BAM Combo Chart showing data in 2 graphics for the same data object
Hi all,
I’m trying to show 2 views of the same data object in a Combo Chart (e.g. orders created today as a bar chart and orders created yesterday as line chart grouping by hour of day). It was pretty easy adding the same data object twice but the data type of the horizontal axis seems to be lost and it gets sorted as a simple string, leading to strange grouping of the hours with 05:00 representing 5 AM sided with 05:00 representing 5 PM. Also, I’m not able to format such fields using the format values tab.
Is using the same data object two times in the same report an unsupported scenario?
Thanks,
Daniel
why you want to add the same data object twice? Your use case can be achieved with single data object only.
1) Create combo chart and select the data object.
2) On "Choose data fields" page group by datetime field.
3) You will see UI changed to 3 sections - left one with "Group by" section, middle with "Chart values" and right one with "Time Groups".
4) In the right "Time Group" section, uncheck checkbox for continuous time series. Time Unit as hour, quantity as 1.
5) In middle "Chart values" section ,select the fields that you want to display as chart values and respective chart types , in your case orders created today as a bar chart and orders created yesterday as line chart.
5) Click Next and Finish.
6) Then you can go to Value format tab, and change the format for the datetime field as timeunit and required format.
Similar Messages
-
Multiple MM schedule lines for the same date
Hello All Gurus,
I am facing a problem where the MM schedule lines are divided into various quantites for the same date. For example on 02/11/2010 the total quantity is 120, it is appearing in the below form in ME38:
02/11/2010 - 40
02/11/2010 - 40
02/11/2010 - 40
Although this is not an error, but my client is not happy with this. Can someone tell me why I am getting this error? Is it because of the rounding value that we maintain in MRP 1 view of material master record? Or is there any other setting that I am missing?
Please let me know. I would be very much thankful to you.
Thanks and Regards,
UmakanthHi,
Before changing the setup, note that sometimes it is beneficial to split one demand into multiple delivery schedules. Especially if the demand is bigger than equipment type (container/truck etc.). If you want to manage inbound transportation for such delivery schedules, it is much simpler to do this when each delivery schedule is not bigger than one equipment.
Regards,
Dominik Modrzejewski -
Events cannot have multiple exceptions for the same date
I just starting getting this message and could not sync to one of my Google calendars. I'm posting this for others who might get the same problem.
I didn't find the answer on these forums but did find it on this thread on Google:
http://www.google.com/support/forum/p/Calendar/thread?tid=241155f758d9e2a4&hl=en
Here's the important excerpt:
"I had a client, who just had this same issue, nothing to do with Google cals.
It was apparently, in my best guess, a corruption of the subscribed cal.
*I did a get info on the cal, copied the URL, deleted the cal, then re-subscribed to it by pasting in the URL, and now it's working fine*."I've been having the same problem with my iCal calendars and the "Events cannot have multiple exceptions for the same date" error. Once it gets going, it uses up a lot of the CPU and resources. After reinstalling iCal, all my calendars were missing and I could not even resubscribe to them.
I took my MacBook Pro to the Apple Store, and they were able to solve the problem by moving some of the iCal files from their existing folders out to the desktop, and reopening the program. That got it working, however, now I'm having the same problem again. So back to square one. Anyone else having this issue and know the cause?
My setup is my MacBook Pro uses Entourage, use that calendar in my iCal. And I subscribe to two calendars my wife publishes on her Macbook. We're both using Snow Leopard. -
Quota is displayed twice in 2006 for the same date
When iam entering Leave Quota Through PA30 , PA61 ,PT_QTA00
for a particular Employee it will display the Quota Twice
Is there any way we can stop this ?
is there any way we can Put cap that double Entry for the same date ?
Quota is deducting Normally but it is Displaying Twice
Plz Help ExpertsThank You So much
i changed in the info type
SPRO>> Time Management>> Time Data Recording and Administration>> Specify System Reaction to Overlapping Time Infotypes
Infotype 2006
Time Cstr. Class 01
Reaction Indicator : select according to The Requirement
Right now Reaction Indicator is set to W
Make the Reaction Indicator to E and save the Entry
It worked for now
one thing iam not sure how does V_T554Y table work
Plz let me know
Reaction I ndicator
This indicator determines how the system reacts when you enter new infotype records which overlap with existing ones.
The specifications are as follows:
A - The old record is delimited, all collisions are displayed.
E - The system does not allow you to create the new record, and
displays all collisions.
W - You can create the new record, but the old record remains unchanged. All collisions are displayed.
N - As for W, but collisions are not displayed.
Edited by: jkhose on Jan 25, 2012 1:23 AM -
CBO generating different plans for the same data in similar Environments
Hi All
I have been trying to compare an SQL from 2 different but similar environments build of the same hardware specs .The issue I am facing is environment A, the query executes in less than 2 minutes with plan mostly showing full table scans and hash join whereas in environment B(problematic), it times out after 2 hours with an error of unable to extend table space . The statistics are up to date in both environments for both tables and indexes . System parameters are exactly similar(default oracle for except for multiblock_read_count ).
Both Environment have same db parameter for db_file_multiblock_read_count(16), optimizer(refer below),hash_area_size (131072),pga_aggregate_target(1G),db_block_size(8192) etc . SREADTIM, MREADTIM, CPUSPEED, MBRC are all null in aux_stats in both environment because workload was never collected i believe.
Attached is details about the SQL with table stats, SQL and index stats my main concern is CBO generating different plans for the similar data and statistics and same hardware and software specs. Is there any thing else I should consider .I generally see environment B being very slow and always plans tend to nested loops and index scan whereas what we really need is a sensible FTS in many cases. One of the very surprising thing is METER_CONFIG_HEADER below which has just 80 blocks of data is being asked for index scan.
show parameter optimizer
optimizer_dynamic_sampling integer 2
optimizer_features_enable string 10.2.0.4
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_mode string ALL_ROWS
optimizer_secure_view_merging boolean TRUE
**Environment**
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Note: : There are slight difference in the no of records in the attached sheet.However, I wanted to tell that i have tested with exact same data and was getting similar results but I couldn't retain the data untill collecting the details in the attachment
TEST1 COMPARE TABLE LEVE STATS used by CBO
ENVIRONMENT A
TABLE_NAME NUM_ROWS BLOCKS LAST_ANALYZED
ASSET 3607425 167760 5/02/2013 22:11
METER_CONFIG_HEADER 3658 80 5/01/2013 0:07
METER_CONFIG_ITEM 32310 496 5/01/2013 0:07
NMI 1899024 33557 18/02/2013 10:55
REGISTER 4830153 101504 18/02/2013 9:57
SDP_LOGICAL_ASSET 1607456 19137 18/02/2013 15:48
SDP_LOGICAL_REGISTER 5110781 78691 18/02/2013 9:56
SERVICE_DELIVERY_POINT 1425890 42468 18/02/2013 13:54
ENVIRONMENT B
TABLE_NAME NUM_ROWS BLOCKS LAST_ANALYZED
ASSET 4133939 198570 16/02/2013 10:02
METER_CONFIG_HEADER 3779 80 16/02/2013 10:55
METER_CONFIG_ITEM 33720 510 16/02/2013 10:55
NMI 1969000 33113 16/02/2013 10:58
REGISTER 5837874 120104 16/02/2013 11:05
SDP_LOGICAL_ASSET 1788152 22325 16/02/2013 11:06
SDP_LOGICAL_REGISTER 6101934 91088 16/02/2013 11:07
SERVICE_DELIVERY_POINT 1447589 43804 16/02/2013 11:11
TEST ITEM 2 COMPARE INDEX STATS used by CBO
ENVIRONMENT A
TABLE_NAME INDEX_NAME UNIQUENESS BLEVEL LEAF_BLOCKS DISTINCT_KEYS AVG_LEAF_BLOCKS_PER_KEY AVG_DATA_BLOCKS_PER_KEY CLUSTERING_FACTOR NUM_ROWS
ASSET IDX_AST_DEVICE_CATEGORY_SK NONUNIQUE 2 9878 67 147 12982 869801 3553095
ASSET IDX_A_SAPINTLOGDEV_SK NONUNIQUE 2 7291 2747 2 639 1755977 3597916
ASSET SYS_C00102592 UNIQUE 2 12488 3733831 1 1 3726639 3733831
METER_CONFIG_HEADER SYS_C0092052 UNIQUE 1 12 3670 1 1 3590 3670
METER_CONFIG_ITEM SYS_C0092074 UNIQUE 1 104 32310 1 1 32132 32310
NMI IDX_NMI_ID NONUNIQUE 2 6298 844853 1 2 1964769 1965029
NMI IDX_NMI_ID_NK NONUNIQUE 2 6701 1923072 1 1 1922831 1923084
NMI IDX_NMI_STATS NONUNIQUE 1 106 4 26 52 211 211
REGISTER REG_EFFECTIVE_DTM NONUNIQUE 2 12498 795 15 2899 2304831 4711808
REGISTER SYS_C00102653 UNIQUE 2 16942 5065660 1 1 5056855 5065660
SDP_LOGICAL_ASSET IDX_SLA_SAPINTLOGDEV_SK NONUNIQUE 2 3667 1607968 1 1 1607689 1607982
SDP_LOGICAL_ASSET IDX_SLA_SDP_SK NONUNIQUE 2 3811 668727 1 2 1606204 1607982
SDP_LOGICAL_ASSET SYS_C00102665 UNIQUE 2 5116 1529606 1 1 1528136 1529606
SDP_LOGICAL_REGISTER SYS_C00102677 UNIQUE 2 17370 5193638 1 1 5193623 5193638
SERVICE_DELIVERY_POINT IDX_SDP_NMI_SK NONUNIQUE 2 4406 676523 1 2 1423247 1425890
SERVICE_DELIVERY_POINT IDX_SDP_SAP_INT_NMI_SK NONUNIQUE 2 7374 676523 1 2 1458238 1461108
SERVICE_DELIVERY_POINT SYS_C00102687 UNIQUE 2 4737 1416207 1 1 1415022 1416207
ENVIRONMENT B
TABLE_NAME INDEX_NAME UNIQUENESS BLEVEL LEAF_BLOCKS DISTINCT_KEYS AVG_LEAF_BLOCKS_PER_KEY AVG_DATA_BLOCKS_PER_KEY CLUSTERING_FACTOR NUM_ROWS
ASSET IDX_AST_DEVICE_CATEGORY_SK NONUNIQUE 2 8606 121 71 16428 1987833 4162257
ASSET IDX_A_SAPINTLOGDEV_SK NONUNIQUE 2 8432 1780146 1 1 2048170 4162257
ASSET SYS_C00116157 UNIQUE 2 13597 4162263 1 1 4158759 4162263
METER_CONFIG_HEADER SYS_C00116570 UNIQUE 1 12 3779 1 1 3734 3779
METER_CONFIG_ITEM SYS_C00116592 UNIQUE 1 107 33720 1 1 33459 33720
NMI IDX_NMI_ID NONUNIQUE 2 6319 683370 1 2 1970460 1971313
NMI IDX_NMI_ID_NK NONUNIQUE 2 6597 1971293 1 1 1970771 1971313
NMI IDX_NMI_STATS NONUNIQUE 1 98 48 2 4 196 196
REGISTER REG_EFFECTIVE_DTM NONUNIQUE 2 15615 1273 12 2109 2685924 5886582
REGISTER SYS_C00116748 UNIQUE 2 19533 5886582 1 1 5845565 5886582
SDP_LOGICAL_ASSET IDX_SLA_SAPINTLOGDEV_SK NONUNIQUE 2 4111 1795084 1 1 1758441 1795130
SDP_LOGICAL_ASSET IDX_SLA_SDP_SK NONUNIQUE 2 4003 674249 1 2 1787987 1795130
SDP_LOGICAL_ASSET SYS_C004520 UNIQUE 2 5864 1795130 1 1 1782147 1795130
SDP_LOGICAL_REGISTER SYS_C004539 UNIQUE 2 20413 6152850 1 1 6073059 6152850
SERVICE_DELIVERY_POINT IDX_SDP_NMI_SK NONUNIQUE 2 3227 660649 1 2 1422572 1447803
SERVICE_DELIVERY_POINT IDX_SDP_SAP_INT_NMI_SK NONUNIQUE 2 6399 646257 1 2 1346948 1349993
SERVICE_DELIVERY_POINT SYS_C00128706 UNIQUE 2 4643 1447946 1 1 1442796 1447946
TEST ITEM 3 COMPARE PLANS
ENVIRONMENT A
Plan hash value: 4109575732
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 13 | 2067 | | 135K (2)| 00:27:05 |
| 1 | HASH UNIQUE | | 13 | 2067 | | 135K (2)| 00:27:05 |
|* 2 | HASH JOIN | | 13 | 2067 | | 135K (2)| 00:27:05 |
|* 3 | HASH JOIN | | 6 | 900 | | 135K (2)| 00:27:04 |
|* 4 | HASH JOIN ANTI | | 1 | 137 | | 135K (2)| 00:27:03 |
|* 5 | TABLE ACCESS BY INDEX ROWID| NMI | 1 | 22 | | 5 (0)| 00:00:01 |
| 6 | NESTED LOOPS | | 1 | 131 | | 95137 (2)| 00:19:02 |
|* 7 | HASH JOIN | | 1 | 109 | | 95132 (2)| 00:19:02 |
|* 8 | TABLE ACCESS FULL | ASSET | 36074 | 1021K| | 38553 (2)| 00:07:43 |
|* 9 | HASH JOIN | | 90361 | 7059K| 4040K| 56578 (2)| 00:11:19 |
|* 10 | HASH JOIN | | 52977 | 3414K| 2248K| 50654 (2)| 00:10:08 |
|* 11 | HASH JOIN | | 39674 | 1782K| | 40101 (2)| 00:08:02 |
|* 12 | TABLE ACCESS FULL | REGISTER | 39439 | 1232K| | 22584 (2)| 00:04:32 |
|* 13 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 4206K| 56M| | 17490 (2)| 00:03:30 |
|* 14 | TABLE ACCESS FULL | SERVICE_DELIVERY_POINT | 675K| 12M| | 9412 (2)| 00:01:53 |
|* 15 | TABLE ACCESS FULL | SDP_LOGICAL_ASSET | 1178K| 15M| | 4262 (2)| 00:00:52 |
|* 16 | INDEX RANGE SCAN | IDX_NMI_ID_NK | 2 | | | 2 (0)| 00:00:01 |
| 17 | VIEW | | 39674 | 232K| | 40101 (2)| 00:08:02 |
|* 18 | HASH JOIN | | 39674 | 1046K| | 40101 (2)| 00:08:02 |
|* 19 | TABLE ACCESS FULL | REGISTER | 39439 | 500K| | 22584 (2)| 00:04:32 |
|* 20 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 4206K| 56M| | 17490 (2)| 00:03:30 |
|* 21 | TABLE ACCESS FULL | METER_CONFIG_HEADER | 3658 | 47554 | | 19 (0)| 00:00:01 |
|* 22 | TABLE ACCESS FULL | METER_CONFIG_ITEM | 7590 | 68310 | | 112 (2)| 00:00:02 |
Predicate Information (identified by operation id):
2 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
3 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
4 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
5 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
7 - access("ASSET_CD"="EQUIP_CD" AND "SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
8 - filter("ROW_CURRENT_IND"='Y')
9 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
10 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
11 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
12 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='4' OR
SUBSTR("REGISTER_ID_CD",1,1)='5' OR SUBSTR("REGISTER_ID_CD",1,1)='6') AND "ROW_CURRENT_IND"='Y')
13 - filter("ROW_CURRENT_IND"='Y')
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y')
16 - access("NMI_SK"="NMI_SK")
18 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
19 - filter("REGISTER_TYPE_CD"='C' AND (SUBSTR("REGISTER_ID_CD",1,1)='1' OR
SUBSTR("REGISTER_ID_CD",1,1)='2' OR SUBSTR("REGISTER_ID_CD",1,1)='3') AND "ROW_CURRENT_IND"='Y')
20 - filter("ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
22 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
ENVIRONMENT B
Plan hash value: 2826260434
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 181 | 103K (2)| 00:20:47 |
| 1 | HASH UNIQUE | | 1 | 181 | 103K (2)| 00:20:47 |
|* 2 | HASH JOIN ANTI | | 1 | 181 | 103K (2)| 00:20:47 |
|* 3 | HASH JOIN | | 1 | 176 | 56855 (2)| 00:11:23 |
|* 4 | HASH JOIN | | 1 | 163 | 36577 (2)| 00:07:19 |
|* 5 | TABLE ACCESS BY INDEX ROWID | ASSET | 1 | 44 | 4 (0)| 00:00:01 |
| 6 | NESTED LOOPS | | 1 | 131 | 9834 (2)| 00:01:59 |
| 7 | NESTED LOOPS | | 1 | 87 | 9830 (2)| 00:01:58 |
| 8 | NESTED LOOPS | | 1 | 74 | 9825 (2)| 00:01:58 |
|* 9 | HASH JOIN | | 1 | 52 | 9820 (2)| 00:01:58 |
|* 10 | TABLE ACCESS BY INDEX ROWID| METER_CONFIG_HEADER | 1 | 14 | 1 (0)| 00:00:01 |
| 11 | NESTED LOOPS | | 1 | 33 | 116 (2)| 00:00:02 |
|* 12 | TABLE ACCESS FULL | METER_CONFIG_ITEM | 1 | 19 | 115 (2)| 00:00:02 |
|* 13 | INDEX RANGE SCAN | SYS_C00116570 | 1 | | 1 (0)| 00:00:01 |
|* 14 | TABLE ACCESS FULL | SERVICE_DELIVERY_POINT | 723K| 13M| 9699 (2)| 00:01:57 |
|* 15 | TABLE ACCESS BY INDEX ROWID | NMI | 1 | 22 | 5 (0)| 00:00:01 |
|* 16 | INDEX RANGE SCAN | IDX_NMI_ID_NK | 2 | | 2 (0)| 00:00:01 |
|* 17 | TABLE ACCESS BY INDEX ROWID | SDP_LOGICAL_ASSET | 1 | 13 | 5 (0)| 00:00:01 |
|* 18 | INDEX RANGE SCAN | IDX_SLA_SDP_SK | 2 | | 2 (0)| 00:00:01 |
|* 19 | INDEX RANGE SCAN | IDX_A_SAPINTLOGDEV_SK | 2 | | 2 (0)| 00:00:01 |
|* 20 | TABLE ACCESS FULL | REGISTER | 76113 | 2378K| 26743 (2)| 00:05:21 |
|* 21 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 5095K| 63M| 20245 (2)| 00:04:03 |
| 22 | VIEW | | 90889 | 443K| 47021 (2)| 00:09:25 |
|* 23 | HASH JOIN | | 90889 | 2307K| 47021 (2)| 00:09:25 |
|* 24 | TABLE ACCESS FULL | REGISTER | 76113 | 966K| 26743 (2)| 00:05:21 |
|* 25 | TABLE ACCESS FULL | SDP_LOGICAL_REGISTER | 5095K| 63M| 20245 (2)| 00:04:03 |
Predicate Information (identified by operation id):
2 - access("SERVICE_DELIVERY_POINT_SK"="TMP"."SERVICE_DELIVERY_POINT_SK")
3 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK" AND
"SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
4 - access("ASSET_CD"="EQUIP_CD")
5 - filter("ROW_CURRENT_IND"='Y')
9 - access("NETWORK_TARIFF_CD"="NETWORK_TARIFF_CD")
10 - filter("ROW_CURRENT_IND"='Y')
12 - filter("ROW_CURRENT_IND"='Y' AND "CONROL_REGISTER"='X')
13 - access("METER_CONFIG_HEADER_SK"="METER_CONFIG_HEADER_SK")
14 - filter("ROW_CURRENT_IND"='Y')
15 - filter("ROW_CURRENT_IND"='Y' AND ("NMI_STATUS_CD"='A' OR "NMI_STATUS_CD"='D'))
16 - access("NMI_SK"="NMI_SK")
17 - filter("ROW_CURRENT_IND"='Y')
18 - access("SERVICE_DELIVERY_POINT_SK"="SERVICE_DELIVERY_POINT_SK")
19 - access("SAP_INT_LOG_DEVICE_SK"="SAP_INT_LOG_DEVICE_SK")
20 - filter((SUBSTR("REGISTER_ID_CD",1,1)='4' OR SUBSTR("REGISTER_ID_CD",1,1)='5' OR
SUBSTR("REGISTER_ID_CD",1,1)='6') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
21 - filter("ROW_CURRENT_IND"='Y')
23 - access("SAP_INT_LOGICAL_REGISTER_SK"="SAP_INT_LOGICAL_REGISTER_SK")
24 - filter((SUBSTR("REGISTER_ID_CD",1,1)='1' OR SUBSTR("REGISTER_ID_CD",1,1)='2' OR
SUBSTR("REGISTER_ID_CD",1,1)='3') AND "REGISTER_TYPE_CD"='C' AND "ROW_CURRENT_IND"='Y')
25 - filter("ROW_CURRENT_IND"='Y')Edited by: abhilash173 on Feb 24, 2013 9:16 PM
Edited by: abhilash173 on Feb 24, 2013 9:18 PMHi Paul,
I misread your question initially .The system stats are outdated in both ( same result as seen from aux_stats) .I am not a DBA and do not have access to gather system stats fresh.
select * from sys.aux_stats$
SNAME PNAME PVAL1 PVAL2
SYSSTATS_INFO STATUS NULL COMPLETED
SYSSTATS_INFO DSTART NULL 02-16-2011 15:24
SYSSTATS_INFO DSTOP NULL 02-16-2011 15:24
SYSSTATS_INFO FLAGS 1 NULL
SYSSTATS_MAIN CPUSPEEDNW 1321.20523 NULL
SYSSTATS_MAIN IOSEEKTIM 10 NULL
SYSSTATS_MAIN IOTFRSPEED 4096 NULL
SYSSTATS_MAIN SREADTIM NULL NULL
SYSSTATS_MAIN MREADTIM NULL NULL
SYSSTATS_MAIN CPUSPEED NULL NULL
SYSSTATS_MAIN MBRC NULL NULL
SYSSTATS_MAIN MAXTHR NULL NULL
SYSSTATS_MAIN SLAVETHR NULL NULL -
How to handle Multiple date formats for the same date field in SQL*Loader
Dear All,
I got a requirement where I need to get data from a text file and insert the same into oracle table.
I am using SQL*Loader to populate the data from the text file into my table.
The file has one field where I am expecting date date data in multiple formats, like dd/mon/yyyy, yyyy/dd/mon, yyyy/mon/dd, ,mm/dd/yyyy, mon/dd/yyyy.
While using SQL*Loader, I can see Loading is failing for records where we have formats like yyyy/dd/mon, yyyy/mon/dd, mon/dd/yyyy.
Is there any way in SQL*Loader where we can mention all these date formats so that this date data should go smoothly into the underlying date column in the table.
Appreciate your response on this.
Thanks,
Madhu K.The point being made was, are you sure that you can uniquely identify a date format from the value you receieve? Are you sure that the data stored is only of a particular limited set of formats?
e.g. if you had a value of '07/08/03' how do you know what format that is?
It could be...
7th August 2003 (thus assuming it's DD/MM/RR format)
or
8th July 2003 (thus assuming it's MM/DD/RR format)
or
3rd August 2007 (thus assuming it's RR/MM/DD format)
or
8th March 2007 (thus assuming it's RR/DD/MM format)
or even more obscurely...
3rd July 2008 (MM/RR/DD)
or
7th March 2008 (DD/RR/MM)
Do you have any information to tell you what formats are valid that would allow you to be specific and know what date format is meant?
This is a classic example of why dates should be stored on the database using DATE datatype and not VARCHAR2. It can lead to corruption of data, especially if the date can be entered in any format a user wishes. -
Different Info Packages for the same data source.
Hi Team,
I have a question, which i asked before that but i ended up with different solution.
I want to load 02.2002 to till date into ODS. Data source is 0FI_AR_10.
My boss wants in this way .
1) one infopackage for 02.2002 to 02.2005 with init.
2) one infopack for 03.2005 to 07.2008 with init for the same datasource.
3) one info pack with no selection criteira.
What will be the result ?
My guess is, Once we do init for the time period 02.2002 to 02.2005 ,
the system with note the timepreiod for the Datasource.
When i try to do Init for the second, the system will say init already exits for the data source. And it will not allow me to do init for the second selection.
Correct me if i am wrong.
Regards,
-Sonti-Your planned InfoPackages:
- 1) one infopackage for 02.2002 to 02.2005 with init.
- 2) one infopack for 03.2005 to 07.2008 with init for the same datasource.
- 3) one info pack with no selection criteira.
As the selection criteria of package 1) & 2) do not overlap, is it possible.
For package 3), you need to do it as delta update instead of initialisation. Package 3) with no selection criteria overlaps with package 1) & 2).
Refer to the Help Documentation, which explains this quite clearly.
Link: [Maintaining InfoPackage - Tab Page: Updating|http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
>For selection criteria that do not overlap, several initialization criteria are possible for initializing the delta process when scheduling InfoPackages for data from an SAP system. This gives you the option of loading the relevant data for the delta process, step by step into the Business Information Warehouse. For example, you can load the data into BI for cost center 1000 in the first step, and the data for cost center 2000 in the second step.
>A delta requested after several initializations, contains the super set of all the successful initial selections as a selection condition. This selection condition can then no longer be changed for the delta.
Hope this help. -
Hi All,
I have a dimension object in Business Layer which is showing a different values than the original database values. When I right click on the object and select "Show List of Values its showing values which are not related to the original values in the database but if I right click on the same object and select "Preview List of Values" it shows the right values present in the database. Any suggestions on how to rectify. It was working good and many reports have been built using that particular dimension.
Is there any way to fix the problem without the deleting the object or recreating another similar object as the object has been used in several reports, so by deleting or recreating the object may break the reports.
Please help!Hi
A list of values is a list that contains the data values associated with an object, Lists of values inserted in the data foundation are inherited by any business layer based on the data foundation.
Right click on the object and select “Show Values”… Display all the DB values including null
Preview List of Values – also display same values...getting differnece meens...Check weather using any Static List of Values.
If you uncheck the Associated list of values check box "Preview List of Values" options is disabled.
For best practice …LOV is disabled for un-necessary dimension objects
Also If you have Db access check the correct data by
SELECT
Distinct Schema name. Table/View name. Object name
FROM
Schema.name. Table/View name -
How to load data using two maps for the same source file in Import Manager
Hi,
I am trying to load the source data to MDM using two map files, since one map is too big (creating memory error).
However the first map data able to see after loading (SAP data) but when loading second map(nonSAP data) using the remote key to match the previously loaded SAP key ,even if MDM is processing the data it is not reflecting in data manager.
Is there any reason for this.
Appreciate your suggestion and tips on this.
regrds,
ReoHi Reo,
As ur requirement seems,In the second pass perform recording matching by select default import action as "<b>update null fields only"</b> for those data records which are matching and "<b>create</b> " for those data records which are not matching with previous data records from SAP system.
If you define "update null fields only", then only the key of the new record from NON SAP will get appended to the existing record. And if you select "create" then it will create new records and will apply NON SAP key on it.
Please check the remote key values using data manager.Key is applied in the records or not.
Remember that import maps are client specific. Remote key comprises of both key and client system.So be sure that you are connecting to two different client systems.
I have tried this and this is working fine on my system.
Thanks,
Shiv Prashant Dixit
Thanks, -
How do I acess my iTunes account to make sure I have not been charged for downloads which are showing up on my I pod I downloaded the 80's album but it looks like it has downloaded it more than once thanks
You can view the purchase history on your account on your computer's iTunes via the Store > View Account menu option, on your account's details page there should be a purchase history section with a 'see all' link to its right : http://support.apple.com/kb/HT2727
-
2 data sources (oracle db) for the same report
Hi
I was wondering if I can have 2 sources (could be same or different instances). Example, I want to get information from one instance in the report trigger, and output of that i pass to the report (inside the query in the where clause).Is this possible with Oracle reports?
Any help appreciated.
Thx!Hi Dan
Thanks for the response.
I need some information (in before report trigger) - from one oracle instance - and then pass this information as a parameter to the report - whose output will come from another oracle instance.
I haven't given it a try yet what you had recommended but will do so.
Thx! -
Multiple reads of the same data from Multiprovider by Query (Bex)
Hello, guys!
We're having issue with performance of a query built on Multiprivider. During our investigation, we've found out that within one run of a Query, it several times refers to InfoProvider for the same data (see image attached).
Do you have ideas what can be a reason for multiply reads of the same data from Multipvovider?Hello Nikita,
By "copy of a query" i meant something like this as shown below :
*Kindly click on the screenshot for a better view.
1) See the highlighted portions below in the screenshot . See Query 2 highlighted and name of the BEx query highlighted.
2) See the highlighted portions . See Query 3 highlighted and name of the BEx query highlighted.
As you can see from the above screenshots i have used the same BEx query 2 times by the name of Query 2 & Query 3 . Infact i have not attached the complete screenhsot . In that i have used it 6 times.
I have to analyze this a bit in detail but what i am guessing is that when this WEBi is called the single BEx is also called multiple times. And hence it hits the Info Provider multiple times resulting in a decreased performance.
But this does not mean that this is wrong approach. There are various areas where you can improve for example :
1) Either improve your BEx query if possible or use aggregates or something like that .
2) Use the Query stripping setting in WEBi so that unused dimensions and measures are not pulled resulting in an improved performance. It's switched on by default.
Thanks!!
Regards,
Ashutosh Singh -
OBIEE 11g - Current year date and the same date in Previous year
Hi Experts,
I have an attribute say RECEIPT NO, i want to display the "No of Receipts" i.e(count(receipt no)) for any given date in the current year as well as for the same date in previous year.
Please suggest me how to achieve this in 11g.
ThanksHi Veeravalli,
Thanks for your prompt help.
Could you please ellobarate this. I have to display the count(receipt_no) for the last year same date.
Thanks -
How to load member for "sales same date last year"?
I need to load a member in Measures named "PriorYrSales" with "Sales" for the same date last year as today's date. Thus, retrieving "PriorYrSales" for 2/10/2002 would return the sales amount for 2/10/2001. Since days roll-up to months, quarters, years, it would be easy to determine how we're doing compared to the same time last year.Data is loaded each day for a date range from the current date and the preceding x days. Substitution variables are available for the beginning and ending date and the same dates for last year.For example: Data is loaded from beginning date of 2/01/2002 through ending date of 2/10/2002.The prior year date variables contain 2/01/2001 and 2/10/2001.The time period dimension is as follows:FY01->Jan2001-->01012001 (Alias: 1/01/2001)-->01022001 (Alias: 1/02/2001)-->all the dates in Jan->Feb2001-->02012001 (Alias: 2/01/2001)-->02022001 (Alias: 2/02/2001)-->all the dates in Febetc.FY02->Jan2002-->01012002 (Alias: 1/01/2002)-->01022002 (Alias: 1/02/2002)-->all the dates in Jan->Feb2002-->02012002 (Alias: 2/01/2002) -->02022002 (Alias: 2/01/2002)-->all the dates in Febetc.Thanks your any and all suggestions.Phil
Perhaps I wasn't clear in the first post. The intent is to easily compare sales for a current date/period to the same date/period last year. Neither Excel nor Analyzer provide a method that I'm aware of to retrieve data as follows:-------------------------------------Period Sales PriorYrSales Diff4/15/2002 1,000 900 100-------------------------------------(900 is sales for 4/15/2001)(100 is the calculated difference.)Nor can I do this:-------------------------------------Period Sales Period Sales Diff4/15/2002 1,000 4/15/2001 900 100-------------------------------------What Excel and Analyzer do allow is:-------------------------------------Period Sales 4/15/2002 1,0004/15/2001 900-------------------------------------I readily acknowledge that the data is redundant but I can't think of another option that will allow Excel and Analyzer to easily retrieve the values for comparison. If the PriorYrSales member can be loaded then the users can compare years, quarters, months and days quite easily.My challenge is knowing how use a calc script to derive prior year dates that correspond to current year dates. Something like:PriorYrSales->04152002 = Sales->04152001I've considered arrays but I've never used them and the documentation is not helpful enough for me.Thanks for your response.Phil
-
Multiple Purchase Requisition generate in the same date WHY ?
Hi All,
In MD04 Tcode for one Material No , I can see multiple PR getting generated for the same Date !! I would like to know based on what settings same date is appearing ?? and also please tell how to combine all this PR into one PR !!! Please guide me
Thanks & Regards,
Vinoth.Hi,
Che on it:-
Re: Third party Drop Ship
Re: Single PO for Multiple PR
Re: MD04 + Auto PR generation
pherasath
Maybe you are looking for
-
Error 10846 occurs only if DMA mode for transfer ist selected
Hello, my problem is if I use the DMA mode to for transferring data to the PCs memory always the error 10846 occurs. I perform the buffered semiperiod measurement with a continuous buffer (circular buffer). I tried to use Interrupts. The error does n
-
Hello, I am creating a workflow to get the users manager and set it as a variable in order to then email the list item for approval. I have set the manager as the variable however I am no sure how to then set the variable as the recipient of the emai
-
Af:collectionDragSource and drop not working in Firefor 3
Hi, Collection Drag and drop is not working in firefox 3 (dint checked in firefox2), its working fine in IE7, not sure if this is bug in firefox or adf components or am I missing something? You can check by going to the following link, try "Table wit
-
I have a new RVS4000 router, which is hosing a seagate GoFlec Home drive. Origianally my WRT54G router worked fine. I cannot get the UPnP to work. I have UPnP enabled. I have my goFlex Home to automatically configure router for portforwarding, ports
-
My iPhone won't "restore." (error code 1604)
I got it to the point where the iTunes logo is showing on the screen with the picture of the plug underneath it (meaning: sync your iPhone) and when iTunes opens it tells me that it's "detected an iPhone in recovery mode" and my iPhone "needs to be r