TS3048 Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.
Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.
Try resetting the PRAM and SMC. Try making the device a favorite .
Barry
Similar Messages
-
TS3048 my magic mouse does not want to right click anymore?
My magic mouse does not seem to right click anymore, any suggestions? For example, I used to right click on my icon of my memory card from the camera that I have inserted into the side of the IMac and I could choose "eject" now it doesn't want to right click and open up those options. Am I doing something wrong?
Hey.
This seems to be a common issue.
I've seen mixed posts on the net about the ES8000 working with the Apple Keyboard but from what I've seen the Apple mouse tends to fail the sync constantly.
Sad, I just bought a mouse to improve navigasting on the ES8000 and dissapointed that it doesn't sync. Maybe an issue with drivers on the TV.
Which Dell mouse (model number) works for you? -
Wireless mouse does not work after installing new batteries
I have a PowerBook G4 and have been using a wireless mouse and keyboard. The batteries needed to be replaced in my mouse. I successfully installed new batteries. The mouse will turn on. The LED blinks. But the mouse is not functioning. I must use the finger pad on the machine. I double checked the battery installation and even set-up the mouse as a device again. When I turn the mouse off, I get a "connection" lost window on the screen. I have tried
clicking the mouse to re-establish connection with no luck.
Any suggestions?http://docs.info.apple.com/article.html?artnum=86468
I had the same problem today - go to the above URL and follw precisely the instructions - after you delete the current mouse settings from your bluetooth preferences - apparently you have to sometimes reinstall the mouse after changing batteries - however I changed them before and did not need to do this
hope this helps -
Warning! Songs were removed from iTunes Library after installing new iTunes and iPad/iPod Sync
I purchased the iPad 2 yesterday, updated my itunes software, and itunes messages indicated that it would not allow certain songs to be included in my library any longer since these were not purchased from iTunes. Many of the songs were from CDs that I stored on this library for several years. Only after I upgraded iTunes with this new iPad was my music removed. Luckily I still have my music on my iPod, but my iTunes library on my laptop contains only the music I have purchased from iTunes with the last 18 months. Weirdly, except for one particular song that iTunes said was not purchased from them, but it was part of an entire album purchase from iTunes. Also, all of the movies I purchased from iTunes were also removed. I am not able to sync any movies onto my iPad.
I restored the iPad a second time, reinstalled the itunes and have the same result. All of my older archived music is gone from the iTunes library.
Warning, if you want your music, back it up before installing the latest iTunes particularly if you have the new iPad 2.Hmm, it is only very recently (about 6 months ago I think) that the policy on Music changed. Prior to that you would be routinely reminded to back up all purchases (immediately after the successfully completed download), unless of course you ticked an option not to be reminded again. The change in policy (in our favour) would have been noted in the small print that neither you or I read when upgrading iTunes, though we say that we have.
Again I'm still not certain if audiobooks are excluded from both "Music" and "Books". One would hope that they belonged to one category or the other in respect of redownloading. In the past, in the event of an absolute disaster, fatal hard-drive crash, fire etc. some users have been able to prevail upon the charity of the iTunes store staff who would occasionaly grant a second, but never a third, download of past purchases.
The restictions on different types of media are ultimately imposed by the rights holders, not Apple. It is in Apple's interests to offer the same terms as their competitors, so my guess is that nobody currently offers unlimited repeat downloads of movies. Certainly the unique codes you get on some DVDs/Blu-Rays are one-time only.
Backup all (or at least the non-replaceable parts) of your library with this User Tip.
tt2 -
My computer now has the 'new scan' and 'accept' buttons on top right corner & does not scan
my computer crashed. I re-installed my PSC 1510 drivers( updated from the HP web site) and when I hit the scan button, the 'new scan' and 'accept' icon appear in the top right corner of my monitor(they use to be on the bottom right corner) and the scanner does not respond. Even if I hit the new scan button, nothing happens. Any ideas what to try next? Thanks
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
After installing Firefox 3.6.13 (auto install) I am getting the following error if I open a page with-in
About Blank page - clicking on it give this detals
"This website does not supply identity information.
The connection to this web site is not encrypted"You can set the <b>browser.urlbar.formatting.enabled</b> pref to <i>false</i> on the <b>about:config</b> page to disable the highlighting of the domain and see the full URL more clearly.
You can set the <b>browser.urlbar.trimURLs</b> pref to <i>false</i> on the <b>about:config</b> page to see the http: protocol on the location bar and in the pop-up if you hover a link.
*https://developer.mozilla.org/en/Mozilla/Preferences/Preference_reference/browser.urlbar.formatting.enabled
*https://developer.mozilla.org/en/Mozilla/Preferences/Preference_reference/browser.urlbar.trimURLs
*https://support.mozilla.org/kb/Site+Identity+Button
*http://blog.mozilla.org/ux/2012/06/site-identity-ui-updates/ -
Just bought a new 4th gen iPod Shuffle for my kid. Problem is I cannot do the initial set up, as the device does not show up on iTunes on my PC. Also the charging does not light up. Any ideas on what could be wrong, as I am able to see both my iphone and iPad on iTunes using the same PC?
I also tried manually underlining a few things on the new iPad and when highlighting a paragraph, it would skip a few lines and the line would go through a few as well. Looks like a major iBooks glitch needs to be addressed here.
-
Slow Boot Times after installing new SSD and Lion
Can anyone please help interpret why I'm having slow boot times? I have copied my console printout during the boot and it seems to be doing a repetitive action while booting.
Thanks
13-01-04 2:50:24.000 AM bootlog: BOOT_TIME 1357293024 0
13-01-04 2:50:25.000 AM kernel: Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
13-01-04 2:50:25.000 AM kernel: vm_page_bootstrap: 942160 free pages and 32688 wired pages
13-01-04 2:50:25.000 AM kernel: kext submap [0xffffff7f80736000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000736000]
13-01-04 2:50:25.000 AM kernel: zone leak detection enabled
13-01-04 2:50:25.000 AM kernel: standard timeslicing quantum is 10000 us
13-01-04 2:50:25.000 AM kernel: mig_table_max_displ = 73
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
13-01-04 2:50:25.000 AM kernel: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for TMSafetyNet
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Sandbox
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
13-01-04 2:50:25.000 AM kernel: calling mpo_policy_init for Quarantine
13-01-04 2:50:25.000 AM kernel: Security policy loaded: Quarantine policy (Quarantine)
13-01-04 2:50:25.000 AM kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
13-01-04 2:50:25.000 AM kernel: The Regents of the University of California. All rights reserved.
13-01-04 2:50:25.000 AM kernel: MAC Framework successfully initialized
13-01-04 2:50:25.000 AM kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
13-01-04 2:50:25.000 AM kernel: IOAPIC: Version 0x11 Vectors 64:87
13-01-04 2:50:25.000 AM kernel: ACPI: System State [S0 S3 S4 S5]
13-01-04 2:50:25.000 AM kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
13-01-04 2:50:25.000 AM kernel: [ PCI configuration begin ]
13-01-04 2:50:25.000 AM kernel: console relocated to 0xf10010000
13-01-04 2:50:25.000 AM kernel: PCI configuration changed (bridge=1 device=1 cardbus=0)
13-01-04 2:50:25.000 AM kernel: [ PCI configuration end, bridges 5 devices 24 ]
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagement: (built 16:32:09 Aug 23 2012) initialization complete
13-01-04 2:50:25.000 AM kernel: mbinit: done [64 MB total pool size, (42/21) split]
13-01-04 2:50:25.000 AM kernel: Pthread support ABORTS when sync kernel primitives misused
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: TBIOBlockStorageDriver: super::probe failed
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless kmod start
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
13-01-04 2:50:25.000 AM kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
13-01-04 2:50:25.000 AM kernel: AppleIntelCPUPowerManagementClient: ready
13-01-04 2:50:25.000 AM kernel: BTCOEXIST off
13-01-04 2:50:25.000 AM kernel: wl0: Broadcom BCM432b 802.11 Wireless Controller
13-01-04 2:50:25.000 AM kernel: 5.106.198.19
13-01-04 2:50:25.000 AM kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID e80688fffec0e9d0; max speed s800.
13-01-04 2:50:25.000 AM kernel: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
13-01-04 2:50:25.000 AM kernel: com_seagate_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: com_maxtor_IOPowSec00_10_5: GetVendorAndModelIDInfo failed
13-01-04 2:50:25.000 AM kernel: rooting via boot-uuid from /chosen: 1052015E-B101-3046-8932-5C6B1E6A7995
13-01-04 2:50:25.000 AM kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13-01-04 2:50:25.000 AM kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/M4-CT256M4SSD2 Media/IOGUIDPartitionScheme/Imipenem (SSD)@2
13-01-04 2:50:25.000 AM kernel: BSD root: disk0s2, major 14, minor 2
13-01-04 2:50:25.000 AM kernel: Kernel is LP64
13-01-04 2:50:25.000 AM kernel: [IOBluetoothHCIController::setConfigState] calling registerService
13-01-04 2:50:25.133 AM com.apple.launchd: *** launchd[1] has started up. ***
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.powerd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.491 AM com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
13-01-04 2:50:25.987 AM UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
13-01-04 2:50:25.990 AM UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.991 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:25.992 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
13-01-04 2:50:26.000 AM kernel: BCM5701Enet: Ethernet address c4:2c:03:01:22:c1
13-01-04 2:50:26.000 AM kernel: AirPort_Brcm4331: Ethernet address f8:1e:df:eb:b4:37
13-01-04 2:50:26.000 AM kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13-01-04 2:50:26.000 AM kernel: IO80211Interface::efiNVRAMPublished():
13-01-04 2:50:27.025 AM airportd: _processDLILEvent: en1 attached (down)
13-01-04 2:50:27.274 AM com.apple.SecurityServer: Session 100000 created
13-01-04 2:50:27.000 AM kernel: in func createVirtualInterface ifRole = 1
13-01-04 2:50:27.000 AM kernel: Created virtif 0xffffff800bdffa00 p2p0
13-01-04 2:50:27.349 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
13-01-04 2:50:27.607 AM com.apple.SecurityServer: Entering service
13-01-04 2:50:27.749 AM UserEventAgent: ServermgrdRegistration cannot load config data
13-01-04 2:50:27.779 AM UserEventAgent: get_backup_share_points no AFP
13-01-04 2:50:28.000 AM kernel: NVDANV50HAL loaded and registered.
13-01-04 2:50:28.000 AM kernel: Previous Shutdown Cause: 5
13-01-04 2:50:28.000 AM kernel: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
13-01-04 2:50:28.000 AM kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
13-01-04 2:50:28.332 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.333 AM com.apple.launchd: (com.sec.faxdb[73]) open("/Library/Logs/Samsung/MacFax/FaxDB.log", ...): No such file or directory
13-01-04 2:50:28.347 AM com.apple.pfctl: No ALTQ support in kernel
13-01-04 2:50:28.347 AM com.apple.pfctl: ALTQ related functions disabled
13-01-04 2:50:28.363 AM com.apple.launchd: (com.sec.faxdb[73]) posix_spawn("/Library/Printers/Samsung/Fax/FaxDB/faxdbd", ...): No such file or directory
13-01-04 2:50:28.385 AM com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb[73]) Exited with code: 1
13-01-04 2:50:28.385 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 300 seconds
13-01-04 2:50:28.606 AM mDNSResponder: mDNSResponder mDNSResponder-320.16 (Jul 19 2012 21:07:07) starting OSXVers 11
13-01-04 2:50:28.704 AM com.apple.revisiond: 2013-01-04 02:50 revisiond[52] (CarbonCore.framework) implementation_callback_rpc: ERROR: CFDictionaryGetValue(FSEvents_streamDict, cfPortNumber) => NULL
13-01-04 2:50:28.705 AM com.apple.usbmuxd: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
13-01-04 2:50:28.814 AM configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
13-01-04 2:50:28.814 AM configd: DHCP en1: INIT-REBOOT transmit failed
13-01-04 2:50:28.837 AM systemkeychain: done file: /var/run/systemkeychaincheck.done
13-01-04 2:50:28.880 AM mds: (Normal) FMW: FMW 0 0
13-01-04 2:50:28.938 AM mDNSResponder: D2D_IPC: Loaded
13-01-04 2:50:28.938 AM mDNSResponder: D2DInitialize succeeded
13-01-04 2:50:28.990 AM configd: setting hostname to "Karr-Hong-Lees-MacBook-Pro.local"
13-01-04 2:50:29.000 AM kernel: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
13-01-04 2:50:29.000 AM kernel: DSMOS has arrived
13-01-04 2:50:29.000 AM kernel: macx_swapon SUCCESS
13-01-04 2:50:29.031 AM configd: network configuration changed.
13-01-04 2:50:29.984 AM loginwindow: Login Window Application Started
13-01-04 2:50:30.091 AM com.apple.launchd: (com.sec.faxdb) Throttling respawn: Will start in 299 seconds
13-01-04 2:50:30.142 AM netbiosd: Unable to start NetBIOS name service:
13-01-04 2:50:31.000 AM loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
13-01-04 2:50:31.000 AM kernel: en1: 802.11d country code set to 'US'.
13-01-04 2:50:31.000 AM kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
13-01-04 2:50:31.282 AM loginwindow:
O3REQUIRE FAILED: ret == 0
- file: /SourceCache/BezelServices/BezelServices-232.3/Utilities/Utilities.c
- line: 91
13-01-04 2:50:31.282 AM loginwindow: Failed to lookup Bezel UI Server port: Bootstrap Unknown Service.
13-01-04 2:50:31.315 AM com.apple.SecurityServer: Session 100004 created
13-01-04 2:50:31.317 AM loginwindow: Login Window Started Security Agent
13-01-04 2:50:31.347 AM com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.542 AM SecurityAgent: Echo enabled
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.574 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:31.575 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 10)
13-01-04 2:50:32.000 AM kernel: MacAuthEvent en1 Auth result for: a8:39:44:57:2c:50 MAC AUTH succeeded
13-01-04 2:50:32.000 AM kernel: wlEvent: en1 en1 Link UP virtIf = 0
13-01-04 2:50:32.000 AM kernel: AirPort: Link Up on en1
13-01-04 2:50:32.000 AM kernel: en1: BSSID changed to a8:39:44:57:2c:50
13-01-04 2:50:32.530 AM airportd: _doAutoJoin: Already associated to “TELUS3939”. Bailing on auto-join.
13-01-04 2:50:33.000 AM kernel: AirPort: RSN handshake complete on en1
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:34.579 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 9)
13-01-04 2:50:35.093 AM configd: network configuration changed.
13-01-04 2:50:35.113 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
13-01-04 2:50:35.114 AM UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on TELUS3939 because it is protected and not on the exception list
13-01-04 2:50:35.116 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
13-01-04 2:50:35.118 AM configd: network configuration changed.
13-01-04 2:50:35.991 AM ntpd: proto: precision = 1.000 usec
13-01-04 2:50:37.270 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:37.271 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 8)
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:40.276 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 7)
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:43.281 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:43.282 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 6)
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:46.286 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 5)
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:49.291 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 4)
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:52.296 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 3)
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:55.301 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 2)
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Could not get the user record from OpenDirectory.
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)
13-01-04 2:50:58.307 AM SecurityAgent: Will sleep 3 seconds and try again (retryCount = 1)Fixed it!
Just changed my settings to auto log on.
Hooray! -
After installing the security update from 21.04.2015 my Phone does not start any more
Hi everybody,
I have installed the update 10052 for my Lumia 535 DS and now it can't be started any more. When starting the phone the two gears appear and start moving but than it's turned off. This happens each time I'm trying to start the phone. Any suggestions to get
my phone running again?
Alexander AllmendingerHi Chris, and a warm welcome to the forums!
I think your choices are to...
Reapply the Security update...
http://support.apple.com/downloads/SecurityUpdate_2008_008__Client_PPC
Reapply the Combo update...
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
Repair Permissions afterwards, reboot.
If all the above fails, then it appears to be time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if the Disk Directory is the slightest messed up, who knows what could happen!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing. -
When I want to create a playlist to add music to it ,,the playlist appears full screen instead of appearing in the right hand of the screen.It is the 1st time I have this problem!!!!Help elisabeth
Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD -
After installing the iOs6 on iphone4s I found that the passbook does not works. What's the problem?
What happened with YouTube on iPad 2 and how to use passbook on iPhone 4S if it doesn't works
Having same issue with Passbook.. Unable to select anything and when tapping App Store, nothing happens..
Is it just me or can't we remove apps within folders? Seems I have to move the app out of the folder then delete it?? Beat.. -
After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
Officejet 8000 - Printer says out of ink even after installing new ink cart. and new head.
My Officejet 8000 - Printer says "out of ink even after installing new ink cart. and new print head. I have tried two new cart. and still gives me the error. A few times it will show all inks are full and print a page or two then says it is out of ink. At one point I even was able to clean the heads and align them but same thing occurs. What is wrong??
Hi Lee_S
Try printing a Self Test Page and see what the Cartridge status & Printhead status is like.
Printing a self test page
Please let me know how you get on..
Thanks, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP -
After installing OS X Mavericks on myMacBook Pro the Canon IRA 6055 printer gives me
"Open error. Switch the printer off and on, and then start the print job again.: 16013"
Any sugestions?This is the new problem
I pinged the ip address and i looks to be working
So I'm not sure how to procead
I nstaled the lates driver package also -
ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks
Hi,
Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
the Problem report.
When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
"native" windows drivers. Now, every major PC company has there own version
Thus the problem report.
There is rather involved and lengthy procedure to check and install the correct Bluetooth drivers
in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
Here is what I propose;
The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
try apologizing to it and that you'll never never do it again, what ever it takes!
Make the best investment you can make for your Blackberry, buy a media card.
All the memory in the BB is dynamic, this facilitates the functions of the phone.
By storing media in that memory, you effect are wasting X amount for file storage.
Store all media and files on the media card, and you will have a smooth running device.
They run about $25.00usd, they are easy to install, and they also make moving your
media a snap. You will need the USB adapter that came with it, but you can get that at
your local carrier store.
So if you agree with this I need some info.
On the Blackberry go to the options icon,click then scroll up to ABOUT.
I need your software version number, it's listed in this format: 4.x.x.xxx.
Send it back to me and I can tell you what size card you can get.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.
Maybe you are looking for
-
** How to show the master query group for once in Report??
Hi I've developed a master-detail groups at a report The master one has it's repeating frame and the detail one has another repeating frame and put at another page at the layout. The porblem is that the master one is shown (the same record) in pages
-
Optical Drive gone on MacBook Trying To Install using Remote Disk
I've followed the instructions on using Remote Disk to reinstall my MacBook system software but the MacBook does not see the Remote Disk from my MacBook Pro. They are both on the same network and I've followed the instructions but when I hold down th
-
PDF from Word doesn't capture entire page
I've created many a PDF from Word documents, but today I'm puzzled. I've created a one-page flyer in standard letter size (8.5 x 11"). I've set all margins - including header and footer - to zero, and placed a top and bottom of page border right at t
-
I am having trouble with my iCal of not able to select my "due date". Normally, if you check the "due date" box, the date will appear. However my Mac doesn't seem to respond. What happened ? I've check with the retail shop in Kuala Lumpur and non of
-
Hello, I am now using Photoshop CS6 as my "standard" Photoshop. 12.1 is in the corner. I do like some new features but I am still a bit annoyed by the UI. Look at this. My UI philosophy is pretty simple. On the left side, a panel "bar" with everyth