Keyboard not visible in whatsapp after I upgraded to ios7. I have to type on the chat to get my keyboard visible. This is a bug :( poor testers..

Keyboard not visible in whatsapp after I upgraded to ios7. I have to type on the chat to get my keyboard visible. This is a bug poor testers..

Hello dhiliptcs,
It sounds like the WhatsApp app on your iPhone does not have a visible keyboard.  I recommend following the steps in the article below for an issue like this (you can skip step 3 since it is not related to this issue):
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • After upgrade to Mavericks I have to shutdown using the power button.  Any fix for this?

    I have a mid 2011 iMac, just upgraded to OSX Mavericks.  It will no longer shut down using the menu.  I have to push and hold the power button.  This sometimes results in a very loud "snap" from my machine.  Tried reinstalling but still does the same.  Any fix for this?  If not, how do I redownload Mountain Lion?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • After upgrading to iOS7 I have no controls for the voice memo

    Help

    Avoid this application because Apple clearly has NO interest in fixing this known bug. Instead spend the .99 and buy AudioMemos. WORKS BRILLIANTLY.
    http://imesart.com/products.php?pid=1

  • After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

    After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
    Any suggestions as how to fix this?
    I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

    Thunderbird > preferences (I think on a mac) and under attachments set the folder

  • Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7

    Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7.

    It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
    You can get it here:
    http://gimp-print.sourceforge.net/
    You can download the latest version from here:
    http://sourceforge.net/projects/gimp-print/
    Have you downloaded the recent Apple update to Epson drivers?
    http://support.apple.com/kb/DL1398

  • Hi support team, I'm using iphone4, After i upgraded my ios7 i'm facing issues.Need ur help

    Hi support team, I'm using iphone4, After i upgraded my ios7.0.2 i'm facing issues.
    - Unable to view the incoming calls.
    - mobile hanging

    This is not the "support team".  These are user to user forums.  You are not addresssing Apple's "support team" by posting here.
    Which of the troubhleshooting steps listed in the iOS 7 user guide have you tried?  Have you tried a reset?

  • I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define

    I have iPhone 4. After I upgraded to ios5 I have a problem with Wi-Fi connection with "WPA enterprize" protection. I can define the connection and everything works fine. But after I lose signal or shutoff the WiFi, I cannot re-connect, and need re-define the net. It is only in WPA enterprize.
    Thanks,
    Eyal

    I tried this! Somebody suggested it in another thread. It did not work, sadly.

  • I lost my smiley face icons etc in my text messaging after I upgraded to ios7 on my iPhone 5

    I lost my smiley face icons etc in my text messaging after I upgraded to ios7 on my iPhone 5

    Add the Emoji keyboard back
    Settings > General > Keyboard > Add > Emoji

  • After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    I hope it doesn't effect how I down load my itunes to my ipod and iphone.
    No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.)

  • Why is my iPhone 4 slow after I upgraded to ios7?

    Hello Apple team,
    please can you advise why is my iPhone 4 slow after I upgraded to ios7?
    Is there a way to roll back to ios 6?
    Regards

    http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/

  • I would like to upgrade my itunes but have a macbook 10.8.5. How can I do this?

    I would like to upgrade my itunes but have a macbook 10.8.5. How can I do this?

    Do you have 10.8.5 or 10.5.8?  It's listed as the latter on your equipment setting, but you stated that you have 10.8.5?  If you have 10.8.5 you have the most recent version and you should be able to update iTunes by checking for updates.  However, if you have 10.5.8 you need to first update to 10.6 so that you can download the new version of iTunes.  To upgrade to 10.6 (Snow Leopard) you need to get a hold of Apple so that they can send you the install DVD which will allow you to update your computer, after that, you can then download updates and get access to the App Store right from your desktop where you can then download Lion or Mountain Lion should you choose to move on further.

  • HT204291 Since upgrading to iOS7, i have experienced issues with Airplay button missing

    Since upgrading to iOS7, i have experienced issues with Airplay button missing from the control menu as well as in Spotify.  It is as if airplay is not runing.  A temp fix: Reboot of the ipad mini (Home button+standby) Is there anything permanent?
    I have verified that my iPad mini and apple TV is up to date.
    Airplay enabled, the network is connected with internet.
    It is as if, airplay is a service that just stopped working and has to be restarted again via a reboot.

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    The following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Troubleshooting Security Software

  • HT201365 When I upgraded to ios7 I have no app for find my iPhone ?

    When I upgraded to ios7, I have no app for find my iPhone

    Had you downloaded the Find My iPhone app from the App Store previously?
    You do not need the Find My iPhone app on your iPhone for you to be able to locate your iPhone if it is lost or stolen.  The Find My iPhone app, should you choose to get it, would enable you to find some other Apple device that had been properly set up from your iPhone.

  • Help help please...Photoshop CS, on a Windows XP machine.   After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To continue using this p

    Help help please... I'm running Photoshop CS, on a Windows XP machine.   After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To continue using this product I must re-activate it".  BUT the activation link informs me that they no longer support the product (neither online nor telephonically).  So how can I re-activate this software?

    Hello Helios & Eb29075,
    +1. Please check log file for error message.+
    +2. Check status of EM.+
    +3. Please see:+
    +How To Drop, Create And Recreate DB Control In A 10g Database [ID 278100.1]+
    +Problem - emctl start dbconsole Fails with Error OC4J Configuration issue OC4J_DBConsole__ not found [ID 555218.1]).+
    As you said above, yes, I did find OC4J config issue & EM Config issue and resolved them. But still I couldn't get my DBConsole started.
    Yes, I was able to drop DBConsole<sid> service using 'emca' repository drop. But, when I started recreating repository for DBConsole service, I wasn't able to do it. I tried several times but in vain.
    Thanks,
    A.P.

  • Pages wont load half the time have to close all the way and reopen always says conecting this really started to happen after the last 2 updates

    pages wont load half the time have to close all the way and reopen always says connecting this really started to happen after the last 2 updates

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

Maybe you are looking for