Java system refresh issue- NW701

Hi,
We are facing an issue below.
Scenerio- Standalone Java stack copy
Status- I have exported the source system using sap installer, now I am running sapinstaller to import the source system (exported DB).
Issue- When I am running sapinstaller on target system to import - it is not asking anywhere the location of exported source system and skipping this step.
Environment- SAP CRM700/NW 701 EHP1, AIX 5.3, DB2 9.5.
Any help on this would really be appriciated.
Regards
Harsh

SAP CRM 700 SR1->Software Life Cycle options->system copy->IBM db2 for Linux, unix and windows->Target System installation->Central system->Based on AS- Java->Central system
I have selected standard system copy.

Similar Messages

DB refresh on Netweaver 7.0 ABAP+JAVA system - Issue

Dear Folks
I am having an issue with starting the Java instance after system copy.
This is the situation
System QAS database was refreshed from system PRD.
Both the systems are on NW 7.0 Ehp1 SP 18, in a HPUX/ORACLE environment.
Our normal landscape is full of R3 systems so teh DBA's have been historically doing DB refresh by copying for teh Oracle fileystems and then renaming the schema and some post db refresh activities to get the DB in teh target system up and running. Pardon my terminologies I ma not a DBA. The abpove procedure has worked fine with R3 systems.
But with the above mentioned Netweaver system ABAP instance is running fine after refresh while Java instance is not since SMSICM-> Goto-> HTTP Server -> DIsplay Data is showing
HTTP Application Server Handler
ABAP Server operational        = TRUE
J2EE Server configured         = TRUE
J2EE HTTP port                 =
J2EE HTTPS port                =
J2EE Server operational        = FALSE
Default root access handler    = ABAP
URL Prefix Table loaded        = TRUE
There are no other dumps or errors in the system and teh startup logs do not show any error. I have looked up online and the System Copy Guide for 7.0 systems and I understand SAP recommends using sapinst. But I would like to know if there is a workaround to fix the j2ee instance.
I have seen a few forumns where people have had similar issues but no solution.
FYI, The the Instance_IDXXXXX in the SAP J2EE Engine- Config Tool in system QAS is that of PRD and there is no entry for the instance ID of the QAS system.
I have tried changing all the entries that are pointing to PRD under Cluster_Data-> Instance.properties.IDXXXX to that of QAS and saved and restarted but no luck as the Instance_IDXXXXX of QAS does not show up in teh config Tool menu.
All the properties files at teh OS level are pointing correctly to QAS, so I would liek to know if there is any way to change the config on eth DB level.
Thanks in advance.
sapkid

Hi,
When you go for ABAP+JAVA system refresh please always ose the JAVA export method .
Take the JAVA export of the source system with the help of sapinst.Check the j2ee_admin and the ddic password of source system.
then you need to get the offline backup of the Source system.
then import it on the target system wth the help of sapinst and in the middle it shall promt you to restore from the backup of the source system.
Always use this method as JAVA stores it file at file system level and in the database.So you need both the files .
Thanks Rishi Abrol

System Refresh: Abap+Java stack

Have a few questions about CRM refresh I'm working on. Done many refreshes over the years and the new process has me shaking my head in disbelief.
Performed a normal system refresh, by restoring online backup of production system onto mirror system. The mirror system exactly matches my production sytem (Oracle 10g, SuSE Linux 64 bit, UNICODE).
Now my system is running from Abap stack perspective, however Java components fail to load.
Now from reading the documentation (System Copy for SAP, Based on SAP Netweaver 2004s Abap+Java) it appears that I have to use sapinst and no longer use online database backups for system refreshes.
Is this the case? Has the investment my organization made into online backups now worthless?
Is there a way to take the java schema in this online copied database and bring it online after converting it to work on the mirror landscape?
Or should I throw out our system methodology and start new

Thank you for the reply.
Reading SAP's documentation seems to imply that I need to extract out the java schema from my production source and then re-install on my QA target to make a refresh of the java stack possible.
However, if I have a complete copy of my source system database working on the target, why is the extract necessary?
At least, I should be able to extract out the contents from the source as if it was the target, thereby eliminating any sort of production outages (we have many constraints about shutting down production from fuctional perspective).
I'll do some research around the other tools mentioned to see if they can lend a hand fixing the issue,

JSPM patching issue after system refresh

We have recently done a System Refresh of Java-Addin box from a source system whic was on SP-13 on to a target system which was on SP-14.
After the refresh we found the target system is now on SP13.   When I tried to apply SP-14, JSPM reports that the patch is already applied. How do I go about ? Does this mean that SP-14 is already existing. How to make the system recognise that the current patch is on SP-13. What needs to be done?
Thanks in advance.
Umamahesh

This is not a bug in JSPM, if the System Refresh is done through SAPINST you shouldn't have such issues.
I think that since some of the files in J2EE are not updated after the manual system refresh and JSPM must be pointing to the earlier Patch level.
Especially files under ..../bootstrap/SAP AG are not updated
In JSPM by default the forcemode is disabled so given the manual way to enable the option
Hope this is clear
Regards
Shaji

System Refresh getting error "Your System has corresponding JAVA stack"

Hello Experts,
I am trying to do a system refresh on my HCM system which is ABAP only.
When I run SWPM --> Generic Installation Options -->MS SQL Server --> Database Tools --> Database copy completion, I get the following error.
Version Information is as follows:
Kernal is 721
ECC 6.0 Basis 702 level 9 (Netweaver 7.02)
Windows server is 2008 R2 standard
MSSQL is 10.50.4000
Yes, I have done my research and failed also has a High OSS message open with SAP. This issue is very critical so any help as early as possible is highly appreciated.
Thank You.

Hi Muhammad,
It looks like you have a Java schema in your database, and sapinst is finding that and therefore assuming it's a double-stack system. Perhaps this system used to be double-stack at one time, and then was split? In the trace file I saw the following entries, at different points:
SID: HCT
DbServer: USALSQLT01\HCMT
DbName: HCT
ABAP Schema: hct
Java Schema: SAPHCTDB
TRACE      2014-04-18 09:26:36.318
Found corresponding java schema SAPHCPDB. Aborting.
TRACE      2014-04-18 09:26:36.333 [iaxxgenimp.cpp:325]
           CGuiEngineImp::showDialogCalledByJs()
showing dlg d_doubleStackSystemError
TRACE      2014-04-18 09:26:36.333 [iaxxgenimp.cpp:335]
           CGuiEngineImp::showDialogCalledByJs()
<dialog sid="d_doubleStackSystemError">
<title>Unsupported System</title>
<dialog/>
So, that seems to be the cause. If you're sure this is only supposed to be a single-stack ABAP system, you might try deleting the SAPHCPDB schema using database tools and then re-running sapinst.
While you're at it, it looks like you might have an old copy of Sun JRE 1.4.2 still installed (perhaps from the old days when that version was required to run sapinst). In the environment variables in the trace I saw:
JAVA_HOME=C:\j2sdk1.4.2_29-x64
You might want to uninstall that if you don't need it anymore, and unset that environment variable. Also, your swap size looks low for a 64-bit system with 8 GB RAM, even for a test system:
Swap size (MB): 9998.18
Best regards,
Matt

Regarding Sun Java System Application Server Issue with JVM

Regarding Sun Java System Application Server Issue with JVM
Hi
I have installed SJSAS9.1 on solaris system. I m trying to deploy war file which i compiled in windows enviorment by jdk1.5.0_05. Every time i got the following error :
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: PWC6033: Unable to compile class for JSP
PWC6199: Generated servlet error:
[javac] javac: invalid target release: 1.5
[javac] Usage: javac
[javac] where possible options include:
[javac] -g Generate all debugging info
[javac] -g:none Generate no debugging info
[javac] -g:{lines,vars,source} Generate only some debugging info
[javac] -nowarn Generate no warnings
[javac] -verbose Output messages about what the compiler is doing
[javac] -deprecation Output source locations where deprecated APIs are used
[javac] -classpath Specify where to find user class files
[javac] -sourcepath Specify where to find input source files
[javac] -bootclasspath Override location of bootstrap class files
[javac] -extdirs Override location of installed extensions
[javac] -d Specify where to place generated class files
[javac] -encoding Specify character encoding used by source files
[javac] -source Provide source compatibility with specified release
[javac] -target Generate class files for specific VM version
[javac] -help Print a synopsis of standard options
note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server 9.1 logs.
I have cheked jvm version on both system the only difference is :
Solaris points to jdk 1.5.0_09
Windows point to jdk1.5.0_05
Even i tried to run blank jsp also but again i got the same error.
Can any help me to sort out the problem or give me any idea so i can do something by my own.
Thanks in Advance
Gagan

Do you have ANT installed and available?
Thanks,
Kedar

SAP NW 7.4 as java system sync with solution manager system 7.1 issue

Dear all,
I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
Below are the activities completed:
1) Through template installed I have rgeisterd the system into Solman SLD.
2) Sync completed succfully exact product version is shwoing in solman SLD
3) after that I have checked in SMSY and LMDB its showing prefectly
4) But in SMSY its shwoing only under technical system,not showing product systems
5) I have assigned in product system in LMDB
Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
I ma getting belwo error.
No system found for this product/product instance
Message no. SOLAR_SPROJECT110
Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
Advance Thanks

Hi,
re-check if the 7.4 system is correctly registered in the solman SLD system.
Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
Please note - SLD -> LMDB -> SMSY.
So, if the first 2 don't have the correct information, you wont have much joy with smsy.
Rgds
Deepak

Steps for System Refresh for ABAP + JAVA stack

Hi friends,
I am newbie to SAP BASIS adminstration. There is a system refresh activity planned shortly.
Can someome pls let me know the steps for system refresh of ABAP + JAVA stack??
regards,
Ambarish.

Please check [systemcopy@SDN|System Copy and Migration] and [guides|http://service.sap.com/instguidesnw] according to your release.

Issue in Java system installation: MS SQL 2005

Dear All,
I am installing a SAP Netweaver '04 SR1 , Java system with data base MS SQL 2005.
I am facing the issue hereby i will attach the jload.java.log file.
Can any one help me out in fixing it?
java version "1.4.2_16"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_16-b05)
Java HotSpot(TM) Client VM (build 1.4.2_16-b05, mixed mode)
Mar 16, 2009 11:09:42 PM com.sap.inst.jload.Jload main
INFO: Jload -sec KS7,jdbc/pool/KS7,D:\usr\sap\KS7\SYS\global/security/data/SecStore.properties,D:\usr\sap\KS7\SYS\global/security/data/SecStore.key -dataDir D:/Netweaver/netweaver1\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\ONE_HOST/IMPORT.XML -log C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\ONE_HOST/jload.log
Mar 16, 2009 11:09:43 PM com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
java.sql.SQLException: [SAP NetWeaver][SQLServer JDBC Driver]Unable to connect. Invalid URL.
Thanks
Raj

Hi
Yes, everything is checked it. Error appears in the phase of Load Java Database content (18 of 25).
ERROR 2009-03-17 03:35:49
CJS-20065 Execution of JLoad tool 'C:\j2sdk1.4.2_16/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/KS7/JC00/j2ee\jdbc\base.jar;D:\usr\sap/KS7/JC00/j2ee\jdbc\util.jar;D:\usr\sap/KS7/JC00/j2ee\jdbc\sqlserver.jar;D:\usr\sap/KS7/JC00/j2ee\jdbc\spy.jar;D:/usr/sap/KS7/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/KS7/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/KS7/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/KS7/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/KS7/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'KS7,jdbc/pool/KS7,D:\usr\sap\KS7\SYS\global/security/data/SecStore.properties,D:\usr\sap\KS7\SYS\global/security/data/SecStore.key' '-dataDir' 'D:/Netweaver/netweaver1\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\ONE_HOST/IMPORT.XML' '-log' 'C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\ONE_HOST/jload.log' and 'C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_JAVA\ONE_HOST/jload.java.log' for more information.
Thanks
Raj

System Start up issue in my ABAP + JAVA system

HI,
when i try to start up my SAP (ABAP+JAVA) system, server processes fail to start. Below is the trace file.
Though it says missing file jvmx.jar, not sure if this is the reason for the start up issue.
Thanks to check and assist.
trc file: "D:\usr\sap\P1D\DVEBMGS00\work\dev_server1", trc level: 1, release: "700"
node name   : ID3944951
pid         : 7752
system name : P1D
system nr. : 00
started at : Wed May 05 13:27:07 2010
arguments   :
   arg[00] : D:\usr\sap\P1D\DVEBMGS00\exe\jlaunch.exe
   arg[01] : pf=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
   arg[02] : -DSAPINFO=P1D_00_server
   arg[03] : pf=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
   arg[04] : -DSAPSTART=1
   arg[05] : -DCONNECT_PORT=1243
   arg[06] : -DSAPSYSTEM=00
   arg[07] : -DSAPSYSTEMNAME=P1D
   arg[08] : -DSAPMYNAME=blrkec115278d_P1D_00
   arg[09] : -DSAPPROFILE=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
   arg[10] : -DFRFC_FALLBACK=ON
   arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 7756] Wed May 05 13:27:07 2010
[Thr 7756] *** WARNING => INFO: Unknown property [instance.box.number=P1DDVEBMGS00blrkec115278d] [jstartxx.c   841]
[Thr 7756] *** WARNING => INFO: Unknown property [instance.en.host=blrkec115278d] [jstartxx.c   841]
[Thr 7756] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
[Thr 7756] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties]
-> ms host    : blrkec115278d
-> ms port    : 3901
-> OS libs    : D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs
-> Admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : blrkec115278d
-> ms port    : 3901
-> os libs    : D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs
-> admin URL :
-> run mode   : NORMAL
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID3944900 :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID3944950 :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [03] bootstrap_ID3944951 :
-> D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID3944900            : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [01] ID3944950            : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
-> [02] ID3944951            : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\instance.properties
[Thr 7756] JLaunchRequestQueueInit: create named pipe for ipc [Thr 7756] JLaunchRequestQueueInit: create pipe listener thread [Thr 7776] WaitSyncSemThread: Thread 7776 started as semaphore monitor thread.
[Thr 7764] JLaunchRequestFunc: Thread 7764 started as listener thread for np messages.
[Thr 7756] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202) [Thr 7756] CPIC (version=700.2005.12.02)
[Thr 7756] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx1024m [jstartxx.c   2604]
[Thr 7756] [Node: server1] java home is set by profile parameter Java Home: C:\j2sdk1.4.2_21 [Thr 7756] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\P1D\DVEBMGS00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID3944951]
-> node name          : server1
-> node type          : server
-> node execute       : yes
-> jlaunch parameters :
-> java path          : C:\j2sdk1.4.2_21
-> java parameters    : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser -verbose:gc -Djco.jarm=1 -XX:PermSize=256m -XX:MaxPermSize=256m -XX:NewSize=160m -XX:MaxNewSize=160m -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:PrintGCTimeStamps -XX:UseTLAB -XX:SoftRefLRUPolicyMSPerMB=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:+UseParNewGC
-> java vm version    : 1.4.2_21-b03
-> java vm vendor     : Java HotSpot(TM) Server VM (Sun Microsystems Inc.)
-> java vm type       : server
-> java vm cpu        : x86
-> heap size          : 1024M
-> init heap size     : 1024M
-> root path          : D:\usr\sap\P1D\DVEBMGS00\j2ee\cluster\server1
-> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path       : D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs
-> main class         : com.sap.engine.boot.Start
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : D:\usr\sap\P1D\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\P1D\DVEBMGS00\exe\jvmx.jar
-> shutdown class     : com.sap.engine.boot.Start
-> parameters         :
-> debuggable         : no
-> debug mode         : no
-> debug port         : 50026
-> shutdown timeout   : 120000
[Thr 7756] JLaunchISetDebugMode: set debug mode [no] [Thr 7792] JLaunchIStartFunc: Thread 7792 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server1]
-> stack   : 262144 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 6]:
-> -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonP
-> roxy arg[ 7]:
-> -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.Por
-> tableRemoteObjectProxy arg[ 8]:
-> -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser
-> arg[ 9]: -verbose:gc
-> arg[ 10]: -Djco.jarm=1
-> arg[ 11]: -XX:PermSize=256m
-> arg[ 12]: -XX:MaxPermSize=256m
-> arg[ 13]: -XX:NewSize=160m
-> arg[ 14]: -XX:MaxNewSize=160m
-> arg[ 15]: -XX:SurvivorRatio=2
-> arg[ 16]: -XX:TargetSurvivorRatio=90
-> arg[ 17]: -XX:+PrintGCTimeStamps
-> arg[ 18]: -XX:+UseTLAB
-> arg[ 19]: -XX:SoftRefLRUPolicyMSPerMB=1 arg[ 20]:
-> -Dsun.io.useCanonCaches=false arg[ 21]: -Djava.awt.headless=true arg[
-> 22]: -XX:+UseParNewGC arg[ 23]:
-> -Dsys.global.dir=D:\usr\sap\P1D\SYS\global
-> arg[ 24]: -Dapplication.home=D:\usr\sap\P1D\DVEBMGS00\exe
-> arg[ 25]: -Djava.class.path=D:\usr\sap\P1D\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\P1D\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 26]:
-> -Djava.library.path=C:\j2sdk1.4.2_21\jre\bin\server;C:\j2sdk1.4.2_21\
-> jre\bin;C:\j2sdk1.4.2_21\bin;D:\usr\sap\P1D\DVEBMGS00\j2ee\os_libs;D:
-> \oracle\product\10.2.0\db_1\bin;C:\SYSROOT\system32;C:\SYSROOT;C:\SYS
-> ROOT\System32\Wbem;C:\Program
-> Files\CA\SharedComponents\ScanEngine;C:\Program
-> Files\CA\SharedComponents\CAUpdate\;C:\Program
-> Files\CA\SharedComponents\ThirdParty\;C:\Program
-> Files\CA\SharedComponents\SubscriptionLicense\;C:\Program
-> Files\CA\eTrustITM;C:\Program Files\Windows
-> Imaging\;D:\usr\sap\P1D\SYS\exe\uc\NTI386
-> arg[ 27]: -Dmemory.manager=1024M
-> arg[ 28]: -Xmx1024M
-> arg[ 29]: -Xms1024M
-> arg[ 30]: -DLoadBalanceRestricted=no
-> arg[ 31]: -Djstartup.mode=JCONTROL
-> arg[ 32]: -Djstartup.ownProcessId=7752 arg[ 33]:
-> -Djstartup.ownHardwareId=N1596875852
-> arg[ 34]: -Djstartup.whoami=server
-> arg[ 35]: -Djstartup.debuggable=no
-> arg[ 36]: -DSAPINFO=P1D_00_server
-> arg[ 37]: -DSAPSTART=1
-> arg[ 38]: -DCONNECT_PORT=1243
-> arg[ 39]: -DSAPSYSTEM=00
-> arg[ 40]: -DSAPSYSTEMNAME=P1D
-> arg[ 41]: -DSAPMYNAME=blrkec115278d_P1D_00 arg[ 42]:
-> -DSAPPROFILE=D:\usr\sap\P1D\SYS\profile\P1D_DVEBMGS00_blrkec115278d
-> arg[ 43]: -DFRFC_FALLBACK=ON
-> arg[ 44]: -DFRFC_FALLBACK_HOST=localhost arg[ 45]: -DSAPSTARTUP=1
-> arg[ 46]: -DSAPSYSTEM=00 arg[ 47]: -DSAPSYSTEMNAME=P1D arg[ 48]:
-> -DSAPMYNAME=blrkec115278d_P1D_00 arg[ 49]: -DSAPDBHOST=blrkec115278d
-> arg[ 50]: -Dj2ee.dbhost=blrkec115278d
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType loadInto [Thr 7792] JHVMLoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server1]
[Thr 7872] Wed May 05 13:27:08 2010
[Thr 7872] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 7872] Wed May 05 13:27:09 2010
[Thr 7872] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 7872] JLaunchISetClusterId: set cluster id 3944951 [Thr 7872] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)] [Thr 7872] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Wed May 05 13:27:13 2010
5.640: [ParNew 81920K->5980K(1007616K), 0.0258446 secs]
Wed May 05 13:27:17 2010
9.773: [ParNew 87893K->13835K(1007616K), 0.0529425 secs]
Wed May 05 13:27:21 2010
13.293: [ParNew 95755K->17179K(1007616K), 0.0572638 secs]
Wed May 05 13:27:23 2010
15.634: [ParNew 99099K->17958K(1007616K), 0.0419008 secs]
[Thr 6392] Wed May 05 13:27:26 2010
[Thr 6392] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver [Thr 6392] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 6392] Wed May 05 13:27:29 2010
[Thr 6392] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
[Thr 7804] Wed May 05 13:27:33 2010
[Thr 7804] JLaunchIExitJava: exit hook is called (rc = -11113) [Thr 7804] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 7804] JLaunchCloseProgram: good bye (exitcode = -11113)

Have you changed your java administrator password recently? If so, have you changed it in the configtool as well?
Kind regards,
Mark

System refresh of abap+java

Hi gurus,
I am trying to do the system refresh for ecc6.0 abap + java .I did the abap part with the oracle specific method where we restore the data files and run the control.sql command . But for the java part i am confused on what option i had tried to select abapJava and do an export and then when i am importing it with the abapJava option it is also doing the restoration of abap stack . If i select only java it is trying to create a instance JC00 which i dont want , Is there a method where i can only export the java stack and import into the abap system that was refreshed using the oracle restore method ?
Thanks in advance

try following this:
JAVA Refresh Procedure On SRC system
1) Execute the following command after navigating to the SAPinst directory to the JAVA export using SAPinst.
a. sapinst.exe product_cp.catalog
The export procedure is as follows
1) Specify the SID name and export directory
2) To take the export without stopping the JAVA process, uncheck the check box
On TRG System Preparations
1) Copy the export from the SRC export directory to the TRG system
2) The JAVA versions should be same on SRC and TRG
Import procedure is as follows
Execute the following command on the TRG system after navigating to the SAPinst in the Master DVD
sapinst.exe product_cp.catalog
Check for the TRG system SID for example TAJ
Note:
1) Ensure that the SAP system is up and running.
2) Ensure that temporary tablespace u201CPSAPTEMPu201D is not empty
After completing the import successfully, restart the SAP system.
Rohit

AS Java system issue log analyse order

Hi,
Just I would like to structurize the AS Java system log analysing steps for start up and sudden issues - purely for my documentation purpose. I know there are various logs for AS Java. I would request you to give those logs one by one in order of analyse till finding out the reason of issue occured.
like if this log is clear then go to this..if not here then go to the next ......
I hope my question is clear.We consider Database is up and no issues.
Please give your inputs and help out for the documentation.
Thanks a ton to all

Hi Daniel,
As per Sunny message, you have to check with the Log files Under directory Work ( DEV_* files ) and /usr/sap/SID/JC00/j2ee/JSPM/log
For more information about please read the link as,
http://help.sap.com/saphelp_nw70/helpdata/en/ac/e9d8a51c732e42bd0e7de54b9ff4e2/content.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/46/720d67a53259d9e10000000a1553f6/content.htm
It's very helpful for u
Regards
Thomas

HP2000 issues after doing system REFRESH and everytime it does UPDATES

Every time I have updates on my laptop HP 2000 bf69wm I have major issues. It happened again today I did the updates and then I cannot access anything on the internet. I get the spinning circle of death and no pages load. I did a system REFRESH which states it will not affect your personal stuff. Well great my pics are all intact however my Windows Office programs are GONE!!! I had to pay to put that on my computer and now they are gone!!! I got this laptop as a Christmas gift from my parents because my Toshiba is falling apart literally it is duct taped together. However the Toshiba still has less issues than this laptop does and it is brand new. So now do I honestly have to pay for Windows office again. It was a one time download so I cannot just download it again and I need it for my college classes. It is awesome to have a brand new laptop that only works when it feels like it and gives me more stress than it helps. Can someone please help me on what the deal is with this and also why I keep getting a message saying my usage is at 100%? I can be in my email and it tells me I am running at too much blah blah blah. So what is the purpose of the laptop if I cannot use it? If I had known it was this bad I would have returned it but too late now. PLEASE HELP!?!?!?!?!?

Hello xopixiegirlox,
Please call in and speak to a representative.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Please let me know if the rep was able to take care of your issues.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

System Refresh Only Java part

Hi Dear Gurus,
I have been given a task to do a system refresh for only java part for BI ( ABAP is already done).
please tell me what are all the precautions that to be taken while doing the java part.
we are running on windows and Mysql.
Please specify the steps that to be performed before doing the java part in the source system and target system.
Many thanks for your time guys.
Kind Regards,
Vamsi.
Edited by: vamsi koganti on Jan 23, 2008 1:11 PM

Hi Dear Rajesh
Many thanks for your reply and your time.
Few more questions
*deleting the contents of the global directory (pleasetell me where it is located)
where to give the CONTROL.SQL file?
and one more problem
I am getting the fallowing error when i start sapinst.exe
starting gui server process:
sapinstport: 21200
guiport    : 21212
guistart   : true
command    : "C:\j2sdk1.4.2_12/bin\javaw.exe" -cp "C:/WINDOWS/TEMP/sapinst_exe.8596.1201160177\jar\instgui.jar;C:/WINDOWS/TEMP/sapinst_exe.8596.1201160177\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
guiengine: call to bind() for socket 21200 1800 failed . No error
103 guiengine.connection.failed 21200, 943
Exit status of child: 1
I look in some previous post they ask the person to check the port is being used or not? how to check the port is being used or not? and how to assign this to that port **************
Please help me rajesh.
Once again many thanks for your time.
kind Regards,
vamsi.
Edited by: vamsi koganti on Jan 24, 2008 8:49 AM

Java Dispatcher Down but Server0 and SDM up after system refresh

Hello,
I have done system refresh from PRD to QAS of CRM system - dual stack.Once after the system refresh ABAP is up and running fine but Java is down (Only Dispatcher is down. Both SDM and Server0 are running fine).
I have followed Note 609603 - Problems with Multiple NICs and SAP J2EE Engine and have given the correct host name but the no luck..
std_dispatcher.out says the following error:
Cannot attach to the Message Server. Can't open port [3925] on host [<Source Host Name>/Source IP Address].
Could you please let me know if I need to do any changes in the Config tool?
Thanks,
Subbu

HI,
IN DB restore the hostname of java system stored in profiles would be your PRD.
Go to Configtool in Edit mode -- cluster --> change the hostnames in Instance profile -- and under other files like bootstrap etc whereever you find PRD hostname.
And otherwise for JAVA system you should use export/import option.
Regards,
Tajinder

Java system refresh issue- NW701

Similar Messages

Maybe you are looking for