I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?
i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?
You run Windows in Parallels or Fusion. Then in Windows you install the program.
Similar Messages
-
I had all my software, including my ‘Adobe Creative Suite 4 Design Premium’ removed from my MacPro (OSX 10.10.2) by a Computer technician after I had inadvertently installed some malware.
Now I can’t reinstall my CS4 because the installer software wants me to identify the product from which I am upgrading, but mine isn’t on the list. The old product from which I am upgrading is called ‘Adobe Design Collection’. Furthermore, it has 4 serial numbers (one each for Photoshop, InDesign, Acrobat and Illustrator), not just one, as the installer requires.
I know this can be done, as I have had it working for a long time. Am I doing something wrong now?Contact support be web chat and have them generate a working temporary serial/ challenge code for the install.
Mylenium -
TS3694 i have tried to restore my iphone but keep getting error 1015 any suggestions
i have tried to restore my iphone but keep getting error 1015 any suggestion
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
-
I have an imac 20 in. The old hard drive crapped out on me. i put a new harddrive in and am now trying to install linux. But the imac doesnt recognise any keyboards
Without a bootable backup/clone or a Time Machine backup of your previous Snow Leopard installation or a saved copy of Lion's install app, you'll have to upgrade your Leopard volume to Snow Leopard (10.6.6+) so you can waste another hour or more DLing the Lion thing again.
-
trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...
The work offline option can be found from Firefox button -> Web developer or from the menubar toolbar -> Work offline (Or at least thats what happens in Windows).
Have you any other reason for being offline; router off, firefox not dialing up or whatever. Or is security software or a firewall blocking firefox, or a network connection, or firefox setting etc set wrongly.
See also
*[[cannot connect after upgrading firefox]]
*[[options window - advanced panel]]
* [[error loading web sites]] -
I can not add Titles in IMovies. When I click on the Titles, IMovie shuts down. I am using Mac OSX Version 10.6.8 and IMovies version 8.0.6
Was able to add some Titles yesterday, but had some problems with shut downs. Today I can not get past clicking on Titles without a shutdownDK Flash,
http://support.apple.com/kb/TS3310 but you have 10.6.8. So this shouldn't apply. But just in case.
This had to do with the Far Far Away title causing iMovie to quit.
Try clearing caches and plist.
Do the behavior persist in a new user on the computer?
Calbe -
trying to remove an old version of I tunes, but keep getting the message 'The folder path I Tunes contains an invalid character'
It won't let me go any further, have tried deleting/repairing but get the same message and am blocked from continuing?Hi Barbara,
I had a similar problem recently and using the "more like this" feature I discovered an answer. To a problem posed by Holo7, who like myself was a newbie on this platform, b noir proposed a solution to Holo7's problem that also worked with my problem. It involves downloading a version of MS Windows Instal Cleanup and using it to completely remove all traces of the old version.
If you look at my problem (follow OldGit66) and the link to Holo7's problem then you will find b noir's answer which I think may help you. I am new around here so you might want to wait for one of the higher status correspondents.
Regards
John -
HT201413 i have tried resetting my iphone 4 but keep getting an error code at the end (34)
I HAVE AN IPHONE 4, I HAVE TRIED RESETTING THE PHONE BUT KEEP GETTING AN ERROR CODE AT THE END OF THE RESET ie;34, ANY IDEAS PLEASE
I'm not certain thats the problem. I stopped antivirus, I set screensaver to NOT trigger and yet it took me FOUR DAYS to completely sync my ipod touch. Stupid me decided to try it with the iPad and guess what...it's been three days and STILL timing out.
I don't think Steve Jobs died; I think they upgraded him to iOS5, he crashed and they could not restore him.
THIS UPGRADE *****. They rushed it out the door to get the fancy-dancy voice command thing on the iphones and yet that feature does not help ipod or ipad users. -
Keep getting error message "FCE" can't install on this disk. A newer version of this software already exists on this disk. Have remove all FCE elements with no success.
http://www.digitalrebellion.com/fcsremover/
-
The machine I am trying to install on is a MacBook Pro. The software is for an IRIScan express 2 scanner. It says (and provides a disc containing the software) it is compatible with Mac OS.
In System reqirements it states the following:
This is the minimal system configuration required to use Readiris:
a Mac OS computer with a G3 processor.
the operating system Mac OS X version 10.2 (“Jaguar”). Earlier ver- sions of the Mac OS operating system are not supported!
110 MB of free hard disk space.
I have no idea what (nor where to find out if it has) a G3 processor is. My machine has Mountain Lion. Is this "above" or "below" "Jaguar"?
Any assistance will be appreciated.I'll try Silverfast.
Err... Try VueScan first. VueScan have one-for-all software, Silverfast - lot of modules for specific scanners. If they not have version for your specific scanner - no chances.
VueScan works with at least some IRIS models: http://applejac.typepad.com/applejac_macintosh_users/2009/05/vuescan-universal-s oftware-image-capture-tool.html
And I see 10.7-10.8 support on IRIS page: http://www.irislink.com/c2-1628-189/Mac-OS-compatibility-support.aspx -
I have tried to recover my photos but keep getting a blank screen and it doesn't rest Iphoto
Can anybody help me recover my photos on Iphoto i followed the steps of getting the rest screen up but it goes blank and doesnt progress the full recovery.
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
Trying to send email photos in iPhoto. Have been able to successfully do this in the past. Unfortunately now all I get is ..."server did not reply." The server seems to work for normal email. Please advise.
In the iPhoto preferences ==> accounts delete the account and re-ente it
OR IMHO the better solution is to simply set Mail as the email client in the iPhoto preferences
LN -
Each time I try to sync I get the same error message. Each time I authorize my computer. And each time I get a reply that my computer is already authorized. I cannot get this to sync.Any ideas?
Maybe:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases -
Ok I need help. I went to use my phone, put in my passcode, emergency dial came up, then the phone said I didn't have an imei #. I hit the back button and then I was told I needed to restore and update using iTunes. I tried several times to do this and my phone is still not working. It acts like it's updating, but once the bar reaches the other side of my phone, iTunes tells me there was an error. I used all the ports on my pc, changed cables, restarted my pc, and still nothing. Can anyone please help me. This phone is my life and I can't afford to get another one.
Sounds like you might need to take it to an Apple Store but if it is an iPhone 3G it would no longer be under warranty.
Looking at the Apple Store online you can get an iPhone 3GS from $49 on AT&T if it comes to having to get a new one. Your other option is second hand. -
I have uninstall it and then reinstall it, but it could not work. I have done everything as described in:http://forums.adobe.com/thread/928315 but still unsuccessful.
My system is window 7 with 32-bit.
Pls help..Hello,
Welcome to Adobe Forums
Please check the version of Adobe Flash Player on your computer (You may check it here : Checking Flash Player version)
Note : Adobe Flash Player 11.9.900.117 is the latest version.
Download and run Flash Player uninstaller
Note : Make sure you have closed all the browsers window while running uninstaller.
Now you may download Latest version of Adobe Flash Player from here : Adobe Flash Player
Thanks,
Vikram
Maybe you are looking for
-
Do I have to delete all of my itunes?!
I got my iPod last christmas and I had over 500 songs on itunes, some of which i bought but most i put on from my cd's. My computer recently crashed and I had to send it in to get fixed, when I got my computer back, i had to reinstall itunes (this ha
-
Hi All, My requirement is to get all the PO's which were not GR /invoice posted from my quality system.When i go to EKPO and put WEPOS and REPOS = space,system is taking more time and not at all yielding the data. In addition to the above i have also
-
Terminating Event Terminating all work items
System : Solution Manager Business object : BUS2000116 1. I have multiline container element for Agent.Agents are Dynamic not static.Approval from all agents is required. 2. Work flow desing a.Defination of Agent : ABAP Dictionary type SWP_AGENT with
-
PowerPC clicks into sleep mode, then clicks right back
Hi everyone. New thing I am experiencing since yesterday - my computer will go into sleep mode, but immediately clicks back on again. It's a Dual 2.7 GHz PowerPC G5 from 2005 running on OSX 10.4.11. At first I thought it was an issue with one of our
-
No play-head during playback on iPhone 4.
When I'm using the iPod function on my iPhone, to play tunes or podcasts, the playhead is no longer there. This means I can't see how far through the track I am, I can't scrub back and forth, and the 'rewind 30 seconds' function is no more. I recetly