If I suspend wireless connectivity can I then use the camera connection kit along with the usb ethernet adapter to connect to the internet?

If I suspend wireless connectivity on my Ipad2, can I then use the camera connection kit alond with the Apple USB Ethernet cable to connect to the internet?

No, you can't.

Similar Messages

  • Firefox opens a dialog box when I use the browser, "Checking add-ons for compatibility..." then open the Firefox start page along with my homepage. I do not want the Firefox page when I open the browser. how do I stop this?

    Since Firefox updated it checks add-ons every time I open Firefox. The Firefox homepage then opens along with my home page, two tabs. I want the checking to stop. This has not happened before--only with this update.

    This question was reposted and replied to here: <br>
    https://support.mozilla.com/en-US/questions/878953
    ... so I'll lock this thread.

  • Can my husband use my iTunes on my computer with his iPad?

    Can my husband use my iTunes on my computer with his new (not setup yet) iPad, get the digital downloaded movies (that come with DVDs and had to download them to iTunes) but NOT have to use MY apple ID and password?  We want him to have his own apple ID, password, credit card info, account, etc. but share the same iTunes....is this possible if so, how do we set it up?  Thanks for any help.

    Open itunes, connect ipad, select what you want, sync.
    On the ipad, go ot settings, sign out of your account and into his.
    Click Support at the top  of this page, then click manuals

  • MacBook AIr usb ethernet slow when connected to second switch

    Hi,
    We have MacBook Airs with 100 Mbps Apple USB ethernet adapters.
    We have managed Cisco switches for the LAN.
    We experience fast speeds when a USB etherenet/MacBook Air is connected directly to the switch.
    However... if we introduce a second switch between the MacBook AIr and the main Cisco switch we experience horiffic slowdowns for some (not all) network activity.
    For example, we have IP phones with ethernet passthrough. They work great with iMacs and Thunderbok Macbook Airs. However, if we connect a MacBook AIr/etherenet adpater to the ethernet phone, we expereience a horrific slowdown when using Apple Remote Desktop Manage > Copy items... (and also on connectoins to an in-house database). It's probably 15 - 20x slower than when connected directly to the Cisco switch. Other network operatoins work at expected speeds an the Air.
    It's not just connecting to IP phnones that causes this problem. If I use a Netgear 1000/100 switch on the desktop, set up as
    MacBok Air USB ethernet > Netgear > Cisco
    we have the same horrible slowdown for some network operations.
    I purchased a 3rd party USB adpater, but had the same results.
    Can anyone shed any light on this issue, please? Is there a setting onn teh CISCO switch that is causing the problem? Any know problmes with USB etherenet on MacBook air.
    Many thanks,
    b.

    RonAnnArbor wrote:
    Is this a question? A complaint? Nothing any of us can do about that, and this is a well-documented and well-known issue.
    It doesn't effect most MBA users who most likely use wireless for most of their transactions, and the times you need to use ethernet, you are right, it will run slower.
    Just curious I have a pretty fast 5N wifi network. If I'm setting up a new MB Air from another laptop is it going to be faster through the ethernet adapter or the wifi network?

  • HT4106 Is the IPad connector kit compatible with the Canon Eos 350D digital camera, I can't get it to work. Comes up as device not supported

    is the  camera connector kit compatible with the Canon EOS 350D digital camera, as I can get it to work

    Check what you've got 'Communications' set to on the camera's settings - it needs to be 'Print/PTP', not 'Normal' 'Normal' to 'PTP' :

  • Error : 'The Connection can not be used to perform thsi operation

    Dear All,
    I am getting an error like 'The Connection can not be used to perform thsi operation, it is either close or Invalid in this context.
    Below is the code what am using:
    Sub Select_Query()
    Dim SQL_String As String
    Dim rs As ADODB.Recordset 'This holds the data
    Dim cn As ADODB.Connection 'Declaring Connection
    Dim cmdobj As ADODB.Command 'Declare command Object
    'Sheets("Payment").Select
    Set cn = New ADODB.Connection
    cn.Open ("Provider=MSDAORA;Data Source=MyDatabase;User ID=Prasad; Password=Prasad12;")
    Dim count_value As Long
    count_value = WorksheetFunction.CountA(Worksheets("Payments").Range("A:A"))
    For i = 4 To count_value
    SQL_String = Worksheets("Payments").Range("AA" & i).Value
    Set rs = New ADODB.Recordset
    rs.CursorLocation = adUseClient
    rs.Open SQL_String, cn, adOpenForwardOnly, adLockOptimistic, adCmdText
    Dim val As Integer
    val = rs.recordCount
    If val = 0 Then
    Worksheets("Payments").Range("AZ" & i).Value = "No"
    'Else
    'Worksheets("Uploaded").Range("O" & i).Value = "Yes"
    End If
    cn.Close
    Set con = Nothing
    Next
    'cn.Execute SQL_String
    'con.Close
    Set con = Nothing
    End Sub
    And select statment is picking one of the sheets, and SQL query is:
    ="SELECT sa.acct_id
    FROM ci_sa sa, ci_sp sp, ci_sa_sp ss, ci_sp_geo spg,ci_acct_char cac
    WHERE sa.sa_id = ss.sa_id
    AND ss.sp_id = sp.sp_id
    AND sp.sp_id = spg.sp_id
    AND spg.geo_type_cd LIKE '%RR%'
    AND spg.geo_val ='"&B4&"'
    and sa.ACCT_ID=cac.ACCT_ID
    AND cac.char_type_cd LIKE '%SDO%'
    AND TRIM (char_val) IN ('"&Master!G9&"')"
    Please help me in this..
    Regards,
    Prasad

    Please, this is a Oracle forum, not a VBA forum. Mark this thread as answered and post it in a VBA forum.

  • Can't get my mail when use the USB Ethernet adapter

    I can't get my mail when use the Apple USB Ethernet Adapter. If I use a wireless connection, there is no problem. The LAN which I'm trying to connect is behind a proxy server but the Internet is working 100%.

    Hi ViK,
    This sounds like a question for the network administrator of the location. Without knowing how the proxy is set it's impossible to know what it's blocking (incoming/outgoing). It sounds like it might be filtering the incoming mail server.

  • Can video be loaded to ipad from any camcorder with a usb (video out) cord?

    Using the camera connection kit usb adaptor, can video be downloaded to an iPad2 from any camcorder with a usb (video out) cord?  Would the video then be accessed via iTunes?

    From http://support.apple.com/kb/HT4101 :
    iPad Camera Connection Kit imports most media files on the camera or SD card, regardless of whether that format is compatible with iPad. If you are unable to view certain images or videos, verify that they are in an iPad compatible format, or import them to your computer for viewing.
    They should then be accessible from your computer, but not via iTunes : http://support.apple.com/kb/HT4083

  • Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

    Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

    3-D is very memory intensive.
    System requirements | Photoshop
    Mac OS
    Multicore Intel processor with 64-bit support
    Mac OS X v10.7, v10.8, or v10.9
    2 GB of RAM (8 GB recommended)
    3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
    OpenGL 2.0–capable system
    Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
    ** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
    Bottom line, you don't have enough VRAM
    Nancy O.

  • When I try to sign in to my account on iTunes, I get the above error message, along with "Please review your account information". When I then click on "Review"

    When I try to sign in to my account on iTunes, I get the above error message, along with"Please review your account information".
    When I then click on "Review", it comesup with the page "Create an Apple Account for the iTunes Store"and presents me with the Terms Of Service.
    When I click "Agree",  It is disabled.
    Can anyone tell me why this has happened and how to resolve it?
    Please, please, please help.

    Count me in as having the same problem. I have been leaving messages in the iTunes for Mac forum where others in there also are having problems. I have been unable to access my account since 11/7/2007. E-mails with Apple have not worked and now I haven't heard back from them since Saturday. I have tried both on a Mac and Windows machine and keep receiving the same error message that:
    This Apple ID has not yet been used with iTunes.
    I last purchased music with this account on 10/30/2007. I even tried resetting my password, changing my account info, trying on a computer with iTunes 7.4, etc. I have money in that account and 150 songs and 5-6 tv shows that I cannot access. I also just purchased a new computer and cannot sync my iPod with this computer since these songs will not transfer.
    Apple really needs a phone number for technical support. Having to deal with e-mails back and forth (and waiting a day for each e-mail) is not a good business practice. Hopefully they will have a phone number in the future.
    Either way, count me in on getting annoyed that a week later, this issue has not been fixed.

  • Can't reach network video server on Mac Mini's USB Ethernet Adapter.

    I am trying to connect an IP video server to my Mac Mini's USB>Ethernet adapter. The server works fine on the built in Ethernet "en(0)", but is unreachable on the USB>Ethernet adapter network"en(3)".
    Is this a subnet issue? I don't know much about networking obviously, but I think I just need to find a way to designate the proper port to look on, because the Mac is looking on the built in Ethernet only when I specify http://192.168.0.90:80/
    The en(3) is configured for DCHP.
    I could just hook the server up to the built in Ethernet, but then I'll have to run new and very long cat 5 cable.
    I'd love to hear any ideas on how to get this working.

    The Network Settings for the USB>Ethernet port are:
    IPv4: Using DHCP
    IP Address 169.254.33.152
    Subnet Mask: 255.255.0.0
    Router: (none)
    DNS Server: (none)
    Search Domains: (none)

  • Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any su

    Since upgrading to Mavericks, I have been unable to sync devices (specifically ipad mini and iphone 4s) to my MId 2013 Imac . They wil rapidly connect and disconnect, and I'm unable to do anything with the device. This happens with both USB ports.  Any suggestions?
    MacBook Air, OS X Mountain Lion (10.9.1)

    Obviously, syncing an iOS device with iTunes over USB is still supported in Mavericks. Calendar and contact syncing with iTunes is no longer supported. That has nothing to do with your problem.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Will a USB-parallel adapter cable connect my MacBook to an OLD PC printer?

    I have a very old laser printer of high quality and want to connect it (not wirelessly) to my MacBook. Does anyone know whether a USB-parallel adapter cable would do the job? Thanks,

    Oh, a wrinkle: the printer has a cord coming out of it meant to plug (female) into a PC (male). So I'm wondering what to do. Any suggestions?

  • Can you determine link status with USB Ethernet adapter?

    I'm wanting to replace an old G4 PowerBook with a 11" MacBookAir. I install networks, and I often need to determine link status of an Ethernet connection. With the built-in Ethernet port on most Macs, you can check the Network Status to see if there is link on an Ethernet connection (either the green or yellow status signs).
    If I am using the Apple USB Ethernet adapter, do I get similar feedback from the Network preference panel? If not, perhaps a terminal command that would do the same?

    Yes - the Network Panel under System Preferences works the same as with a regular Mac, showing USB Ethernet status (connected, disconnected, etc) and with the updated connected IP address, etc.

  • Can I re-use a parameterized manual test case with different set of parameters in a different test plan?

    Can I re-use a parameterized manual test case with different set of parameters in a different test plan without impacting the parameters in the first test plan?

    Hi ssteele_1,
    Thank you for posting in MSDN forum.
    Generally, I know that if you want to re-use a parameterized manual test case and without impacting the parameters in the first test plan.
    I suggest you could try to right click this parameterized manual test case ->Select the Create copy and add to suite option like the following screen shot.
    Then the parameterized manual test case can be re-used as a new test case in this MTM and it will did not impact the original parameterized manual test case.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for