Install on mac virtual machine windows

I have a Parallels Vitural machine on my Imac running Windows 7 - I need Dreamweaver on the Windows platform to work on sits that have coldfusion and need mysql database etc. When I try to install app - it says it will not install on Network drive - which is what Parallels has Win7 installed - tried moving the app to my Mac Desktop but it will not launch on the OSX because it is an .exe - So how do I get this going?

James-int you will want to make sure and install Dreamweaver within the virtual hard drive in the virtual operating system. You should only be accessing your host operating system for documents.
For information on how to install under Windows 7 please see Help | Download, install, update, or uninstall apps. If you are continuing to experiencing difficulties then what specific error messages are you receiving?

Similar Messages

Known Issue: Windows Emulators Are Not Supported When Visual Studio Installed in a Virtual Machine (Windows 10 Insider Preview SDK and tools, April 2015 release)

If you install Visual Studio 2015 with the Windows 10 Mobile emulators in a virtual machine, setup will succeed but the emulators will not be available as valid debug targets.

The Windows Emulators require a physical machine that runs Windows 8.1 (x64) Professional edition or higher, and a processor that supports Client Hyper-V and Second Level Address Translation (SLAT). The emulators will not run when Visual Studio is installed
in a Virtual Machine (VM).
The emulators for Universal Windows app development work best with Windows 10.

Microphone is not working on Windows 10 Tech Prev installed on a Virtual Machine

Microphone is not working on Windows 10 Tech Prev installed on a Virtual Machine.
What are the recommended troubleshooting procedure?
Thanks,
sistec

Hi,
Audio redirection might not be configured correctly for the virtual machine, I recommend you refer to the audio\sound\usb redirection guide for the type of your virtual machine.
Hyper-V virtual machine
http://blogs.windows.com/bloggingwindows/2013/12/05/overview-client-hyper-v-enhanced-session-mode-in-windows-8-1/
Windows Virtual PC
https://technet.microsoft.com/en-in/library/ee449432(v=ws.10).aspx
If the settings are set correctly, then please check the driver for the
Microphone, update the driver, it also might be a driver compatibility issue with Windows Technical Preview.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can Creative Cloud be installed on a virtual machine?

Can Creative Cloud be installed on a virtual machine?

What do you mean?
Some people with a Mac prefer to use the Windows version of Adobe software, so they install a Windows emulator on their Mac to then run Windows software
If you are asking about installing on a network server... the answer is NO... the programs are made to install on individual computers

Installing the New Virtual Machine and XP Mode in Win7x64 on the Intel 2x E5-2620 Architecture (12 cores, 24 cpus)

I have been hibernating quietly at school with an Intel Core Duo T7300 on XP, and have been insulated from the madness of multi-core processors. I gather that there were problems with installing the XP Virtual Machine on Vista under Quad architectures,
but that these eventually got resolved in 2009.
The newer problem is concerned with installing the XP Virtual Machine on Win7x64 with greater than four cores in the cpu architecture. Others have mentioned this problem over this past Summer 2012. The problem is that at the very last step of
the complete install, Win7x64 reports a failure to install the XP Virtual Machine, and with no further comment.
Apparently KB/2519949 gave a temporary (MSFT qualifies this as "temporary") hotfix solution to this problem for AMD 8-core chips in the Bulldozer series. However MSFT cautions that this problem requires further research. This was earlier
this Summer 2012.
My problem is that I have an Intel 2xE5-2620 duo-processor cpu architecture (2x6=12 cores, 24 cpus in Windows). The cpu architecture is both Intel, and with far more than the old standard of four cores. The XP Virtual Machine in Win7x64 will
not install, as described above.
I have an armload of new 64-bit software all of which has installed pristinely in Win7x64 under this 2xE5-2620 Intel architecture. However, I have one very important piece of legacy (latest version incompatible beyond XP type of legacy) technical writing
software that is critical to my PhD thesis. In need the XP Virtual Machine for this, and I have no idea how to get it. My PhD thesis supervisor also needs this particular piece of "legacy" technical writing software for his new book on Probability
Theory.
1011::1000

I have news about this issue with XP Mode on Workstation machines. I have actually known about this for a couple of months, but it has not been until these Christmas 2012 holidays that I have had a chance to follow up with an implementation.
In review, I purchased a Workstation computer for scientific computation purposes this past August 2012. My chipset is an Intel 2x E5-2620 for a total of 12 cores, and it turns out that this was not the problem for XP Mode. My OEM shipped this
machine with Windows 7, but without XP Mode, and there is a reason why.
As an aside, it should be mentioned that the main line MSFT OS, Windows 7 or 8, is what I want for this machine, and not Server 2012. The reason is that most of the scientific computation and technical writing software that I use is written only for
Windows, and not for Server. Then also hopefully Hyper-V can do in Windows 8 most of what XP Mode is doing for me in Windows 7.
My dealer was able to tell me, when he got back from holidays in late September, that the reason that XP Mode failed to install on this Workstation, and the reason it was not included by the OEM, was that the original HDD configuration was for RAID (3 available
bays) and formatted for drives of at least 1TB in size. Although the original HDD installation was only a single HDD with only 500GB, the machine was equipped to have something much larger installed. But this format excluded the possibility of
XP Mode.
So we changed the hard drive installation to something that I preferred. We installed Windows 7 on a 480GB SSD, and I installed all my software on this drive, as well as all my important data. Most importantly, since this drive is less than 1TB,
we could use the MBR format which allows XP mode. Then we also formatted the original HDD of 500GB in MBR, and decided to run it with Intel RST. This second drive is for unimportant data, and large files. For backup we chose a 2TB USB 3.0
external. In this setting, installing Windows XP Mode was easy, as the only thing we needed to do was modify BIOS to enable virtualization which was part of the Intel 2x E5-2620 chipset already.
I am very pleased with XP Mode. The scientific writing software for my thesis that I was worried about does actually run in Windows 7 under compatibility mode, but there have been some huge advantages to installing in in XP Mode as well. I still have licensed
copies of Office 2003, Acrobat Pro 9, and MathType 5.2, and other old software as well. I now have all new software, for example Office 2010 (64-bit), Acrobat Pro 10 (32-bit for 64-bit), and MathType 6.8 (64-bit), and lots of other things. However, now that
I have my scientific wrtiting software (for which the maker has not caught up with Windows Vista/7) installed in XP Mode, I have also installed WORD 2003 with MathType 5.2 in XP Mode. My scientific writing software can translate WORD 2003/MathType 5.2 in RTF
format to LaTeX. So lets hope these guys eventually catch up with Windows 7 and 8.
I am also using XP Mode to archive a large block of my old data from the XP days. I still have licensed copies of the out of date software. And I would rather not update every single old file I have to a current format. So altogether, XP Mode is working
out quite well. It is very fast with my Intel 2x E5-2620 and maximum RAM.
1011::1000
1011::1000

Can I install both mac os and Windows 7 on MacBook Pro?

Can I install both mac os and Windows 7 on MacBook Pro?
I saw Windows XP picture on this website. And I would like to try mac os while using Windows 7.
And does Windows 7 on MacBook Pro support high quality game experience? Im sick and tired of reducing to low quality graphics to play some nice games such as GTA 4 and new released games. Hope I can play games with high quality.

If you have a brand new MacBook Pro or have installed Lion on an older one, you can only instal Windows 7 on Boot Camp (for some reason you can't use Vista or earlier). If you have a Windows 7 CD and a license, it's pretty easy to do via Boot Camp. See here for instructions: http://support.apple.com/manuals/#macos
If you install via Boot Camp, Windows 7 will run as fast as your computer is. Generally, MacBook Pros are very fast laptops, so you should be pretty good. That being said, just like any laptop, if it's a cheaper MacBook Pro, you won't have access to as capable graphics processing as more high-end machines. So if it's a newer game with crazy impressive graphics, you will likely not be able to tap into the highest settings on the game on any laptop.

Mirroring Arch install to a virtual machine

Hi.
I have a workstation setup based on arch that I am very happy with so far. What I would love is to have the same setup available when Im not at my workstation. The solution I want to explore is to install a virtual machine running arch on my mac and then, using rsync or whatever, keep the system installed in the virtual machine in sync with my workstation. Like if, for instance, I install a package on my workstation it should be synced to the virtual machine. It doesn't seem to me like this would be too hard to get setup, but I'm not sure how much of the system can just be copied considering the difference in hardware settings.
Has anybody got a setup like this up and running? And/or any suggestions as to what would be the best way to achieve it?
Thanks
Peder

What you want to do works with snow leapard server, I think the bastards crippled snow leapard client.
for a work around I am forced to use a usb network adapter and dedicate it to the nic.. this is not optimal.
Have you found a solution yet ? I was going to try netorking kernel extensions from the hackintosh guys.

Installing OBIEE on virtual machine

hi..
i am new to obiee and want to install obiee on virtual machine. ...
please can anyone let me know if there is any link or document which i can use to install obiee on virtual machine where various users can connect connect and use it for some tutorials and training purpose..
many thanks
cheers..

http://download.oracle.com/docs/cd/E10415_01/doc/nav/portal_booklist.htm
http://obiee101.blogspot.com/2009/07/obiee-how-to-get-started.html
http://www.oraclenerd.com/2009/01/learning-oracle-business-intelligence.html

"Installing extensions on virtual machine..." does not complete on Azure VM

When creating VM using my custom disk, I encountered the same issue as the one mentioned in this post(http://blogs.msdn.com/b/mast/archive/2014/06/18/azure-vm-provisioning-stuck-on-quot-installing-extensions-on-virtual-machine-quot.aspx). I can’t
resolve my problem by following the steps of the post.
Here is the context:
Before uploading the disk, I prepare my Ubuntu VM by following this post(http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-linux-create-upload-vhd-ubuntu/) in which there is a step “sudo apt-get install walinuxagent”.
When creating VM, the portal is stuck in "Installing extensions on virtual machine...”.
I can’t SSH to the VM.
I checked the status of VM agent using PowerShell, it shows ‘GuestAgentVersion: Unknown’ and ‘Status: NotReady’.
Could you kindly help me out?

Hi Hulu;
Thank you for your post. Apologies for the late response. From a support perspective the way forward would be to open up a support ticket as we would need to do get the
need subscription id, deploymend id and vm name for further troubleshooting I encourage you to do the same.
Please refer to
this documentation on how to open a support ticket. Hope this helps.
Warm Regards;
Prasant

Is it possible to install SQL Server 2012 Standard Edition on a Windows Server 2012 Standard Which is installed on a Virtual Machine that is created by Hyper-V?

Hi
I have recently bought a Virtual Machine from a data center and installed a Windows Server 2012 Standard Edition on it. As I tried to install the SQL Server 2012 Standard Edition, the data center administrator denied me to do this telling me it is not possible
to install any licensed Microsoft software on a Windows installed on virtual machine created by Hyper-V. It was really strange for me! I wanna know if this is true.
Thanks Everybody

Hi Farid,
For SQL server running on virtual server please refer to following article :
http://blogs.technet.com/b/peeyusht/archive/2010/03/19/sql-licensing-under-virtualization.aspx
In addition , for license issue we still recommend you to contact MS Activation Center:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Error while installing XI on virtual machine

Hi All,
My Scenario: I am installing SAP XI on Windows 2K3 server with Ms SQL as DB and Java 1.4.2_12.
                       I am doing this installation on a VMware virtual machine.
My Problem:   I am facing these error:
ERROR 2007-12-18 20:07:54
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-12-18 20:07:54
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Doublestack_OneHost|ind|ind|ind|ind|3|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|11|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Log File content
import_monitor.java.log
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 17, completed 0, failed 0, total 18.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 17, completed 0, failed 1, total 18.
importmonitor.log_
INFO: 2007-12-18 20:06:24
Import Monitor is started.
CONFIG: 2007-12-18 20:06:24
Application options:
dbCodepage=4103
dbType=MSS
extFiles=no
impJobNum=3
importDirs=C:\NW2004s_Dump\51031504\EXP1;C:\NW2004s_Dump\51031504\EXP2;C:\NW2004s_Dump\51031504\EXP3
installDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\MSS\CENTRAL\AS
jobNum=3
loadArgs= -loadprocedure fast
monitorTimeout=30
orderBy=size
r3loadExe=E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-12-18 20:06:24
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-12-18 20:06:24
List of packages with views: 'SAPVIEW'.
INFO: 2007-12-18 20:06:24
Data codepage 1100 is determined using TOC file 'C:\NW2004s_Dump\51031504\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2007-12-18 20:06:27
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'C:\NW2004s_Dump\51031504\EXP3\DATA\SAPSDIC.STR' for package 'SAPSDIC'.
TRACE: 2007-12-18 20:06:27 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2007-12-18 20:06:27 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\NW2004s_Dump\51031504\EXP3\DATA\SAPSDIC.STR DDLMSS.TPL SAPSDIC.TSK MSS -l SAPSDIC.log
TRACE: 2007-12-18 20:06:27 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 4103 -l SAPSDIC.log -loadprocedure fast
ERROR: 2007-12-18 20:07:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with exception.
com.sap.inst.lib.io.ProcessExitException: Process 'E:\usr\sap\AC3\SYS\exe\uc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 4103 -l SAPSDIC.log -loadprocedure fast' exited with return code -1073741819
*     at com.sap.inst.migmon.LoadTask.loadPackage(LoadTask.java:534)*
*     at com.sap.inst.migmon.LoadTask.processPackage(LoadTask.java:257)*
*     at com.sap.inst.migmon.LoadTask.run(LoadTask.java:176)*
*     at java.lang.Thread.run(Thread.java:534)*
*     at com.sap.inst.lib.util.ThreadDispatcher$ThreadWrapper.run(ThreadDispatcher.java:113)*WARNING: 2007-12-18 20:07:54
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-12-18 20:07:54
18 error(s) during processing of packages.
INFO: 2007-12-18 20:07:54
Import Monitor is stopped.
I also checked the SAPSDIC.tsk file.
Task entry for only one task had errors:
D TADIR I err.
I also read note 455195 but did not get much help to solve this issue.
Please help me!!
Regards,
Sumit

Did you actually run the installer (Setup.exe) after downloading?

How Do I Install On A Virtual Machine

I would like to find out how to install an OS, for example Oracle Unbreakable Linux on my virtual machine with windows xp as the host. Thanks

For a complete overview you can look at Building Virtual Machines and Installing Oracle from Dizwell Informatics.

Accessing oracle installed in a virtual machine through the host

Hi Folks,
I have a 64 bit windows 7 OS and inside it i have an Oracle virtual machine installed (32 bit windows server edition service pack 2). I need to access the virtual machine's oracle from my host environment using sql developer ,toad ,pl sql developer and Sql* plus client (all installed in my windows 7 host 64 bit operating system).what should be the approach .
Thanks
Rahul
Edited by: Rahul K on May 17, 2013 9:12 AM

Rahul K wrote:
Hi Folks,
I have a 64 bit windows 7 OS and inside it i have an Oracle virtual machine installed (32 bit windows server edition service pack 2). I need to access the virtual machine's oracle from my host environment using sql developer ,toad ,pl sql developer and Sql* plus client (all installed in my windows 7 host 64 bit operating system).what should be the approach .
Thanks
Rahul
Edited by: Rahul K on May 17, 2013 9:12 AMExactly like you would if that virtual Windows server were a physical server in your data center.
Install your client products, including the oracle client, on your host os.
Create a tnsames file that has an entry for the database on our virtual server.
Just like a real server, your vm must have a fixed IP address so that client processes will know how to find it.

Installing Pre-built Virtual Machine for Oracle WebCenter Portal error

Hi,
I am trying to install the Pre-built Virtual Machine for Oracle WebCenter Portal: Framework 11gR1 (11.1.1.4.0) onto a Laptop (500G HDD 8G Ram) running Windows 7 to learn.
http://www.oracle.com/technetwork/middleware/webcenter/portal/downloads/owcs-portalfw-vbox-284132.html
I want to run in a VirtualBox Linux setup etc.
I have downloaded all the files except the REAVDD-HOL-WC.ovf which would not download so I saved in browser to the same directory etc.
I have set the preferences in Virtual Box to the same directory where I have downloaded the files to but when I Import Applicance and select C:\users\Tony\Virtual Box VMs and select the defaults and import I get an error box stating:
Failed to import appliance C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC.ovf.
Could not open the medium storage unit 'C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC-disk1.vmdk'.
VD: error VERR_ACCESS_DENIED opening image file 'C:\Users\Tony\VirtualBox VMs\REAVDD-HOL-WC-disk1.vmdk' (VERR_ACCESS_DENIED).
Result Code: VBOX_E_FILE_ERROR (0x80BB0004)
Component: Appliance
Interface: IAppliance {3059cf9e-25c7-4f0b-9fa5-3c42e441670b}
Anybody got any idea how to fix this?
Thanks
Tony
Edited by: 880197 on 19-Aug-2011 03:08
Edited by: 880197 on 19-Aug-2011 03:44

I've imported this appliance (and others) on Windows 7 32-bit on a Lenovo W500, on an iMac, and on a MacBook. The one error you should encounter during the "import appliance" step is a path error related to shared folder (the canned/hard-coded path in the ovf file points to a place that is not likely to exist on your computer, so just comment out the D:\TEMP\Host path, or make it for that matter).



You can alter system set memory_target=300M scope=both and set your VM memory to 2.5GB and everything will run fine (using the vmctl script to start up what's needed). The "1" option is all that is needed for the tutorial shown in the documentation. If you run the admin server, you will see things run a good bit slower. Part of the tutorial assumes you know about UCM and how to take the UCM content in the sample files and upload those into the repository. You can delete the file already loaded and then do a single file upload to "re-load" the various directories/folders for the menu/home/etc. Upload the png and other files into the same folder (menu.html, menuBanner.png, etc. all go into the same Menu folder). It's not worth the time to set the bulk upload because you have to go out into UCM and dig around the admin settings, stop/restart, and so on. You can also use the contentadmin user (welcome1) to do the file upload.

Unable to install on any virtual machine

Dear Sirs! I have download an original iso file these days to install Windows 10 from it when creating virtual machines. I have tried to install it on Virtualbox Vmware player or Hyper-v. The result is the same. The virtual drives are located
on the same partition as the iso file, but in different folders. The hardware virtualization is on. The 3 gb of 8 gb memory are devoted for the machine. Files are copied and components are added during the installation. Then the windows logo with preparation
message appear. It hangs about 2-3 hours. I switch the machine off. Please write if need to wait more or consider the installation as failed. Also write what should I do to solve the situation.
Regards,
Alexander

Hi algusev,
If you still have such issue, you can try another download copy for try, generally, it would take a few hours to finish the installation in Virtual Machine.
Alex Zhao
TechNet Community Support

Install on mac virtual machine windows

Similar Messages

Maybe you are looking for