How to solve no service in the carrier

Anyone know how to solve 'no service' in the carrier? I never do jailbreak and encounter this problems frequently. I requested to get replacement of iphone4 and stil having the same problem. I gotta reset all setting frequently as well. Is the sim card, hardware or software cause this problem?

The "No Service" message appears in the upper left corner of the display
Try toggling Airplane mode "on" and "off". Wait five seconds between the off and on modes.
If that doesn't work, try another location.
If another location works, but the original location still does not, contact your carrier to report the issue.
If the message is present in all locations, have the iPhone serviced.
Is a quote from: iPhone: Hardware troubleshooting

Similar Messages

How can unlock my Iphone if the Carrier does not offer this service?

How can unlock my Iphone if the Carrier does not offer this service?

This is an iPad forum ... for issues dealing with iPhone, go here ...
Using iPhone

How do i find out who the carrier is and can i get it unlocked to use in australia?

Hi there,
I got a iphone4 from my friend ewho brought it from someone from ebay in the states
I am unable to use the phone and was told that the phone had been updated to a baseband that can not be unlocked
and that I need to contact the carrier.
How do I find out who the carrier is and is there anyway I can get it unlocked to be used in Australia?
It has a grevey sim in it and well at this point in time its just being used as an ipod.
Yes I know I should of got one from Australia but i thought it wouldnt be this hard to get it fixed to be able to use here.
please help........
thanx
lana

The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
http://support.apple.com/kb/HT3743

How to install ftp service on the system?

OS: SuSE Linux Enterprise Server 8
How to install ftp service on the system?
How to check and modify to use it?
I am not able to use FTP.
Regards,
D

Rohit,
If its about installation/Deployment of Agent- then its through SDM,
'configuration' can be manual or Atuomatic:
Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
Thanks,
Jagan

How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?

Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916)

How to integrate Note Service with the webservice space?

Hi
Can anyone please guide me how to integrate *"Note Service"* with the webcenter spaces. I need to implement "Personal Note" in my webcenter space application. Please can anyone give me article showing step by step procedure to implemennt note service with webcenter spaces or some sample examples.
Regards
Raj

Hi
Already i have seen this document, here they did not mention how to get the "Note TaskFlow" in resource catalog. In Resource catalog I didn't find any component named "Note TaskFlow".
To make it visible in resource catalog. What should I do?
To integrate Webcenter Services(link, mail, notes, etc..) with webcenter spaces, what do i need to do? Itseems all services are in the form of taskflows. How can i make it enable and to bring it in resource catelog?
Regards
Raj

How to Enable Remote services using the GPO for the Client Machines

How to enable remote Access services on Client machines using the Group Policy. After enable how to access with out switching the users remote as administrator

Hi,
If you use windows server 2003, we can refer to the following link to enable remote access services on Client machines using the Group Policy:
Enable or disable Remote Desktop
http://technet.microsoft.com/en-us/library/cc727977(v=WS.10).aspx
If you use windows server 2008 and later version, we can refer to the following link to enable remote access services on Client machines using the Group Policy:
How to Enable or Disable Remote Desktop via Group Policy Windows 2008
http://social.technet.microsoft.com/wiki/contents/articles/4980.how-to-enable-or-disable-remote-desktop-via-group-policy-windows-2008.aspx
After you enable
Allow users to connect remotely using Remote Desktop Services policy setting, users who are members of the Remote Desktop Users group on the target computer can connect remotely to the target computer by using Remote Desktop Services.
So if you want users to access computer remotely, you need add users as members of the Remote Desktop Users group on the target computer.
About how to add users to the Remote Desktop Users group, please refer to the following link:
Configure the Remote Desktop Users Group
http://technet.microsoft.com/en-us/library/cc743161.aspx
Best Regards,
Erin

HOW I CAN FIND WICH IS THE CARRIER FOR MY IPHONE WITH IME NO

how i can find wich is original carrier for my iphone i have ime no only

Settings > General > About > Carrier
(if you still have access to the phone)

How to create a service for the OHS (Apache 2.0) on Windows?

I've downloaded the Oracle HTTP Server (Apache 2.0) (10.1.3.3.0).
It works also fine with DB 10gR2 and APEX.
But how do I create a windows service for the opmnctl.exe?
Thanks
Ralph

I've downloaded the Oracle HTTP Server (Apache 2.0) (10.1.3.3.0).
It works also fine with DB 10gR2 and APEX.
But how do I create a windows service for the opmnctl.exe?
Thanks
Ralph

How to solve "error occurred in the data manipulation engine"? 64bit Windows 7

Hi all
I'm having quite a testing time here trying to use the new SAP PA 2.0. After installation the software launches, the Automated Analytics seems to work fine but not the Expert Analytics.
Steps as follows:
Launch PA
Choose and launch Expert Analytics
Choose Try with Samples
Open the Dairy Wholesaler file
Error: An error occurred in the data manipulation engine. Check the manipulation parameters. (HDB 01001)
I also get this same error when I try to create my own New Dataset.
I’m on 64bit Windows 7 Pro
Is there anyone who knows how to solve this problem. I've searched the SCN and online and have tried the following:
1. Uninstall and re-install. Doesn't help
2. Uninstall and delete old lumira related folders on the C drive e.g. the SAPPA and SAPVI folders on the C drive, then re-install.
Much appreciated if anyone could shed some light on this. I've previously had Lumira working with no issues. I've since uninstalled Lumira, Predictive Analytics, and Infinite Insights (as PA 2.0 is all of this combined)
Regards
Ria

In case anyone has the same problem, I found the the following helpful (taken from Error after upgrading to 1.18 ). The solution is for Lumira however its the same steps for PA2
1. You might want to try a ‘clean’ uninstall / reinstall . After uninstalling, try deleting these folders:
C:\Users\Public\sapvi
C:\Users\<user>\AppData\Local\SAP\Lumira
C:\Users\<user>\AppData\Local\Temp\sapvi
In this step I searched for every SAP related file in AppData in the Public, User, and my own username folder under \Users\
2. Next, to launch the application, explicitly click "Run as Administrator" on the install file

How to enable web services for the HP envy 4500

I am settin up my new HP ENVY 4500, have the printer working to my wireless rounter but am unable to connect to web services so I can update the printer. How do I do this?

Hi,
Have you activated it yet ? Looks like the setup is not right or missing, it's not connected to the internet. Please use the following tool to run the setup:
http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can i remove services from the transient name service?

hello all..
i am using the transient name service and i would like to remove a service if a server goes down...how can i do that?

hmm the thing is were to put the statement... after the code that makes the server waits for invocations?
         synchronized(sync){
            sync.wait();
         ncRef.unbind(pathEnglishToGreek);
       what happens if the server failed/hw failure/ shutdown the machiene/ ctrl+c or sth else?

How can I cancel service during the strike?

I understand that it is not possible to cancel service online. I called the number (1-800-VERIZON) and on completion of the prompts at which I indicated I wished to cancel service I received a recording that no one is able to process the request because of the strike. I am cancelling service because I no longer wish to have a second line.
Solved!
Go to Solution.

OMG, dummy me, I changed providers the day before the strike and now I have nothing, no phone, internet, or cable. Verizon promised a connect date of 08/10 and to date I have no service and It is impossible to get through to cancel service. I did recieve a welcome package from them welcoming me and hoping I am enjoying my new services, what a joke! Just goes to show who's really running the show and not them highly paid executives, Well, strike or not, I'm cancelling my service....eventually. Our only option as I see it is to call BBC or state commissions office ; (

How to solve repeated Bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000010, 0x0000000000000002, 0x0000000000000000, 0xfffff8016a71d56c).

Log Name:      System
Source:        Microsoft-Windows-WER-SystemErrorReporting
Date:          6/25/2014 08:09:27
Event ID:      1001
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000010, 0x0000000000000002, 0x0000000000000000, 0xfffff8016a71d56c). A dump was saved in: C:\windows\MEMORY.DMP. Report Id: 062514-17078-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
    <EventID Qualifiers="16384">1001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-25T15:09:27.000000000Z" />
    <EventRecordID>18419</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Security />
</System>
<EventData>
    <Data Name="param1">0x000000d1 (0x0000000000000010, 0x0000000000000002, 0x0000000000000000, 0xfffff8016a71d56c)</Data>
    <Data Name="param2">C:\windows\MEMORY.DMP</Data>
    <Data Name="param3">062514-17078-01</Data>
</EventData>
</Event>

Hi,
Do you need any further help regarding the BSOD here?
Besides, regarding Bugcheck ID 0xD1, please see:
Bug Check 0xD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Please follow the suggestion provided by ZigZag team, upload us the dump file for further assistance.
Here for more information:
How to read the small memory dump file that is created
by Windows if a crash occurs
Best regards
Michael Shao
TechNet Community Support

Does anyone know how to solve a problem about the ...

Hi there,
I recently bought a N73 from t-mobile and it has the latest copilot on it. the problem comes when I go on Copilot it exits itself automatically and the signal does not come? why does this happen and how can you fix this?
P.S. I told T-Mobile but they don't do nothing!!!

I've just updated the nokia software on my E61i, and now my copilot does the same thing. It works until copilot tries to communicate with the GPS, then the program shuts down.

How to solve no service in the carrier

Similar Messages

Maybe you are looking for