Issue with custom fields mapping from CRM to ECC.

Hi all,
I have issues with replicating custom fields in a Service order. I have created new fields with EEWB and EEWC. Now the structure has been changed in ECC and CRM. But i have to map this fields to correct structures. Also i need some logic to apply.
But i have addressed in couple of threads about the custom function module as in user exit for FI generation.
But i didnt understand the concept of this custom function module. why is this been used?
Could anyone let me know with an good example on how this has to be acheived.
Points are highly awarded.
Kindly reply me.
Thanks,
Kiran...

Hi,
Here you go,
After you create custom characteristics.
1. Do Assign category.
2. Map contents.
3. Double check your master catalog has the mapped content.
4. Publish master catalog.
As per your message, you are not having any error message during import, which tells me that you are one step to close.
Cheers, Renga

Similar Messages

Issue with Custom Field updation through BAPI FM

Hi All,
I am going to update some custom filelds in BUt050. So for these custom fields, I want to fill buffer memory so that I can track the changes through buffer. So I was calling FM BAPI_BUPR_CONTP_CHANGE and passing following parameters.
 businesspartner = < bp number>
 contactperson = < Contact Number>
 validfromdate = '00010101'
 validuntildate = '99991231'
 centraldata = blank
 centraldata_x = blank
I am keeping central data blank as there is no standard field to update.
But it is returning me a message that no changes are made.
can any one has any idea how can I send custom field change in buffer?

As my goal is to update custom fields in BUt050 from WEB UI, I was planning to fill the memory buffer with the changed values by calling FM ''BUB_BUPR_MEMORY_FILL'.
So I have to get memory first. But if I dont call the FM 'BAPI_BUPR_CONTP_CHANGE', then the memory will not be filled.
That is the reason to call the function module.

Business Partner with Classification not replicated from CRM to ECC

Dear CRM gurus,
We have a problem with the replication of Business Partner from CRM to the ECC system. Here's the story:
When we create a Business Partner (General) in CRM, it gets replicated to ECC. But when we create a Sold-to-Party Business Partner with Classification Customer, it does not get replicated to ECC. Can anyone of you advice to me what could be the possible error in the configuration? I have already make the neccessary mapping in tcode PIDE.
In ECC system, do we have to maintain the same number range value for SD customer AND also for Business Partner?
Desperately need help! Points will be generously rewarded.

Hi guys,
most likely your field settings on the ECC side for the different BP role will be different. I assume you will have a mandatory field for the sold-to party role in ECC that yo don't provide during the replication. If you check the BDOC errors in txn SMW01 it will give you an error "fill in all required fields".
One standard stumbling block is the field "language key" under communication data....
I hope that's what is causing the problem
cheers
Jens

Classic Scenario- Service Item custom field transfer from SRM to ECC

Hello Experts,
I was looking for a way to transfer custom fields from SRM to ECC(PR/PO) for service items.I am on SRM 7.01 and ECC 6.0 ehp 5.
The same custom fields are getting transferred for Material item using the BADI BBP_CREATE_BE_RQ_NEW.
But the same badi doesnt work for service item transfer.
I would appreciate it if someone could help me with this.
Regards,
Cruiser

You can use the Function Module SPOOL_RQ_CREATE with the parameters as bellow and debug.
REQNO = SC number
REQUIS_NUMBER = as Purchase Req no ( from backend )
IV_BE_LOGSYS = backend logical system.
System will go through the same path as SC bridging to PR.
HTH,
Chandu
Edited by: Chandrahasan H on Mar 23, 2011 3:36 PM

What are the steps to send sales order custom field from CRM to ECC

Hi Xperts,
We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
Thanks in Advance.

Hi Anjaneyulu,
We are faced with a similar situation as you.
Here is our scenario with the steps that we performed so far:
1. We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
2. On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
Could you please give us the steps that you have done.

Custom fields replication in sales order from CRM to ECC

Hi Experts,
We have added a few custom fields in CRM 7.0 (Ehp1) using AET. The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
What is it that we have to do to ensure that custom fields are also replicated to ECC. Do we need to maintain field mapping between CRM and ECC, for custom fields, manually. How and where do we have to maintain the mapping. Also, please let me know the BADIs / exits that need to be implemented to achieve the above functionality
Regards,
Manohar

Hi Manohar
You can map these custom fields using the badi CRM_DATAEXCHG_BADI. Please see the documentation of the badi in SE18 in your system for further details.
Regards
Gavin

Replication of storage loaction issue from crm to ecc

HI Experts ,
I am facing issue while store location replication from CRM to ECC.
I have create field "Hub Location" using AET on web ui and behind that store location search field is working .
I have already created a Order . I have copied that order .Add store location .
When i save Now all process executed and BDOC execute successfully with no error .
I have enhanced BADI data exchange and add code in method crm_dataexchange_after_fill method and added store location .
Issue : Now when i go-to to crmd_order transaction and checked that order then i am getting error that Store location plant is not defined .
Please help .
Regards ,
Rishi

Hi Rashi,
Sorry for the late reply.
Goto ECC system and find the FM "BAPI_SALESDOCU_PROXY_UPLOAD" and set the break point using your RFC user id (RFC user id from CRM to ECC and RFC user id should have the debug rights).
Once you create the order in CRM and it will come to debug in ECC.
Check TI_EXTENSION_IN tables whether your values are coming in.
If not your CRM Middleware BADI coding was not done correctly.
Hope this would help you.
Regards,
Bala

Custom fields mapping issue of sales order replication from R/3 to CRM

Hello Experts,
I have to replicate sales orders from R/3 to CRM system (Initial and Delta)
The issue is I have custome fields in R/3 which are maintained in custom table(Z table) in R/3.
We added those custom fields in CRM customer_i table to synchronise with R/3 data.
To MAP R/3 custom fields to CRM custom fields, i have the following customization.
1. Added the custom function module in the event CRMO_200 and moved all the custom fields into interal table IT_OTHER_INFO.
2. The intrnal table IT_OTHER_INFO with data is passed into CRM standard function modules.
3. But in CRM the BADI 'CRM_DATAEXCHG_BADI' implementation does not have the input parameter of internal table TI_OTHER_INFO.
All my custom data is in internal table TI_OTHER_INFO.
Please suggest where can i map this data to CRM enhanced fields.
Regards,
Umashankar.

Hello Vanessa,
Thank you so much for your reply.
I went through the Note (1053817). It is good. I understand that the custom fields should enhance in the BAPE_VBAP in R/3.
My Scenario:
Goal: Orders replication from R/3 to CRM along with Custom fields.
In R/3, all the custom fields are maintained in Z table (Not VBAK or VBAP).
All these custom fields are belongs to Item level.
In CRM, The custom fields are maintained in CRMD_CUSTOMER_I table though AET.
I need to MAP these custom fields to CRM while order replication from R/3 to CRM.
Regards,
Umashankar.

Replication of custom z fields from CRM to ECC

Hello,
I have created custom fields in CRM - Order using EEWB. Similarly I have created custom fields in ECC - VBAK. I want to replicate these custom fields from CRM to ECC. Somebody had suggested to use CRM_DATAEXCHG_BADI and method - CRM_DATAEXCHG_AFTER_BAPI_FILL. Can anybody give me a sample code of how to populate table - CT_BAPIPAREX within this method?
Process followed was -
1. ECC - Extend VBAK with zfld1
2. ECC - Extend BAPE_VBAK, BAPE_VBAKX with zfld1
3. CRM - Add zdoc1 using EEWB
4. CRM - Extend BAPE_VBAK, BAPE_VBAKX with zfld1 (same as ECC?)
5. CRM - CRM_DATAEXCHG_BADI and method - CRM_DATAEXCHG_AFTER_BAPI_FILL. - This is where I need to map zdoc1 of CRM to zfld1 of ECC. And then populate CT_BAPIIPAREX. This is where I am stuck.
Thanks!

HI,
If you have added field in EEWB chosen R/3 Adapter, then it will also enhance the Exchange structures and thus i guess CRM_DATAXCHange_badi shud contain in one of its changing parameters
The following blogs gives a good idea in the similar lines.
/people/vikash.krishna/blog/2009/07/21/exchange-ecc-customer-master-standard-field-with-the-crm-z-fields-ecc--crm
/people/vikash.krishna/blog/2009/07/14/crm-70-how-to--4-adding-custom-fields-with-the-new-application-enhancement-tool-aet
Revert if you need further help.
-Satish

Replication of custom-fields in BP from CRM to ECC

Hello all,
I have created additonal attributes for a Business Partner in CRM7.0 (ZZKATR1 and ZZKATR2) using the tool AET.
In ECC I've added these attributes to tabel KNA1 using an append structure.
The replication of the BP from CRM to ECC is already working fine.
So when I change a standard field this is replicated succesfully.
Only now I want to enhance this replication with these additional attributes (custom-fields ZZKATR1 and ZZKATR2).
So they also appear in ECC in table KNA1.
Can anyone tell me how this is done? And what steps I have to take?
Thanks a lot.
Marco

Hello Marco,
Please see note 736595 and also the links below explaining the scenarios.
http://wiki.sdn.sap.com/wiki/display/CRM/EnhancingtheCRMMiddlewareExample2
/people/vikash.krishna/blog/2009/07/21/exchange-ecc-customer-master-standard-field-with-the-crm-z-fields-ecc--crm
I hope this helps.
Kind regards,
Vanessa

Example of a custom field mapping?

Ok, I admit it I am struggling here. I have simplified my example from
what I actually have.
I have a table that models a flat hierarchy
ID | START_DATE | END_DATE | CLASSNAME | FIELD1 | FIELD2 | ...
one of the objects in my hiearchy (CashFlow) has a field that is in fact
another object called DatePeriod that contains two fields startDate and
endDate.
I understand that what I am trying to do is embed the DatePeriod object
inside of the larger object when it get's persisted.
I have the following metadata set-up
<class name="CashFlow" persistence-capable-superclass="InstrumentFlow">
<extension vendor-name="kodo" key="table" value="INSTRUMENT_FLOW"/>
<extension vendor-name="kodo" key="pk-column" value="ID"/>
<extension vendor-name="kodo" key="class-column" value="none"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<field name="accrualPeriod" embedded="true"/>
</class>
and for my DatePeriod object
<class name="DatePeriod">
<extension vendor-name="kodo" key="table" value="INSTRUMENT_FLOW"/>
<extension vendor-name="kodo" key="pk-column" value="ID"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="class-column" value="none"/>
<field name="startDate">
<extension vendor-name="kodo" key="data-column" value="START_DATE"/>
</field>
<field name="endDate">
<extension vendor-name="kodo" key="data-column" value="END_DATE"/>
</field>
</class>
Every time I try to fetch a CashFlow object I get an error as KODO is
trying to select the column 'ACCRUALPERIODX.'
What am I doing wrong? Do I need to use a custom field mapping? If so
where is the documentation to help me write a custom field mapping?
A second question would be what happens if the DatePeriod object is used
in a couple of places, I don't want to tie it's persistence to the
INSTRUMENT_FLOW table.
All help gratefully received
Cheers
Matt

As you suspect, Kodo 2.x does not support embedded class mappings. Kodo
3.0 will support embedded mappings.
In the meantime, you can create a custom mapping, but unfortunately our
documentation for custom mappings is lacking right now. Given how simple
your DatePeriod object is, you're probably better off with something
simpler (and as a bonus, less bound to Kodo):
Just make your DatePeriod class and the field that holds the DatePeriod
instance non-persistent. In the class that has the (now non-persistent)
DatePeriod field, add two new persistent fields for the startDate and
endDate. Then just use internal logic to construct the DatePeriod from
the startDate and endDate. You can do this using the
javax.jdo.InstanceCallbacks methods, or just do the logic in your setter
and getter methods for the DatePeriod.

Extending the Search Object of a BOL Entity with custom fields

Hi All,
I have to enhance the structure of the BOL search object 'BuilHeaderSearch' with custom fields!.
i went to the transaction genil_bol_browser and find out the structure of the object as, 'CRMST_HEADER_SEARCH_BUIL'
how can i insert custom fields into this structure, so that i can display these custom fields at the Front end ( Web IC ).
Thanks in advance,
sudeep v d.

Hi Sudeep!
First of all it should be mentioned that: it is NOT possible to change list of SEARCH criteria in IC!
So, in other words, you can search BP ONLY by params listed in native structure 'CRMST_HEADER_SEARCH_BUIL'.
BUT: You can FILTER search results!
For example: you get the list of BP with MC_NAME1 (lastname) search criteria (only by SAP class!)and THEN you can filter (delete from list) by YOUR criteria (in your class!).
Is it clear?
So how to add your own criteria?
1. Transaction GENIL_MODEL_BROWSER - Model Browser forGen.IL Applications
2. Component Set - ALL
3. Search Objects -> BuilHeaderSearch -> Attribute Structure ->CRMST_HEADER_SEARCH_BUIL (Dbl Click)
4. Append Structure (or F5)
5. Name the new sub-structure and provide all new fields
So now you can use this new fields in IC Z-classes.
I had the same task and nobody in SDN could help - so I had bought new SAP_book: <a href="http://www.sappress.com/product.cfm?account=&product=H1909">mySAP CRM Interaction Center</a> because in Contents there were:
"Extending the Business Partner Search in IC WebClient by New Search Fields".
So in fact it is not truth: it is not possible to extend search. You can only filter results!
BUT!
It is not the end of my post! I hope that SAP people will see this post. I found a BUG in SAP classes and methods: it is not possible to navigate to first position in collection wraper!
exactly:
lr_current ?= entity_col->if_bol_bo_col~get_first( ).
doesn't work.
So position of cursor puts on second record in structure!
In other words it is not possible to filter the first record in search result! And so new search is not efficient
I think that is is bug and wait for comments of SAP.
Reward points if it helps.
Regards,
Alexander

Use of FM BAPI_EQUI_CHANGE to update equipement with customer fields

Hello all
I have extended the EQUI table with customer fields using customer include structure and append structure.
I want to populate these customer fields with BAPI BAPI_EQUI_CHANGE Or BAPI_EQUI_CREATE.
So I have extended the structure ITOB appending the same customer fields as in table EQUI.
I have enhanced the function MAPXI_BAPI_ITOB_TO_ITOB which map data from structure BAPI_ITOB to internal structure ITOB.
But the fields are not populated ?
Has someone already the BAPI in that way ?
Thanks
Jerome

Hello all
I have extended the EQUI table with customer fields using customer include structure and append structure.
I want to populate these customer fields with BAPI BAPI_EQUI_CHANGE Or BAPI_EQUI_CREATE.
So I have extended the structure ITOB appending the same customer fields as in table EQUI.
I have enhanced the function MAPXI_BAPI_ITOB_TO_ITOB which map data from structure BAPI_ITOB to internal structure ITOB.
But the fields are not populated ?
Has someone already the BAPI in that way ?
Thanks
Jerome

Issue with special characters in SAP CRM ICSS application.

Hi ,
I have issue with the special character in CRM web application.
1. In CRM IC Webclient application(5.0) . i am copying and pasting some special characters in the description of the service request document. then this is saving the character as it is.
But when i am opening the same service request in SAP CRM ICSS(Internet Customer Self-Service) application, then the special characters are converting to different characters.
I am not sure whether this is the right forum for this or not.
Can anyone please suggest how can i correct this. Or is there any standard solution to handle the special characters in ICSS.
Thanks
Sudhansu

misunderstood =/
Original (Coming - output): "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
it's in output but what is data in database ?
sorry but without knowing about source data for forming the xml i haven't ideas about your problem
in db it's "TM " or "™" or ... ?
Original (Coming - output): "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
Something like XAE or "K" after PAY Value in the xml tag and continued the text value. (Tag value is not getting copied exactly here - i am sorry for that )
that's ok. i need to see the problem not the data as is
Expected (output): "Here it needs to produce the "PAY TM" (Here "TM" should be super scripted to "PAY" Value in tag).
as super scripted in xml?
as idea - you can have <PAY_TXT>PAY TM</PAY_TXT> and in publisher set TM as super
Designing XSL Subtemplates - 11g Release 1 (11.1.1)

AFABN - RAPOST2000 - depreciation posting granularity with customer field

Hi,
My Client implemented a "ZABC" customer field in the new GL accounting (via FI new GL / ledgers / customer field).
This ZABC field is maintained in the asset masterdata.
During monthly depreciation run (AFABN) we would like to have postings done at GL account/ Cost Center / ZABC level in order to have depreciation postings sort by ZABC values in a dedicated financial reporting.
ZABC field is not a cost object, so no entry can be maintained in IMG "Account assignment Elements for AA"
We checked oss Note 1131960 (Documentation: Business Add-Ins for new deprec. calculation) to get explanation for
Business Add-Ins FAA_DC_CUSTOMER and FAA_EE_CUSTOMER.
These 2 BAPI give options for segmentation or new way for depreciation calculation, however, our client requirement is to change only the depreciation posting granularity (GL account/ Cost Center / ZABC) instead of GL account/ Cost Centers
How did you answer similar requests using New GL customer field ?
Thanks,
Arnaud

Hi,
I think you need to create Z-include in ABAP so that depreciation docs are also posted with these custom fields.
From 4.7 onwards, the depreciation program is RAPOST2000. In RAPOST2000, there is no longer batch input. It post directly to GL.
For the difference between RABUCH00 and RAPOST2000, please refer to SAP Note 683313.
Thanks
Aravind

Issue with custom fields mapping from CRM to ECC.

Similar Messages

Maybe you are looking for