HT201250 Circle and cross through iTunes icon afte the seagate hard drive replaced and restored data from time machine backup.

Circle and cross through iTunes icon: had the seagate hard drive replaced and restored data from time machine backup. Why does the iTunes icon have a circle and cross through it? As though incomplete? tried everything and still Circle and cross through iTunes icon.

No it isn't something you'd find on the computer, it has to be custom installed from the 10.6 installer disc or Software Update if it wasn't before.  It allows you to use older PowerPC applications on your Mac.   On the other hand double check the version of iTunes you have does not require 10.7 minimum either.

Similar Messages

  • HT201250 (1) Where is the "Time Machine menu" and the choice to "Enter Time Machine" (mentioned in the "Restoring data from Time Machine backups" section)?

    1) Where do I find the "Time Machine menu" and the choice to "Enter Time Machine" (as mentioned in the "Restoring data from Time Machine backups" section in the Mac Support article "Mac Basics: Time Machine")?
    2) How would I restore e.g. a particular photo from a backup I made with Time Machine? I can see how this is done with Word documents, but can't see how to do it with photos?

    Welcome to Apple Support Communities
    1. The Time Machine icon is on the menu bar.
    2. If you want to do that with individual photos, it's the same way as for documents. If you want to do it with iPhoto, you have to restore the whole iPhoto library, not only one photo

  • I just had the seagate hard drive replaced and the fan is running loud

    I just had the seagate hard drive replaced and the fan is running loud

    Is your iMac a late 2009 or newer model? Did Apple do the replacement or someone else? There is a documented issue where Apple changed the hard drive heat sensor from outside the drive to inside. If you install a replacement hard drive in a late 2009 or newer iMac that's not an Apple-sourced drive, two things happen ... the fan runs like crazy and the Apple hardware test doesn't work properly.
    You can read these OWCS blogs here and here on it. 

  • HT201250 Mac OS 10.6 - How to restore OS and Data from Time Machine Backup

    my exisitng iMac have a defective hard drive that i need to be replace. how do i restore the OS and data to the new hard disk? i have Time Machine backup from the previous hard disk. (note: the OS is 10.6, and i do not have the install disk)

    cindy1023 wrote:
    i had a hacker get in my computer, got all my info used my name and passwords to convert safari into windows on another computer? and APPLE IS THE ONE GAVE HER THE PASSWORD.
    There is no way to "convert" Safari into Windows.   And very unlikely for a hacker to get into a Mac. 
    But, ok, your system is all messed-up somehow.
    First, what version of OSX is on your Mac?  If you don't know, click the Apple icon at the upper-left of the screen and select About This Mac.  You'll see a display like this:
    We need the Version number.
    Second question: do you have backups made with Time Machine (on an external HD or the like) that you want to restore, or do you want to start your Mac over fresh, the way it came from the factory?
    p.s. i dont have the disc it came with , my daughter set it up for me to get started !
    You may need that, depending on what version of OSX you're running, to restore the backups or start fresh.
    You really should have a copy of the original disc, as there's an Apple Hardware Test on it, tailored to the hardware on that Mac. You'll need it it there's ever a problem.  If your daughter can't send it,  call AppleCare (800-275-2273),and  give them your serial number -- they can send you a replacement for a nominal fee.
    Sorry, but it's late here, and I'm going to bed, but will be back tomorrow.

  • Re-install OS X and restore data from Time Machine on iMac

    I have a mid-2010 iMac with 500 GB internal hard drive and OS X 10.10.3.  I also use an external 1T hard drive for additional storage.  Total usage of both these drives is 800G.  I have another external 2T hard drive that I use for Time Machine.  I want to replace the 500G internal drive with a 1T internal drive.  The new hard drive will be replaced by a local computer store (MicroCenter) and I intend on re-installing OS X and then restoring all the applications and data from the Time Machine backup from both the 500G internal and 1T external to the new 1T internal.
    Please advise on the best way to do this.

    OK so I used Migration Assistant once I knew where the old back was. Why don't all backups show when you go into Time Capsule? Wouldn't that be easier?

  • I have updated my operating system to mountain lion and all is good except my microsoft word and excel and asking me to repurchase them. They were installed over three years ago and due to my hard drive upgrade I don't have time machine backup to revert

    I have replaced my hard drive on our 27" Imac and upgraded the op system to mountain lion. Once all done and collected from apple, i have found my word and ecel have expired and are requesting me to repurcahse the items. As they were purchased almost 4 yrs ago I have no idea where the original box or codes / product key / passwords are. What can I do to get around this problem. In addition my time machine only goes back as far as the op system upgrade.
    Regards
    Tim.

    Good news - saved you a 2 hour phone call

  • How do I Play videos from external hard drive on Apple TV2?  Can I just move the iTunes Library to the External Hard Drive?

    I have several HD videos stored on an external hard drive and would like to bring them into iTunes and play them via iTunes on my Apple TV2, but I am not sure how to go about it.  I don't want to store the movies on my iMac hard drive because it would eat up to much space...so do I just move the iTunes Library to the external hard drive?  And, if so...will the Apple TV2 find the iTunes Library on the external hard drive?  Thanks for any help anyone can suggest.

    iTunes content on an external drive isn't a problem.
    The simplest method is to just move your library to an external drive.
    If you wanted to keep just movies on an external drive, that's a little more difficult. You'd need to put the movies where you want them to reside on the external drive and add drag and drop them onto iTunes while holding down the option key. Obviously any movies already in iTunes would need moving from their current location and removing from iTunes first.

  • ITunes restore from Time Machine backup

    Hi my iMac HD failed and it's been replaced.  I've managed to restore all my data from Time Machine backups except my iTunes Library, Aperture Library and iPhoto library.  How do I restore the settings, playlists, apps, etc in iTunes from Time Machine? 
    Thanks! 

    patdpoo wrote:
    Hi Chris!  I tried the Migration Assistant and it failed.  I'm guessing my computer went into sleep mode.  I decided to do some deep cleaning and went into Time Machine and only backing up some things I really wanted.
    You backed up (added to Time Machine) only certain things or you restored (put back onto yrou HD) only certain things?
    If everything is in Time Machine, open it, select the /Music/iTunes/ folder then Restore.
    Same with iPhoto and Aperature.

  • HT201250 Restore playlist to iTunes from Time Machine backup

    I need to restore my playlist to iTunes from Time Machine backup. Anyone know how?

    cindy1023 wrote:
    i had a hacker get in my computer, got all my info used my name and passwords to convert safari into windows on another computer? and APPLE IS THE ONE GAVE HER THE PASSWORD.
    There is no way to "convert" Safari into Windows.   And very unlikely for a hacker to get into a Mac. 
    But, ok, your system is all messed-up somehow.
    First, what version of OSX is on your Mac?  If you don't know, click the Apple icon at the upper-left of the screen and select About This Mac.  You'll see a display like this:
    We need the Version number.
    Second question: do you have backups made with Time Machine (on an external HD or the like) that you want to restore, or do you want to start your Mac over fresh, the way it came from the factory?
    p.s. i dont have the disc it came with , my daughter set it up for me to get started !
    You may need that, depending on what version of OSX you're running, to restore the backups or start fresh.
    You really should have a copy of the original disc, as there's an Apple Hardware Test on it, tailored to the hardware on that Mac. You'll need it it there's ever a problem.  If your daughter can't send it,  call AppleCare (800-275-2273),and  give them your serial number -- they can send you a replacement for a nominal fee.
    Sorry, but it's late here, and I'm going to bed, but will be back tomorrow.

  • I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

    I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

    http://support.apple.com/kb/HT1449

  • HT1553 I want to do a clean install of Mountain Lion. Can I do this without a DVD version of the OS, and can I restore only specific things like iPhoto and iTunes libraries from Time Machine backup.

    I want to do a clean install of Mountain Lion. Can I do this without a DVD version of the OS, and can I restore only specific things like iPhoto and iTunes libraries from Time Machine backup.

    Mountain Lion is only available as a download, so there is no DVD to purchase. What you can do is download ML and then stop it from installing as soon as it's on your drive. From there you can make your own bootable ML flash drive.
    When your purchase and download Mountain Lion, it will end up in the Applications folder and automatically want to install. Press Command+Q to stop the install and exit. The installer will remain on the hard drive.
    1) Right click on the installer and choose "Show Package Contents".
    2) A folder will open on the desktop. Drill down to Contents > SharedSupport and double click the disk image InstallESD.dmg to mount it on the desktop.
    3) From here you can either burn a DVD, or copy the contents to a flash drive. Personally, I would strongly suggest using an 8 GB flash drive formatted as Mac OS Extended. You will be able to boot to it in about 30 seconds instead of at least 10 minutes off of a DVD, and it will install MUCH faster. Make sure the flash drive is empty, or you've copied anything off it it you need as it will need to be erased.
    4) Don't just drag and drop the contents you see in the open disk image to the flash drive. It won't boot that way as it will be missing some hidden files. Open Disk Utility. You will something similar to this:
    5) To accomplish the above, highlight either the flash drive's single partition (as I did), or the item at the bottom (Mac OS X Install ESD), which is what you will see with the Lion disk image mounted. It doesn't matter which one you pick. You'll then have the option to select the Restore tab towards the upper right. Drag and drop from the left column into the Source and Destination fields as shown above. If you've already erased the flash drive, you can uncheck the box. Click the Restore button.
    You've just made your own bootable Mountain Lion USB Flash drive installer. Once you boot to the flash drive, run Disk Utility first to erase the drive you want Mountain Lion on, then continue with the install.
    As far as restoring your iPhone and iTunes libraries, I couldn't tell you. So I wouldn't do any of the above until someone else chimes in with a way to do that after a clean install of ML.

  • I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty.  No music, movies etc are there.  Please help thanks

    I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty.  No music, movies etc are there.  Please help thanks

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Windows images, but you get the point. Depending on the age of your library the library file might not include the .itl extention. Make it match the file you are replacing.
    See MusicFolder Files Not Added and Super Remove Dead Tracks for tools to catch up with any changes since the backup file was created.
    tt2

  • New iMac. Flash drive is primary for OS and apps.  I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files.  Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

    New iMac. Flash drive is primary for OS and apps.  I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files.  Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

    Yes.  Unfortunately, I don't know the specifics because I don't use iPhoto anymore and I completely copied over 15 years of MP3 files recently when I installed 10.7.  Needless to say, I have not opened iTunes since and probably never will again - not because of iTunes but because of my stupidity.  I did have some of the files backed up but I hadn't backed up in a while.......anyway....
    When I imported my CD's, I had them go directly to my external firewire.  I can't remember exactly how to set it, but in the preference section of iTunes you can specify an import destination to any drive that's available to your machine.  I did this with iPhoto as well way back at one point when I was using Tiger, but I don't remember the specifics on that either.  I can't imagine they would have discontinued support for that feature since then. 
    Sorry I couldn't help more.

  • HT201250 How do I restore photos from Time Machine?  All of my photos have been imported within iPhoto and therefore are exported to Time Machine via an iPhoto file.  I can't figure out how to break individual photo files out of the iPhoto file.  Any idea

    How do I restore photos from Time Machine?  All of my photos have been imported within iPhoto and therefore are exported to Time Machine via an iPhoto file.  I can't figure out how to break individual photo files out of the iPhoto file.  Any ideas?

    You might post this query on the iPhoto forum and perhaps someone there can provide an answer.
    I tried this on my MBP and it seems that you have to restore the entire iPhoto Library.  What I did was put the current library in a separate folder on the desktop and then I restored the library from a prior date.  If you were to do that, you then could extract the desired photos and then delete the restored library.  Then place the current library back to the original location and import the desired photos.
    Not tidy but it seems it will work.
    Ciao.

  • I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?

    I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
    Where do I find this library?
    thanks
    Shak

    Twas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
    Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
    Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
    (1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
    If that doesn't work
    (2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
    If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
    From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
    This may take a while. Once completed, re-open iPhoto.
    And that should (I stress should) cure it.
    Good luck.

Maybe you are looking for

  • Uploading an image in interactive report APEX 4.0

    Hi, I hope you can help me. I am using the book "Begining ORACLE APEX", which is for APEX 3.1.2, to learn APEX. Now, I use the online APEX 4.0. In the 6th chapter one should add new columns to the PRODUCTS table: one for the PRODUCT_IMAGE, a BLOB col

  • Me2dp purchase order downpayment request amount error

    Dear All: I use the me2dp to monitoring the downpayment request of the purchase order. And  I finded a probelm I have create a downpayment request use me2dp, the amount is 200. The total of downpayment requests amoun is 200 if I run the me2dp report.

  • Production Order in REM

    Experts, I found that even if the material (Fert) is having REM scenario set up, it is possible to create production orders for the same material. One of the material is having MTS REM scenario for which production is driven by planned Orders(run sch

  • Right aligning one item in a VerticalLayout container?

    Hi All, I've got a container with a VerticalLayout.  I want all of the items to be left-aligned, except for the first one, which I want to be right-aligned. Is there a way to make that first item right-aligned?  If this were HTML I might put float:ri

  • SAP Bex Query Line items

    Hi All, I need to display Lines like below at Query level. Existing : SC Number                 Line Item 100000                          1 100000                          3 100000                          5 100002                          1 100002