How to map the following pricing procedure in SAP

hello all guru of SAP,
here is the pricing which is used in our company so i want to map it in SAP
so how to do this
just bellow is the example
spoiler maruti zen vxi material name    779SMZV is the material number
basic price @36.11 for 300unit is                10833
MRP @117 for 300units                             35100
MRP price after [email protected]%             23341.50
Total basic price                                               10833
assesable price after abatement                         23341.50
assesable value                                                  10833
excise duty on MRP after abatement@16%            3735
CESS on excise duty  @2%                                     75
CESS duty for secandary higher education@1%         37 
total net sales                                                       14680
sales tax [email protected]%                                                 1835
total value                                                              16515
so please help me what is the best possible way to map this pricing procedure in sap what should be the condition and wat should be the configuration
with lots of hope
subrat ranjan panda
9313480938
[email protected]

I m not able to understand urs query, if u can explain more then i might be able to help you. You can mail me or call me
regards
pradeep
+91 9971375659
[email protected]

Similar Messages

  • Urgent: How to bring the same pricing procedure in reversal order??

    Hi,
    We have recently implementated CIN at our client location. For the orders present in the system before CIN implementation, when we are creating the reversal orders, system is bringing the new pricing procedure with CIN condition types?
    Can we bring the same pricing procedure in the reversal order as in the sales order? 
    Please advise urgently.
    Regards,
    Peeyoosh.

    Dear Peeyoosh
    I am unable to understand from your comments
    "For the orders present in the system before CIN implementation, when we are creating the reversal orders"
    Please let me know how do you reverse a sale order.  To my knowledge, we can reverse delivery and billing but not sale order.  Either we can close the sale order by assigning some reason for rejection or delete the sale order.
    This being the case, please let me know why you are reversing and how you are reversing.  If you want the same pricing procedure for both normal sales and returns, then maintain the same pricing procedure for both document types.
    thanks
    G.  Lakshmipathi

  • How to replicate a new pricing procedure from SAP ERP?

    Dear Experts,
    I have set up a new pricing procedure in the ERP backend and I would like to replicate this to SAP CRM.
    A replication using object DNL_CUST_CNDALL has been executed once in the past.
    What would be the best way for me to download the new pricing procedure without overwritting any of the existing pricing settings in SAP CRM?
    Thanks,
    Dan

    Hello Dan,
    The views in CRM pricing customizing do not allow to change the pricing procedures, condition types and access sequences that have been downloaded from the ERP system. You will see a field in customizing Source System with value A indicating that these were not created originally in CRM and the view does not go to edit mode.
    In case a i.e. condition type had been created originally in CRM with the same name as a condition type that exists in the ERP the download of the adapter object will not delete the condition type that was created in CRM.
    Therefore it is safe to execute the initial download of the adapter object DNL_CUST_CNDALL without filtering. If you have many pricing procedures in the ERP and you do not want to transfer its customizing to CRM you can create your own adapter object by copying the content of DNL_CUST_CNDALL ( to be on the safe side and keep the original) and then add a filter in your adapter object ,for example in pricing procedures using field KALSM of table T683S, including all the pricing procedures that must be transferred to CRM u2013 those that were transferred in the past and the one that you want to transfer now .However this filter is optional, most SAP customers do not change the standard filters.
    The usual options are:
    -- Download only DNL_CUST_CNDALL (or a Z object that was created based on DNL_CUST_CNDALL) which contains client dependent and also  independent customizing ( i.e access sequences, condition tables).  Condition tables may be generated too and it can take longer, maybe up to 45 minutes or so.
    -- If you have made changes only to pricing procedure(s) or condition types u2013 client dependent customizing--  it will be enough if you download only DNL_CUST_PRC. As there is no generation of condition tables the download will be faster.
    But you must consider that you should not download both adapter objects at the same time ( overlapping times), as part of the content being downloaded is the same and the database will be inconsistent. This can cause errors in pricing, not a severe issue, as it can be solved by a new download of  DNL_CUST_CNDALL, but an issue that causes trouble as it is sometimes difficult to determine the root cause of the problem. So if you for whatever reason ( i.e. additional changes in a condition type) download both adapter objects you should always check R3AM1 and download the second object when the download of the first one has finished ( green light in transaction R3AM1)
    Best Regards
    Luis Rivera

  • How we can configure new pricing procedure at the time of billing document

    Hi SD Gurus,
    Can u plz tell me how we can configure new pricing procedure at the time of billing document level.
    Thanks & Regards,
    Sreenivas.P

    Hello,
    Why?
    The sales order confirms the price given to the customer.  If you have re-determined a new price/discount then you may consider in VTFL to use pricing type C.
    Regards
    Waza

  • Script:how to solve the following

    Hi to all,
    Can u please tell me how to solve the following:
    Created standard texts, styles, character strings and called them in layout sets copied the standard layout set from client '000' further modified the layout according to requirements.
    Thanks in advance.
    Regards
    Monalisa

    STATUS in USER_OBJECTS
    "OBJECT_NAME"
    "SUBOBJECT_NAME"
    "OBJECT_ID"
    "DATA_OBJECT_ID"
    "OBJECT_TYPE"
    "CREATED"
    "LAST_DDL_TIME"
    "TIMESTAMP"
    "STATUS"
    "TEMPORARY"
    "GENERATED"
    "SECONDARY"
    "NAMESPACE"
    "EDITION_NAME"
    "CUSTOMERS"
    70645
    70645
    "TABLE"
    03-AUG-13
    03-AUG-13
    "2013-08-03:17:59:09"
    "VALID"
    "N"
    "N"
    "N"
    1
    "CUSTOMERS_PK"
    70646
    70646
    "INDEX"
    03-AUG-13
    03-AUG-13
    "2013-08-03:17:59:09"
    "VALID"
    "N"
    "N"
    "N"
    4
    "DEPARTMENTS_PK"
    70656
    70656
    "INDEX"
    03-AUG-13
    03-AUG-13
    "2013-08-03:18:32:32"
    "VALID"
    "N"
    "N"
    "N"
    4
    "EMPLOYEES"
    70657
    70657
    "TABLE"
    03-AUG-13
    03-AUG-13
    "2013-08-03:18:32:57"
    "VALID"
    "N"
    "N"
    "N"
    1
    "DEPARTMENTS"
    70655
    70655
    "TABLE"
    03-AUG-13
    03-AUG-13
    "2013-08-03:18:32:32"
    "VALID"
    "N"
    "N"
    "N"
    1
    "EMPLOYEES_PK"
    70658
    70658
    "INDEX"
    03-AUG-13
    03-AUG-13
    "2013-08-03:18:32:57"
    "VALID"
    "N"
    "N"
    "N"
    4
    "SUPPLIERS"
    70659
    70659
    "TABLE"
    03-AUG-13
    03-AUG-13
    "2013-08-03:20:25:41"
    "VALID"
    "N"
    "N"
    "N"
    1
    "SUPPLIERS_PK"
    70660
    70660
    "INDEX"
    03-AUG-13
    03-AUG-13
    "2013-08-03:20:25:41"
    "VALID"
    "N"
    "N"
    "N"
    4
    "PRODUCTS"
    70661
    70661
    "TABLE"
    03-AUG-13
    03-AUG-13
    "2013-08-03:20:28:32"
    "VALID"
    "N"
    "N"
    "N"
    1
    "PRODUCTS_PK"
    70662
    70662
    "INDEX"
    03-AUG-13
    03-AUG-13
    "2013-08-03:20:28:32"
    "VALID"
    "N"
    "N"
    "N"
    4
    "PERSONS_PK"
    70687
    70687
    "INDEX"
    10-AUG-13
    10-AUG-13
    "2013-08-10:22:37:34"
    "VALID"
    "N"
    "N"
    "N"
    4
    "PERSONS"
    70686
    70686
    "TABLE"
    10-AUG-13
    10-AUG-13
    "2013-08-10:22:37:34"
    "VALID"
    "N"
    "N"
    "N"
    1
    "APEX_SYS_PCK"
    70776
    0
    "PACKAGE"
    13-AUG-13
    15-AUG-13
    "2013-08-15:19:56:47"
    "INVALID"
    "N"
    "N"
    "N"
    1
    "GET_LOGIN_CREDENTIALS"
    70775
    0
    "PROCEDURE"
    13-AUG-13
    13-AUG-13
    "2013-08-13:22:26:49"
    "INVALID"
    "N"
    "N"
    "N"
    1
    "APEX_SYS_PCK"
    70792
    0
    "PACKAGE BODY"
    15-AUG-13
    15-AUG-13
    "2013-08-15:19:56:47"
    "INVALID"
    "N"
    "N"
    "N"
    2
    "EMP_MAINT"
    70802
    0
    "PACKAGE"
    15-AUG-13
    15-AUG-13
    "2013-08-15:19:54:39"
    "INVALID"
    "N"
    "N"
    "N"
    1

  • Whta is the standard pricing procedure in CIN INDIA

    i want to take a standard pricing procedure ,so what is the standard pricing procedure in CIN INDIA
    i want to include the condition like
    <b>base price
    maximum retailing price
    customer discount
    material discount
    excise duty
    VAT
    educational cess
    additional cess duty</b>
    i want to know what should be the customer pricing procedure
    and document pricing procedure

    hi,
    pl use TAXINN. Remaining as usual.
    TAXINJ & TAXINN are Tax Procedures in India. TAXINJ is old version & TAX INN is new version. Both has its own advantage & disadvantage.
    Upto 4.6C & partially 4.7 version of SAP, TAXINJ was used. TAXINJ is formula based calculation, in which we maintain the tax rate in Tax Code itself. The implication is that if say we are having product range such that say Excise rate differes for separate chapter ID, VAT, CST & permutation & combination of these, we require that many Tax Codes. For example:
    Tax Code: A1
    Taxes: 16% Excise Duty + 2% Education Cess + 12% VAT
    Tax Code: A2
    Taxes: 16% Excise Duty + 2% Education Cess + 8% VAT
    Tax Code: A3
    Taxes: 12% Excise Duty + 2% Education Cess + 12% VAT
    Tax Code: A3
    Taxes: 12% Excise Duty + 2% Education Cess + 8% VAT
    From 4.7 version onwards of SAP, TAXINN is being recommended & used. TAXINN is more user friendly & condition record based. In TAXINN, Tax Codes are statistical & of not much relevance, but are required to be maintained in condition record for taxes condition type. This makes Tax Codes simpler. The implication is that if say we are having product range such that say Excise rate differes for separate chapter ID, VAT, CST, we need not have the tax codes to that combination. For example:
    Tax Code: A1
    Can be used for any rate of excise duty, as tax code is only required to be maintained statistically in condition record.
    Tax Code: A2
    Can be used for any rate of VAT, as tax code is only required to be maintained statistically in condition record.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Select Tax Calculation Procedure
    Use
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
    • If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    • If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
    Maintain Excise Defaults
    Use
    In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    Activities
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    • Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    • Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    • Specify the conditions in the sales order that are used for excise rates.
    • Specify the countervailing duty condition type used for import purchase orders.
    Regards,
    Rajesh Banka
    Reward points if helpful.
    Rajesh Banka  
    Posts: 1,308
    Questions: 7
    Registered: 11/21/06
    Forum points: 1,800 
       Re: Taxinn tax procedure settings in SD pricing  
    Posted: May 6, 2007 11:34 AM    in response to: Sunil Kumar Garg       Reply      E-mail this post 
    Impact on Pricing Procedure & Condition Record:
    Another Important difference between TAXINJ & TAXINN is that in TAXINJ along with formula in Tax Code, you also have to maintain condition record & there are 2 condition types for Basic Excise duty & similarly other excise duties. in one condition you maintain the actual excise duty % & in other you main as 100%, which will be a copy of actual excise duty. But in TAXINN, instead of 2, you require to maintain only one condition type for each excise dity like JEXP for Basic Excise duty & similarly for other excise duties. You require to design pricing procedure accordingly.
    source forum thread :
    <a href="https://forums.sdn.sap.com/click.jspa?searchID=2814520&messageID=3397693">source thread</a>
    thanks.
    Sadhu Kishore

  • Forward and Reverse Pricing Calculations in the Same Pricing procedure

    Hello,
    I have a requirement where the Pricing has to set up to do the forward as reverse calculations in the same pricing procedure,For example:
    There is :
    PR00-Base Price
    Less
    K004:Discount(%)
    will give
    ZN00:Net Price
    Less Cost
    EK02
    will give the Profit Margin-ZMAR
    Forward calculation is possible as per SAP standard but the requirement is also to do reverse calculation such as
    By entering Profit Margin-,The system should do a backward(Reverse calculation) and arrive on the Net price from the Net Price(ZN00) it should calculate the Duscount automatically.
    Your inputs on this would be most helpful.
    Regards
    Mohammed Roshan

    hi,
    In Sale Order / Billing, in normal circumstances, tax will be calculated on the base price.   On the other hand, if you want the system to reverse calculate, you can achieve the same.
    In normal circumstances, system will calculate as follows:-,
    you maintained the PR00 of a material as                                                           Rs 200.00
    and  Discount                                                                                Rs.  25.00                                                                               
                            Net Value                                                                                Rs.175.00
    If you want to reverse calculate which means your invoice value itself should be Rs.200.00 which is inclusive of Discount. Then your Discount condition type (or in case there is tax, any tax condition type - MWST / UTXJ) have the Calculation Type as u201CHu201D
    With the above settings, your actual PR00 value would be 225.00 only, though you maintained Rs.200.00 for PR00.

  • How to map the node which i have created dynamically into the view

    Hi All,
    Many thanks to all ur answers in advance.
    I have created a node dynamically.I want to display the fields which i have fetched in that node.
    i dont know how to map the node which i have created dynamically into the layout of the view.
    Other than Using ALV is there any other way to do.
    for example usin table control

    Hi,
    use the reference variable of view to access the corresponding UI element and then use the method of that UI element to do data binding with context node.
    for ex:
    Context node = flights
    element = inputfield, ID = inp_name
    data view type ref to if_wd_view.
    data lr_inp type ref to cl_wd_input_field.
    lr_inp ?= view->get_child_element( ' INP_NAME' ).
    use following methods of input field to define the data binding.
    SET__DDIC_BINDING( )
    BOUND__PROPERTY( ).
    BOUND__PRIMARY_PROPERTY( ). " for input field it is value property.
    Get the reference of view from wddomodifyview method as importing parameter(view). Store this parameter as controller attribute.
    Thanks,
    Rahul

  • How to Map the Unit field  in case of DSO and INFOCUBE

    Dear Experts,
    I have a issue ,Please help me to solve this
    I have DSO as provider ,
    And, i have to map transformations  btw the Datasource and DSO.
    In generic Data source,  i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
    and normal Quantity fields  like KWMNG,OAUME(quantity related),OAUWE (value related).
    In DSO data fields as Key figure info objects like  0Quantity (which have 0Unit as unit of measure) and some other  key figures which have there respective unit of measure in info object  definition.
    So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
    (How it will be for both DSO and Info cube is there any difference?)
    Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PM

    Navasamol ,
    If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
    what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
    And i have  seen the Quantity fields  and there respective unit fields are mapped directly  to key figure info object
    in case of Info cube . Its working fine .
    If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
    why this difference btw DSO and Info cube can any one explain me in detail.
    Expecting your valuable suggestions.
    Thanks & Regards,
    Anjunath Naidu
    Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM

  • Mapping the Follow-up action to the Usage-Decision

    Hi All,
               I have a the following requirement in my development:
    The Usage decision needs three function-modules for the three cases of the follow-up process.
    In addition to that this ,service shall have a control table in Customizing, where the customer is able to decide which follow-up action should be made. (not standard customzing). The function-module for this process is not standard.
    1) Does the second requirement also require FM?
    2) Please give me the steps to map the Follow-up action to the Usage-Decision in SPRO
    Thanks,
    Vasuki

    Hi
    First create the follow up action which you want, and assign the same in QS51 t.code to your UD code group.
    Thanks
    S.Murali

  • How to handle the different pricing conditions changes in BI.

    Dear Friends
    can any one send me  Regarding
                    How to handle the different pricing conditions changes in BI.
    Thanks & Regards
    Ramana

    Hi,
    Take a look at the 0sd_o06 ODS and 2lis_13_vdkon datasource for sales billing conditions.
    http://help.sap.com/saphelp_nw70/helpdata/EN/36/8188408bc0bb4de10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
    Regards.

  • How to Map the parameters in GP interface?

    Hello All ,
    I have 2 callable objects in two different actions for same Block. How to map the first callable object output to input of second callable object ??
    Please give the clear details.
    Thanks
    Risha

    Hello,
    Goto the Block -> Parameters tab....select the 2 parameters ...click on Group button .....give a name to it and click 'Create Group' button.....
    Regards,
    Shikhil

  • How to map the user to Responsible Person for Proj/ Capital Investment Prog

    Hi All,
    Could you please help me in mapping the user to Responsible Person for Proj/ Capital Investment Prog.
    Here is the scenario. I am trying to restrict the user to access only WBS under a cost center but not to have complete access to the Cost Center. I in my way to do, I found out that we can create a user name using OPS6 tcode and use the reference number of the user we created in CJ20N, so as only the person who was added in the Responsible Person for Proj/ Capital Investment Prog list will be able to access particular WBS.
    Now my question is, How to map the user which I created using OPS6 tcode to user in user master record. I am not able to map the user, as its taking any random name to add in the list. Could some one please help me in mapping the user created in the list with the user master record.
    Hope I managed to put the question clearly. If you have any queries, please feel free to ask. Appreciate your time and thanks in advance.
    Farooq.

    Hi Stephan,
    Thanks for your time and finding SAP note for me. I got the problem fixed. The solution for the above problem is, When we create a responsible person for the project through OPS6 tcode, we have a column called "Offer User", next to the person responsible. We must add the user name next to it. And we can add only the user name which is present in the user master record.
    It solved my problem, but when I pressed F1 for help in this column, there is nothing mentioned about its mapping or anything.
    Thanks again for the help, Cheers,
    Regards,
    Farooq.

  • How  to map the Third Party materila for Job Wok process in our Plant

    Dear All,
    please guide me how  to map the  Third Party  Subcontracting in Our Plant Means Customer materials to be Processed  in our Plant and  then we have to sent to customer after processing.
    please  Brief me  with the Proces sflow
    Reagrds
    kishore Edagali

    1) create a 2 material as non valuated (one incoming material "A1"& after processed material"B1")
    2) create a BOM. for A1
    & assign the B1 and maintain respective conversion
    3) create a routing for A1 and assign the relevant work center
    4) create a manual PO to receive the material from customer and store it in storage location
    5) create a production order and release the order  in co01
    6)issue the material :B1 to the order 9 in MB1a, 261 movement)
    7) and confirm the order (so that cost incurred for order is captured)
    8) create a  sale order and maintain service price in PR00 and send the material A1 to customer.

  • How to map the bulk users with the required  roles in portal at one time

    Hi,
    Would anyone tell me how to map the bulk users with the required roles in portal at one time?

    Thanks for all the reply.
    <b>I need to assign 1 or 2 group to n((eg) 1000)number of users</b>
    I tried the first option like
    [group]
    gid=
    gdesc=
    user=
    Thr problem with this is I could n't put more no of users in the notepad.
    I would be able to put only 150 users in the single line of notepad. If it goes to next line it is not working.
    I tried creating seperate notepad but in Import it says "exists"
    I'm not sure about LDAP. Would anyone explain me the best approach to do this.

Maybe you are looking for