In CIF customer exit there is no information about the logical system

Dear All,
we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
In the CIF userexit used:
EXIT_SAPLCLOC_001
EXIT_SAPLCSRS_003
EXIT_SAPLPGS1_001
EXIT_SAPLCSTK_001
EXIT_SAPLMEAP_001
there is no information about the logical system (source, destination
etc.) The control parameters are not provided to the user exit.
I found a note 1060634 where the parameter have been added to
EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
Thank you !!
Best Regards , Barbara

Found the answer, to bad i cannot give points to myself :-P
In the ABAP i use the E_T_RANGE output structure.
That structure has several fields (sign, opt, low, high).
In my ABAP i stored the same value in the low and high field.
This should work fine for normal (flat) characteristic values.
However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
For details see: SAP NOTE: 912473
Regards

Similar Messages

Customer Exit for Calendar Month based on the day (system Date)

Hello,
I need help in creating a customer exit for Calendar month without the user input. The logic is as follows:
For the BEx variable created with customer exit option and no user input:
If the day on the system date falls in between 1 to 14 take the calendar year/month value as previous month.
If the day on the system date falls in between 15 through 31 then take the calendar year/month as current month.
eg if report is run on March 24th2009 the calendar year/month variable should be calculated as 03/2009 (March 2009)
if the report is run on March 1st2009 the calendar year/month should be calculated as 02/2009 (Feb 2009).
The code should be effective when run in the first 15 days of Jan when the previous month would contain the previous year as well.
Thank You
Srishti

Thanks Shanthi. I am trying to incorporate the logic when the query is run in beginning of Jan when the year should be the previous year.Following is the code.please let me know if it would work. Is there a way I can test it as well?
CASE I_VNAM.
WHEN 'ZCURCALMON'.
IF i_step = 2.
data: mm(2),
        dd(2),
        yy(4),
        FM(6).
if sy-datum+4(2) EQ 1.
sy-datum(4) = sy-datum(4) - 1.
else.
sy-datum(4) = sy-datum(4).
endif.
if sy-datum+6(2) LE 15.
mm = sy-datum+4(2) - 1.
concatenate sy-datum(4) mm into FM.
else.
concatenate sy-datum(4) sy-datum+4(2) into FM.
endif.
l_s_range-low = FM.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
append l_s_range to e_t_range.
Endif.
ENDCASE.
Thanks
Srishti

Retrieve information about the operating system

Hi, I have an Air application and I need to retrieve
information such as local IP address, local computer name and
operating system user. It is possible?
Thanks,
Anselmo

flash.system.Capabilities.os for operating system. IP and
computer name I don't think you can get in ActionScript. You could
get IP with a web service, but computer name... no idea, unless
it's possible to find it in the file system...

How are you supposed to find the latest podcast if there's little information about the podcast due to the recent iTunes changes?

For example, many of the podcasts for Washington Week all have "Washington Week with Gwen Ifill a..."

You should blur out or cover your login if you post this sort of shot.
Click on the image for the podcast itself:
Better still, click on the 'Subscribe' button and you will get the latest episode downloaded to your Mac as soon as it's posted.

Is there any information about the SPU of OpenSPARCT1 or T2?

hello, I am a student working on the OpenSPARC, in the SPARC core, there is a SPU(stream processing unit) on it. However, there is little information about that unit. I am wondering whether I could have some information or references or websites about the SPU, especially about the instruction which is supporting the cryptographic operations or any operations working on the stream processing unit. Thanks very much!
Best regards

Thank you Sunil, I would like to know how we transfer product allocation from PRA to MM(ERP). This is the key to allow product be moved with TSW solution and MM accounting.
Stephane Lauzonv told us in a meeting held at Buenos Aires yesterday that this can be acheived with a custom development. If you have any information regarding this development We will be very grateful.
Grretings.
Pablo.

SCN Content Submission: Is there any further information on the submission status?

Hi colleagues,
I understand and have read a couple of times that I can contribute content via the content submission (SAML Response from SAP ID Service).
and I see the status "Submitted" for my document.
The question is, is there a way to get more information about the current status of the submitted document? Or is the only information I get the mail "don't call us, we'll call you" , i.e. the automatically generated mail telling me that I'll be informed once the content is published and and that I'll receive a link to the published document?
Cheers,
Jasmin

Hi Jasmin,
You can contact the content team directly at [email protected] to determine the status of your submission.
fyi - After it has been published, you will receive an automatic eMail with the URL.
Jason

Anyone have information about the publicised Free 3 month trial of iCloud for attendees of the Sydney Presentation held last wednesday?

I last purchased product at the release of cs3 and was not allowed to register the software 'because I had had it too long' ... yes, I had several episodes with the Big C and Adobe didn't honour their sale obligations ... should take the case to the Ombudsman ...

If a customer has purchased an earlier full version of product Adobe ought register that product so that it can be use. I purchased product and the tech who looked after the registration which enables you to use the product would not enable the software for use because there was a lag between purchase and request for activation.
Your comment about contacting whoever made the offer of access for attending the presentations is what doesn't make sense because there appears to be no way of contacting the organisers.
Mylenium <[email protected]> wrote:
Mylenium created the discussion
"Anyone have information about the publicised Free 3 month trial of iCloud for attendees of the Sydney Presentation held last wednesday?"
To view the discussion, visit: https://forums.adobe.com/message/6565520#6565520
>

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time.

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy

According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped.

I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father's Ipad2 last night.software is the same my Ipad2's IOS 5.0.1 (9A405), to my surprise it worked properly.

Hi! My name is Nazım . I live in North Cyprus. I’ve got Apple Ipad 2 and Iphone 4. My ıpad2 is iPad 2 Wi-Fi + 3G: Serial number: DQTFFVC1DFJ3., IOS 5.0.1 (9A405), model MC775LL .my itunes is last version. I bought my ipad from America.
I’ve recently bought Philips DC390 from Apple Store in Oxford Street. Althouh Philips dock 1 seemed to work properly (charged and player). The second dock isnot compatible with my ipad2. It didn’t work(play),It charges though.
I sended e-mailed to Philips.uk for assistance. They recomend met o reset my ipad2 to see if this clears any issue, but it does indicate a fault with the unit. It didn’t work either.s(everal time Ireset my Ipad2)
In addition to this, I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father’s Ipad2 last night.software is the same my Ipad2’s IOS 5.0.1 (9A405), to my surprise it worked properly. I’ve already reset my ipad2 several times but it didn’work.
I would be grateful if you could make me some recommendations to sort out the refered my problem.

Hi Nazim
This is a user to user group. There is no-one from Apple here.
Use this link to contact Apple directly.

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
we have developed an application using oracle forms 10g with
oracle database 10g and Application server 10g
Application uses a single Oracle User name to connect to database
where as at Application level there are different users (these are not database users)
Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
USERENV('TERMINAL')
we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
thanks
Chaand Kackria

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

Information about the deleted sales order line item in idoc.

Hi Experts,
I am new to IDOC.We have the following idoc requirement,
When a line item is deleted from the sales order(VA02) ,
the outbound idoc getting triggered for the sales order has the information about the rest all line items other than the deleted line item.We now want the information about the deleted line item in the Idoc .
Please help me in proceeding further.

Hi,
I am facing the same scenario of capturing the deleted sales order line item in idoc.
I am using ORDRSP message type , where in E1EDP01- ACTION contains value "000" .
And the Deletion line item is not been captured, is there any configuration setting required to
capture the deleted line item in Idoc.
Based on the posting in this thread i understand that there is an indicator which has to be set .
Please let me know what is that indicator and how to set it?
Thanks
Sathish

Information about the upcoming version of WLST

Satya,
could you please share some information about the new features of the upcoming version of WLST.
I am asking because currently I am trying very hard to implement Python code to setup our entire WLS 8.1 domains (including custom MBeans with our security providers).
This is maybe useless because with the new version of WLST everything is already available.
Will the new version WLST support the following topics?
- creation / deletion of security realms (including display name)
- creation / deletion of security providers
- addition / removal of security providers to / from a security realm
Against these topics I am currently fighting most :-)
Does anyone have corresponding Python code to share?
Cheers,
Torsten

Torsten, Attached 4 scripts that add atn, atz, audit and remove a provider.
This script creates a new security ATN Provider of type com.bea.atn.MyNewAtnProvider
with object name Security:Name=myrealmMyTestAuthenticator
# The realm name in your weblogic server
realmName = 'Security:Name=myrealm'
realm = ObjectName(realmName)
# The default Identity asserter in your wls
atnIdentProvName = 'Security:Name=myrealmDefaultIdentityAsserter'
atnIdentProv = ObjectName(atnIdentProvName)
# The default authenticator in your wls
atnProvName = 'Security:Name=myrealmDefaultAuthenticator'
atnProv = ObjectName(atnProvName)
# The new provider that you would like to create
newAtnName = 'Security:Name=myrealmMyTestAuthenticator'
newAtnProv = ObjectName(atnTestProvName)
# create the provider
create(newAtnName, 'com.bea.atn.MyNewAtnProvider')
# Now add your newly created authenticator to the default realm
mbs.setAttribute(realm, Attribute('AuthenticationProviders', array([atnProv,atnIdentProv,newAtnProv], ObjectName)))
# set the realm pointer back on the newly created provider
mbs.setAttribute(newAtnProv, Attribute('Realm', realm))
# change the controlFlag's
mbs.setAttribute(atnProv, Attribute('ControlFlag', 'OPTIONAL'))
mbs.setAttribute(newAtnProv, Attribute('ControlFlag', 'REQUIRED'))
This script creates a new Authorizer of type com.bea.atz.MyNewAtzProvider
with object name Security:Name=myrealmMyAtzAuthorizer' and its to the default realm
# this is the default security realm
realmName = 'Security:Name=myrealm'
realm = ObjectName(realmName)
# This is the default authorizer
atzProvName = 'Security:Name=myrealmDefaultAuthorizer'
atzProv = ObjectName(atzProvName)
# New atz provider that you would like to create
myAtzProvName = 'Security:Name=myrealmMyAtzAuthorizer'
atzProv = ObjectName(myAtzProvName)
# create your new authorizer of type com.bea.atz.MyNewAtzProvider
create(myAtzProvName, 'com.bea.atz.MyNewAtzProvider')
# Add the newly created authorizer to the realm
mbs.setAttribute(realm, Attribute('Authorizers', array([atzProv,atzProv], ObjectName)))
# set the authorizer on the realm
mbs.setAttribute(atzProv, Attribute('Realm', realm))
This script creates a default auditor and adds it to the realm
audProvName = 'Security:Name=myrealmDefaultAuditor'
audProv = ObjectName(audProvName)
create(audProvName,'weblogic.security.providers.audit.DefaultAuditor')
mbs.setAttribute(realm, Attribute('Auditors', array([audProv], ObjectName)))
mbs.setAttribute(audProv, Attribute('Realm', realm))
This script removes the deference to the Atn provider that was added and deletes the
atn provider
# The realm name in your weblogic server
realmName = 'Security:Name=myrealm'
realm = ObjectName(realmName)
# The default Identity asserter in your wls
atnIdentProvName = 'Security:Name=myrealmDefaultIdentityAsserter'
atnIdentProv = ObjectName(atnIdentProvName)
# The default authenticator in your wls
atnProvName = 'Security:Name=myrealmDefaultAuthenticator'
atnProv = ObjectName(atnProvName)
delAtnName = 'Security:Name=myrealmMyTestAuthenticator'
delAtnProv = ObjectName(atnTestProvName)
# This will remove the deference of delAtnProv from the realm
mbs.setAttribute(realm, Attribute('AuthenticationProviders', array([atnProv,atnIdentProv], ObjectName)))
delete( delAtnName, 'com.bea.atn.MyNewAtnProvider' )
Thanks,
-satya
Satya,
I will try to put together a script that can dothis
and post it.That would be great.
Thanx.
Torsten

When I complete my information about the creation of the apple Id, the screen show a message I have to find the support of Itunes. Help me

When I complete my information about the creation of the apple Id, the screen show a message I have to find the support of Itunes. Help me

Have you done a Disk Repair and a Disk Permissions Repair?
If that doesn't resolve the problem I would suggest calling customer support about this issue as it is most likely on their (Apple's) end that the problem exists.

Require information about the Role of Data Analyst

Hi All,
I know this might be irrelevent question in this forum, but after a long search, I could not find any suitable place where I can get the information about the role of Data Analyst ( DA ). What all activities the DA needs to perform? Can anyone suggest me anything related to this?
Thanks in advance
Himanshu

As with just about any role, it really depends on the organization. There are dozens if not hundreds of jobs that different organizations might label "Data Analyst." A lot of what a statistician, an economist, or an actuary does would count as data analysis. So would a lot of what a business analyst does. So would a lot of what an software architect does.
Justin

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

In CIF customer exit there is no information about the logical system

Similar Messages

Maybe you are looking for