib\external\log4j_1.2.8.jar;C:\Davi\osb\domains\INFOLE~1\config\osb;C:\Davi\osb\mw_1033\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\Davi\osb\mw_1033\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Davi\osb\mw_1033\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Davi\osb\mw_1033\patch_wls1033\profiles\default\native;C:\Davi\osb\mw_1033\patch_oepe1033\profiles\default\native;C:\Davi\osb\mw_1033\WLSERV~1.3\server\native\win\32;C:\Davi\osb\mw_1033\WLSERV~1.3\server\bin;C:\Davi\osb\mw_1033\modules\ORGAPA~1.1\bin;C:\Davi\osb\mw_1033\JROCKI~1.0-6\jre\bin;C:\Davi\osb\mw_1033\JROCKI~1.0-6\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft Application Virtualization Client;C:\Program Files\Attachmate\Reflection\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Davi\osb\mw_1033\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2123-windows-ia32, compiled mode)
Starting WLS with line:
C:\Davi\osb\mw_1033\JROCKI~1.0-6\bin\java -jrockit -Xms256m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Davi\osb\mw_1033\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Davi\osb\mw_1033\WLSERV~1.3 -Dwls.home=C:\Davi\osb\mw_1033\WLSERV~1.3\server -Dweblogic.home=C:\Davi\osb\mw_1033\WLSERV~1.3\server -Ddomain.home=C:\Davi\osb\domains\INFOLE~1 -Dcommon.components.home=C:\Davi\osb\mw_1033\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Davi\osb\mw_1033\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Davi\osb\domains\INFOLE~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Davi\osb\domains\INFOLE~1\config\FMWCON~1\servers\AdminServer -Doracle.security.jps.config=C:\Davi\osb\domains\INFOLE~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Davi\osb\domains\INFOLE~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Davi\osb\domains\INFOLE~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Davi\osb\mw_1033\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Davi\osb\mw_1033\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Davi\osb\mw_1033\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Davi\osb\mw_1033\patch_oepe1033\profiles\default\sysext_manifest_classpath weblogic.Server
Thanks in advance,
Davinod
Edited by: user13631313 on Jan 10, 2011 10:07 AM

Hi Davinod,
Yes, the correct place is to change the memory arguments in the "setDomainEnv.cmd", however can you confirm if the changed memory arguments were reflected in the logs or not.
If yes then you need to try to increase the memory arguments again and test which is the best working memory argument suitable for your environment, this would take some trials.
However if the memory arguments are still not reflected then try to set it properly as shown below:
set MEM_ARGS=-Xms1024m -Xmx1024m
Regards,
Ravish Mody
http://middlewaremagic.com/weblogic/
Come, Join Us and Experience The Magic…

How to Increase the memory size of a File in the Application Server

Hello Abaper's
I have generated a XML file for the data of internal table (with 10 Records). When i download , i can see the XML file for the Entire 10 Records.
But , while transferring the XML file to Applicationserver , it's transferring only upto max 4 Records.I     assume that the memory is insufficient to allocate 10 Records. Can we Increase the Memory size of the File on Application server. OR, is there any error in My Source Code.
Code i used to Transfer the XML File to Application server.
OPEN DATASET FNAME FOR OUTPUT IN BINARY MODE.
IF sy-subrc EQ 0.
   LOOP AT it_xmltab INTO wa_xmltab.
       TRANSFER wa_xmltab TO FNAME.
   ENDLOOP.
ELSE.
MESSAGE e004(zmsg5) WITH 'File FNAME not opened'.
ENDIF.
CLOSE DATASET FNAME.
Regards
Jv

Hi,
DATA : filename TYPE rlgrap-filename.
DATA : doc_name TYPE char30.
DATA : bin_size TYPE i.
SELECT matnr matkl meins
       FROM mara INTO TABLE it_mara
       UP TO 10 ROWS.
CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
EXPORTING
    i_filename           = filename
    i_xml_doc_name       = doc_name
IMPORTING
    pe_bin_filesize      = bin_size
TABLES
    i_tab_sap_data       = it_mara         " contains 10 Records
CHANGING
    i_tab_converted_data = it_xmltab.
placing XML File in Appl. Server
DATA : FNAME(60) VALUE 'xyz_File'.
DATA : num TYPE i.
DATA : xmldata(256) TYPE x.
For Writing The data in Application Server
OPEN DATASET FNAME FOR OUTPUT IN BINARY MODE. " ENCODING DEFAULT.
IF sy-subrc EQ 0.
LOOP AT it_xmltab INTO wa_xmltab.
    TRANSFER wa_xmltab TO FNAME.
ENDLOOP.
ELSE.
MESSAGE e004(zmsg5) WITH 'File FNAME not opened'.
ENDIF.
CLOSE DATASET FNAME.
For Reading The data in Application Server
OPEN DATASET FNAME FOR INPUT IN BINARY MODE. " ENCODING DEFAULT.
DO.
IF sy-subrc EQ 0.
    READ DATASET fname INTO xmldata.
    WRITE :/ xmldata.
    Clear xmldata.
ELSE.
    EXIT.
ENDIF.
ENDDO.
CLOSE DATASET FNAME.
at runtime i can see
it_mara --> contain 10 records
it_xmltab --> contain 7 lines (Each line size is 255 char). This table have XML format data, (unknow format , with all numeric
                    digits)
it_xmltab is trasferred to application server , but the xml format is generated upto 4 records, and for the remaining records
the XML format is not generated.
the XML data in application server file is
<?xml version="1.0"?><TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY1</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">PC
</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY2</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">
PC </MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000001</MATNR><MEINS Datatype="C" Length="6">EA</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000002</MATNR
Regards
JV

How to increase the memory in Event Server

I have this folowing error in the windows event observer (in french). The memory Event Server memory seems to be to small. (English message traduction : Insufficient memory in the Event Server"" ).
How can i increase this memory ? The physical server is dedicated to Crystal server.
Type de l'événement : Erreur
Source de l'événement : BusinessObjects_EventServer
Catégorie de l'événement : EventServer
ID de l'événement : 35750
Date : 13/10/2010
Heure : 09:56:51
Utilisateur : N/A
Ordinateur : SERVHLM3
Description :
Mémoire insuffisante dans l'Event Server
I have this folowing error in same time... that talk about maximum limit Windows offices reach
(English message traduction : "Attempt to allocate Windows 40 offices, only 19 have been allocated. It may be that the system has reached its maximum limit." ).
Do you know how this can happen ? And how to correct this ?
Type de l'événement : Erreur
Source de l'événement : BusinessObjects_crproc
Catégorie de l'événement : Général
ID de l'événement : 49301
Date : 13/10/2010
Heure : 09:56:54
Utilisateur : N/A
Ordinateur : SERVHLM3
Description :
Tentative d'allocation de 40 bureaux Windows, seulement 19 ont été alloués. Il se peut que le système ait atteint sa limite maximum. Contactez votre administrateur système.

As Ankur said, there are not parameters for this setting.
Probably what you can do is, you can add this server to a defined server group.
Generally you can assign additional resources to a server group. That could probably help you to increase performance.
Regards
Gowtham

How to optimize the memory for a large labview array?

I am running LabView on Windows XP with 4 Gb of RAM. The array is 51X256X256 complex numbers, but I want 300x256x256. The program runs out of memory when I use more than 51-53 arrays of 256X256. I do not know how to use the in place element structure to modify the vi below. The unbundled/ bundle structures do not present symmetry. Anyone can help me with this? Thanks!
Mariana
Attachments:
array3Dc.JPG ‏22 KB
array3Dc_front.JPG ‏58 KB

Norbert,
The full data3Dc array takes about 15.5 MB and the data3Dc comp.vi takes 31 MB. The empty data3Dc comp.vi array takes only 18.2 kB. This array is a variable that modifies at each scanned wavelength. I have a scanning wavelengths software package. For one wavelength I record a hologram followed by the reconstruction of the object field (1x256x256). 3D optical fields are added all together to create a big 3D optical field (Nx256x256). The code data3Dc comp_1.vi is not the only one in the memory. This VI is a subvi for other codes. A few other examples are FFT, IFFT, filtering, phase matching, cross-section, calibration….I did not care about memory optimization until now. So, I want to scan more than 50 wavelengths. By now (N=50) I have to restart the LabView after each scanning, do the reconstruction of the fields, start the LabView again to see the results. I think the problem is caused by this VI that is a subvi for other codes. I already extended the memory to 3GB in boot.ini, but the thing is that I want also a small scanning time. It doesn’t work. Extending the memory to 3GB makes the OS slower than before. My question is how to modify this array (data3Dc) or the VI (data3Dc comp.vi) to access lesser memory. I have tried to attach the full VI but it tells me that it is too big. I attached the empty one.
Thanks,
Mariana
Attachments:
data3Dc comp.vi ‏19 KB

How i configure the log4j.xml in weblogic server

hi
i write a new lg4j.xml and i put this in WEB-INF/classes,i deployed this jar in my remote server,but it not reflected. [i am not specify the server logs, we have some API's which is deployed in server for that API log files is configured using log4j.xml ]
i saw there is a option in weblogic - setDomain -LOG4J_CONFIG_FILE='here we give the path for log4j.xml'.I think it's only work for local machines not for the remote machines.
i don't know how to get a log files in weblogic server

To use Quartz primarily within an application server environment,include the Quartz JAR within the enterprise application (.ear or .war file). However, if you want to make Quartz available to many applications then simply make sure it's on the classpath of your appserver.
You can also deploy it as a jar file or a library module as required.
Quartz depends on a number of third-party libraries (in the form of jars) which are included in the distribution .zip file in the 'lib' directory. To use all the features of Quartz, all of these jars must also exist on your classpath.
-Sandeep

How to terminate the "process" running in weblogic server by servlet

hi all !!
i have executed a external command from servlet but i am not getting the output untill i logoff the weblogic server.
now i want to kill the process running in my server by servlet code.how could i do this? here is my code ,it is executing the command but not giving output untill i logoff the server.
                 Runtime rt = Runtime.getRuntime();
                 Process proc = rt.exec("var.bat");
                 proc.wait(60);
                 proc.destroy();Thanks and Regards
Allwyn

hey !
anybody is here?????

How to set the CLASSPATH for an Sql Server 2005 database... help me please

Hello! Guys I want to access a Sql Server 2005 database from Java.I've downloaded the JDBC 2.0 driver from Microsoft.I've copied the sqljdbc4.jar file to C:\Java\jdk1.6.0_14\db\lib.And I've added this to the classpath C:\Java\jdk1.6.0_14\db\lib\sqljdbc4.jar.The classpath variable is defined as a user variable.Well the point is that I get that nasty exception:Exception in thread "main" java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver.So if you know how to help me,please do so.Thank you :)

Hi Timo,
My jdev version is 10.1.3.3.0, this is for R12. By PR i mean to say process request and PFR process form request in the controller.
In the Process request of the controller, i am finding the checkbox bean and assigning the firepartialaction for it.
Later in the process form request for the fired event, i am trying to handle the rendered property of the messagetextinput. Is this a right approach?
my code below
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
OAMessageCheckBoxBean oamessagecheckboxbean = (OAMessageCheckBoxBean)oawebbean.findChildRecursive("X_FLAG");
if(oamessagecheckboxbean != null)
oapagecontext.writeDiagnostics(this, "Message check box Bean found:", 1);
FirePartialAction firepartialaction = new FirePartialAction("change");
oamessagecheckboxbean.setAttributeValue(PRIMARY_CLIENT_ACTION_ATTR, firepartialaction);
oamessagecheckboxbean.setFireActionForSubmit("change", null, null, true);
oapagecontext.writeDiagnostics(this, "setting fire event", 1);
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processFormRequest(oapagecontext, oawebbean);
oapagecontext.writeDiagnostics(this, "Inside Process Form Request", 1);
if("change".equals(oapagecontext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
OAMessageTextInputBean bean = (OAMessageTextInputBean)oawebbean.findChildRecursive("X_NUMBER");
if(bean!=null){
bean.setRendered(Boolean.TRUE);}
Thanks,
Malar

How to configure the batch job on weblogic server

I have created a standalone java application using quartz.i want to deploy the standalone program on weblogic so as it could be run as a batch job.
Can you please help me how could i deply the java application on the weblogic and run the same.

To use Quartz primarily within an application server environment,include the Quartz JAR within the enterprise application (.ear or .war file). However, if you want to make Quartz available to many applications then simply make sure it's on the classpath of your appserver.
You can also deploy it as a jar file or a library module as required.
Quartz depends on a number of third-party libraries (in the form of jars) which are included in the distribution .zip file in the 'lib' directory. To use all the features of Quartz, all of these jars must also exist on your classpath.
-Sandeep

HT4621 how to partition the memory for parallels

How do you do it?

Mu300Pilot wrote:
How do you do it?
You don't partition 'memory' you partition the hard drive! and you DO NOT partition anything for Parallels.
I strongly suggest that you read the Parallels documentation before you try to do anything, you are very confused.

I am using my first apple product, mac book pro. somehow i FIGURED OUT HOW TO INCREASE THE FONT FOR SEARCHES AND WEB PAGES, BUT THE FONT IS TOO BIG AND FOR THE LIFE OF ME I CAN NOT FIND WHERE TO GET THE SCREEN BACK TO NORMAL, HELP ANYONE?

I am new to Apple, somehow I figured out how to make font of Web pages bigger, but it is too big and I can't use sites properly. for the life of me I can not how to get my font size reduced. Help anyone? thank you, sbb

Probably command-minus will do the trick.

How to increase the memory for my weblogic server in Jdeveloper 12.1.2.0.0 ?

Similar Messages

Maybe you are looking for