HT201263 My iPhone is disabled and I don't know the passcode. I tried connecting it to iTunes but it gives me the following message: "iTunes could not connect to the iPhone "xxs" because it is locked with a passcode. You must enter your passcode on the iP
I got my passcode changed but I don't know it. My iPhone is disabled and iTunes can't connect to it because it tells me I need to enter the passcode. My phone says "try again in 48 minutes". Can anyone help me?
Hello iAwesomeness-,
We've an article that provides your available options and the relevant steps for restoring access to your iPhone.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Allen
Similar Messages
-
My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks
You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808
-
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
I am trying to use Itunes to move my data from my iphone 4s that was backed up on my Macbook Pro. I keep getting an error code backing up from ITunes to new Iphone 5s:iTunes could not back up the iPhone “Karen’s iPhone” because it is locked with a passcode. You must enter your passcode on the iPhone before it can be backed up. On the Iphone it keeps telling me to add another network. I have put our home network on the Iphone. When I put the passcode in the phone does not give me enough time to put my Apple ID password in and it shuts off. Help!
<Email Edited by Host>FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
iTunes could not connect to the iPhone “Rasmus's iPhone” because it is locked with a passcode. You must enter your passcode on the iPhone before it can be used with iTunes. - Why is that?
iTunes is asking you to provide the passcode that was created when the device was activated.
You are able to get around the passcode if you know the apple id login and password and are able to restore the device back to default settings.
See this article for further directions:
http://support.apple.com/kb/HT1212
good luck. -
My Ipod Touch is disabled and when I connect to Itunes to recover it, it states that itiTunes could not connect to the iPod touch “iPod touch” because it is locked with a passcode. You must enter your passcode on the iPod touch before it can recover.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
itunes could not command to the iphone because it is locked with a password. You must enter your password on the iphone before it can be used with itunes
Did you try entering your passcode on the phone?
-
I got the message copied below in iTunes but I still need to keep my pics and videos. Passcode has been wrongly entered 100 times by my little chiled. Is it possible to still keep the data?
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."PHONE LOCKED
If your phone is locked because you have incorrectly entered the unlock passcode too many times then follow the steps in this article http://support.apple.com/kb/ht1212 -
I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
ipod touch..when I plug in to laptop, itunes comes up and I get this message. "Itunes could not connect to thehe Ipod because it is locked with a passcode. You must enter your passcode on the ipod b/4 it can be used with Itunes" It is stuck on the cord/itunes screen and cannot go any further...HELP
Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.
-
I have a 3rd generation i-pod touch ......cant get the slider to slide to put the passcode in .....the message says (i-tunes cant connect to the i-pod because it locked with a passcode ,you must enter your passcode on it before it can be used.)...... I cant slide the slider to put the passcode in what to do?
iOS: Unable to update or restore
-
I am trying to restore my son's iPod Touch 4th generation. I went about 20 minutes into the recovery process and got the error message, iTunes could not connect to iPod because it is locked with a passcode you must enter your passcode on iPod before it can be used with iTunes. The whole problem started with my son putting in a password that he has now forgotten. How do I get passed this?
its the 1st time ive heared of this
can u link it to an computer to add music?
if so you should be able to restore it
connect to itunes under the devices tab click on the ipod now click summary on the top
on the page you should see and check for update's or update tab
below that there should be an restore tab just click on the restore tab
NOTE RESTOREING WILL DELETE EVERYTHING YOU ADDED TO THE IPOD AND IT WILL BE BACK TO FACTORY SETTINGS -
"itunes could not connect to the ipod becasue it is locked with a passcode. You must enter your passcose on the ipod before it can be used" BUT i cant unlock it and i dont have the original itunes that is was hooked up with before either. HELP! It wont let me restore because it is locked. I cannot unlock it. I have tried everything online. nothing works.
Place the iPod in recovery mode and then restore the iPod to factory defaults/new iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
my ipad has a passcode but i forgot it and i tried many times and it says "Ipad is disabled connect to itunes" so i did that and it pops up and says "you must enter your passcode to access this itunes account"
THave you looked at this link http://support.apple.com/kb/HT1212
Maybe you are looking for
-
Mac pro / Laserjet 4 / Os 10.6 - how do I make the printer work?
Hi, I have a 2008 Mac Pro running 10.6.8 and an ancient yet still thriving HP Laserjet 4 that I was using over an ethernet/Jetdirect connection with my G5 for years - how do I get them to talk to each other? I'm running the printer connection throug
-
I have a macbook air running on OS X 10.5.8. I wish to run on the new mountain lion. I realise that i am currently on leopard which means i have to upgrade to snow leopard or lion before i can get mountain lion. However because i am on leopard, i hav
-
How do I convert my iphone videos (.mov) to .flv files?
How do I convert my iphone video (.mov) to .flv files?
-
What a good email program for the Mac?
I can't use Mac mail anymore because Comcast (or somebody) has blocked some ports and Comcast can't tell me what the problem is. The problem seems to be with ingoing and outgoing ports but Comcast no longer shows an ougoing port in preferences so I c
-
Recently, I get this java error message whenever I open Firefox. Please advise.
Since I'm not able to past the error screenshot... JavaScript Application Error TypeFace: netscape.security.Privilege Manager is undefined.