How to map the user to Responsible Person for Proj/ Capital Investment Prog

Hi All,
Could you please help me in mapping the user to Responsible Person for Proj/ Capital Investment Prog.
Here is the scenario. I am trying to restrict the user to access only WBS under a cost center but not to have complete access to the Cost Center. I in my way to do, I found out that we can create a user name using OPS6 tcode and use the reference number of the user we created in CJ20N, so as only the person who was added in the Responsible Person for Proj/ Capital Investment Prog list will be able to access particular WBS.
Now my question is, How to map the user which I created using OPS6 tcode to user in user master record. I am not able to map the user, as its taking any random name to add in the list. Could some one please help me in mapping the user created in the list with the user master record.
Hope I managed to put the question clearly. If you have any queries, please feel free to ask. Appreciate your time and thanks in advance.
Farooq.

Hi Stephan,
Thanks for your time and finding SAP note for me. I got the problem fixed. The solution for the above problem is, When we create a responsible person for the project through OPS6 tcode, we have a column called "Offer User", next to the person responsible. We must add the user name next to it. And we can add only the user name which is present in the user master record.
It solved my problem, but when I pressed F1 for help in this column, there is nothing mentioned about its mapping or anything.
Thanks again for the help, Cheers,
Regards,
Farooq.

Similar Messages

  • How to generate the User-Input XML Body for executing workflows via REST APIs: The Solution

    I see that executing a workflow via REST APIs requires lot of work to be done just to prepare the right User-input XML body. Any mistake and you have some major debugging to do. Larger the number of User-Inputs, the bigger is the problem.Life is so much easier at the WFA GUI with Display names and tooltip help for User Inputs which are very easy for reading and providing the right values. I don't have any such privileges when manually preparing the User-Input XML body.It’s been asked numerous times how to provide User-Input values for type table, or Query (Multi-Select) etc. These are complex User-Input types and has lots of scope for user mistakes.I can have User-input dependency at WFA GUI which allows me to make the right selection, but while preparing my XML body I need to take care of it myself.An operator is allowed to execute workflows, but the same Display names which help him make the right user-inputs, makes it impossible for him to prepare the user-input body xml. Display names can't be used in in XML body and he can't know the exact parameter names by looking at the Display names. So he need to always contact the Admins/Architects for this. And Architects/Admins can't be expected to keep providing User-Input XML body to operators every operator. How about if I could enter all the User-Input values in my workflow execution at WFA GUI, I can do a preview which passed to my satisfaction and then I can magically get the XML body for it which I can use to execute my workflow from REST APIs from any client. It could be so very much easy for me than building my User-Input XML body manually. This is exactly what I'm going to give you right now. You open the WFA in browser, Go to your workflow, Start execution, you input values from GUI reading carefully the display names, preview it to your satisfaction and then get the XML body. Assume your workflow is called “Workflow to Print a given Message”. It’s a simple workflow with only 1 user-input Displayed as "Message to Print" Prerequisites:  The following are the one-time prerequisites. You need PowerShell 3.0 on your WFA server.Import the attached Generate_Workflow_User_Input_Body_in_XML.dar in your WFA. It’s our magical command called "Generate Workflow User Input Body in XML"Add credentials of a WFA Admin/Architect in you WFA itself with Name/IP: localhostMatch: ExactType: OtherName/IP: localhostUsername: <WFA Admin/Architect Username>Password: <User Password>   Steps: Suppose you have a workflow called "Workflow to Print a given Message". You want to execute it from REST apis and need to prepare the user input XML body.  Select this workflow and clone it. The workflow clone is the exact copy of your original workflow word by word, input-by-input. It will open in Edit mode with name "Workflow to Print a given Message - copy".Add the command "Generate Workflow User Input Body in XML" at the beginning of your workflow. This is a must. This command need to be the first command in your cloned workflow.This command requires no input. So for its Parameters just press okay and save the workflow.You are done.Now Execute the clone workflow. You'll see all the user-inputs available to you. Make your choices as you wish. Preview it to confirm that planning is passed and u have no errors.Execute it now.You'll see that the our magical command "Generate Workflow User Input Body in XML" has failed in our clone workflow execution. Don't worry, its fate was decided to be so. But it didn't fail before giving me what I really wanted. i.e. my XML body for my real workflow. It displayed it in the GUI as well as saved it in your WFA server @ C:\temp\<workflow_name_dd_MM_yyyy_hh_mm_ss_.xmlIt also deleted all the reservations of this particular failed job. So NO major residue left to be cleaned.To summarize: Clone Your workflow and Add the command "Generate Workflow User Input Body in XML" as your first command.    Start Execution, provide your User-inputs and preview it. Be satisfied and Press Okay.   Now Execute it.  After a few scconds this cloned workflow will fail with Error "All done. The Workflow will fail now."     See the command execution logs for this command. You'll see the User-Input XML body. It has also saved the XML file at C:\temp in your WFA server.   Have fun. sinhaa  

    Providing a new version 1.1.0 of the command "WFA Schedular" Changes made: Added conditional String Representation based on the Scheduling parameter provided. Provided check for the right number of parameters passed into the command.Added a new parameter "Expiry Date" to automatically stop the recurring execution upon expiry.Check for Posh3.0 version in code.Have Fun!! sinhaa Below example for:Schedule a workflow for recurring execution every alternate day i.e. once in 2 days at 10:30 PM starting 06-Jul-2015 (Today's date is 02-Jul-2015) . The recurring workflow execution  should expire on 31-Dec-2015 and stop.  

  • How to find the user exits and BADIS from SPRO

    Hi all,
    please let us know how to find the User exits or BADIS for an application from SPRO.
    Regards,
    Madhavi

    Hi Varisetty,
    Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
    For User Exit:
    Put "/h" in the command box (to start debugging)
    Execute your transaction
    When you enter debugging - put a breakpoint at statement
    CALL CUSTOMER-FUNCTION
    the control will stop at all calls to User Exits
    For BAdi (it's simpler)
    Go to class CL_EXITHANDLER in SE24
    Enter method GET_INSTANCE
    Put a breakpoint in this method
    Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
    Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
    Cheers,
    Adi

  • How to restrict the user in MIRO for not modifying  price

    Hi All 
    My requirement is How to restrict the users in MIRO screen for not modifying Material Prices  of only the for specific  ROH types .
    For example :
    Valuation class             RM description
      3021                             RM - A
      3022                             RM - B
      3024                             RM - C
    when ever we procure  the above Raw materials A,B and C and
    the Quantity of each Raw material @ 10 units  and value @ 1 INR  for each unit
    RM - A procured qty 10 @1 total price is INR  10
    RM - B procured qty 10 @1 total  price is INR 10
    RM - C procured qty 10 @1 total  price is INR 10
    total price of PO is INR 30
    when we received invoice material prices are  assume it INR 1 is excess for each material.Now the invoice price for each RM has become INR 11.
    in MIRO we want restrict the user to change the price from INR 10 to 11.
    suggest the best possible ways to restrict in MIRO screen
    Thanks & Regards
    Mala

    Dear:   
                      Take help of ABABPER fo implement exit using INVOICE_UPDATE or MRMH0003 Logistics Invoice Verification: Revaluation/RAP exit. If this does not help then seek help of MM functional who will help you to find exit for the required task.
    rEGARDS

  • How to map the bulk users with the required  roles in portal at one time

    Hi,
    Would anyone tell me how to map the bulk users with the required roles in portal at one time?

    Thanks for all the reply.
    <b>I need to assign 1 or 2 group to n((eg) 1000)number of users</b>
    I tried the first option like
    [group]
    gid=
    gdesc=
    user=
    Thr problem with this is I could n't put more no of users in the notepad.
    I would be able to put only 150 users in the single line of notepad. If it goes to next line it is not working.
    I tried creating seperate notepad but in Import it says "exists"
    I'm not sure about LDAP. Would anyone explain me the best approach to do this.

  • How to avoid the "Enter Employee Responsible" error in an Opportunity

    Hi CRM gurus,
    My employer wants me to create a custom Lead Type (and an Opportunity Type) which will look just like the SAP default Lead (and Opportunity Type respectively), except that he wants a custom Partner Function called "Sales Person" instead of the two default Partner Functions "Sales Representative" and "Employee Responsible".
    So, I made a copy of the PF "Employee Responsible" and named it as "Sales Person". I made a copy of the Partner Determination Procedure for both Lead and Opportunity Transactions. Deleted the PFs "Sales Representative" and "Employee Responsible", and added the PF "Sales Person". I made a copy of the Lead and Opportunity Transaction Types, and assigned the appropriate PF Determination Procedures. I got the Access Sequence and the Partner Determination Procedure right (checked it by clicking the button "Check Part. Determ. Proc"). I did all the miscelleneous minor changes that need to be done.
    Now, when I create a Lead, and then create an Opportunity as a follow up document, and add a Product to this and try saving the Opportunity, I get an error message saying "Enter Employee Responsible".
    It seems that the PF "Employee Responsible" is a required field in the SAP default Opportunity, but how can I avoid that in my custom Opportunity?
    Even if we try to avoid this PF now, does it have any repercussions in the follow-up documents that get generated from this transaction (like Sales Quotation, Sales Order etc) or in any other way. How important is the PF "Employee Responsible", or better, what's the significance of this PF in the Opportunity transaction?
    I'll appreciate any thoughts from you. I will instantly award max points for the correct answer
    Thanks,
    -Pras

    Kai,
    Thanks for your response. I have mailed you the screen-shots of my configurations. I did not know how to pass this info via SDN, hence I mailed it directly to your e-mail ID in your profile. I am sorry if that's not the right way to approach for help.
    >>If you maintain an additional employee responsible, does it work then?
    I have set the configuration "Only Functions Assigned to procedure" for the Permitted Functions in the Partner Determination Procedure. Hence, I do not have an additional "Employee Responsible" Partner Function in my list. This is to not permit the end-user to use other Partner Functions besides the mentioned here. The client wants to make this as simple as possible without giving too many options to the end-user (sales folks).
    However, I will temporarily set this field to "All defined Partner Functions" and, enter a BP for Employee Responsible and let ytou know what I see.
    Thanks a zillion for your help.
    Thanks and regards,
    -Prashanth

  • How to configur the user to get notified when IDOC goes in to error?

    Hello Experts,
    Please tell me how to notify the users when IDOC goes in to error...
    please tell me where we can configure this thing,,
    Thanks
    Venkatesh

    Venkatesh,
    The best technique for this would be configuring Workflow. Whenever an Idoc goes into an error it will go to the specified user. You have to set it up and can have more than 1 user and also depending on what Idoc failed you can have different users.
    Example ORDERS05 failed, let it go to the inbox of the Order team , SHPORD failed , put it in the mailbox of the WM team lead etc.
    Read up the workflow documentation of SAP which is really good.
    You can do other things, like have a simple email etc. but all will need program changes.
    Usually I have seen some teams have the most simple mechanism.
    Have a peron check the Idoc that failed and then notify the teams.
    Of course 1 person can be only responsible for lets say a few Idoc types.
    I have worked in such a environment where I used to look at the Order to cash Idocs ( Orders/Invoices/bank payments etc.)
    Also you train the users to look at Idocs and recognise and fix errors, so they are not totally dependent on you.
    But Workflow is the best solution according to me.
    Regards

  • How to map Primey user when run "LDAP Import"

    Hi All
    I configure LDAP import in the [Asset Inventory] of [Configuration]. But I find I only map cn to login user.....But the login user maybe not owner (helpdesk ot proxy agent). So I maybe get the incorrect information when I run the report.
    Did anybody know How to make the Users' cn map the Primary user for getting the ocrrect information??
    Thanks!!
    wyld

    wyld,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • How i map the caf data with data of UWL in web dynpro

    Hi Experts,
    i created a bpm project with nwce 7.1.1 and it have a independent caf to keep it's data and status.
    now i have to create a view(use web dynpro) such like UWL,
    my question is
    how i map the caf data with UWL, and let the view can open the task(popup a window, just like UWL do) for user to finish their job?
    thanks.

    Hi Vic
    Your requirement is exect functionality of UWL based on WEBDYNPRO, CAF and BPM for automation? ,and question is How to use CAF with WD or CAF with UWL API's ?. please clarify it.
    Please fo through from given doc misght give u some idea
    1. [How to develop Web Dynpro UI for your CAF project |http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID0722080650DB02400261803144436507End?blog=/pub/wlg/5414]
    Best Regards
    Satish Kumar

  • How do I allow users to upload personal files through website?

    How do I allow users to upload personal files through our website?
    I am trying to allow the visitors the ability to upload images for a future contest we will be hosting. I am trying to build a submit form with personal fields (already got this done) along with a field they can upload 1 or 2 images. I want the form to send me an email with details along with image files. I have a BC webbasic+ account and I am using Muse for my web editing.
    Can someone point me in the right direction?

    Hi,
    You could apply a "file attachment" field within the web form.  If needing more than 1 file attachment you'll need to access your form code and hard-code the additional field. 
    The form will collect the file(s) and will be held within the case details under "related files".  You can also assign a workflow to recieve notifications however only 1 file will appear in each email.  To see the other files you'll need to access your order details. 
    All this can be create and managed within your site's admin.  yoursite.com/admin 
    Within the site admin...
    http://helpx.adobe.com/content/help/en/business-catalyst/using/create-insert-form.html (Creation of webform, etc)
    http://helpx.adobe.com/content/help/en/business-catalyst/sbo/customer-database.html#id_227 59 (Manage customer web form submissions)
    Hope this helps!
    -Sidney

  • How to ristric the user when data enter in lov column.

    Hi all,
    i have one page,page having lov column and submit button.
    here user select the value in to lov column and click on the submit button details ll be displayed.
    but user did not select the value in to lov means user enter the value in manually and click on the submit button at that time lov window ll be open.so how to ristric the user.plz help me its very urgent.
    Thanks
    Seshu.

    Hi,
    What is your requirement?
    You want to validate value entered by user in LOV field or not?
    If yes, then this the correct behavior.
    In no, you can disable client validations. In this case the value entered won't be validated against the LOV vo and value will be stored in the vo attribute mapped to LOV bean.
    Thanks,
    Mukesh Uchaniya

  • How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

    How to let the user define the colors for each plots in the graph (I
    use LabVIEW 7)?

    Hi,
    Take a look at this example, it uses property nodes to select tha
    active plot and then changes the color of that plot.
    If you want to make the number of plots dynamic you could use a for
    loop and an array of color boxes.
    I hope this helps.
    Regards,
    Juan Carlos
    N.I.
    Attachments:
    Changing_plot_color.vi ‏38 KB

  • How to Map the Unit field  in case of DSO and INFOCUBE

    Dear Experts,
    I have a issue ,Please help me to solve this
    I have DSO as provider ,
    And, i have to map transformations  btw the Datasource and DSO.
    In generic Data source,  i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
    and normal Quantity fields  like KWMNG,OAUME(quantity related),OAUWE (value related).
    In DSO data fields as Key figure info objects like  0Quantity (which have 0Unit as unit of measure) and some other  key figures which have there respective unit of measure in info object  definition.
    So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
    (How it will be for both DSO and Info cube is there any difference?)
    Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PM

    Navasamol ,
    If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
    what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
    And i have  seen the Quantity fields  and there respective unit fields are mapped directly  to key figure info object
    in case of Info cube . Its working fine .
    If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
    why this difference btw DSO and Info cube can any one explain me in detail.
    Expecting your valuable suggestions.
    Thanks & Regards,
    Anjunath Naidu
    Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM

  • How to change the default date in Person assignment tab?

    Hi experts,
    Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
    Thanks and rgs,
    Michelle

    Hi Michelle,
    Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
    Hope this is useful...
    Regards
    Aatish

  • How to avoid the user selecting a different path in my installer

    Hello again all you helpful forum-goers!
    I have an application and a corresponding installer, and then I have a separate installer putting some support files in the same directory.  My problem is that if the user selects a different path to which to install my primary application, the secondary installer will not put the required support files in the same spot.
    Now, I think I've figured out how to get the user-selected path from the "Run executable at the end of installation" option in the Advanced pane of the LabVIEW installer configuration, and I can pass that in to my secondary installer, and that should fix the problem.  However, what I'd really like to do is just not give the user the option to install my primary application in a different directory to begin with.  I've looked, but cannot find any way to do that.
    Does anyone know of any way to not present the option to install an application in a different directory when using the LabVIEW installer?
    Thanks in advance for any suggestions,
    -Joe

    Ben64,
    That's great!  Thank you so much for your quick reply.  The only reason I haven't already accepted that as my solution is that it requires a manual post-compile change to a text file.  Ideally I'd prefer not to have to remember to do that every time I rebuild my installer.  Is there any way that you know of to automate the process?
    If not, I'm happy to have a good solution even if it takes an extra step each time to implement.
    -Joe

Maybe you are looking for