I finally got eprint to work but green light goes off after about 15 min

Can't get green light to stay on.

Ruth, welcome to the forum.
You did a nice job of diagnostics. Thank you for the detailed information.
I suggest testing the memory. The specifications say that there is 1x2 GB and 1x4 GB (= 6 GB). Remove all of the memory and replace each module one at a time and boot. The single module should be installed in the slot nearest to the Processor.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

I hooked up mine and finally got it to work but every once in a while my web browser get stuck. how di fix this?

i hooked up mine airport and finally got it to work but every once in a while my web browser gets stuck. how di fi?

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

4S goes blank, thought battery low, finally got it to work but quits on its own. Any ideas?

I need some ideas. 4S turns on/off at random. If I hold on button down it reloads which seems to have stopped working. I plugged it into computer and am at the point of reloading software. I have iPad and ICloud, will I loose all of my information if I download?

Hello Dobby554,
I would be concerned too if my iPhone was shutting down unexpectedly. I found an article with some steps to take when you encounter an issue like this:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
You also mentioned that you were not sure if the data will be lost if you restore your iPhone. You will need to backup your data before you restore your device so that you can restore the backup:
You can find steps for backing up and restoring your iPhone in the following links:
iOS: How to back up
http://support.apple.com/kb/HT1766
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thank you for using Apple Support Communities.
Best,
Sheila M.

My new Westell Modem/Router will work as homenetwork, DSL light works but internet Light is off.

Hello, i recently recieved a new modem/router from verison tech support. Its a newer model adsl2+. Well it will work as a router but won't connect any devices to the internet. The DSL light lights up but the internet does not. It says the same then when i connect it to my other router. The devices are connected, but not to the internet. Please Help. Thanks.

Perhaps this may help you
http://www.dslreports.com/faq/13600
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

TS1591 i just got an ihome system and had trouble with it connecting to my iPhone. I finally got it to work and now my itunes doesn't recognize my phone. My software is up to date on both my Mac and my iPhone and I have shut everything down and restarte

i just got an ihome system and had trouble with it connecting to my iPhone. I finally got it to work and now my itunes doesn't recognize my phone. My software is up to date on both my Mac and my iPhone and I have shut everything down and restarted. Does anyone have any other suggestions?

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Audigy 2 ZS, Vista x64: Finally got bass redirection working!

=Audigy 2 ZS, Vista x64: Finally got bass redirection working!B Hey guys,
I have hooked a Teufel Concept G to my Audigy 2 ZS. The Speakers do not have internal cross mix, so unless the sound card provides a bass signal there will be NO bass at all. This has not been a problem under linux, since it automatically configures the sound card to send out bass, but very frustrating in Windows Vista x64. GTA4 is no fun without bass ;-)
After endless searching and messing with different drivers (breaking the whole vista sound system) I coincidently got bass redirection (and CMSS2 apparently) working today.
These are the steps I took:
. Fresh install of Windows Vista x64
2. Installation of Audigy 2 drivers provided by WindowsUpdate, did not download from Creative Labs
3. Use an old CtPanel-App which actually could activate bass redirection and CMSS2?
I uploaded the App:?
http://www.megaupload.com/?d=L6J0ZJVA
If you start the App it will take ages until it pops up, but then it works just fine. Feedback appreciated!
regards
Tiedemate?

I also have the same problem, sound stop working after getting SP2, I updated vista to SP2 because I want to update to windows 7, with win 7 I have try all the drivers without success I still have no sound and with some drivers I get a blue screen. After 2 restarts windows 7 ask me to fix the problem with restore and vola everything works ok but no sound.
I am trying this:
http://forums.creative.com/showthread.php?=35324

Almost got VPN to work, but Auth failing?

Hi,
I almost got VPN to work, but I have one last error. Here is, what I did so far:
1.) Configured VPN via Server app
2.) Enabled PPTP like described in Apple support doc
3.) VPN Server is reachable within my home network
4.) VPN Server is reachable from outside my home network
I'd be more than happy if anyone could provide me with some hints on how to fix either of the following two errors
When I try to connect via L2TP (From in- or outside the network), I get the following error:
Aug 29 22:42:17 server racoon[164]: Connecting.
Aug 29 22:42:17 server racoon[164]: IPSec Phase1 started (Initiated by peer).
Aug 29 22:42:17 server racoon[164]: IKE Packet: receive success. (Responder, Main-Mode message 1).
Aug 29 22:42:17 server racoon[164]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
Aug 29 22:42:17 server racoon[164]: IKE Packet: receive success. (Responder, Main-Mode message 3).
Aug 29 22:42:17 server racoon[164]: IKE Packet: transmit success. (Responder, Main-Mode message 4).
Aug 29 22:42:17 server racoon[164]: IKE Packet: receive failed. (Responder, Main-Mode Message 5).
Aug 29 22:42:20 server racoon[164]: IKE Packet: transmit success. (Phase1 Retransmit).
Aug 29 22:42:20 server racoon[164]: IKE Packet: receive failed. (Responder, Main-Mode Message 5).
Aug 29 22:42:23: --- last message repeated 1 time ---
Aug 29 22:42:23 server racoon[164]: IKE Packet: transmit success. (Phase1 Retransmit).
Aug 29 22:42:23 server racoon[164]: IKE Packet: receive failed. (Responder, Main-Mode Message 5).
Aug 29 22:42:26: --- last message repeated 1 time ---
Aug 29 22:42:26 server racoon[164]: IKE Packet: transmit success. (Phase1 Retransmit).
Aug 29 22:42:26 server racoon[164]: IKE Packet: receive failed. (Responder, Main-Mode Message 5).
Aug 29 22:42:38: --- last message repeated 1 time ---
Aug 29 22:42:38 server racoon[164]: IKE Packet: transmit success. (Phase1 Retransmit).
Aug 29 22:42:38 server racoon[164]: IKE Packet: receive failed. (Responder, Main-Mode Message 5).
However, when I try to connect via PPTP (no matter if from in- or outside my network), I see the following error:
Aug 29 22:27:18 server pppd[16843]: The remote system is required to authenticate itself
Aug 29 22:27:18 server pppd[16843]: but I couldn't find any suitable secret (password) for it to use to do so.
Aug 29 22:27:18 server vpnd[16413]: --> Client with address = 192.168.1.226 has hungup

I have not yet tried the VPN server in Lion, but I would normally associate IKE traffic with L2TP style VPN connections and not PPTP connections. This might indicate the remote client is trying to make an L2TP connection and you have not yet setup that properly with the same shared secret password at both ends (this different the actual users login password).
Or of course you can correct the remote client and set it to use PPTP.

X1 Carbon integrated camera working but not showing any image after Windows 8.1 upgrade

Good afternoon, sundely after I upgraded Windows to version 8.1 64x my integrated camera stopped sending image to any program that uses it, the green light goes on but there is no image. Before worked just fine.I have tried to uninstal and install again camera drivers, installed Lenovo dependency package, etc....no solution.Please help?Thanks Sergio

I resolved my issue by going to device manager selected View then View Hidden Devices.
Expand System Devices
Found two IWD BUS devices and one had the yellow triangle. I uninstalled that item and restarted my Carbon X1 and the error was gone. The original working IWD BUS remains active.

Autofill won't work but it is checked off.

Autofill won't work but it is checked off. I went through the normal steps to try to fix it. it used to work and suddenly stopped.

Explain what you mean by "still won't work." State everything you did to activate it and what exactly happens when you try to use it.
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime and iMessage activation
Message was edited by: modular747

My appears to be working but amber light flashes

Just bought an airport extreme to improve my wifi for my apple tv and iPad it seems to work but the light keeps flashing amber.
Any ideas?

The flashing amber light indicates that a setting needs to be adjusted or there might be firmware update for the product.
What operating system are you using on the computer that you used to configure the AirPort Extreme?
If you have a Mac, and you are not sure....
Click the Apple icon in the extreme upper left hand corner of the screen and then click About This Mac to see the OS X version number.

Got power on firewire - but the mac is off ...

got power on firewire - but the mac is off ...
bought a used mac pro 3.1 - i switched it off - but on all firewire units is still power ???
sound strange ?

It's supposed to do that. Click here for more information.
(124515)

TS3048 Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

Try resetting the PRAM and SMC. Try making the device a favorite .
Barry

My/keyboard/green/light/goes/out/and/the/space/bar/and/caps/lock/keys/donot/work /.I/have/100%/battery/life.I/show/connected/to/bluetooth.Anyone/know/the/approxi mate/life/of/a/keyboard?Mine/is/about/4/years/old.Using/an/iMac/about/4/years/ol d,too.

My/keyboard/green/light/goes/on/and/off./The/space/bar/and/caps/lock/keys/do/not /work/.I/have/100%/battery/life.I/show/connected/to/bluetooth.Anyone/know/the/ap proximate/life/of/a/keyboard?Mine/is/about/4/years/old.Using/an/iMac/about/4/yea rs/old,too.

Could be an early retirement problem. There is no fixed lifespan for anything, as you know. Find a friend with a keyboard and test that in your machine. That will show if it is your keyboard or your computer. We can progress from there.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

Apple TV status light goes off by itself,power cord is on but I'm not watching ATV programes ,I'm just watching tv show on my HD TV.can anyone help?

Apple TV status light goes off while I was watching tv show on my HD TV not Apple TV .the Apple TV power cord is on,I need to switch the power on and off then the status light goes on again on Apple TV is this normal?

i need to turn the power on and off and then the status light come back but if im watching movie or airplay it working fine.if im not watching anything on apple tv but some show on my tv then it happen.

I finally got eprint to work but green light goes off after about 15 min

Similar Messages

Maybe you are looking for