How to load data using two maps for the same source file in Import Manager
Hi,
I am trying to load the source data to MDM using two map files, since one map is too big (creating memory error).
However the first map data able to see after loading (SAP data) but when loading second map(nonSAP data) using the remote key to match the previously loaded SAP key ,even if MDM is processing the data it is not reflecting in data manager.
Is there any reason for this.
Appreciate your suggestion and tips on this.
regrds,
Reo
Hi Reo,
As ur requirement seems,In the second pass perform recording matching by select default import action as "<b>update null fields only"</b> for those data records which are matching and "<b>create</b> " for those data records which are not matching with previous data records from SAP system.
If you define "update null fields only", then only the key of the new record from NON SAP will get appended to the existing record. And if you select "create" then it will create new records and will apply NON SAP key on it.
Please check the remote key values using data manager.Key is applied in the records or not.
Remember that import maps are client specific. Remote key comprises of both key and client system.So be sure that you are connecting to two different client systems.
I have tried this and this is working fine on my system.
Thanks,
Shiv Prashant Dixit
Thanks,
Similar Messages
-
Use two indicators for the same variable in two different VIs
hello, I want to use two indicators for the same variable in two different VIs running at the same time
should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated
I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
what should I do?
thank you in advance
cordialy
Attachments:
projet.zip 13 KBCrisSTine01 wrote:
hello, I want to use two indicators for the same variable in two different VIs running at the same time
I'm a huge fan of User Events to send updates to GUIs from who knows where.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Why is the Star Transformation using two indexes for the same dimension?
Hi,
Recently, I have made an investigation about the Star Transformation feature. I have found a strange test case, which plays an important role in my strategy for our overall DWH architecture. Here it is:
The Strategy:
I would like to have the classical Star Transformation approach (single column Bitmap Indexes for each dimension foreign key column in the fact table), together with additional Bitmap Join Indexes for some of the dimension attributes, which would benefit from the materialization of the join (bitmap merge operation will be skipped/optimized).
The query:
select dp.brand, ds. region_name, dc.region_name
, count(*), sum(f.extended_price)
from fact_line_item f
, dim_part dp
, dim_supplier ds
, dim_customer dc
where dp.mfgr = 10 -- dimension selectivity = 1/10 --> acttual/fact selectivity = 6/10
and f.part_dk = dp.dk
and ds.region_name = 'REGION #1' -- dimension selectivity = 1/9
and f.supplier_dk = ds.dk
and dc.region_name = 'REGION #1' -- dimension selectivity = 1/11
and f.customer_dk = dc.dk
group by dp.brand, ds. region_name, dc.region_name
The actual plan:
| Id | Operation | Name | Starts | E-Rows | Cost (%CPU)| A-Rows | A-Time | Buffers | Reads |
| 0 | SELECT STATEMENT | | 1 | | 3247 (100)| 1 |00:01:42.05 | 264K| 220K|
| 1 | HASH GROUP BY | | 1 | 2 | 3247 (1)| 1 |00:01:42.05 | 264K| 220K|
|* 2 | HASH JOIN | | 1 | 33242 | 3037 (1)| 217K|00:01:29.67 | 264K| 220K|
|* 3 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.01 | 316 | 4 |
|* 4 | HASH JOIN | | 1 | 33245 | 2934 (1)| 217K|00:01:29.10 | 264K| 220K|
|* 5 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.08 | 316 | 8 |
|* 6 | HASH JOIN | | 1 | 33248 | 2831 (1)| 217K|00:01:28.57 | 264K| 220K|
|* 7 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
| 8 | PARTITION RANGE ALL | | 1 | 36211 | 2827 (1)| 217K|00:01:28.01 | 264K| 220K|
| 9 | TABLE ACCESS BY LOCAL INDEX ROWID| FACT_LINE_ITEM | 6 | 36211 | 2827 (1)| 217K|00:01:33.85 | 264K| 220K|
| 10 | BITMAP CONVERSION TO ROWIDS | | 6 | | | 217K|00:00:07.09 | 46980 | 3292 |
| 11 | BITMAP AND | | 6 | | | 69 |00:00:08.33 | 46980 | 3292 |
| 12 | BITMAP MERGE | | 6 | | | 193 |00:00:02.09 | 2408 | 1795 |
| 13 | BITMAP KEY ITERATION | | 6 | | | 4330 |00:00:04.66 | 2408 | 1795 |
| 14 | BUFFER SORT | | 6 | | | 60 |00:00:00.01 | 6 | 0 |
|* 15 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
|* 16 | BITMAP INDEX RANGE SCAN | FACT_LI__P_PART_DIM_KEY_BIX | 60 | | | 4330 |00:00:02.11 | 2402 | 1795 |
|* 17 | BITMAP INDEX SINGLE VALUE | FACT_LI__P_PART_MFGR_BJX | 6 | | | 1747 |00:00:06.65 | 890 | 888 |
| 18 | BITMAP MERGE | | 6 | | | 169 |00:00:02.78 | 16695 | 237 |
| 19 | BITMAP KEY ITERATION | | 6 | | | 5460 |00:00:01.56 | 16695 | 237 |
| 20 | BUFFER SORT | | 6 | | | 5460 |00:00:00.02 | 316 | 0 |
|* 21 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.01 | 316 | 0 |
|* 22 | BITMAP INDEX RANGE SCAN | FACT_LI__P_CUST_DIM_KEY_BIX | 5460 | | | 5460 |00:00:02.07 | 16379 | 237 |
| 23 | BITMAP MERGE | | 6 | | | 170 |00:00:03.65 | 26987 | 372 |
| 24 | BITMAP KEY ITERATION | | 6 | | | 6672 |00:00:02.23 | 26987 | 372 |
| 25 | BUFFER SORT | | 6 | | | 6672 |00:00:00.01 | 316 | 0 |
|* 26 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.01 | 316 | 0 |
|* 27 | BITMAP INDEX RANGE SCAN | FACT_LI__S_SUPP_DIM_KEY_BIX | 6672 | | | 6672 |00:00:02.74 | 26671 | 372 |
The Question:
Why is the Star Transformation using both indexes FACT_LI__P_PART_DIM_KEY_BIX and FACT_LI__P_PART_MFGR_BJX for the same dimension criteria (dp.mfgr = 10)?? The introduction of the additional Bitmap Join Index actually make Oracle to do the work twice !!!
Anybody, any idea ?!?Dom, here it is the plan with the predicates:
| Id | Operation | Name | Starts | E-Rows | Cost (%CPU)| A-Rows | A-Time | Buffers | Reads |
| 0 | SELECT STATEMENT | | 1 | | 3638 (100)| 1 |00:06:41.17 | 445K| 236K|
| 1 | HASH GROUP BY | | 1 | 2 | 3638 (1)| 1 |00:06:41.17 | 445K| 236K|
|* 2 | HASH JOIN | | 1 | 33242 | 3429 (1)| 217K|00:08:18.02 | 445K| 236K|
|* 3 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.03 | 319 | 313 |
|* 4 | HASH JOIN | | 1 | 33245 | 3326 (1)| 217K|00:08:17.47 | 445K| 236K|
|* 5 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.01 | 319 | 313 |
|* 6 | HASH JOIN | | 1 | 33248 | 3223 (1)| 217K|00:08:16.63 | 445K| 236K|
|* 7 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
| 8 | PARTITION RANGE ALL | | 1 | 36211 | 3219 (1)| 217K|00:08:16.30 | 445K| 236K|
| 9 | TABLE ACCESS BY LOCAL INDEX ROWID| FACT_LINE_ITEM | 6 | 36211 | 3219 (1)| 217K|00:08:40.89 | 445K| 236K|
| 10 | BITMAP CONVERSION TO ROWIDS | | 6 | | | 217K|00:00:32.00 | 46919 | 19331 |
| 11 | BITMAP AND | | 6 | | | 69 |00:00:34.50 | 46919 | 19331 |
| 12 | BITMAP MERGE | | 6 | | | 193 |00:00:00.58 | 2353 | 1 |
| 13 | BITMAP KEY ITERATION | | 6 | | | 4330 |00:00:00.10 | 2353 | 1 |
| 14 | BUFFER SORT | | 6 | | | 60 |00:00:00.01 | 6 | 0 |
|* 15 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
|* 16 | BITMAP INDEX RANGE SCAN | FACT_LI__P_PART_DIM_KEY_BIX | 60 | | | 4330 |00:00:00.07 | 2347 | 1 |
|* 17 | BITMAP INDEX SINGLE VALUE | FACT_LI__P_PART_MFGR_BJX | 6 | | | 1747 |00:01:23.64 | 882 | 565 |
| 18 | BITMAP MERGE | | 6 | | | 169 |00:00:09.14 | 16697 | 7628 |
| 19 | BITMAP KEY ITERATION | | 6 | | | 5460 |00:00:02.19 | 16697 | 7628 |
| 20 | BUFFER SORT | | 6 | | | 5460 |00:00:00.01 | 316 | 0 |
|* 21 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.01 | 316 | 0 |
|* 22 | BITMAP INDEX RANGE SCAN | FACT_LI__P_CUST_DIM_KEY_BIX | 5460 | | | 5460 |00:00:08.78 | 16381 | 7628 |
| 23 | BITMAP MERGE | | 6 | | | 170 |00:00:21.46 | 26987 | 11137 |
| 24 | BITMAP KEY ITERATION | | 6 | | | 6672 |00:00:10.29 | 26987 | 11137 |
| 25 | BUFFER SORT | | 6 | | | 6672 |00:00:00.01 | 316 | 0 |
|* 26 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.01 | 316 | 0 |
|* 27 | BITMAP INDEX RANGE SCAN | FACT_LI__S_SUPP_DIM_KEY_BIX | 6672 | | | 6672 |00:00:20.94 | 26671 | 11137 |
Predicate Information (identified by operation id):
2 - access("F"."SUPPLIER_DK"="DS"."DK")
3 - filter("DS"."REGION_NAME"='REGION #1')
4 - access("F"."CUSTOMER_DK"="DC"."DK")
5 - filter("DC"."REGION_NAME"='REGION #1')
6 - access("F"."PART_DK"="DP"."DK")
7 - filter("DP"."MFGR"=10)
15 - filter("DP"."MFGR"=10)
16 - access("F"."PART_DK"="DP"."DK")
17 - access("F"."SYS_NC00017$"=10)
21 - filter("DC"."REGION_NAME"='REGION #1')
22 - access("F"."CUSTOMER_DK"="DC"."DK")
26 - filter("DS"."REGION_NAME"='REGION #1')
27 - access("F"."SUPPLIER_DK"="DS"."DK")
Note
- star transformation used for this statement -
How to load data to fact table for the year 2008 without modifying session sql
Hi,
I need to load data to OOTB Financial-General ledger related fact tables using new DAC execution plan for the year 2008 (just for the year 2008 not before or after). without modifying OOTB informataica session SQL. do you know how to do it?
appreciate you for your help. thank you.Do you know why you are going for new Execution plan instead of using existing?
let me know this will share what I know
thanks for checking
PS: JV its you!!
Message was edited by: SriniVEERAVALLI -
How does iTunes Genius handle two libraries for the same user?
I've been reading lately about how iTunes Genius should work. To my understanding, one of its basic principles, is absorbing usage data from users in order to create a database consisting of as much information possible. I don't expect a detailed explanation about the algorithms here. I know Apple doesn't share that kind of information (for obvious reasons) and I doubt I'd be able to understand much of it anyway. What I would like to know, though, in general terms, is how does this mechanism handle an instance like mine, where I use my Apple ID on two computers - one at home, another at work. That way, I have all my songs on both computers, so I can listen to them in either location. Obviously, each such library produces different usage data.
Thanks in advance for any information, as I'm quite curious about it.Dear Fateh,
Thanks for the reply.
The features of this plugin are:
Configurable timeout actions including alert, redirect, and logout
Optional and configurable warning message
Option to keep session alive if user isn’t truly idle. Special thanks to Martin D’Souza for a great idea on how to implement this feature.
But it cannot stop a new session for a user, if there is an active (in my definition apex_workspace_activity_log.seconds_ago<240) session already running for that user.
Regards,
Deepika. -
Using two routers for the same SSID
So here's my story. I have a standard Actiontec router in my basment, connected straight to the coax outlet, and connected by LAN Ethernet to a crappy computer nobody uses. It gives off a WPA2 wifi network, let's call it MyNetwork. For the longest time it's been the only router in the house. The coax outlet is on a splitter, splitting the coax outlet into one wire that goes to the Actiontec modem/router and the other to my TV STB. Recently we installed a new coax outlet on the other side of my house and next to it we have a brand new desktop computer that we use often. It has no wifi so and we can't run an ethernet cable throughout the entire house so we got a new Actiontec modem/router from our neighbor who just moved out. It's the exact same Actiontec device.
What we want to do is make it so that both routers give off signal on the same MyNetwork we have to make it a wider reaching signal, and so that I can connect the new desktop computer to the new router with an ethernet cable. I've read so many guides and they're all so confusing and it's such a mess that I almost completely screwed over my network. it seems like the two routers are completely independent of one another, not even aware of the others' existence. The new router is definitely in range of the old one. I've logged into 192.168.1.1 on the new computer and the new router seems to think it IS the old router (or so I think). It showed me all the same devices that have connected to MyNetwork and such, but then again it's always hard to be certain exactly which device is which. After messing around I must have changed some IP address or something, but it seems that 192.168.1.1 doesn't take me to the Verizon login screen, but 192.168.2.1 does. Can I reset those IP addresses?
And of course, can somone please provide a clean, easy to follow course of action as to how to set up two routers on one network?maxbirch wrote:
... I have a standard Actiontec router in my basement ... connected by LAN Ethernet to a computer ... It gives off a WPA2 wifi network, let's call it MyNetwork ... The coax outlet is on a splitter ... one wire that goes to the Actiontec ... other to my TV STB ...
... installed a new coax outlet on the other side of my house ...
... What we want to do is make it so that both routers give off signal on the same MyNetwork we have to make it a wider reaching signal, and so that I can connect the new desktop computer to the new router with an ethernet cable ...
... can somone please provide a clean, easy to follow course of action ... ?
I suspect it might be a good idea to step back reconsider your ultimate layout. Essentially you now have two (or if the STB is also included, three) coax drops connected to the ONT. It seems that you desire that one of these service the STB, and the other two each service a desktop and a wireless access point. If this is the case, continue reading.
There is no need to consider the original Actiontec router as the primary router, wireless or otherwise. Use the new coax location to connect to the primary Actiontec router (you can use either router). For starters, reset both routers to their factory defaults using the reset switch on the back of each device (for details, do a search).
Once the primary router has been located (or relocated) to the new coax drop, just connect the new desktop there using an Ethernet cable connected to one of the LAN ports on the back of the router. Then set up your primary wireless network based on this router (once again, do a search on these forums for specifics on setting up a basic wireless home network).
Now use the original coax outlet where the first router was located to set up another access point. This access point will provide Ethernet connections plus an additional wireless network (if it's still needed). However you cannot have two wireless devices on a single home network with the same SSID (i.e., network name). Here are details on some methods to do this:
http://www.dslreports.com/faq/12506
For additional details, here's the complete FAQ:
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=1&cad=rja&sqi=2&ved=0CCwQFjAA&url...
Take a careful look at these suggestions and references to decide if this is what you want. Then report back if there are remaining questions. Good luck. -
How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.
Phone A = phone with information you want duplicated
Phone B = phone that you want to copy from A
Backup Phone A.
Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup. -
How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.
Have the project, events and media on one drive which is common to both macs.
You can download FCP X to both macs using the same Apple ID that it was purchased with.
Andy -
Can we create two POs for the same 3rd party Sales Order?
Hi MM experts,
Issue: Can we create two POs for the same 3rd party Sales Order
In Third party purchase process, first sales order created with a spl. item category and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
If anyone face the same issue, please let me know if you have any answer to this questions.
Thanks in advance.
Suresh.Suresh,
It is hard for me to give you a definitive answer since you have created a customized solution.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
Normally, the system will not do this. A third party PR or PO will be 'account assigned' to the Sales order. SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention. Try searching for changes in the Sales order and changes in the original purchase order. They may give you a clue.
I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system). I don't know what ZTAG does. I confess I am not an SD expert. You might also want to post your question in an SD forum.
You mention two custom applications, ZMMPLAN and ZSTPMP. These somehow have functionality that is used to help you convert your PRs to POs. If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem. And please don't send me details about these apps. I will not comment on custom code in this forum.
Sorry I can't be of more help.
Rgds,
DB49 -
BAM Combo Chart showing data in 2 graphics for the same data object
Hi all,
I’m trying to show 2 views of the same data object in a Combo Chart (e.g. orders created today as a bar chart and orders created yesterday as line chart grouping by hour of day). It was pretty easy adding the same data object twice but the data type of the horizontal axis seems to be lost and it gets sorted as a simple string, leading to strange grouping of the hours with 05:00 representing 5 AM sided with 05:00 representing 5 PM. Also, I’m not able to format such fields using the format values tab.
Is using the same data object two times in the same report an unsupported scenario?
Thanks,
Danielwhy you want to add the same data object twice? Your use case can be achieved with single data object only.
1) Create combo chart and select the data object.
2) On "Choose data fields" page group by datetime field.
3) You will see UI changed to 3 sections - left one with "Group by" section, middle with "Chart values" and right one with "Time Groups".
4) In the right "Time Group" section, uncheck checkbox for continuous time series. Time Unit as hour, quantity as 1.
5) In middle "Chart values" section ,select the fields that you want to display as chart values and respective chart types , in your case orders created today as a bar chart and orders created yesterday as line chart.
5) Click Next and Finish.
6) Then you can go to Value format tab, and change the format for the datetime field as timeunit and required format. -
Urgent: two authors for the same book
I have a database with three tables: books, authors and aux.
The books table stores the names of the books. The authors table stores the name of the authors. Table aux takes the id of the other two. I did this for the case of the same book has two or more authors
The query I did was the following:
SELECT authores.author, books.title
FROM aux, authors, books
WHERE aux.books_id = books.id AND aux.authors_id = authors.id
ORDER BY books.title ASC
How do I show the two authors for the same book?
For now, I'm using a simple table:
<table border="1" cellpadding="1" cellspacing="1">
<tr>
<td>author</td>
<td>title</td>
</tr>
<?php do { ?>
<tr>
<td><?php echo $row_rsBooks['author']; ?></td>
<td><?php echo $row_rsBooks['title']; ?></td>
</tr>
<?php } while ($row_rsBooks = mysql_fetch_assoc($rsBooks)); ?>
</table>
Thus, the table presents two results for the same book, instead of uniting the two authors of the same book.Thanks for the reply.
In the meantime, got what I wanted. The expression looks like this:
SELECT livros.titulo, GROUP_CONCAT(autores.autor SEPARATOR ',') AS Autores
FROM livros INNER JOIN aux ON aux.livros_id = livros.id INNER JOIN autores ON aux.autores_id = autores.id
GROUP BY livros.titulo -
I was charged two times for the same game
I was charged two times for the same game...how can I get my money back? I even was emailed a receipt for them both...no one noticed? Please help me.
How to report an issue with Your iTunes Store purchase
-
Two infopackages for the same DS-- IS combination initialised
Hello Friends,
Can we have two infopackages for the same DS-->IS combination initialised with the same selections conditions and init requests. I have seen this in my client system. How can this be achieved.
Thanks for your help.
---SimmiThat is not possible.
Are you sure Inits were done for same selections ??? -
How to configure multiple listeners to listen for the same instance.
Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners -
APs using different channels for the same SSID
Hi,
This might be a stupid question, but I am wondering why my Aironet 1602i and 2602i access points connected to the same controller would use different channels for the same network. Would this be to avoid interference? If so, I am planning to put 9 access points throughout the office and they will be fairly close to each other. Would this increase the risk of interference?
Thanks,
TibetThat is normal. The WLC is determining the best channel and being in different channels is the best. When you add more, the WLC will decide by the use if RRM what channels and power levels to allocate to each AP.
Sent from Cisco Technical Support iPhone App
Maybe you are looking for
-
Sources of supply giving wrong results.
Dear experts, We are using SRM 4.0 ,server 500. When creating a shopping cart, and checking the proposed sources of supply for a particular product, we get a list of more than 20 contracts. (correct) When we directly want to create a PO we only get 6
-
Lightning Connector won't dock with 32 g Touch
5th Gen Ipod Touch, never dropped. Lightning connector won't dock with Ipod. I tried three different cables.
-
I downloaded the new version of itunes and it changed my path. I have over 10,000 songs in 100's of play list. This is the third time it has happened. It is putting file://localhost in front front of the path. Does anyone know why and has a solution
-
This should be simple but it's driving me crazy. I have set up iCloud folders for my iPhone and iPad. I have disabled the syncing facility as I know that if I delete photos on my iPhone then it deletes them on iCloud also. However, the files only app
-
ENVY m7-j020dx: Built-in camera is not working
Background: I have HP Support Assistant running and do all the updates regularly. Chipset/BIOS updates I have made regularly as well so the machine is up to date. I did upgarde to Windows 8.1 as soon as I got my machine less than a year ago Problem: