Installation problem - urgent, PLEASE help!!

I'm trying to install Java3D and somehow it doesn't seem to be working. I'm not sure whether I should be installing the opengl or the
directx version, but I've tried both with no luck. I'm running Windows
M.E.
I downloaded the JSDK beta 1.4 version (I have previously tried also
with the 1.3 version, this didn't work either), and now have the
jdk1.3.1 as a folder on my C drive ( C:\jdk1.3.1) . Then I downloaded
Java3D from the website, onto C, as an executable file. When I clicked
it, it went through the installation process (not giving me any
options for where to install it, i was just clicking on 'next') and
seemed to complete ok, but I'm trying to test it by running the
helloUniverse demo, and the file isn't even there. There's a Java3D
folder which has been created in Windows, but this just contains a
folder called uninstall_info.
On my Java plug-in control Panel, it is currently set to 'use java
plug-in default'. The other options are to use JRE or JDK, in folders
Program Files\JavaSoft or JDK1.3.1 respectively. I don't know which
one I should be choosing! I think I tried it with the JDK option
before and that didn't work either.
If anyone can please help I'd be really grateful, this is getting
quite urgent!

Hi there!
Well, try installing java3d in the same directory as ur java(which is c:\jdk1.3.1 for u).
If i am not mistaken, java3d, by default, installs in c:\jdk1.2.2 directory.
U also have 2 set the path and classpath in the autoexec.bat to addr to \bin and \lib sub-directories resp.

Similar Messages

ACS Certificate installation problem. Please Help !!!

hello,
I have following configuration:
Catalyst 2950G-proximity switches with IOS 12.1(19)EA1c.
Cisco Secure ACS Appliance 3.2.3.11
SunONE Directory Server ldap server version 5.2_Patch_2
I am trying to setup 802.1x authentication for wired and wireless (aironet) clients, with VLAN parameter provided by using group mapping with ldap groups.
I understand that the best for that will be EAP-GTC version of PEAP.
I tried (for a week now!!!) to install the certificate in order to activate PEAP on ACS.
I carefully read and re-read following documents:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacsapp/csapp32/user/sau.htm
and this one
http://www.cisco.com/en/US/products/sw/secursw/ps5338/products_configuration_example09186a008020a45c.shtml
I setup three times a CA using "Microsoft Certificate Services" and OpenSSL. I am positive that Ive done it correctly since each time CA certificate installation worked and each time I found the the CA in the "Certificate Trust List"
The procedure to install the certificate:
1. Install the CA certificate on ACS server (through ftp)
2. Create the Certificate Signing Request and paste in Notepad to make the private key file
3. Paste the Certificate Signing Request into the "base64 encoded PKCS#10..."
4. Get the Server Certificate after issuing and put along with private key file on the ftp server.
When trying to install I get that
"Unsupported private key file format."
message.
The private key file IS the Certificate Signing Request past-ed in a file, Isnt it?!?
I have done that many times. I tried many names and extensions for files. I tried to overcome the UNIX and DOS representation for CR and LF in text files.
Each time the same error message.
same problem like in this thread:
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd61919
Everybody, please help, !!!!

The private key file is a separate file that gets generated by ACS when you create your CSR. I am not sure where the default directory is that it gets stored. You should be able to specify a maximum path for the location that the private key file gets created. Then when you go to import the issued certificate to ACS, you will also need to go back and tell ACS where this private key file is so that it be used.
Steve

Wrt54gs problem URGENT PLEASE HELP

hello, i have had the wrt54gs for about 4 months and my internet has been perfect but about a few a days ago, when i play counter strike source online or anything else i get ridiculous lag and it not able to play (500-600 ping), i have not changed settings or anything. when i watch the network monitor it shows about 4-5 bars on signal strength and link quality but every like 30 seconds it says you are connected to the access point but the internet cannot be found then like 30 seconds later it goes back to normal.
i have upgraded the firmware of my router and linksys helped me change some of the settings on the router but nothing happened.
can you please help me
thanks
pete
Message Edited by Stelth2k1 on 10-27-2007 07:14 PM

If it's working well all the while and only have the problem recently, then I guess it can be the problem on Internet connection link, or ISP side.
Try to connect your computer directly to the DSL/cable modem, then play the game, see anymore lagging..
picoHat
Home Network, Wireless Network and Computer Networking Made Easy

Session and Refresh problem, Urgent, please help

          Hi, Dear Everyone:
          I have two questions to ask. (Environment: OS: Nt4.0, Server: Weblogic5.1)
          (1). When I use session to store an object in servlet (processed results
          from database) then dispatch to a jsp page to display the results, I got the following
          error message.
          Wed May 16 15:54:31 CDT 2001:<I> <ServletContext-General> Generated java file:
          C:\weblogic\myserver\classfiles\jsp_servlet\_ccproject\_subdisplay.java
          java.lang.NullPointerException
          at jsp_servlet._ccproject._subdisplay._jspService(_subdisplay.java, Comp
          iled Code)
          at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
          pl.java:106)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
          pl.java:124)
          at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispat
          cherImpl.java:154)
          at com.voy.CCPro.DataDumper.doPost(DataDumper.java:69)
          at com.voy.CCPro.DataDumper.doGet(DataDumper.java:85)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
          pl.java:106)
          at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
          textImpl.java:907)
          at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
          textImpl.java:851)
          at weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
          ContextManager.java:252)
          at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
          a:364)
          at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:252)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
          Here is my servlet code:
          HttpSession session = req.getSession(true);
          Vector temp = buildData.BuildForDisplay(rst);
          session.setAttribute("PostTitlePool", temp);
          String url = "/ccproject/subdisplay.jsp";
          RequestDispatcher dis = getServletContext().getRequestDispatcher(url);
          dis.forward(req, res);
          Here is my jsp
          <%@ page import="com.voy.CCPro.*" %>
          <%@ page import="java.util.*" %>
          <%
          Vector v = new Vector();
          v = (Vector)session.getAttribute("PostTitlePool");
          Enumeration enum = v.elements();
          SequenceData sq = new SequenceData();
          while(enum.hasMoreElements())
               sq = (SequenceData)enum.nextElement();
               if(sq.getIndicator()==0)
                    out.println(sq.getTitle());
               else
               out.print(sq.getTitle());
          %>
          Please tell me what I did wrong or What more do I need to do?
          (2). If I changed to use request.setAttribute in servlet, it works. But I got another
          strange
          result from browser. That is, if I keep on clicking refresh (IE5.5), the same result
          appending
          the previous one on the same page.
          Here is my code in servlet:
          req.setAttribute("PostTitlePool",temp);
          String url = "/ccproject/subdisplay.jsp";
          RequestDispatcher dis = getServletContext().getRequestDispatcher(url);
          dis.forward(req, res);
          Here is my jsp:
          <%@ page import="com.onvoy.CCPro.*" %>
          <%@ page import="java.util.*" %>
          <%
          Vector v = new Vector();
          v = (Vector)request.getAttribute("PostTitlePool");
          Enumeration enum = v.elements();
          SequenceData sq = new SequenceData();
          while(enum.hasMoreElements())
               sq = (SequenceData)enum.nextElement();
               if(sq.getIndicator()==0)
                    out.println(sq.getTitle());
               else
               out.print(sq.getTitle());
          %>
          Please explain it to me why that and how to fix it. I appreciate it very much.


I control this as follows
--> all JSP's don't create session (<@page session="false">)
--> my FrontServlet checks
session=request.getSession(false);
if(session==null)
//invoke method from LoginHandler (Helper Class)
//for check logindata and create session
else
//invoke method from ProtectedResource (Helper Class)
//for check, if user logged on
--> LoginHandler
//method UserAllowed returns true or false
if(!UserAllowed())
//invoke ServiceDispatcher method who displays
//the 'AccessDenied'Page
else
//set loggedIn into the session
session.setAttribute("loggedIn","OK");
//invoke ServiceDispatcher method to display the requested Page
--> ProtectedResource
//check if user logged in
Object o=session.getAttribute("loggedIn");
if(o==null)
//User not logged in
//invoke ServiceDispatcher method to display 'Login' Page
else
//User logged in
//invoke ServiceDispatcher method to display the requested Page
--> URL of the Application
Welcome: http://localhost:8000/APP/login.jsp
submitted FORM sent to FrontServlet
(FORM ACTION="servlet/FrontServlet")
When everything is alright (username/password)
new URL http://localhost:8000/APP/servlet/FrontServlet
and the 'Main' Page is shown
when session is timed out and i refresh page
data is sent again (without asking for username and password)and new
session is created and the 'Main' Page is shown again.
How can i fix this problem
thank you in advance :-)

Huge icloud problem, urgent please help

So I broke my old iphone and my dad gave me his old one, i restored it to factory settings and then set about putting my icloud recoery on, I signed into to my apple id and icloud, then i got to a terms and conditions page which I agreed to.
HOWEVER and here is the problem, after a small wait of 'it may take a few minutes to set up your apple id' i am presented with a screen saying choose your backup, with various dates on it. I click on the latest one, and it it says
"enter the apple id password for 'email address' to use for store purchases (including the appstore) iTunes store, and iBooks store"
problem is, the email address isn't one i own, i have never seen this email address before in my life it certainly doesnt belong to me, or anybody I know, and I am really rather concerend as all of my backups are in this persons email from aol...
HELP!

Try the following :
1.convert your string to a unicode format and than
compress.
2.decompress and than convert it back to the normal
format.
use following code suitably :
byte [] bytes = null;
try {
bytes = string1.getBytes ("UTF8");//encode
string2 = new String (bytes, "UTF8");//decode
} catch (UnsupportedEncodingException e) {
e.printStackTrace();}
Unless my understading of Java is completely wrong, after the code you've written, string1.equals(string2) should be true.
And that is because string1 is a Java String, in unicode format (all Java strings are in unicode format). So, with
bytes = string1.getBytes ("UTF8");//encodeyou get the bytes of that String coresponding to it's UTF-8 representation. Then,
string2 = new String (bytes, "UTF8");//decodeyou create a new String (in unicode) from the UTF8 bytes representation. In my opinion, string1 is always equal with string2.
Please correct me if I'm wrong...

Ipod touch restore problem *URGENT PLEASE HELP*

Ok well I just inherited an Ipod touch from my friend who upgraded to a iPhone and it has a lock code, which I don't know. I called up my friend and asked him the code, he didn't know it of course... so i just guessed passwords and it said it was locked, I only have one more try until it locks permanently. So, I tried resetting it and it didn,t work. so i put it in recovery mode and it was gonna be ok, but my problem is I have slow dial-up internet and cannot re-download the software because my internet turns off randomly and it takes about 35 hours straight to download the 280MB, my other problem is that every time the download is disrupted, what itunes has already downloaded deletes itself and I have to start over from zero. I cannot fully download the software and have no access to hi-speed internet, I need a solution please otherwise im sitting here with a $300 piece of junk.

Just bring it over to your friends house and have him reset it for you. Then bring it to your house to put your music on it.
It is as simple as that. Too bad you have dial-up still. I use broadband and it is very fast.
Timothy Z.

Urgent, Please help me in this problem.I am getting problem while installation

I am using Windows 8 in my system. I am trying to install Sql Server in system . Everything is fine, but finally when i click on install button i am getting the following error .
please help me quickly. I well be thankful to you.

Triple post meanwhile:
http://social.msdn.microsoft.com/Forums/en-US/7fafa499-ca1e-42f7-a117-73df924d9847/urgent-please-help-me-in-this-problemi-am-getting-problem-while-installation?forum=sqlsetupandupgrade
http://social.msdn.microsoft.com/Forums/en-US/a1c7978c-2f84-495f-a8b6-9e9fe46654d7/getting-problem-while-installing-sql-server-2012?forum=sqlsetupandupgrade
Olaf Helper
[ Blog] [ Xing] [ MVP]

Date format Problem in OAF R12 Urgent Please help!!!

We have acustom application in OAF which was developed in 11i. Now we migrated the same to R12.
In this there are two date fileds getting dispayed on the page and the query for the same is
SELECT TO_CHAR (SYSDATE, 'dd-mm-yyyy') AS CURRENT_DATE, UPPER (TO_CHAR (SYSDATE - 10, 'mon-yy')) AS g_period, UPPER (TO_CHAR (SYSDATE + 5, 'mon-yy')) AS gnext_period, TO_CHAR (sysdate,'dd-mon-yyyy') as today_date, TO_CHAR (sysdate - 1,'dd-mon-yyyy') as yesterday_date FROM DUAL
In 11i version the output is dispaying correctly but in R12 the current date is dispayed as
Start Date 04-Nov-5242
End Date 04-Nov-5241
As per logic it should be
Start Date 09-Feb-2012
End Date 10-Feb-2012
Please help..Urgent issue.

Here are the answers to your problems :
1. Once u restart , the oracle services and the database is not mounting automatically.That is because, when you install the Oracle Oracle8i Standard Edition Release (8.1.7), the two key services namely
OracleOraHome81TNSListner and
OracleService<your SID name>
are configured as manual start ( check the NT --> start>setting>control panel>services. )
For the database to start automatically the next time you start your machine, these two services will have to be put into "Automatic Start" mode.
< for this double click on the respective service, select the "Automatic" radio button and click on ok>.
Now when you restart the machine, your database will be automatically mounted.
2. this as explained above is a corollory to the above problem. you can start or stop your database on NT using the "Services" window....
hope this helps.
bye.
Hi All,
I have installed Oracle Oracle8i Standard Edition Release (8.1.7) from technet site.
I have installed it on windows NT 4.0 .
Installation is fine.
I can access or get into SQL prompt .
I have created a database also.
1st problem
My problem is once I restart the Machine and try to access SQL plus .it gives me an error
ORA-01034: Oracle not available
ORA-27101: shared memory realm does not exist.
2nd problem
I dont know how to start and stop the database , as there is nothing to do that in the start menu of Oracle .
How do i do this .
This is very urgent please help.
regards,
Preeti

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

Encrypting and Decrypting Data(Its Very Urgent, Please Help.)

Hi,
Can anyone tell me some idea in the below mentioned details.
Iam creating a Function for Encrypting and Decrypting Data Values using
DBMS_OBFUSCATION_TOOLKIT with UTL_RAW.CAST_TO_RAW by using
Key Value as normal.
But the problem, is it possible to have the key value more than 8.
Its showing me error when i give the key value less than 8 or more than 8.
Can u tell me why it happens, is that the limit of the key value or is any other way to do that.
Its Very Urgent, Please Help.
Thanks,
Murali.V

Is this what you're looking for?
Usage Notes
If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
C.

Hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode

hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode the problem is i cant even enter my passcode in my ipod touch cause its rebooting over and over again help please guys

- See if this program will place it in recovery mode since that erases the iPod and bypasses the passocode.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try letting the battery fully drain. The try again.

4 level masetr detail problem urgent please

hi all
i have page with 4 level master detail first as a form and other as tables my problem is when i click on a record at the last table the second table stop the partial triger so when i chose any record in table 2 it didnt change data in table 3 and data still as it in table 3 and 4 without changing i need to solve this problem very very urgent
please help me
Edited by: user554540 on 31/12/2009 11:34 ص

Do you have the partialTriggers set correctly on the 3rd and 4th level tables?
As an alternative, you could write a custom selection listener for table 2 and programmatically ppr the 3rd and 4th tables..

Went to open a file in words and got message. "You need a newer version of Pages to open this document." I have latest version. All other files open w/o a problem. Please help.

Went to open a file in words and got message. "You need a newer version of Pages to open this document." I have latest version. All other files in words open w/o a problem. Please help.
Thank you.
<Email Edited by Host>

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Peter

Installed successfully but network is not connected. Yet when I go on my Mac network is connected. Is there any other way to solve this problem? Please help.

Hi,
I have just installed Windows 7 Home Premium on my Mac book Pro 13inch, it installed successfully but there is no network connection. Yet when I go on my Mac I can get online no problem. Please help or what other way I can do to connect windows online?

Did you download Windows Support Software when you started installing windows via Bootcamp. If yes you need to then install the Support Software after installing windows which contains Windows drivers for Mac hardware.

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!

That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs          1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI          5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav          8.0.14
org.virtualbox.kext.VBoxNetAdp          4.2.16
org.virtualbox.kext.VBoxNetFlt          4.2.16
org.virtualbox.kext.VBoxUSB          4.2.16
org.virtualbox.kext.VBoxDrv          4.2.16
com.logmein.driver.LogMeInSoundDriver          1.0.2
com.Greatdy.driver.SystemAudioCapture          1.0.0
com.apple.filesystems.smbfs          1.7.2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleMikeyDriver          2.2.5a5
com.apple.driver.AGPM          100.12.75
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleSMCPDRC          5.0.0d8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics          7.3.2
com.apple.driver.AppleBacklight          170.2.2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleUSBTCButtons          227.6
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
com.apple.driver.AppleUSBTCKeyboard          227.6
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AirPort.Brcm4331          561.7.22
com.apple.driver.AppleSDXC          1.2.2
com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.driver.DspFuncLib          2.2.5a5
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB          7.3.2
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.kext.triggers          1.0
com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
com.apple.iokit.IOBluetoothFamily          4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          230.5
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IOEthernetAVBController          1.0.1b1
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4

Installation problem - urgent, PLEASE help!!

Similar Messages

Maybe you are looking for