Logon image needs to change automatically for corresponding month

Hi All,
   We have a requirement where in,the logon image needs to change according to the month.If Jan then 'mage A'if Feb then 'mage B' simillarly for dec.We have 12 images.How can i acheive this?Kindly help in this regards.
Thanks in Advance,
Naga

ok, then you have to change login module, try using scheduler servlet, which will create time interval. Also you have to copy all images in one folder location in server, but check with image name because it might affect.
Edited by: Yogesh Galphade on Feb 23, 2011 7:41 PM

Similar Messages

  • I have 2 point security for AppleID. My iPhone 4S is listed as my trusted phone to text. No tel. no. is given. I am updating to iPhone 6Plus with same tel. no. Do I need to change anything for the sign in verification?

    I have 2 point security for AppleID. My iPhone 4S is listed as my trusted phone to text. No tel. no. is given. I am updating to iPhone 6Plus with same tel. no. Do I need to change anything for the sign in verification?

    Of course You can also add your iPhone telephone # as a trusted device.
    This way when you insert your SIM card into any phone, Apple will automatically recognize your cell phone # as a
    trusted device (may be handy if iphone breaks but you insert SIM card into another phone).
    HOWEVER:
    Having also your iPhone as a trusted device, is convenient if you travel and use a different SIM card
    at destination. This way you can still use the iphone for verification, even though you are using a different
    phone #.
    Regards

  • In Sales doc.,Shiping Point need to change automatically by changing itemca

    Hi,
       I need a quick help from  you all...
    In a sales order,For a specific line item...while changing the Item category the respecitive shiping point has to change automatically.
    Could you please suggest any approach of solving through standard....
    In rare case,If we cannot able to do it standards (config) May I know the approch thorugh ABAP programme.
    Thnaks & Regards,
    Pugal

    Hi there,
    By standard SAp this is not possible coz Shipping point ddetermination is Shipping conditions /Loading grp / Plant.
    When you change the item catg, none of the above parameters change. So shipping point willnot change.
    But from customizing point of view, you can define a enw Z table, maintain the fields like item catg, shipping point etc.
    In the table yu can enter the item catg - shipping point combination. In the prog MV45AFZZ, you can write a ABAP code sothat when the user changes the item catg in VA02, system should call the Z table & change the shipping point accordingly.
    Pls note that this will only change the shipping point when the item catg is changed. Shiiping point that is proposed during sales order initial entry will always be standard determination.
    If you also by-pass standard shipping point determination, then you need to write the ABAP code in MV45AFZZ to always refer the shipping point from Z table whatever may be the item catg.
    But why do you want to relate all standard parameters with item catg?
    Regards,
    Sivanand

  • Disk Utility: Restore Failure-Source image needs to be scanned for restore.

    Hello guys,
    I have a .dmg (source image) that I have created from a DVD by myself (read-only format).
    I am trying to restore it to a destination and a Restore Failure notification pops-up as follow:
    "Restore Failure
    Could not find any scan information. The source image needs to be imagescanned/scanned for restore"
    I am quite new to Mac. Half of the time, I don't really know what I am doing - but just relying on the 'Help Menu', some research for guides on the internet and most of all read-on most of the posting here in the Apple Forum for what I want to do or might have encountered. Lastly to hopefully also speak the Mac language. For example - What's a disk image? What a .dmg? What's a source image? and etc. ~Lost~
    So for this case, I am totally lost as I can't seems to understand what does the Restore Failure notification mean at all as I quote above. What does it mean by the Source image needs to be imagescanned/scanned for restore? What do I do from there? How do I scanned my source image? Is there a steps that I miss out while creating .dmg from the DVD?
    Could not find any scan information? What scan information? Where do I go to asked for scan information?
    I am so lost that I don't even know the right question to ask or begin with.
    I know what I want to do and believe it can be done with Mac. But I just doesn't seems to understand the concept of how it really works yet but to just follow blindly throughout the guides.
    So please help me if possible.
    Thank you in advance.
    Best Regards,
    Jon Gan

    Hi,
    If you open Disk Utility, select the Image in the disk util sidebar, and click on Images > Scan for restore... in the menu bar, it will take care of it for you. After that you can perform a restore as you were trying to do.
    They do this so that disk util can verify your data after the restore to make sure it copied exactly.

  • Need skype no. only for 1 month

    hi,
    is that possible to have skype no only for 1 month?

    Hi Dave828,
    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

  • Why am I being told my email address has changed and need to change it for my apple id to work?

    Not just iTunes store, but every day or so, when I'm trying to check for updated apps in iTunes, or download something on iPhone or update OS X software via App Store, I'm told that my email address has changed and I need to update it before I can download tunes from iTunes.
    I then get redirected to a page where my apple id is shown (my email address), the address field is blank and a couple of password fields with ****** in them.
    I put my email address (apple id) back in and all is well.
    Why is it being reset all the time?
    I don't have another apple id with the same address, but I do have a lot of devices using my one apple id:
    A Mac (Lion latest)
    iPhone 4S (iOS5 latest)
    iPad 1 (iOS5 latest)
    iTunes on XP (latest iTunes)
    iPhone 3G (iPhone OS 3 - yea, really ancient)
    Apple TV 1 (latest)
    Wondering if one of these could be causing a reset.

    this can happen when the billing address in your appleid info is not EXACTLY the same as your bank details, depending of the bank (see if you right "st" instead "street" maybe)
    check out this article:
    support.apple.com/kb/TS1646

  • Swapping images - need to change size

    I am trying to create a disjointed rollover so that when I
    click on a picture thumbnail in one frame, the full-size image
    changes on another frame (it is for a photo website - there are
    about 20 thunbnails on a page and a space for only one full-size
    image).
    It works perfectly fine with "Swap Images" behavior as long
    as all full-size images are of the same size - you just set one of
    the full-size images as an original as then swap images as you
    click on different thumbnails. The problem I am struggling with is
    that my full-size images are of different size - "Swap Images"
    functions distorts them since it resizes all full-time images to
    the same size. What is a solution?

    You can do this many ways ways -
    1. Don't use swap image - use Show/Hide layer instead. Have
    the alternate
    image in a hidden layer that is shown when the trigger is
    'tickled'. Using
    this method you can have images that are any dimension.
    2. Use swap image, but remove the dimensions from the
    original image's tag,
    i.e., change this -
    <img name="original" width="150" height="220" ...
    to this -
    <img name="original" ...
    Now when you swap in your offsize image, there is no
    predefined size to
    change it to. Be aware that this method may well result in an
    unpleasant
    and undesirable 'rearrangement' of your page layout as it
    adjusts to your
    new image's dimensions.
    3. Pad the smaller image with canvas background color on all
    sides so that
    all the images *are the same size*.
    4. Use a SetTextofLayer (SetText of Element in CS3) behavior
    to change the
    image reference in a layer (or non-positioned container)
    placed so that it
    will show the desired larger image in the proper place.
    5. Use the PVII ShowPic extension -
    http://www.projectseven.com/
    Take your pick....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "ADoubov" <[email protected]> wrote in
    message
    news:[email protected]...
    >I am trying to create a disjointed rollover so that when
    I click on a
    >picture
    > thumbnail in one frame, the full-size image changes on
    another frame (it
    > is for
    > a photo website - there are about 20 thunbnails on a
    page and a space for
    > only
    > one full-size image).
    >
    > It works perfectly fine with "Swap Images" behavior as
    long as all
    > full-size
    > images are of the same size - you just set one of the
    full-size images as
    > an
    > original as then swap images as you click on different
    thumbnails. The
    > problem
    > I am struggling with is that my full-size images are of
    different size -
    > "Swap
    > Images" functions distorts them since it resizes all
    full-time images to
    > the
    > same size. What is a solution?
    >

  • Need to change header for multipleSelection

    I have a HGrid with tableSelection which has multipleSelection option. This by default shows the Select All, Select None, Expand All, Collapse All.
    Is it possible to change the header to not show the Select All & Select None, because by default all the rows will be selected and the users are not allowed to change the selection.

    Hi there
    You probably need to edit the Window properties.
    Click View > Pods > Project Set-up.
    Expand the Windows pseudo folder.
    Double-click the Window name.
    Clear the Home check box.
    Re-compile the CHM and you should be set!
    If for some reason this doesn't seem to work, you may need to define a new window, configure it as desired, then configure the compilation to use the new window.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Urgent need to change email for reset security question

    Need ur help change the email due to make verification for ID apple
    The email which I put it before for reset the security question I forgot the password
    If u can use my ID Apple *****@hotmail.com instead of the last one before
    Your support in this problem is really appreciated .
    azoz
    <Email Edited by Host>

    If you can't get the password reset, you need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (114408)

  • Login on iMac changed(incl. this group logon), how do I change it for  icloud?

    I log on @ work, PC environment, with my old p/w.

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

  • Photosmart 2710 need to change region for printer cartridges

    Hi:
    I am an international resident currently residing in Brazil. My printer is programmed for Asian print cartridges and the region needs to be changed so I can purchase cartridges locally.
    When I changed from Europe to Asia, HP support in Singapore was very helpful and English speaking. Support in Brazil only speaks Portuguese and I need the instructions in English.
    Who can I contact for this, as I am out of warranty and the HP Website is a maze of unhelpfulness, if you are out of warranty.
    This question was solved.
    View Solution.

    You will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work.  HP's web page on the subject is here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Need to change "Name" for caller ID

    I share my account with my girlfriend. When I make a call, her name shows up on the other persons Caller ID.
    How do I change this?
    Someone else reported that the solution was to Log into your on-line MyVerizon account as Account Owner.  In the 'I Want To" box on the left-hand side, type 'share name ID' and the box should populate with several choices in blue below the box, including Share Name ID.  Click on the blue Share Name ID; at the top of the page, choose the line you want to change and then make the necessary changes; click Submit at the bottom.
    THIS DIDN'T WORK.
    "share name ID" is NOT an option.
    Anyone have a better suggestion?

    You also may want to click on Change Features under Manage My Account and ensure that Caller ID and Share Name ID are both enabled on the line.

  • Need to change datasource for the existing Planning application.

    Can I change the datasource to point to different relational database and recreate the same application. Please help me..I am on 11.1.1.3.
    Thanks,
    Vince

    Hi,
    Pointing to an existing application to a new database means you are going to lose your forms, security, task lists etc. Instead, I suggest 2 options:
    1. first make a duplicate of your app, use LCM to export everything, deploy duplicated app and import exported LCM profile back into this app. It's very straight forward.
    2. Simply migrate & deploy the existing application to a new one. (right click on app in app library, select migrate). Although this is even simpler, this only applies to epma apps.
    Cheers,
    Alp

  • CC Team. Need to change permissions for users

    I have installed CC Team on several computers, 15 so far or so.
    I made install package to do this.
    I used the default settings which among other things don't allow the users to update the applications. The Admin can only do it.
    Now I am facing the problem that users who are using CC on their private computers cannot update some programs because the Admin has to do this.
    Is there some simple way to change the permissions so they can update?

    Hi Sigurdur Armannsson,
    Please follow this Link to enable the updates feature in the applications.
    http://helpx.adobe.com/creative-suite/kb/disable-auto-updates-application-manager.html
    regards,
    Abhijit

  • I need to change my payment to monthly rather than annually is there a way i can do this?

    Any answers?

    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Maybe you are looking for