Loader.loaderURL returns "wrong" location. [[DYNAMIC]]/9

Hey everyone,
I have an issue where I am watching the value of: loaderInfo.url and sometimes it returns the url of my file just fine, example "path/myfile.swf and it is all good. Other times it will return path/myotherfile//[[DYNAMIC]]/9
I found the following URL that helps explain it a bit http://swfshield.com/info/problems however how do I make a swf un-protected so it will return my url correctly?
Thanks a bunch guys.

not that I know of, some that get loaded in are fine, and some return the /[[DYNAMIC]], not really sue why, other then it being "protected".

Similar Messages

Jump to wrong location

I have a project with about 85 slides that was built with Captivate 4. Many of the slides have buttons that jump to other slides for branching within the presentation. On one of the buttons it is jumping to the wrong slide when I deploy it to our LMS (Moodle). In the web broser preview it works fine, and the properties of the button show it jumping to the correct slide, but when I deploy it within Moodle, it jumps to the wrong location. I have reloaded it and rebuilt it several times, but it is still doing the same thing. Any ideas?
Thanks,
Whitney

Originally posted by: m.exp1206.artemis.in-ulm.de
After some investigation of the other policies and commands I found these
translate calls inside the method getContrainsFor. I tried to understand
their work and copied some lines to my code. After some modifications i
finally reduced it to one call of translateToRelative.
protected Command getMoveBendpointCommand(BendpointRequest request) {
Point p = request.getLocation();
getConnection().translateToRelative(p);
return new MyMoveBendpointCommand(
(SimpleConnection)request.getSource().getModel(),
request.getIndex(), p);
After reading the chapter about coordinate systems in the Draw2D guide
twice i understand the problem. SWT and Draw2D use different coordinate
systems and the translate calls delivers the correct coordinates.
[email protected] wrote:
> [-- text/plain, encoding 7bit, charset: US-ASCII, 3 lines --]
>
> Check WireBendpointEditPolicy#getCreateBendpointCommand in
> org.eclipse.gef.examples.logicdesigner.edit
> I hope this will help
Not really. I thought if i use absolute bendpoints the translation is not
necessary.
Anyway, thank you.
CU Martin Keller

Report returns wrong data when run on server

Hi,
I'm runing CRS XI R2 on Windows Server 2003 SP2. When I refresh a report in the Crystal Reports XI Designer, I'm getting correct data. But when I schedule the report to run on the server it returns wrong data. The data is different from what I see when I refresh it from the designer. In the report I have running totals set up to count customers that meet a certain criteria. The report is very large. It take almost 2 hours to refresh.
I was wondering what is causing the difference in running total data between refreshing it on the designer and running it on the server. Is it returning wrong data b/c of it not reading all the records? Should I be making any changes to the server settings? I saw that under pageserver, there are options for setting the 'Minutes Before an Idle Report Job is Closed' and 'Database Records To Read When Previewing Or Refreshing a Report". Do either of those have anything to do with the report returning incorrect data when being scheduled to run on the server?
Thanks,
Kim

Hi Xuandao,
You would need to Use Cell Binding and Trigger concept to accomplish this.
Its simple, however, you would have to work on a trial and error basis to understand this concept as implementing the same is subject to your dashboard and WEBI Design.
Open you LiveOffice.
Insert your WEBI, Now, go to Object Properties of your WEBI, select the second tab that says Prompt, Here, it lists the prompts that you have for your WEBI. This would also enlist your BEx variables as well. Select this BEx variable and click on the button that says Prompt at the bottom of this window. Here, select choose Excel Data Range and click on the cell select button on the right (small button that lets you choose what cell you want to bind this prompt to), Now select a free cell that would not be even populated later on when you run the dashboard say A1 (remember the value that you select). Click on OK and again OK. The WEBI Refreshes and you can see all the prompt values at the cell A1. These are all the possible values stored for your BEx prompt variables (these values are fetched from BW system dynamically).
Now, save this LiveOffice, Go to you dashboard. Connect your dashboard to your Live office. Go to Data-> connections-> Now, select the WEBI and in the right hand pane go to Usage tab, here, Click on Trigger cell button on the right hand side and select A1 in you LiveOffice.
It should work fine.
Let me know.
Rgds,
Sreekul Nair

Folders on the IMAP server do not appear or appear in wrong location - those cannot be modified in Thunderbird because "they do not exist on server".

Hi all,
A few days ago, I moved 3 sub-folders within my Archive folder. I was doing those modifications using Thunderbird.
My Archive folder used to contain the following sub-folders:
Archive
/A2014
/B2014
/C2014
I tried to move the folders A2014, B2014 and C2014 under the sub-folder LastYear, and created new A, B and C folders for 2015, so that it would be something like:
Archive
/LastYear
/A2014
/B2014
/C2014
/A2015
/B2015
/C2015
On the webmail interface, everything looks fine: the old A, B and C folders where moved into the Archives/LastYear folder, and the new A, B and C folders appear under Archives. However, on Thunderbird things are a bit more... strange.
Case 1: For some folders, things are as they should be.
Folders A2014 and B2014 were correctly moved into Archives/LastYear.
Folders A2015 and C2015 were correctly created in Archives.
Case 2: One folder does not appear at all - anymore.
Folder B2015 does not appear anywhere - despite being visible on the webmail interface. It does not appear in the list of folders to synchronize. No .msf file appear. Nothing happens if I try creating it again.
Note that it briefly existed after I created it, but stopped appearing a few hours later.
Case 3: One folder appears in the wrong location and cannot be accessed.
Folder C2014 appears in the old location (Archives) and not were it should be (and is on the webmail interface), that is Archives/LastYear. I cannot perform any operation on it in Thunderbird, I systematically get the following error message:
"The current operation on 'C2014' did not succeed. The mail server for account <AccountName> responded: "Archives/C2014" doesn't exist."
(Which is correct because according to the server the folder C2014 is in Archives/LastYear).
The C2014.msf file is also wrongly located, but moving it to the correct location did not change anything: the next time Thunderbird was started, the wrongly located .msf file was re-created.
Thunderbird does not show the emails contained in this folder - when I try loading them I get the previous error message.
Using the same style than before, here is how my Archives folder look right now:
Archive
/LastYear
/A2014
/B2014
/A2015
/C2015
/C2014
I am totally flabbergasted, I have no idea of where the problem is. I tried various fixes found on forums (such as playing around with the .msf files), but no luck so far. Any idea?
A few more details:
- I use an IMAP server.
- This is a professional address, and I have little control on it.
- I use Thunderbird with this account on two different computer, the problem is identical on both computers.
- I tried removing/re-installing the account from Thunderbird, it did not change anything.
I would be eternally grateful if any of you could come up with a solution!
Many many thanks,
Agnes

I know my files downloaded through Firefox won't appear in my downloads folder because that is just supported by Safari
No, I think that Apple just assigned the Downloads folder to Safari to send things there by default. You can do the same with Firefox, just go to the Firefox Preferences, click on main, tick the "Save files to..." and click the Choose button, then navigate to /Users/yourname/Downloads and click choose. I have always had all my Internet applications download things to a Downloads folder I keep at the root level of the drive (so all users can access them), but I just changed the Firefox pref to the new Apple Downloads folder and it worked fine.
Francine
Francine
Schwieder

Dispatcher not starting "Loading: ThreadManager returned false! "

Hi,
The system was running fine for about two weeks and now the dispatcher will not start, we have upgraded the java server from windows 2003 to windows 7 and i did a system copy using the sapinst tool. This is a java only server using ABAP ume to connect.
Hers is the errors i am receiving:
SAP J2EE Engine Version 7.01   PatchLevel 75592. is starting...
Loading: LogManager ... 606 ms.
Loading: PoolManager ... 3 ms.
Loading: ThreadManager ...
Loading: ThreadManager returned false!
Kernel not loaded. System halted.
I also get this error:
[Thr 6088] * LOCATION    SAP-Gateway on host Current server / sapgw00
[Thr 6088] * ERROR       hostname 'Old server' unknown
[Thr 6088] *
TIME        Mon Apr 18 13:12:15 2011
[Thr 6088] * RELEASE     701
[Thr 6088] * COMPONENT   NI (network interface)
[Thr 6088] * VERSION     38
[Thr 6088] * RC          -2
[Thr 6088] * MODULE      nixxhsl.cpp
[Thr 6088] * LINE        230
[Thr 6088] * DETAIL      NiHsLGetNodeAddr: hostname cached as unknown
[Thr 6088] * COUNTER     8730
[Thr 6088] *
[Thr 6088] *****************************************************************************
Any help that would be great.
Thanks
JS

Dear Jean,
Hope you are doing good.
Not much investigation can be done with:
Loading: ThreadManager returned false!
Kernel not loaded. System halted.
Just retrigger a server restart and then check the below logs. You will definitely find more information on the error:
/usr/sap/<SID>/work/ dev, std and jvm*
and
/usr/sap/<SID>/JC<nr>/j2ee/cluster/server0/logs/default trace (latest).
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

Why does the cell style index returning wrong CellFormat value when parsing excel cells using OpenXml SDK?

Consider a General format cell having a value of 39.95. When I fetch the CellFormat of the cell it returns wrong cell format-
CellFormat thisCellFormat = ((CellFormat)cellFmts.ChildElements[(int)thisCell.StyleIndex.Value]);
int fmtId = Convert.ToInt32(thisCellFormat.FormatId.Value);
The value of fmtId returned is 1, and in some cases 38, where it should be 2 or 39.
This issue is only for General format cells, I am getting correct id for Number format cells.
Below is the
Standard ECMA-376 Office Open XML File Formats specified set of implied cell formats for reference-
ID Format Code
0 General
1 0
2 0.00
3 #,##0
4 #,##0.00
9 0%
10 0.00%
11 0.00E+00
12 # ?/?
13 # ??/??
14 mm-dd-yy
15 d-mmm-yy
16 d-mmm
17 mmm-yy
18 h:mm AM/PM
19 h:mm:ss AM/PM
20 h:mm
21 h:mm:ss
22 m/d/yy h:mm
37 #,##0 ;(#,##0)
38 #,##0 ;Red
39 #,##0.00;(#,##0.00)
40 #,##0.00;Red
45 mm:ss
46 [h]:mm:ss
47 mmss.0
48 ##0.0E+0
49 @

The purpose of this forum is to support the Open Specifications documentation. You can read about the Microsoft Open Specifications program here,
http://www.microsoft.com/openspecifications/en/us/default.aspx
The library of Open Specification documents is located here,
http://msdn.microsoft.com/en-us/library/dd208104.aspx
It doesn’t appear that you are implementing one of the protocols cited. Your question may be more applicable to MSDN's Microsoft Office for Developers/Open XML Format SDK forum at
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=oxmlsdk
Bryan S. Burgin Senior Escalation Engineer Microsoft Protocol Open Specifications Team

When i login to pc or some another iphone to find my iphone Web it show me wrong location

When i login to pc or some another iphone to find my iphone Web it show me wrong location.
and whn i check my location to map tht show me correct.......
Today i wast my 1Hr to search my friend va find my iphone it show me wrong loction 4km wrong location...
ThankQ

Try signing out, then back in on your phone: Settings>Store>Apple ID, tap the ID shown, sign out, sign back in. If that doesn't work, reset your password here: https://iforgot.apple.com.

Robo Help Server 8 Publishing files to wrong location

Hi
I have recently installed a trail verstion of Robo Help 8 server. All appears to be ok with the install I can access the website and log into the admin portal etc... The only diffrence from the default install is that I have configured tomcat to use port 80 rather than 8080.
However I am having a problem whenever i try to publish a help file from Robo Help 8, I input all of the details of the server <Server IP>/robohelp/server
put in the default admin username and password and select the general area to publish the help file to. All of the files appear to publish ok from Robo Help 8 and no errors are receved.
When I log onto the admin portal of the website the there is nothing displayed in the projects window. I have check the local disk of there server were robo help is installed and i think the problem may be that the server is putting the files in the wrong location.
I can see that a folder has been created in the following location
C:\Program Files\Adobe\Adobe RoboHelp Server 8\robo\server\general\projects\TestProject
with the following folders within it
resource
webhelp_skin_files
whdata
whxdata
However none of these folders contain any data.
All of the files apper to be uploading to C:\ not the above directory wich is what i would expect.
If a copy the files that have been uploaded to C:\ to C:\Program Files\Adobe\Adobe RoboHelp Server 8\robo\server\general\projects\TestProject and restart the tomcat service the project then shows in the project window. However when i click view project all i get is a blank screen. I have searched the forum but cannot find anyone having a similar issue.
Any help would be gratley appriciated.
Below is the config of the Server
Windows 2003 Server IIS not installed
Java 6.21
Tomcat 6.0.29
Robo Help Server 8

aha!
If the firewall is on, turn it off.
JC

Maps directs me to wrong location

Hi All -- My Google maps (the one that came with the phone) constantly sends me to the wrong location. I'll type in a known address (let's say 5410 Wilshire Blvd, 90036) and it will give me directions just to Wilshire Blvd (no street address). It does this almost every time, both in Maps view and List view.
I've tried typing the address in, or linking to it from my calendar meeting location, and still doesn't work.
I have the google app, so I can go there, go to Maps and enter it in there and it works fine, but that seems like a lot of extra work. Anyone find a fix?
Also, I'm finding it near impossible to view traffic on the map if you have a route marked.

I have the google app, so I can go there, go to Maps and enter it in there and it works fine, but that seems like a lot of extra work. Anyone find a fix?
I just tried this ("5410 Wilshire Blvd, 90036") and a red pin drops down to a precise street address (looks to be over Vince). Where does your red pin fall?
Also, I'm finding it near impossible to view traffic on the map if you have a route marked.
This is a problem I experience as well. Unfortunately the best solution I have found is that once the purple route line has been drawn after tapping Route, to just toggle over to Search and the purple will go away. This way you can see traffic conditions as you have a general idea of where the purple is.
-SM

Custom top pointing to wrong location

hi,
our custom top pointing to wrong location.
we checked the CUSTOM ENV it is fine.
We changed the custom top location(to correct value) in context file and ran autoconfig. after running the autoconfig then the value is changed and pointing to old location only(wrong location).
we checked the default.env and topfile.txt everything is fine.
Please advice where to check to fix this issue.
or suggest me a a action plan.
Thanks in avance.
Regards,
DBA

Hi;
Please check below notes and link and compare steps wiht yours
CUSTOM_TOP yaratma
Re: Creating a Custom Application in Applications 11i
http://appsdba.info/docs/oracle_apps/sysadmin/R12/CREATECUSTOMTOPINR12.pdf
Regard
Helios

Portal Navigates to Wrong Location from One DI????

Hello Al,
We've had intermittent problems with one of our DI's in our QA or PROD environments navigating to a wrong location in from 1st/2nd level navigation.
- It typically only happens with one portal tab, not many or all.
- We know the problem isn't with our content as it chooses to navigate to locations sometimes in our own content but many times in an admin area, but totally unrelated to where it should go.
- Once the error occurs the bad navigation remains the same until we've cycle java.
- We've tried clearing PCD cache on the bad DI but that hasn't helped.
This may be happening only after we release content but we're not sure of that at this point. Our release process has us shutting down the DI's, importing new content to the CI, then bringing DI's up one at a time for testing. If the area affected by the problem isn't part of our release content the problem may not be discovered until later regression testing. Has anyone seen anything similar?
Thanks,
Doug
Message was edited by:
Doug Steckel

Everything is easy -- once you know how
LN

Statvfs returns wrong values

Hi,
I am developing a program the will check for disk space (used,blocks, available ...) and i am using the statvfs.h file.
When tested with small capacity disks (~5G) it works fine (compared to df -k).
When tested with large capacity disks (~400G) it returns wrong values(compared to df -k).
I am using f_bavail and i am casting from fsblkcnt_t to integer/long.
Please help.
Thanx R.

Thanks for your answer.
I have discovered that it (statvfs.h) doe's not work with vxfs, only with ufs.
I am using Veritas Cluster Server.
Any chance of an answer ??
thanks,
R.

JSObject returns wrong date. How can I extract correct date from digital signature?

I'm trying to extract name and date from digital signatures by using JSObject in Excel VBA, but JSObject returns wrong date. Year, month, hour and minute are correct, but only day is incorrect.
Here is my code. I'm using Acrobat 8.1.3.
Please tell me what's wrong with this code and how I can extract correct date from digital signatures.
Public Sub sbTest()
Dim oApp As Acrobat.acroApp
Dim oPDDoc As Acrobat.AcroPDDoc
Dim jso As Object
Dim f As Object
Dim sig As Object
Dim strFileName As String
Set oApp = CreateObject("AcroExch.App")
Set oPDDoc = CreateObject("AcroExch.PDDoc")
strFileName = "C:\Test.pdf"
If (oPDDoc.Open(strFileName)) Then
Set jso = oPDDoc.GetJSObject
Set f = jso.getField("Signature1.0")
Set sig = f.signatureInfo()
Debug.Print sig.Name
Debug.Print sig.Date
End If
Call oPDDoc.Close
Call oApp.Exit
End Sub

Hi
You can use TDMS file format to save the data. I have attached a reference Vi.
On button click you can log the data or remove the case structure and continuous log the complete acquisition data.
Thanks and Regards
Himanshu Goyal
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!
Attachments:
Data Save in File.vi ‏35 KB

Sent long message 4s now message program will not open. Tries to load but returns to the home screen after a while

Sent long message 4s now message program will not open. Tries to load but returns to the home screen after a while. How can I open my messages?

close all backgrounded apps, and then try,if it crashes again then do a reset all settings

IPhoto 11 has assigned a wrong location on 10% of my photo library

Is there a way to correct these wrong locations other than photo by photo since about 1400 photos are affected by this bug ?

Look at the scroll bar at the bottom and move it to the left to get the thumbnail size you want.
OT

Loader.loaderURL returns "wrong" location. [[DYNAMIC]]/9

Similar Messages

Maybe you are looking for