IP SLA UDP-ECHO socket error

have this configuration on ASR1002F router. Trying to setup IP Sla so that we can monitor the delay on WAN interfaces. Would like to send UDP-ECHO from one router to another across the WAN. I need to send and receive on fixed port numbers. Keep getting socket errors. any ideas on what i need to do?
no ip sla 5
ip sla 5
udp-echo <dest ip> 65000 source-port 65000 control disable
frequency 5
ip sla schedule 5 life forever start-time now
exit

Was there a "source-ip xx.xx.xx.xx" portion on the "udp-echo 65000 source-port 65000 control disable" line?

Similar Messages

Can i run UDP client and UDP server socket program in the same pc ?

hi all.
when i execute my UDP client socket program and UDP server socket program in the same pc ,
It's will shown the error msg :
"Address already in use: Cannot bind"
but if i run UDP client socket program in the remote pc and UDP server socket program run in local pc , it's will success.
anybody know what's going on ?
any help will be appreciated !

bobby92 wrote:
i have use a specified port for UDP server side , and for client define the server port "DatagramSocket clientSocket= new DatagramSocket(Server_PORT);"Why? The port you provide here is not the target port. It's the local port you listen on. That's only necessary when you want other hosts to connect to you (i.e. when you're acting as a server).
The server should be using that constructor, the client should not be specifying a port.
so when i start the udp server code to listen in local pc , then when i start UDP client code in local pc ,i will get the error "Address already in use: Cannot bind"Because your client tries to bind to the same port that the server already bound to.

H.245 Socket Error

Hello
Im often get the following error in the CDR_log:
Participant "No" (<<IP>>) left the conference
Disconnect reason "H.245 socket error"; Time in conference <Time> ; Participant called in; Protocol "H.323"; Media encryption status "encrypted"
Any Ideas how i can handle this Problem?
Are there any Options/ tools to check where the Problem occurs?
Is this a Problem of an endpoint, or network, system- MCU etc.?
Somtimes i got this error from external endpoints which are connecting to our mcu
Thanks in advance
BR
Alex

Hello
I set the VCSE on log level 3, now im getting a H.225 Error. I ll post the last Logentires from the VCSE.
May 29 13:35:35
tvcs: Event="Call Disconnected" Service="H323" Src-ip="Endpoint A IP" Src-port="11010" Src-alias-type="H323" Src-alias="Endpoint A" Src-alias-type="E164" Src-alias="114312" Dst-alias-type="H323" Dst-alias="
DST-Alias" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="1" UTCTime="2013-05-29 11:35:35,755"
May 29 13:35:30
tvcs: Event="Message Received" Service="H.225" Message-type="DRQ" Src-ip="Endpoint A IP" Src-port="1719" Dst-ip="VCSE_IP_A" Dst-port="1719" Call-serial-number="SN" Tag="TAG" Protocol="UDP" Level="2" UTCTime="2013-05-29 11:35:30,767"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="EndSessionCommand" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,770"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="EndSessionCommand" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,770"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="LCN:3" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,486"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="LCN:3" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,486"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="LCN:2" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,485"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="LCN:2" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,485"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="LCN:1" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,479"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="LCN:1" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,479"
May 29 13:35:23
tvcs: Event="Message Sent" Service="H.245" Message-type="KeepAlive" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:23,125"
May 29 13:35:03
tvcs: Event="Message Sent" Service="H.245" Message-type="RoundTripDelayRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:03,475"
May 29 13:35:03
tvcs: Event="Message Received" Service="H.245" Message-type="RoundTripDelayRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:03,475"
May 29 13:35:03
tvcs: Event="Message Sent" Service="H.245" Message-type="KeepAlive" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:03,124"
May 29 13:34:43
tvcs: Event="Message Sent" Service="H.245" Message-type="KeepAlive" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:43,124"
May 29 13:34:37
tvcs: Event="Message Sent" Service="H.245" Message-type="MiscellaneousCommand" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="VIDEO_FAST_UPDATE_PICTURE" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:37,275"
May 29 13:34:37
tvcs: Event="Message Received" Service="H.245" Message-type="MiscellaneousCommand" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="VIDEO_FAST_UPDATE_PICTURE" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:37,275"
May 29 13:34:33
tvcs: Event="Message Sent" Service="H.245" Message-type="RoundTripDelayResponse" Src-ip="VCSE_IP_A" Src-port="15340" Dst-ip="Endpoint A IP" Dst-port="11011" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:33,480"
May 29 13:34:33
tvcs: Event="Message Received" Service="H.245" Message-type="RoundTripDelayResponse" Src-ip="VCSE_IP_B" Src-port="2776" Dst-ip="VCSE_IP_A" Dst-port="15341" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:33,480"
The Log says that the Codec sent an "End Session Command" but the MCU says H.225 Socket Error.
Are there any Timeouts for Keep alive or something?
Thanks for Your Answer.

When I try to log on to my ichat I get the error message "An undefined AIM socket error has occurred.". How do I resolve this?

The error message "An undefined AIM socket error has occurred." comes up when I try and log on to ichat.

I have the same issue. Does anybody know why this has happened

If I copy the "lcds" folder, Tomcat starts with socket errors

In the documentation it is said that when you create a new server-side application, you can start by copying the 'webapps/lcds' folder. I did that but then, Tomcat starts with some socket errors:
[LCDS]SocketServer 'my-rtmp-SocketServer' failed to pre-validate desired socket settings for BindSocketAddress: 0.0.0.0:2038
java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
[LCDS]SocketServer 'my-rtmp-SocketServer' failed to start.
flex.messaging.LocalizedException: SocketServer 'my-rtmp-SocketServer' cannot bind to accept client connections on port '2038' because another process has already bound the port. Please ensure that multiple endpoints across all applications are not configured to use this same port.
Am I doing something wrong?
Thanks,
Borek

What is happening is that you are getting a port conflict for the socket-based NIO and RTMP endpoints used in the channel definitions in the services-config.xml file of your new web app. The issue is that you have endpoints bound to the same port in the LCDS web and in your new web app.
You can deal with this one of two ways:
Option 1: In that services-config.xml file, search on "RTMP" and "NIO" to find the channel definitions and change the port numbers to something slightly different than the ones used in the LCDS web app.
Options 2: Move the LCDS web app out of the picture so it doesn't get loaded, and just use a template for future web apps. If you aren't using it for any of your development, there is really no reason you have to load it.
I'll add a note about this to the documentation that talks about using the LCDS web app as a template.

Imap performance and socket errors

-bash-3.00$ imsimta version
Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
libimta.so 6.2-8.04 (built 19:28:07, Feb 28 2007)
SunOS vmpm1 5.10 Generic_141414-02 sun4u sparc SUNW,Sun-Fire-V490
We're experiencing imap problems that appear to be load related, and have had to restart mail services several times to restore service. The imap logs show a large number of socket errors. The server load average is in the 1-2 range; there's no apparent memory resource problem. We're seeing 600-1000 simultaneous imap sessions, which is a higher number than in the past. We run JMS & Communications Express on dedicated V490 SPARC server with 8GB of memory. We're planning to add an additional 8GB this Friday.
Our imap configuration settings are as follows:
-bash-3.00$ configutil | grep service.imap
service.imap.enable = 1
service.imap.enablesslport = yes
service.imap.idletimeout = 30
service.imap.maxsessions = 4000
service.imap.maxthreads = 250
service.imap.numprocesses = 1
service.imap.objectclass = top
service.imap.plaintextmincipher = 0
service.imap.port = 143
service.imap.sslcachesize = 0
service.imap.sslport = 993
service.imap.sslusessl = yes
Can you suggest additional troubleshooting steps? Do you recommend any configuration changes?
Thanks.

dpelinka wrote:
Questions:
1. Our JMS version info doesn't state whether it is 32 or 64-bit. Therefore, I assume we are running a 32-bit version. Is that correct?Correct. There is no 64-bit version of MS6.2.
2. Is there a virtual memory limit on the 32-bit version of JMS 6.2? Is the limit greater for JMS 6.3?The Solaris OS imposes the virtual memory size limit of ~3.75GB for all 32bit processes on SPARC. 64-bit processes have a much much larger limit.
http://developers.sun.com/solaris/articles/solaris_memory.html
Regards,
Shane.

Getting "Error Establishing Socket " error while running the application

Hi,
Can Any one help me as I getting the following error while inserting data into database for after some rows and will insert for some rows then again some error . I googled but but didnt get any proper solution.
Soultion what I got it is
1) turn off windows firewall.
2) change server TCP/IP settings.
3) It will give probelm with windows XP SP 2
I tried all but didnt able to solve that.
I am using Java 1.5, MSSQL server 2000,and eclipse 3.2,windows XP SP2
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at com.aztecsoft.quality.DatabaseConnectionQLTYSRV.getCon(DatabaseConnectionQLTYSRV.java:25)
at com.aztecsoft.quality.DatabaseQuery.getDaytoCountRow(DatabaseQuery.java:147)
at com.aztecsoft.quality.ProjectTrackerUtil.getNetworkDays(ProjectTrackerUtil.java:73)
at com.aztecsoft.quality.ProjectPlan.calODurationinDays(ProjectPlan.java:81)
at com.aztecsoft.quality.ProjectPlan.projectSummary(ProjectPlan.java:25)
at com.aztecsoft.quality.ProjectPlan.main(ProjectPlan.java:126)
Thanks in advance.

Hi this is gopi,Hyd.Is your Problem "Getting "Error Establishing Socket " error while running the application" solved if so can you reply me i am waiting for this answer

The system cannot find the file specified.Windows sockets error code:2.

Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.

Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain

Unrecognized Windows Sockets Error: 0: JVM_Bind

I'm not entirely sure if I compacted this well enough, but after class declaration and method calling, it is essentially what my program does.
Server server = new Server(); // Creates a ServerSocket and binds it to a port.
Client client = new Client(server.getSocketAddress());
public Client(SocketAddress bind)
     try
          socket = new Socket();
          socket.bind(bind); // Problem here
          recieve = new Scanner(socket.getInputStream());
          send = new Formatter(socket.getOutputStream());
     catch (IOException e)
          e.printStackTrace();
}Running the above code produces the following exception.
java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
     at java.net.PlainSocketImpl.socketBind(Native Method)
     at java.net.PlainSocketImpl.bind(Unknown Source)
     at java.net.Socket.bind(Unknown Source)
     at GameObjects.PlayArea$Client.<init>(PlayArea.java:318)
     at GameObjects.PlayArea.<init>(PlayArea.java:48)
     at MenuStates.GamePlayState.initializePlayArea(GamePlayState.java:90)
     at MenuStates.CreateGameState.mouseClicked(CreateGameState.java:106)
     at Manager.GameManager.mouseClicked(GameManager.java:428)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Window.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)I don't even know what this exception is, and I can't find anything that will really tell me what is going on. Can anyone tell me what is happening here?
I know that this question isn't directly related to Game Development, but I am using it in a game program, and I posted this question in the Network forum, and they flooded my topic with useless messages, and the only person who actually answered my question was extremely vague about it, even after I asked him to clarify. I am hoping that the good people of this forum will be more helpful.

In some cases, the server socket used to need more time to be available. If you run several test, you need time to reuse the same port (for Windows 7). I could try the following code:
Server server = new Server(); // Creates a ServerSocket and binds it to a port.
Thread.sleep(500); // Waiting for server to be available
Client client = new Client(server.getSocketAddress());
public Client(SocketAddress bind)
     try
          socket = new Socket();
          socket.bind(bind); // Problem here
          recieve = new Scanner(socket.getInputStream());
          send = new Formatter(socket.getOutputStream());
          Thread.sleep(500); // Time to execute the sme port in another test.
     catch (IOException e)
          e.printStackTrace();
}

Unrecognized Windows Sockets error: 10106: create

Am getting the following error when I use tcp-mon to sniff the HTTP traffic. Same when I use SOAP-UI.
I'm using windows 7 and using "jdk1.6.0_13". Any help on this pls .
java.net.SocketException: Unrecognized Windows Sockets error: 10106: create
at java.net.Socket.createImpl(Socket.java:388)
at java.net.Socket.<init>(Socket.java:362)
at java.net.Socket.<init>(Socket.java:180)
at org.apache.ws.commons.tcpmon.SocketWaiter.halt(SocketWaiter.java:98)
at org.apache.ws.commons.tcpmon.Listener.stop(Listener.java:543)
at org.apache.ws.commons.tcpmon.SocketWaiter.run(SocketWaiter.java:87)

Winsock error 10106. 8 seconds in Google. Looks like something wrong with your operating system installation.

Unrecognized Windows Sockets error...

Hello everybody!
I am encountering the following problem, when I try to run a program which wants to access the internet. I pasted an extract from the source code here, which I think includes the critical lines:
import java.net.*;
import java.io.*;
class FindLinks {
public static Vector findLinks (String address) throws Exception {
URL u = new URL(address);
InputStream ins = u.openStream();
InputStreamReader isr = new InputStreamReader(ins);
BufferedReader webPage = new BufferedReader(isr);
When I run the complete program, I get the following message:
Exception in thread "main" java.net.SocketException: Unrecognized Windows Sockets error: 10106: create
at java.net.Socket.createImpl(Socket.java:313)
at java.net.Socket.connect(Socket.java:424)
at java.net.Socket.connect(Socket.java:376)
at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:386)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:602)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:303)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:264)
at sun.net.www.http.HttpClient.New(HttpClient.java:336)
at sun.net.www.http.HttpClient.New(HttpClient.java:317)
at sun.net.www.http.HttpClient.New(HttpClient.java:312)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect HttpURLConnection.java:481)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:472)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:574)
at java.net.URL.openStream(URL.java:960)
at FindLinks.findLinks(FindLinks.java:10)
at FindLinks.main(FindLinks.java:47)
I am using the new Java SDK 1.41 on a Windows XP machine. Does anyone has an idea what might be causing this problem?
Kind regards
Linus

I know, but you triple posted

Socket Error on Recieve

Hi Experts.
when i try to export repository schema (or) Export Change file from the console, it is displaying "Socket Error on Recieve" and i am unable to perform any kind of operation.
I have repaired, refreshed, stoped and started repository and server, but i didn't get any progress on this.
Is any additional settings or operations need to perform at repository or MDM server level...?
Can any one help me what would be the reason for this problem...?
If this is a network issue, then what kind of things need to consider to resolve it..?
Thanks
Bharat

HI Bharat,
This is more to do with MDM server to Data base connectivity.
I think restarting the server can solve your problem,if it does not then check if the same problem exists for other repositories also.Also,check the MDS log file entry.
Thanks,
Ravi

IP-sla udp-jitter / one-way delay no output

Hi *,
i have a question regarding "ip sla udp-jitter".
On some connectins i get an output for the "show ip sla stat" for the _one-way delay_
on other links i don't get an output. The Configuration is always the same and the Probes are running.
NTP is configured but in my opinion the fact weather i get output for the _one-way delay_
or not depends on the ntp root despersion.
Is there a max allowed time differances between the two routes ?
Here one working / one not working output of the same Router but different peers:
Not working::
Latest operation return code: OK
RTT Values:
Number Of RTT: 100RTT Min/Avg/Max: 11/11/13 milliseconds
Latency one-way time:
Number of Latency one-way Samples: 0
Source to Destination Latency one way Min/Avg/Max: 0/0/0 milliseconds
Destination to Source Latency one way Min/Avg/Max: 0/0/0 milliseconds
Working:
Latest operation return code: OK
RTT Values:
Number Of RTT: 100RTT Min/Avg/Max: 12/13/14 milliseconds
Latency one-way time:
Number of Latency one-way Samples: 100
Source to Destination Latency one way Min/Avg/Max: 6/7/8 milliseconds
Destination to Source Latency one way Min/Avg/Max: 5/6/7 milliseconds
I hope one of you can help me to find / fix the problem,
Thanks in advance / Emanuel

Hi everyone,
I have the same doubt.
I did a ip sla configuration on 1841 and 7206VXR and don't show nothing in one-way delay.
----------------------7206---------------------
-ip sla monitor responder
-ip sla monitor 1
- type jitter dest-ipaddr 10.9.105.14 dest-port 16384 source-ipaddr 10.8.20.102 codec g711alaw
- tos 184
-ip sla monitor schedule 1 start-time now
-ntp peer 10.9.105.14
HOST)#show ip sla sta
Round Trip Time (RTT) for       Index 1
        Latest RTT: 507 milliseconds
Latest operation start time: 10:57:36.619 UTC Sun Oct 10 2010
Latest operation return code: OK
RTT Values:
        Number Of RTT: 1000             RTT Min/Avg/Max: 125/507/846 milliseconds
Latency one-way time:
        Number of Latency one-way Samples: 0
        Source to Destination Latency one way Min/Avg/Max: 0/0/0 milliseconds
        Destination to Source Latency one way Min/Avg/Max: 0/0/0 milliseconds
Jitter Time:
        Number of Jitter Samples: 999
        Source to Destination Jitter Min/Avg/Max: 1/1/6 milliseconds
        Destination to Source Jitter Min/Avg/Max: 1/5/23 milliseconds
Packet Loss Values:
        Loss Source to Destination: 0           Loss Destination to Source: 0
        Out Of Sequence: 0      Tail Drop: 0    Packet Late Arrival: 0
Voice Score Values:
        Calculated Planning Impairment Factor (ICPIF): 17
        Mean Opinion Score (MOS): 3.84
Number of successes: 38
Number of failures: 0
Operation time to live: 1347 sec
-------------------------1841-------------------------------
-ip sla monitor responder
-ip sla monitor 1
- type jitter dest-ipaddr 10.8.20.102 dest-port 16384 source-ipaddr 10.9.105.14 codec g711alaw
- tos 184
-ip sla monitor schedule 1 start-time now
-ntp peer 10.8.20.102
3383)#show ip sla monitor statistic
Round trip time (RTT)   Index 1
        Latest RTT: 614 ms
Latest operation start time: 10:50:50.491 UTC Wed Oct 27 2010
Latest operation return code: OK
RTT Values
        Number Of RTT: 999
        RTT Min/Avg/Max: 347/614/867 ms
Latency one-way time milliseconds
        Number of one-way Samples: 0
        Source to Destination one way Min/Avg/Max: 0/0/0 ms
        Destination to Source one way Min/Avg/Max: 0/0/0 ms
Jitter time milliseconds
        Number of SD Jitter Samples: 997
        Number of DS Jitter Samples: 998
        Source to Destination Jitter Min/Avg/Max: 0/6/19 ms
        Destination to Source Jitter Min/Avg/Max: 0/1/3 ms
Packet Loss Values
        Loss Source to Destination: 1           Loss Destination to Source: 0
        Out Of Sequence: 0      Tail Drop: 0    Packet Late Arrival: 0
Voice Score Values
        Calculated Planning Impairment Factor (ICPIF): 20
MOS score: 3.72
Number of successes: 32
Number of failures: 0
Operation time to live: 1668 sec

No more data to read from socket error.

Oracle Version
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - ProductionI am trying a code like below
MERGE INTO TABLE1
( SELECT ...
FROM VIEW1 ) a UNPIVOT ("VALS" FOR cols IN ( .....columns to unpivot.......))
where a.column1='test'
) b ON ( a.id=b.id)
WHEN MATCHED THEN
UPDATE set a.name=b.name
when not matched then
insert (a.id,a.name) values ( b.id,b.name);This code is giving error : No more data to read from socket error.
But when I am trying
MERGE INTO TABLE1
( SELECT ...
FROM VIEW1*
where a.column1='test' ) a UNPIVOT ("VALS" FOR cols IN ( .....columns to unpivot.......))
) b ON ( a.id=b.id)
WHEN MATCHED THEN
UPDATE set a.name=b.name
when not matched then
insert (a.id,a.name) values ( b.id,b.name);It's working properly.
Any idea why I am getting error with code 1?
Edited by: Anupam_Halder on Oct 4, 2012 2:13 PM

You need to look for an Oracle specific error code and message. The error text you have posted does not seem to be an Oracle error.
The error however could result from an ORA-3113 end-of-file on communication channel.
This Oracle error means that the Oracle server process servicing your request (executing SQL or PL/SQL code) ran into a fatal error (potentially an Oracle bug). The server process then proceeds with a "crash dump" - writes an error to the database instance's alert log, writes a trace file and then terminiates abnormally.
It terminates without telling the client and without tearing down the tcp client-server connection. When the client then attempts to use this connection, the socket read fails. No data to read as the socket connection no longer exists.
But this is speculation - we need to see the actual Oracle error (from the server or from the client driver). And you seem to be using an Oracle client that suppresses Oracle error codes and text. Which places a serious question mark over the actual usability of such client s/w for Oracle client-server.

[AGENT] socket error: [object XrayWrapper [object Event]]; readyState=3. Perhaps Helper is not running on ws://127.0.0.1:14821/2 or is shutting down? console.error: onepassword:

hi
in terminal, i am seeing this message.
[AGENT] socket error: [object XrayWrapper [object Event]]; readyState=3. Perhaps Helper is not running on ws://127.0.0.1:14821/2 or is shutting down?
is something missing that should be running
i dont understand this message
thankyou

solved. was a firefox addon called 1password
solved by deleting the desktop version of hte app and reinstalling
1password support was useless. didnt even know a piece of their own software. suggested it was a ffox profile issue. red herring.

IP SLA UDP-ECHO socket error

Similar Messages

Maybe you are looking for