Import package creation failed (name locked)
Hello!
When I import a package, one of the objects in ‘Import Results’, have the ‘Action’ 'Creation failed (named locked)'.
I have search the database for the same name:
select * from dba_objects where object_name = 'ADDRESS_HISTORY'
But no rows returns.
ADDRESS_HISTORY is a function in the package. In the "Import Results" it exists twice. In the beginning with Action 'No change' and in the end as described above.
ADDRESS_HISTORY only occurs once in the package.
Why do I get the message 'creation failed (name locked)'?
Best regards,
Tina N Mörnstam
I had to remove the function from the package, make an import. Rewrite the function in the package again and then redo the import.
Tina
Similar Messages
-
Native installation package creation failed: Error: EndUpdateResource: Windows Error #5
We've got a customer who gets this error when attempting to install our software. My Google-fu makes me think this is a rare error. Chris, would you have any ideas as to the cause of this?
Many thanks,
Taylor
[2011-09-18:14:36:24] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:36:24] Commandline is:
[2011-09-18:14:36:24] No installed runtime detected
[2011-09-18:14:36:44] Relaunching with elevation
[2011-09-18:14:36:44] Launching subprocess with commandline c:\users\sawhit~1\appdata\local\temp\air9728.tmp\adobe air installer.exe -ei
[2011-09-18:14:36:52] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:36:52] Commandline is: -stdio \\.\pipe\AIR_6756_0 -ei
[2011-09-18:14:36:52] No installed runtime detected
[2011-09-18:14:36:54] Starting silent runtime install. Installing runtime version 2.7.1.19610
[2011-09-18:14:36:54] Installing msi at c:\users\sawhit~1\appdata\local\temp\air9728.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
[2011-09-18:14:37:29] Runtime Installer end with exit code 0
[2011-09-18:14:37:30] Elevated install completed
[2011-09-18:14:37:37] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2011-09-18:14:37:37] Runtime Installer end with exit code 0
[2011-09-18:14:37:43] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:37:43] Commandline is: -installupdatecheck
[2011-09-18:14:37:43] Installed runtime (2.7.1.19610) located at c:\Program Files\Common Files\Adobe AIR
[2011-09-18:14:37:48] Performing pingback request
[2011-09-18:14:37:49] Pingback request completed with HTTP status 200
[2011-09-18:14:37:49] Starting runtime background update check
[2011-09-18:14:37:49] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.7.1.19610/update
[2011-09-18:14:37:49] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.7.1.19610/update to C:\Users\sawhitman\AppData\Roaming\Adobe\AIR\Updater\Background
[2011-09-18:14:37:50] Runtime update not available
[2011-09-18:14:37:50] Unpackaging cancelled
[2011-09-18:14:37:50] Runtime Installer end with exit code 0
[2011-09-18:14:42:13] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:42:13] Commandline is: C:\Users\SAWHIT~1\AppData\Local\Temp\YNAB3_Live_3.5.3.4-2.air
[2011-09-18:14:42:13] Installed runtime (2.7.1.19610) located at c:\Program Files\Common Files\Adobe AIR
[2011-09-18:14:42:16] Unpackaging file:///C:/Users/SAWHIT~1/AppData/Local/Temp/YNAB3_Live_3.5.3.4-2.air to C:\Users\sawhitman\AppData\Local\Temp\flaB571.tmp
[2011-09-18:14:42:39] Application signature verified
[2011-09-18:14:42:39] Unpackaging/validation complete
[2011-09-18:14:42:39] No app located for appID 'com.youneedabudget.YNAB3.Live' and pubID '9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1'
[2011-09-18:14:42:50] Converting unpackaged application to a native installation package in C:\Users\sawhitman\AppData\Local\Temp\fla3A1C.tmp
[2011-09-18:14:43:03] Native installation package creation failed: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: EndUpdateResource: Windows Error #5" errorID=0]
[2011-09-18:14:43:13] Application Installer end with exit code 7
[2011-09-18:14:43:20] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
[2011-09-18:14:43:20] Commandline is: C:\Users\SAWHIT~1\AppData\Local\Temp\YNAB3_Live_3.5.3.4-2.air
[2011-09-18:14:43:20] Installed runtime (2.7.1.19610) located at c:\Program Files\Common Files\Adobe AIR
[2011-09-18:14:43:24] Unpackaging file:///C:/Users/SAWHIT~1/AppData/Local/Temp/YNAB3_Live_3.5.3.4-2.air to C:\Users\sawhitman\AppData\Local\Temp\flaC01C.tmp
[2011-09-18:14:43:37] Application signature verified
[2011-09-18:14:43:37] Unpackaging/validation complete
[2011-09-18:14:43:37] No app located for appID 'com.youneedabudget.YNAB3.Live' and pubID '9C763150EFAB05FD2A2B78705C7A54E2FCDDE07D.1'
[2011-09-18:14:43:59] Converting unpackaged application to a native installation package in C:\Users\sawhitman\AppData\Local\Temp\fla47B3.tmp
[2011-09-18:14:44:16] Native installation package creation failed: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: EndUpdateResource: Windows Error #5" errorID=0]
[2011-09-18:14:44:28] Application Installer end with exit code 7On Windows 7, make sure you are running as Administrator:
Download and install Adobe AIR from this page
Download YNAB3_Live_3.5.3.4.air to a folder on your computer.
Navigate to the folder on your computer where you saved the YNAB3_Live_3.5.3.4.air. If you are on Windows Vista or Windows 7, right-click on the file and choose “Run as Administrator.” For Mac, Linux, and all other versions of Windows, simply double-click on it to install YNAB 3.
Thanks,
Lisa Chao
Adobe Flash Runtime Team -
NetWeaver install on Windows - Import Monitor failing to import packages
Following are the errors in import_monitor.log during installation. The errors are due to sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline. 7 out of 28 packages imported fine. What is the fix?
TRACE: 2009-11-24 12:07:32 com.sap.inst.migmon.LoadTask run
Loading of 'SAPUSER' import package is started.
TRACE: 2009-11-24 12:07:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPUSER' import package into database:
C:\usr\sap\DE2\SYS\exe\uc\NTI386\R3load.exe -i SAPUSER.cmd -dbcodepage 4103 -l SAPUSER.log -nolog -c 50000
TRACE: 2009-11-24 12:07:32 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is started.
TRACE: 2009-11-24 12:07:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAP0000' import package into database:
C:\usr\sap\DE2\SYS\exe\uc\NTI386\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -nolog -c 50000
ERROR: 2009-11-24 12:07:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAPUSER' import package is interrupted with R3load error.
Process 'C:\usr\sap\DE2\SYS\exe\uc\NTI386\R3load.exe -i SAPUSER.cmd -dbcodepage 4103 -l SAPUSER.log -nolog -c 50000' exited with return code 2.
For mode details see 'SAPUSER.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-11-24 12:07:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is interrupted with R3load error.
Process 'C:\usr\sap\DE2\SYS\exe\uc\NTI386\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -nolog -c 50000' exited with return code 2.
For mode details see 'SAP0000.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2009-11-24 12:08:02
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-11-24 12:08:02
20 error(s) during processing of packages.
INFO: 2009-11-24 12:08:02
Import Monitor is stopped.
Jay
Part of details of sapuser.log.
C:\usr\sap\DE2\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
C:\usr\sap\DE2\SYS\exe\uc\NTI386\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Feb 3 2009 23:16:17
C:\usr\sap\DE2\SYS\exe\uc\NTI386\R3load.exe -i SAPUSER.cmd -dbcodepage 4103 -l SAPUSER.log -nolog -c 50000
DbSl Trace: Connect to database failed, rc = -10709 (Connection failed (RTE:[5] database not running))
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect to database failed, rc = -10709 (Connection failed (RTE:[5] database not running))
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\DE2\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\DE2\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20091124120733
Jay
Edited by: jay sethi on Nov 24, 2009 6:58 PMWhat is the content of 'SAPUSER.log'?
-
Web ADI Importer Success Message Creation failing
Hi Gurus,
When I'm trying to create a 'Success Message' importer, it is failing with the below error:
"oracle.jbo.TooManyObjectsException: JBO-25013: Too many objects match the primary key oracle.jbo.Key[20003 SM_501017 US ]."
When I observed the standard integrator, which has 'Success Message' importer rule, the 'Importer' step has the same exception. Anyone create the 'Success Message' successfully without any error.
My requirement is that I get a value(reference as 'total') from a pre-importer sql query and I want to show this value ($importer$.total) in the success message.
I'm using :
EBS 12.1.3
Windows XP
Database 11.2.0.3.0
Please help me in resolving this issue.
Thanks
MadhuAlternatively, copy from an existing uploader (search in BNE_INTEGRATORS_B) with the SQL below.
update BNE_INTEGRATORS_B
set
upload_param_list_app_id = 20003
,upload_param_list_code = <find one to copy from>
where integrator_code = <your code>
not supported, but does the trick.
Good luck
Jeroen -
PI 711 Installation: Loading of 'SAPNTAB' import package: error but no log
Hello,
I'm perfromong an installation of a SAP PI 7.11 ystem on windoows Server 2003 and Oracle 10.2 .
I've perfromed the installation of the DEV system without particular issue.
But now when tryning to install the QAS system , I can't finish the installation : Im' stuck in the import ABAP step ...
It is impossible to import the 'SAPNTAB' package. I couln't find the reason.
I've tried updating the R3load binary, rebooting the server, restarting the instalaltion from scratch but it didn't help.
Here I provide you the logs, maybe you can help me
SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110223195542
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 14 2010 22:52:23
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS deleted/truncated #20110223195543
sapinst_dev.log
Syslib info about system call. OS message 109 (The pipe has been ended.
) after execution of system call 'ReadFile' with parameter ((read end of child process output pipe)), line (403) in file (synxcpipe.cpp).
WARNING 2011-02-23 19:56:12.607
CJSlibModule::writeWarning_impl()
Execution of the command ""C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\sapjvm\sapjvm_5\bin\java.exe" -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.5.0_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 5.1.024)
SAP Java 64-Bit Server VM (build 5.1.024, Sep 4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode))
Import Monitor jobs: running 1, waiting 28, completed 0, failed 0, total 29.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 0, waiting 28, completed 0, failed 1, total 29.
TRACE 2011-02-23 19:56:12.607
Function setMessageIdOfExceptionMessage: nw.programError
ERROR 2011-02-23 19:56:12.607
CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
import_monitor.log
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is started.
INFO: 2011-02-23 19:55:42 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2011-02-23 19:55:42
Data codepage 1100 is determined using TOC file 'E:\SAPCD\51036706\DATA_UNITS\EXP1\DATA\REPOSRC.TOC' for package 'REPOSRC'.
INFO: 2011-02-23 19:55:42
Version table 'SVERS' is found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
INFO: 2011-02-23 19:55:42
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR' from package 'SAPNTAB'.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is started.
TRACE: 2011-02-23 19:55:42 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPNTAB' import package into database:
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
ERROR: 2011-02-23 19:55:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPNTAB' import package is interrupted with R3load error.
Process 'E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast' exited with return code -1,073,741,819.
For mode details see 'SAPNTAB.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2011-02-23 19:56:12
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2011-02-23 19:56:12
1 error(s) during processing of packages.
INFO: 2011-02-23 19:56:12
Import Monitor is stopped.
Edited by: Raoul Shiro on Feb 23, 2011 8:11 PM
Edited by: Raoul Shiro on Feb 23, 2011 8:12 PMHello,
Thank you for your answer.
I already opened a sap cutomer call, they answered that it it not a database issue,
I restarted the installationfriom scracth , but i still got the same error :
Here is the full content of the file SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -ctf I E:\SAPCD\51036706\DATA_UNITS\EXP3\DATA\SAPNTAB.STR C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ORA\STD\AS\DDLORA.TPL SAPNTAB.TSK ORA -l SAPNTAB.log
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: job completed
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110225170643
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/711_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe: version R7.11/V1.4 [UNICODE]
Compiled Dec 22 2008 00:13:12
E:\usr\sap\PIQ\SYS\exe\uc\NTAMD64\R3load.exe -i SAPNTAB.cmd -dbcodepage 4103 -l SAPNTAB.log -stop_on_error -loadprocedure fast
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: SVERS created #20110225170643
Regards.
Raoul -
Tree creation failed on node: pcd:portal_content/...
Hi out there,
after patching our EP 7 from SPS 10 to SPS 13 we have the following error:
In the portal content directory there are some folders which cannot be
expanded anymore. The following error message appears: "Could not load
or refresh node Tree creation failed on node: pcd:portal_content/..."
I have found out that this is always caused by an inconsistent role
which is located in the folder I'd like to expand (or in a subfolder
of it).
It seems that this error has already been occuring in earlier SPs and / or releases. Has anyone found a solution to it?!?
Thanx for your support and best regards
Juergen Kuechle.Hi
Restart the server it solve ur problem
The problem is caused by a missing "ADD" notification for imported folder objects. If the package contains new folder objects , the caches on other cluster nodes are not synchronized for these folders. If the package contains a complete folder hierarchy with other PCD objects (like iViews, pages, roles, ...) under a folder, and this folder object is contained in the package and imported before the objects under the folder, the complete hierarchy is not synchronized in the cluster.
Release the PCD cache on all cluster nodes after importing an EPA file containing folder objects
Create separate transport packages for the folder objects and import them after the transport packages containing the (regular) objects under these folders
Check SAP NOTE 991599
Regards
Krishna. -
Cluster Creation Failed with Ambari AppManager
Hi,
I am getting this error when creating cluster
(cluster create --name hdp --distro HDP-1.3.2 --appManager Ambari --networkName Hadoop_NW)
serengeti>appmanager list
NAME DESCRIPTION TYPE URL
Default Default application manager Default
ambari AmbariServer Ambari http://10.6.55.239:8080
==========================
It seems that agent on the host is not able to connect to the server but the problem is the Ambari Server is not located at localhost:8080 how can i change it to ambari server's address.
Running setup agent script...
==========================
{'exitstatus': 1, 'log': "Host registration aborted. Ambari Agent host cannot reach Ambari Server 'localhost:8080'. Please check the network connectivity between the Ambari Agent host and the Ambari Server"}
Connection to node1.hadooptest.com closed.
SSH command execution finished
host=node1.hadooptest.com, exitcode=1
ERROR: Bootstrap of host node1.hadooptest.com fails because previous action finished with non-zero exit code (1)
ERROR MESSAGE: tcgetattr: Invalid argument
Connection to node1.hadooptest.com closed.
STDOUT: {'exitstatus': 1, 'log': "Host registration aborted. Ambari Agent host cannot reach Ambari Server 'localhost:8080'. Please check the network connectivity between the Ambari Agent host and the Ambari Server"}
Connection to node1.hadooptest.com closed.Hi Qing,
Thanks for the solution its solved the earlier problem but now i got a new one. According to the error Failed to start ping port listener of:[Errno 98] Address already in use" This the only address on the lan .... what can be causing this issue ?
Mohsin
The failed nodes: 1
[NAME] hdp2-worker-0
[STATUS] VM Ready
[Error Message] ==========================
Copying common functions script...
==========================
scp /usr/lib/python2.6/site-packages/common_functions
host=node5.hadooptest.com, exitcode=0
==========================
Copying OS type check script...
==========================
scp /usr/lib/python2.6/site-packages/ambari_server/os_check_type.py
host=node5.hadooptest.com, exitcode=0
==========================
Running OS type check...
==========================
Cluster primary/cluster OS type is redhat6 and local/current OS type is redhat6
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=0
==========================
Checking 'sudo' package on remote host...
==========================
sudo-1.8.6p3-12.el6.x86_64
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=0
==========================
Copying repo file to 'tmp' folder...
==========================
scp /etc/yum.repos.d/ambari.repo
host=node5.hadooptest.com, exitcode=0
==========================
Moving file to repo dir...
==========================
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=0
==========================
Copying setup script file...
==========================
scp /usr/lib/python2.6/site-packages/ambari_server/setupAgent.py
host=node5.hadooptest.com, exitcode=0
==========================
Running setup agent script...
==========================
Restarting ambari-agent
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Found ambari-agent PID: 1682
Stopping ambari-agent
Removing PID file at /var/run/ambari-agent/ambari-agent.pid
ambari-agent successfully stopped
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Checking for previously running Ambari Agent...
Starting ambari-agent
Verifying ambari-agent process status...
ERROR: ambari-agent start failed
Agent out at: /var/log/ambari-agent/ambari-agent.out
Agent log at: /var/log/ambari-agent/ambari-agent.log
('INFO 2015-04-01 06:19:59,137 HostCheckReportFileHandler.py:109 - Creating host check file at /var/lib/ambari-agent/data/hostcheck.result
INFO 2015-04-01 06:19:59,205 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:09,207 Heartbeat.py:76 - Sending heartbeat with response id: 1 and timestamp: 1427869209207. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:09,251 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:19,252 Heartbeat.py:76 - Sending heartbeat with response id: 2 and timestamp: 1427869219252. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:19,296 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:29,296 Heartbeat.py:76 - Sending heartbeat with response id: 3 and timestamp: 1427869229296. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:29,340 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:39,340 Heartbeat.py:76 - Sending heartbeat with response id: 4 and timestamp: 1427869239340. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:39,384 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:49,384 Heartbeat.py:76 - Sending heartbeat with response id: 5 and timestamp: 1427869249384. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:49,428 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:59,429 Heartbeat.py:76 - Sending heartbeat with response id: 6 and timestamp: 1427869259429. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:21:05,061 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,870 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,871 DataCleaner.py:36 - Data cleanup thread started
INFO 2015-04-01 06:21:10,875 DataCleaner.py:71 - Data cleanup started
INFO 2015-04-01 06:21:10,876 DataCleaner.py:73 - Data cleanup finished
ERROR 2015-04-01 06:21:10,877 PingPortListener.py:44 - Failed to start ping port listener of:[Errno 98] Address already in use
INFO 2015-04-01 06:21:10,877 PingPortListener.py:52 - Ping port listener killed
', None)
Connection to node5.hadooptest.com closed.
SSH command execution finished
host=node5.hadooptest.com, exitcode=255
ERROR: Bootstrap of host node5.hadooptest.com fails because previous action finished with non-zero exit code (255)
ERROR MESSAGE: tcgetattr: Invalid argument
Connection to node5.hadooptest.com closed.
STDOUT: Restarting ambari-agent
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Found ambari-agent PID: 1682
Stopping ambari-agent
Removing PID file at /var/run/ambari-agent/ambari-agent.pid
ambari-agent successfully stopped
Verifying Python version compatibility...
Using python /usr/bin/python2.6
Checking for previously running Ambari Agent...
Starting ambari-agent
Verifying ambari-agent process status...
ERROR: ambari-agent start failed
Agent out at: /var/log/ambari-agent/ambari-agent.out
Agent log at: /var/log/ambari-agent/ambari-agent.log
('INFO 2015-04-01 06:19:59,137 HostCheckReportFileHandler.py:109 - Creating host check file at /var/lib/ambari-agent/data/hostcheck.result
INFO 2015-04-01 06:19:59,205 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:09,207 Heartbeat.py:76 - Sending heartbeat with response id: 1 and timestamp: 1427869209207. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:09,251 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:19,252 Heartbeat.py:76 - Sending heartbeat with response id: 2 and timestamp: 1427869219252. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:19,296 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:29,296 Heartbeat.py:76 - Sending heartbeat with response id: 3 and timestamp: 1427869229296. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:29,340 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:39,340 Heartbeat.py:76 - Sending heartbeat with response id: 4 and timestamp: 1427869239340. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:39,384 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:49,384 Heartbeat.py:76 - Sending heartbeat with response id: 5 and timestamp: 1427869249384. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:20:49,428 Controller.py:211 - No commands sent from the Server.
INFO 2015-04-01 06:20:59,429 Heartbeat.py:76 - Sending heartbeat with response id: 6 and timestamp: 1427869259429. Command(s) in progress: False. Components mapped: False
INFO 2015-04-01 06:21:05,061 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,870 main.py:83 - loglevel=logging.INFO
INFO 2015-04-01 06:21:10,871 DataCleaner.py:36 - Data cleanup thread started
INFO 2015-04-01 06:21:10,875 DataCleaner.py:71 - Data cleanup started
INFO 2015-04-01 06:21:10,876 DataCleaner.py:73 - Data cleanup finished
ERROR 2015-04-01 06:21:10,877 PingPortListener.py:44 - Failed to start ping port listener of:[Errno 98] Address already in use
INFO 2015-04-01 06:21:10,877 PingPortListener.py:52 - Ping port listener killed
', None)
Connection to node5.hadooptest.com closed.
cluster hdp2 resume failed: Task execution failed: An exception happens when App_Manager (Ambari) creates the cluster: (hdp2). Creation fails.. -
Argument Order Reversed Importing Package into OWB
I'm having a problem importing Packages into OWB. It recognizes the Functions contained in the Package, however the order of the arguments for each Function are reversed after I complete the import into OWB. This causes execution of the mapping to fail... Additionally, after importing into OWB, OWB doesn't seem to recognize any optional parameters or default values in the signature of the Function. I must be doing something wrong... Can anyone help...
Thanks
AlanHi
Standard approach to be followed for any object modification
1. If you have created your package from OWB and deployed it into your DB, always do it that way i.e. Design center -->DB . Do not make any modifications on DB level and import in back to your Design center. OWB manages Ids for all objects on the repository and this will confuse it. That is why you see two versions of the same package . Any modifications should be done on Design center level and then do a replace on the package from control center
2. If an object (package or procedure) is created on DB directly and is imported into design center, follow the same norm everytime you make any changes to that object. The status of that object will appear as "New" or "Not deployed" on control center but that is fine because OWB has no ID on its repository to maintain this information.
3. If you need to rename any object already deployed from OWB, always drop it first, then rename it and then deploy it. That way OWB will maintain the name and ID on its end and not get confused.
4. For your case, you can drop the older version of the package from OWB, delete the one imported from Database into OWB, make the changes on OWB level (adding parameter etc) and then redeploy the same package as replace from control center.
Hope these tips help
birdy -
SessionVideo.publishSession() == DAC-405: Application module creation failed
The project contains a dbInfo class that was designed as perscribed in the Data form tutorial. Also a frame class which has its textFields bound to the rowSetInfo dataItem that are described in the dbInfo class. The following error/exception occurs when i try to publish the sessionInfo:
ERROR...
PANIC
DAC-405: SessionInfo: Application module creation failed; className: VideoDBModule
DETAILS
DAC-405: SessionInfo: Application module creation failed; className: VideoDBModule
null
Associated CODE...
public dbInfo() {
try {
jbInit();
sessionVideo.publishSession(); <<<<<<<ERROR OCCURS HERE
catch (Exception e) {
e.printStackTrace();
I checked my business components by creating a default data form using the data form WIZARD. This worked fine and i found that by removing(commenting out) the code associated with the loginDialogueBox(added by wizard) caused the same error to occur with this data form.
PLEASE HELP, after all this work i would really like to see this working
AdamWilliam...thanks for the reply....
Below are details on where the section of the Data form tutorial that i followed, is in help.
help
help topics
Tutorials and sample applications
tutorials
Developing the online orders data form client
creating the data form client
creating the customer view data form(TASK 3)
or alternatively the code from my dbInfo class:
The class has one sessionInfo component: sesionVideoDB
a rowSetInfo item: rowSetHousehold
and a find function which is called from a data aware frame which has its textfields bound to the attributes of the rowSetHousehold
=======================================================================
package DACVideo;
import oracle.dacf.dataset.*;
import oracle.dacf.dataset.connections.*;
* A Class class.
* <P>
* @author Adam Maddox
public class dbInfo extends Object {
SessionInfo sessionVideoDB = new SessionInfo();
static RowSetInfo rowSetHousehold = new RowSetInfo();
static AttributeInfo IdrowSetHousehold = new AttributeInfo(java.sql.Types.NUMERIC);
AttributeInfo ChainIdrowSetHousehold = new AttributeInfo(java.sql.Types.NUMERIC);
AttributeInfo HomeStoreIdrowSetHousehold = new AttributeInfo(java.sql.Types.NUMERIC);
AttributeInfo HomeHouseholdCategoryIdrowSetHousehold = new AttributeInfo(java.sql.Types.NUMERIC);
AttributeInfo ChainHouseholdCategoryIdrowSetHousehold = new AttributeInfo(java.sql.Types.NUMERIC);
AttributeInfo PrimaryPersonrowSetHousehold = new AttributeInfo(java.sql.Types.NUMERIC);
AttributeInfo CreateDaterowSetHousehold = new AttributeInfo(java.sql.Types.DATE);
AttributeInfo DeleteDaterowSetHousehold = new AttributeInfo(java.sql.Types.DATE);
AttributeInfo HomePhone1rowSetHousehold = new AttributeInfo();
AttributeInfo HomePhone2rowSetHousehold = new AttributeInfo();
AttributeInfo AddressrowSetHousehold = new AttributeInfo();
* Constructor
public dbInfo() {
try {
jbInit();
sessionVideoDB.publishSession(); <<<<<<ERROR OCCURS HERE
catch (Exception e) {
e.printStackTrace();
private void jbInit() throws Exception {
AddressrowSetHousehold.setName("Address");
HomePhone2rowSetHousehold.setName("HomePhone2");
HomePhone1rowSetHousehold.setName("HomePhone1");
DeleteDaterowSetHousehold.setName("DeleteDate");
CreateDaterowSetHousehold.setName("CreateDate");
PrimaryPersonrowSetHousehold.setName("PrimaryPerson");
ChainHouseholdCategoryIdrowSetHousehold.setName("ChainHouseholdCategoryId");
HomeHouseholdCategoryIdrowSetHousehold.setName("HomeHouseholdCategoryId");
HomeStoreIdrowSetHousehold.setName("HomeStoreId");
ChainIdrowSetHousehold.setName("ChainId");
IdrowSetHousehold.setName("Id");
rowSetHousehold.setAttributeInfo( new AttributeInfo[] {
IdrowSetHousehold,
ChainIdrowSetHousehold,
HomeStoreIdrowSetHousehold,
HomeHouseholdCategoryIdrowSetHousehold,
ChainHouseholdCategoryIdrowSetHousehold,
PrimaryPersonrowSetHousehold,
CreateDaterowSetHousehold,
DeleteDaterowSetHousehold,
HomePhone1rowSetHousehold,
HomePhone2rowSetHousehold,
AddressrowSetHousehold} );
sessionVideoDB.setAppModuleInfo(new ModuleInfo("VideoDB", "VideoDBModule"));
sessionVideoDB.setConnectionInfo(new LocalConnection("VIDEO_SYSOP"));
sessionVideoDB.setName("sessionVideoDB");
rowSetHousehold.setQueryInfo(new QueryViewInfo(
"HouseholdView5",
rowSetHousehold.setSession(sessionVideoDB);
rowSetHousehold.setName("rowSetHousehold");
public static int find(String id)
show("====================value recieved===================");
show(id);
show("===================================================");
String idColumnName = IdrowSetHousehold.getColumnName();
StringBuffer query = new StringBuffer();
if(id.length() > 0)
query.append(idColumnName + " = " + id);
show("id found");
rowSetHousehold.setQueryCondition(query.toString());
rowSetHousehold.executeQuery();
int rowQty = rowSetHousehold.getRowsetAccess().getRowCount();
show("ROW QUANTITY =" + String.valueOf(rowQty));
return rowQty;
}//end find
public static void show(String s)
System.out.println(s);
null -
System Image Utility: NetInstall creation failed
Hi all,
I'm trying to create a NetRestore image. I'm doing this in 10.6.8 Server. I have a .dmg file which is a clone of the "template" hard drive I set up. When I create the NetRestore image, it tells me there's no room left on the device. I'm doing it on a machine with over 350GB of disk space left, so I'm not sure how much space it thinks it needs. below is the output. The dmg file is 49.1GB and contains a disk with a capacity of 159.7GB (110.6GB used). Below is the output. Any ideas? Thanks much!
Jeff
=====================
Starting image creation.
Workflow Started (2014-05-22 08:18:43 -0400)
Mac OS X Server 10.6.8 (10K549), System Image Utility 10.6.7 (448)
Starting action: Define Image Source (1.2)
Finished running action: Define Image Source
Starting action: Create Image (1.5.4)
Starting image creation process...
Create NetInstall Image
Initiating NetInstall from Restore Media.
created: /Volumes/Storage/Library/NetBoot/NetBootSP0/20140515-1068-k2user/System.dmg
Checksumming partition of size 63 blocks...done
Block checksum: ....10....20....30....40....50....60....70....80....90....100
File checksum: ....10....20....30....40....50....60....70....80....90....100
Reordering: ....10....20....30....40....50....60....70....80....90....100asr: successfully scanned image "/Volumes/Storage/Library/NetBoot/NetBootSP0/20140515-1068-k2user/System.dmg"
created: /Volumes/Storage/Library/NetBoot/NetBootSP0/20140515-1068-k2user/NetInstall.dmg
installer: Package name is SIUExtras
installer: Installing at base path /private/tmp/mnt.yp2Bxx
installer: The install was successful.
mv: /tmp/mnt.yp2Bxx/System/Installation/Packages/System.dmg: No space left on device
Script is done.
NetInstall creation failed.
Image creation process finished...
Stopping image creation.
Image creation failed.
Assistant - Selected source:"NetBoot of Mac HD".
=====================I'm getting the same/similar building a 10.10 NetRestore image. How does one get compression to be nice and reliable?
Or is there something else I'm missing? I installed 10.10 and 10.10 server/tools the same day, so should be in sync, right? I'm using a procedure I've done successfully for a long time with Mavericks. Any suggestions, of course, are welcome.
Create NetRestore Image
Initiating NetRestore from installed volume.
Volume Macintosh HD on disk0s2 unmounted
MESSAGE:Preparing imaging engine…
MESSAGE:Reading whole disk (Apple_HFS : 0)…
MESSAGE: (CRC32 $947173A0: whole disk (Apple_HFS : 0))
MESSAGE:Adding resources…
MESSAGE:Elapsed Time: 16m 37.842s
MESSAGE:File size: 55062652965 bytes, Checksum: CRC32 $94912255
MESSAGE:Sectors processed: 1458433608, 185811721 compressed
MESSAGE:Speed: 90.9Mbytes/sec
MESSAGE:Savings: 92.6%
created: /Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/System.dmg
Volume Macintosh HD on disk0s2 mounted
Volume Recovery HD on disk0s3 mounted
Volume Recovery HD on disk0s3 unmounted
Block checksum: ....10....20....30....40....50....60....70....80....90....100
successfully scanned image "/Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/System.dmg"
created: /Users/steve/Desktop/CC2014_oct_Yos_111314.nbi/NetInstall.dmg
mv: /tmp/mnt.wHfAkTH3/Packages/System.dmg: No space left on device
Execution of 'createRestoreFromSources.sh' failed. Cleaning up.
"disk2" unmounted.
"disk2" ejected.
Failed to create image from restore source.
The operation couldn’t be completed. (System Image Utility error 2.)
Image creation process finished...
Stopping image creation. -
La commande STAT à échoué: failed to lock or parse or multiple access
Hi,
I installed Thunderbird 24.4.0 and configured an account in IMAP and everything went fine. Then I configured that same account in POP3 and I'm having the message: "La commande STAT a échoué. Erreur lors de la récupération des tailles et du nombre de messages. Le serveur de courrier XXX a répondu: failed to lock or parse or multiple access." I've been searching the web for an answer and did not find any. I'm just about to remove Thunderbird.
I configured some other IMAP accounts on the same provider and everything works fine. It looks like only the POP3 doesn't work.
I installed Thunderbird 24.4.0 on a Windows 7 x64 computer. I also installed all recent patch in case, but it did not solve the problem.
Hope you can help me. Thanks for any suggestions.Paramètres de base de l'application
Nom: Thunderbird
Version: 24.4.0
Agent utilisateur: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
Dossier de profil: Ouvrir le dossier correspondant
(Lecteur local)
Identifiant de compilation de l'application: 20140316131045
Plugins activés: about:plugins
Configuration de compilation: about:buildconfig
Rapports de plantage: about:crashes
Utilisation mémoire: about:memory
Comptes courrier et groupes
account1:
INCOMING: account1, , (none) Local Folders, plain, passwordCleartext
account2:
INCOMING: account2, , (imap) imap-mail.outlook.com:993, SSL, passwordCleartext
OUTGOING: smtp-mail.outlook.com:587, alwaysSTARTTLS, passwordCleartext, true
account9:
INCOMING: account9, , (pop3) 207.134.105.7:110, plain, passwordCleartext
OUTGOING: relais.videotron.ca:587, plain, passwordCleartext, true
Extensions
Préférences modifiées importantes
Nom: Valeur
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
extensions.lastAppVersion: 24.4.0
font.name.monospace.el: Consolas
font.name.monospace.tr: Consolas
font.name.monospace.x-baltic: Consolas
font.name.monospace.x-central-euro: Consolas
font.name.monospace.x-cyrillic: Consolas
font.name.monospace.x-unicode: Consolas
font.name.monospace.x-western: Consolas
font.name.sans-serif.el: Calibri
font.name.sans-serif.tr: Calibri
font.name.sans-serif.x-baltic: Calibri
font.name.sans-serif.x-central-euro: Calibri
font.name.sans-serif.x-cyrillic: Calibri
font.name.sans-serif.x-unicode: Calibri
font.name.serif.el: Cambria
font.name.serif.tr: Cambria
font.name.serif.x-baltic: Cambria
font.name.serif.x-central-euro: Cambria
font.name.serif.x-cyrillic: Cambria
font.name.serif.x-unicode: Cambria
font.name.serif.x-western: Cambria
font.size.fixed.el: 14
font.size.fixed.tr: 14
font.size.fixed.x-baltic: 14
font.size.fixed.x-central-euro: 14
font.size.fixed.x-cyrillic: 14
font.size.fixed.x-unicode: 14
font.size.fixed.x-western: 14
font.size.variable.el: 17
font.size.variable.tr: 17
font.size.variable.x-baltic: 17
font.size.variable.x-central-euro: 17
font.size.variable.x-cyrillic: 17
font.size.variable.x-unicode: 17
font.size.variable.x-western: 12
mail.openMessageBehavior.version: 1
mailnews.database.global.datastore.id: 655e8821-60e3-4b55-887b-e0a2779889e
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1398527739
places.history.expiration.transient_current_max_pages: 49654
plugin.importedState: true
plugin.state.java: 0
Accélération graphique
Description de la carte: Intel(R) HD Graphics 4000
ID du vendeur: 0x8086
ID du périphérique: 0x0166
RAM de la carte: Unknown
Pilotes de la carte: igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32
Version du pilote: 8.15.10.2712
Date du pilote: 3-26-2012
Direct2D activé: false
DirectWrite activé: false (6.2.9200.16571)
Paramètres ClearType: Paramètres ClearType introuvables
Rendu WebGL: false
Fenêtres avec accélération graphique: 0
AzureCanvasBackend: skia
AzureFallbackCanvasBackend: cairo
AzureContentBackend: none
JavaScript
Ramasse-miettes incrémentiel: 1
Accessibilité
Activée: 0
Empêcher l'accessibilité: 0
Versions des bibliothèques
Version minimale attendue
Version utilisée
NSPR
4.10.2
4.10.2
NSS
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS Util
3.15.4
3.15.4
NSS SSL
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS S/MIME
3.15.4 Basic ECC
3.15.4 Basic ECC -
Failed to lock variable during file move/rename
Hi,
Newbie question. I believe this is one of the most common errors. I found several of them on msdn forum itself but probably there are many ways on achieving this error? Please help.
I am trying to move and rename some images from one folder to another (and yes I have seen the blog by Rafael Salas and many others but none of them helps).
Like moving from \\server1\images\123-456.jpg to \\server2\images\123456.jpg
I am using a foreach.
Source variable is built dynamically. In the first iteration @imagePath = \\server1\images\123-456.jpg ( i checked using messagebox.show)
I have defined @remoteImagePath = \\server2\images\ (which never changes) and @revisedImageName = 123456.jpg (built dynamically in script task using string replace - also checked using messagebox.show)
In FileSystem Task, I am using SourceVariable as @imagePath and using Expressions to define Destination as in @[User::remoteImagePath] + "\\" + @[User::revisedImageName]
Dont know for what reason, I am getting this error
Failed to lock variable "\\server2\images\123456.jpg" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution
of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Please advise.
Thanks.Hi dbqasp,
The error occurs because you have set the IsDestinationPathVariable property to True, and also set the Destination property from the Expressions tab rather than the DestinationVariable property from the General tab of the File System Task. Please understand
that the value of the DestinationVariable property is generated by the Destination property. That is to say, the evaluated value of the Destination property is directly used as the DestinationVariable property. If you open the File System Task editor, you
can find that the value of DestinationVariable property is automatically set to "\\server2\images\123456.jpg" which is the value of the Destination property. Of course, it is an invalid variable name. Actually, the Destination property is usually used when
the IsDestinationPathVariable property is set to False, and we specify the File Connection Manager name in the Destination property.
In your case, you can use the following steps:
Create a new string type variable @remoteImageFullPath, and set its EvaluateAsExpression property to True, and set its expression to "@[User::remoteImagePath]+ "\\" + @[User::revisedImageName]" (wihout quotes).
Delete the Destination property, and set the DestinationVariable property to @[User::remoteImageFullPath] from the General tab.
Regards,
Mike Yin
TechNet Community Support -
FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
*** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
PeriodKey = 5/31/2013 12:00:00 AM
PriorPeriodKey = 4/30/2013 12:00:00 AM
Rule Name = 6001
Execution Mode = FULLREFRESH
System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
Any help Please?
ThanksHi
Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
<[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.RuntimeException
at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221) -
Loading of 'SEOCOMPODF' import package is interrupted with R3load error.
Dear SAP Colleagues,
Please advice with the following, we try to install SAP ERP 6.0 support release 3 on windows 2008 server with oracle database 10g 10.2.0.4.0,
The error is occurred in Import ABAP phase as follow,
ERROR 2010-10-14 12:10:00.729
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
Hint : I already applied this scenario of installation in two other server with same hardware and sap software and itu2019s already up and running,
From my side I applied the following but nothing is changed,
u2022 Applied sap Note 709389
u2022 Replaced the sap source more times,
u2022 Maintained the paging file,
u2022 Restart the sap server
u2022 Restart the installation from scratch
Also I can see that the oracle service and listener is started automatically
I checked the log files mentioned above as follow,
Contents in log file u201Cimport_monitor.javau201D
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) Client VM (build 1.4.2_17-b06, mixed mode)
Import Monitor jobs: running 1, waiting 4, completed 23, failed 0, total 28.
Import Monitor jobs: running 2, waiting 3, completed 23, failed 0, total 28.
Import Monitor jobs: running 3, waiting 2, completed 23, failed 0, total 28.
Loading of 'SEOCOMPODF' import package: ERROR
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 23, failed 3, total 28.
Loading of 'FUPARAREF' import package: ERROR
Import Monitor jobs: running 0, waiting 2, completed 23, failed 3, total 28.
Import Monitor jobs: running 0, waiting 2, completed 23, failed 3, total 28.
Import Monitor jobs: running 1, waiting 1, completed 23, failed 3, total 28.
Loading of 'TODIR' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 23, failed 4, total 28.
Contents in log file u201Cimport_monitoru201D
ERROR: 2010-10-14 12:09:04 com.sap.inst.migmon.LoadTask run
Loading of 'SEOCOMPODF' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i SEOCOMPODF.cmd -dbcodepage 4103 -l SEOCOMPODF.log -stop_on_error' exited with return code 2.
For mode details see 'SEOCOMPODF.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-10-14 12:09:04 com.sap.inst.migmon.LoadTask run
Loading of 'DD03L' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i DD03L.cmd -dbcodepage 4103 -l DD03L.log -stop_on_error' exited with return code 2.
For mode details see 'DD03L.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-10-14 12:09:04 com.sap.inst.migmon.LoadTask run
Loading of 'FUPARAREF' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i FUPARAREF.cmd -dbcodepage 4103 -l FUPARAREF.log -stop_on_error' exited with return code 2.
For mode details see 'FUPARAREF.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2010-10-14 12:09:30 com.sap.inst.migmon.LoadTask run
Loading of 'TODIR' import package is started.
TRACE: 2010-10-14 12:09:30 com.sap.inst.migmon.LoadTask processPackage
Loading of 'TODIR' import package into database:
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i TODIR.cmd -dbcodepage 4103 -l TODIR.log -stop_on_error
ERROR: 2010-10-14 12:09:30 com.sap.inst.migmon.LoadTask run
Loading of 'TODIR' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i TODIR.cmd -dbcodepage 4103 -l TODIR.log -stop_on_error' exited with return code 2.
For mode details see 'TODIR.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2010-10-14 12:10:00
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2010-10-14 12:10:00
4 error(s) during processing of packages.
INFO: 2010-10-14 12:10:00
Import Monitor is stopped.
Regards,
Ahmed SaberHi Gagan Deep Kaushal,
The todir.log file it was so big so I backup it run the installation again to regenerate the log file, please find below the log file you requested,
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20101014135456
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe -i TODIR.cmd -dbcodepage 4103 -l TODIR.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20101014135457
Regards,
Ahmed Saber -
SAPAPPL0,SAPSSEXC,SAPAPPL2 import package is interrupted with R3load
Hi SAP Experts,
I am installing ECC 6.0 SR1 EHP4 with DB29.1 on AIX6.1 but durning Import ABAP , I am getting error
SAPAPPL2' import package is interrupted with R3load error.
SAPAPPL0' import package is interrupted with R3load error.
SAPSSEXC' import package is interrupted with R3load error.
I am attaching all the logs import_monitor,import_monitor.java, SAPAPPL2,SAPAPPL0,SAPSSEXC
Kindly help me to come out from this error.
Import_monitor----
TRACE: 2010-08-19 22:16:46 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL0' import package into database:
/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL0.cmd -dbcodepage 4102 -l SAPAPPL0.log -stop_on_error -loadprocedure fast LOAD
ERROR: 2010-08-19 22:16:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process '/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL2.cmd -dbcodepage 4102 -l SAPAPPL2.log -stop_on_error -loadprocedure fast LOAD' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-08-19 22:16:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process '/usr/sap/LD1/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error -loadprocedure fast LOAD' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2010-08-19 22:18:00 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is interrupted with R3load error.
Process '/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL0.cmd -dbcodepage 4102 -l SAPAPPL0.log -stop_on_error -loadprocedure fast LOAD' exited with return code 2.
For mode details see 'SAPAPPL0.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2010-08-19 22:18:14
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2010-08-19 22:18:14
3 error(s) during processing of packages.
INFO: 2010-08-19 22:18:14
Import Monitor is stopped.
SAPAPPL2
/usr/sap/LD1/SYS/exe/run/R3load: START OF LOG: 20100819221646
/usr/sap/LD1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/LD1/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL2.cmd -dbcodepage 4102 -l SAPAPPL2.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(TSK) ERROR: file /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/DB6/CENTRAL/SAPAPPL2.TSK.bck already seems to exist
a previous run may not have been finished cleanly
file /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/DB6/CENTRAL/SAPAPPL2.TSK possibly corrupted
/usr/sap/LD1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/LD1/SYS/exe/run/R3load: END OF LOG: 20100819221647
SAPAPPL0
/usr/sap/LD1/SYS/exe/run/R3load: START OF LOG: 20100819221646
/usr/sap/LD1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/LD1/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/LD1/SYS/exe/run/R3load -i SAPAPPL0.cmd -dbcodepage 4102 -l SAPAPPL0.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) INFO: /1CN/CPTSAP00005 dropped #20100819221758
(DB) INFO: /1CN/CPTSAP00005 created #20100819221759
(DB) INFO: /1CN/CPTSAP00005~0 created #20100819221759
(DB) INFO: /1CN/CPTSAP00005SC created #20100819221759
(IMP) INFO: import of /1CN/CPTSAP00005 completed (0 rows) #20100819221759
(DB) ERROR: DDL statement failed
( CREATE TABLE "/1CN/CPTSAP00006" ( "CLIENT" SAPDB6FIXCHAR(3) DEFAULT '000' NOT NULL , "VARNUMH" CHAR(16) FOR BIT DATA NOT NULL , "PRT_PARTNER" CHAR(16) FOR BIT DATA NOT NULL , "KSCHL" SAPDB6CHAR(4) DEFAULT ' ' NOT NULL , "OBJECT_ID" CHAR(16) FOR BIT DATA , "TIMESTAMP_TO" SAPDB6CHAR(14) DEFAULT ' ' NOT NULL , "RELEASE_STATUS" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "TIMESTAMP_FROM" SAPDB6CHAR(14) DEFAULT ' ' NOT NULL , "KSCHL_SUPP" SAPDB6CHAR(4) DEFAULT ' ' NOT NULL , "COND_GROUP_ID" CHAR(16) FOR BIT DATA , "MAINT_STATUS" SAPDB6CHAR(2) DEFAULT ' ' NOT NULL , "CREATED_BY" SAPDB6CHAR(12) DEFAULT ' ' NOT NULL , "CREATED_ON" SAPDB6CHAR(8) DEFAULT '00000000' NOT NULL , "KOPOS" SAPDB6FIXCHAR(3) DEFAULT '000' NOT NULL , "SUPP_EXIST" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "SCALE_DIM" SAPDB6FIXCHAR(2) DEFAULT '00' NOT NULL , "KBETR" DECIMAL(15,2) DEFAULT 0 NOT NULL , "KPEIN" DECIMAL(5,0) DEFAULT 0 NOT NULL , "KMEIN" SAPDB6CHAR(3) DEFAULT ' ' NOT NULL , "KONWA" SAPDB6CHAR(5) DEFAULT ' ' NOT NULL , "KRECH" SAPDB6CHAR(3) DEFAULT ' ' NOT NULL ) IN LD1#STABD INDEX IN LD1#STABI LONG IN LD1#STABD )
dsql_exec_immediate returned DS_DBOBJECTEXISTS
(DB) INFO: disconnected from DB
/usr/sap/LD1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/LD1/SYS/exe/run/R3load: END OF LOG: 20100819221800
SAPSSEXC
/usr/sap/LD1/SYS/exe/run/R3load: START OF LOG: 20100819221646
/usr/sap/LD1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/LD1/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/LD1/SYS/exe/run/R3load -i SAPSSEXC.cmd -dbcodepage 4102 -l SAPSSEXC.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) INFO: BRATEXT dropped #20100819221647
(DB) INFO: BRATEXT created #20100819221647
(DB) INFO: BRATEXT~0 created #20100819221647
(IMP) INFO: import of BRATEXT completed (0 rows) #20100819221647
(DB) ERROR: DDL statement failed
( CREATE TABLE "D010INC" ( "MASTER" SAPDB6CHAR(40) DEFAULT ' ' NOT NULL , "INCLUDE" SAPDB6CHAR(40) DEFAULT ' ' NOT NULL ) IN LD1#ES701D INDEX IN LD1#ES701I LONG IN LD1#ES701D )
dsql_exec_immediate returned DS_DBOBJECTEXISTS
(DB) INFO: disconnected from DB
/usr/sap/LD1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/LD1/SYS/exe/run/R3load: END OF LOG: 20100819221647
IMPORT_MONITOR.JAVA
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20100615 (JIT enabled)
J9VM - 20100610_59470_BHdSMr
JIT - 20090210_1447ifx2_r8
GC - 200902_24)
Import Monitor jobs: running 1, waiting 3, completed 24, failed 0, total 28.
Import Monitor jobs: running 2, waiting 2, completed 24, failed 0, total 28.
Import Monitor jobs: running 3, waiting 1, completed 24, failed 0, total 28.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 24, failed 2, total 28.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 24, failed 3, total 28.
PLEASE HELP ANYONE TO RESOLVE THIS ERRORSAPINST.LOG
INFO 2021-03-23 14:09:35
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.14.xml'.
INFO 2021-03-23 14:09:36
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.15.xml'.
INFO 2021-03-23 14:09:40
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2021-03-23 14:10:04
Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.8.xml'.
INFO 2021-03-23 14:10:04
Execute step runMigrationMonitor of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0.
WARNING 2021-03-23 14:10:11
Error 5 (Access is denied.) in execution of a 'RegOpenKeyEx' function, line (645), with parameter (S-1-5-21-1712382466-689420201-920741312-1010).
WARNING 2021-03-23 14:10:11
Error 5 (Access is denied.) in execution of a 'RegOpenKeyEx' function, line (645), with parameter (ProtectedRoots).
INFO 2021-03-23 14:10:11
Switched to user: rasadm.
INFO 2021-03-23 14:10:11
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\import_monitor.java.log.
INFO 2021-03-23 14:10:11
Switched to user: rasadm.
INFO 2021-03-23 14:10:11
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS.
INFO 2021-03-23 14:10:11
Output of C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2021-03-23 14:10:43
Execution of the command "C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Import Monitor jobs: running 1, waiting 3, completed 15, failed 0, total 19.
Import Monitor jobs: running 2, waiting 2, completed 15, failed 0, total 19.
Import Monitor jobs: running 3, waiting 1, completed 15, failed 0, total 19.
Loading of 'SAPAPPL0' import package: ERROR
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 15, failed 2, total 19.
Import Monitor jobs: running 1, waiting 1, completed 15, failed 2, total 19.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 15, failed 3, total 19.
ERROR 2021-03-23 14:10:43
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2021-03-23 14:10:43
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2021-03-23 14:10:45
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2021-03-23 14:10:46
Switched to user: rasadm.
INFO 2021-03-23 14:10:46
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\import_monitor.java.log.
INFO 2021-03-23 14:10:46
Switched to user: rasadm.
INFO 2021-03-23 14:10:46
Working directory changed to C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS.
INFO 2021-03-23 14:10:46
Output of C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst is written to the logfile import_monitor.java.log.
WARNING 2021-03-23 14:11:16
Execution of the command "C:\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_1\EXP1;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_2\EXP2;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_3\EXP3;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_4\EXP4;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_5\EXP5;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP6;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP7;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP8;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP9;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP10;D:\SAP IDES 60\SAP_ERP60_IDES_Export\51032413_6\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe H:\usr\sap\RAS\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Import Monitor jobs: running 1, waiting 3, completed 15, failed 0, total 19.
Import Monitor jobs: running 2, waiting 2, completed 15, failed 0, total 19.
Import Monitor jobs: running 3, waiting 1, completed 15, failed 0, total 19.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 15, failed 1, total 19.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 15, failed 2, total 19.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 15, failed 3, total 19.
ERROR 2021-03-23 14:11:16
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2021-03-23 14:11:16
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Maybe you are looking for
-
Unable to capture SQL Server Schema
I am trying to capture SQL Server 2005 demo schema (AdventureWorks). It does shows the numbers of Tables/Indexes captured..but finishes with this error.. Error ocurred during capture: Exhausted Resultset Column not found. Skipping index detail on ind
-
Missing Artwork after upgrade to version 10
Before upgrading to itunes 10 all my songs had artwork. Now the artwork is missing. Many albums will have the artwork for the first song and then its missing from the other songs in the same album. Does anyone else have this problem?
-
VNext Support for Web and Worker Roles
I see there's support for Azure websites in visual studio 14 CTP for vNext but I can't find any information on when Cloud services WebRole/WorkerRole support is coming? Regards, Pete
-
Flash Lite - Automatic playback of SWF-files within MMS
Dear flash communty, I've the problem that SWF-files doesn't play automatically when I open the MMS I received. I tried to solve the problem with SMIL files, but it seams that the Flash Lite player doesn't support these scripts. Does anyone of you
-
Drawings with Wacom Pen Tablet in CS5
I am aged 66.One of my contacts(22yrs, who is an artist can visualise scenes and draw sketches) and photographer(also doing 2nd year diploma in photography) has shown me the following image and asked how could this be created. I have reasonably good