Mail. How can I copy the sender and date info from the Header like I used to do in Lion?
I used to find it very useful to drag and highlight all the info in the header of the email including sender, cc, date, subject etc to be able to paste in into other docs as reminders of who sent what when. Now I have to do 2 copy/pastes. Not a deal killer but makes my life just that little bit more unnecessarily complicated.
There is usually a toolbar button in the editor to turn a text link into a clickable hyperlink (look for a chain like button).<br />
You can select the text and click that button to turn the link into a clickable hyperlink.<br />
If you can't find the button then hover them all to check the tooltip of each.<br />
* Make Link - https://addons.mozilla.org/firefox/addon/142
Similar Messages
-
My BB 8900 constantly is trying to send and receive info from the network
The connectivity arrows are on almost constantly - thereby draining the battery within a 8hr period.
I have checked to make sure there is no programs that are running. I even had rogers replace it, only to have it happen again.
Does anybody know why this would be happening?
thanks!Hi and Welcome to the Forums!
You have some app running that is constantly using your network connection to do something. It could be your browser -- if it's left on an active web page that auto-refreshes, that will do what you describe. It could be a news app -- if you leave it running in background and it has a short interval for refreshing it's news articles, that would result in what you describe. It is doubtful that this is an email issue -- if you have BIS email conduits, traffic to your BB is only generated when there is a change at your email server that needs to be pushed to the BB...there is no check for new email directly between your BB and your email server...BIS functions as that bridge.
Hold down your BBKey and look at the ribbon of apps...one (or more) of them is the offending app here. Check them all and always properly close apps when you don't want them to be able to do this. The red and the back keys do not, btw, properly close apps...only pressing the BBKey and selecting Close or Exit truly closes down apps...the other keys leave it to the apps to decide what to do, and many are traffic generators (e.g., twitter, FB, MySpace, news readers, etc.).
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How can I remove accessibility text and voice over from the logon screen?
Before I log on to my Mac, in the logon screen I get accessibility text and voice over features enabled all the time. I can remove them by pressing cmd + f5 several times until they're gone (while I'm still in the logon screen). I would like to remove them permanently so that they never appear in the logon screen.
Can you provide an example? I've been trying (for
example) "select translate(' test one', ascii(' '),
'X') from dual" with no luck.
Thank you.To replace space, you should query like this:
select translate(' test one', chr(32), 'X') from dual instead of select translate(' test one', ascii(' '), 'X') from dual Thanks,
Dharmesh Patel -
How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)
How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)
-
How can I copy iCloud calendar and contact back to Outlook personal folder?
After I install iCloud control panel for Windows 7 and turn on, it copied everything calendar and contact into iCloud and delete everything from Outlook Personal Folder. I DONT WANT THIS!!! How can I copy iCloud calendar and contact back to Outlook personal folder?
Hi
If you go to the web site of iCloud and then to contacts there is a button left bottom where you can export your contacts as cvs files and reimport them in outlook -
How can i copy my contacts in my pc from my iphone 5 and 4s
how can i copy my contacts in my pc from my iphone 5 and 4s
You don't need to worry about the folders.
Your backup from iphone 5 will be completely seprate and your iphone 3gs backup would be safe as well.
Yes you can sync both phones in itunes and even connect them at the same time to sync.
Hope this solves your query -
I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?
You can't gift it, gifting can only be done from within the store, not from within your library.
Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them. They have a ton of books but I can only listen to them from my windows media player and I wouldlove to download to my I pod but I have tried everything I can think of it they won't go over. Someone said all I had to do was copy them over and they would convert but I can't even get them to copy. Thanks.
Well it started happening AGAIN with my 2nd IPod. No matter what I did, it Itunes would NOT restore it!
I finally installed Itunes on my hubby's PC at work and managed to get it restored there.
Apparently, there must be some sort of compatibility issue with the windows version of Itunes and some other piece of software on my pc.
And one more important thing! I had to follow the instructions in the other thread that talks about how to correctly uninstall itunes and quicktime, in order to completely eliminate ALL traces of my "first" ipod's existence so it wouldn't demand that I restore it.
I think the software got "confused" and thought when I connected my 2nd ipod, that it was the 1st and that it still needed to be restored.
Basically, this is just POORLY written and POORLY tested software! -
How can we get Dynamic columns and data with RTF Templates in BI Publisher
How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991 224 1265-D30 USES fever TX
493991 224 1265-D30 HOW TO USE one tablet daily TX
493991 224 1265-D30 SIDE EFFECTS XYZ TX
493991 224 1265-D30 DRUG INTERACTION ABC TX
493991 224 1265-D30 OVERDOSE Go and see doctor TX
493991 224 1265-D30 NOTES Take after meal TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggestif you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ? -
How do I transfer my photos and other items from the cloude to my Dell desktop
How do I transfer my photos and other items from the cloud to my Dell
desktopHello johnfromwildomar,
Thank you for using Apple Support Communities.
You can use the following articles to help you set up to share photos from iCloud to your computer.
iCloud: Set up My Photo Stream
iCloud" My Photo Stream FAQ
Regards,
Jeff D. -
I'm trying to make it so the year displays, but haven't been able to figure out how to change that. I have the Day of the Week, Month, Day and Time only and I haven't been able to figure out how to do that in the Date & Time or the Language & Region Settings.
There is no option in System Preferences. However, it may be possible to set it with a "defaults write" command.
This page shows how to set the time and date format in the Terminal, but doesn't show whether you can add the year.
http://apple.stackexchange.com/questions/75116/i-want-to-change-clock-from-12h-t o-24h-mode-via-terminal
If you can find a description of Apple's date format code that includes the year, then it may be possible. Or not.
I'm guessing Apple thinks only Time Travellers need to ask what year it is... -
Question
I used to be able to copy or drag and drop links from the address window. Now with the update, only the address is copied or dragged not the link. (Says something about not giving site information). I want to be able to drag and drop or copy links.To be more precise, you can setup a JComponent or JPanel on top of your JavaFX nodes that has a TransferHandler that can convert the (AWT/Swing) images dragged to the app to JavaFX image and then insert it into the underlying node.
As for the file chooser itselft: ListView and the JavaFX composer can allow you to create one quite easily. TreeView can aslso be used to a lesser extend (still a big buggy). For both of these, there are small bugs in the Cell API that may (or may not) prevent from displaying a proper thumbnail in the cells.
You can also use a regular JFileChooser if you do not mind the dialog box having a different LnF from the rest of your application. -
How can you download photo's and video's from an iPad to external hard drive
How can you download photo's and video's from an iPad to external hard drive for storage.
Here's the link that explains ...
http://www.idownloadblog.com/2014/06/02/apple-updates-the-photos-app-in-ios-8-to -work-with-icloud-photo-library/ -
How can i download InDesign CS6 and not CC from your website?
how can i download InDesign CS6 and not CC from your website?
Are you a cloud subscriber, or are you looking for a perpetual license or trial version?
-
How can I store an output, i.e C from the attatchment in an array?
Attachments:
Testing.vi 18 KBHi, Se
Take a look my example.
Attachments:
Testing.vi 23 KB
Maybe you are looking for
-
Have older Dell Dimension 32/bit with Win XP Prof 2002. I have installed CA security suite from my ISP, which is a huge program and uses 100% of CPU on start-up & shut down, slowing everthing to a snails pace. I have removed evrything I don't need us
-
I did all the setting to take the printout of GR WE01 is the output type i did the settings like 1 Define Printer...at OMBR 2. Enable material doc printout at OMB5 3. Also Assign the printer to WE01 output type in OMJ3 Tcode 5. Maintain the condition
-
Hi I've several questions about programming in Ae And I hope to find answers with you 1- What are the differences between : expressions and scripting ??? 2- I'm not a programmer , so , can I be proficient in expressions ? and how ? 3- again , I'm not
-
BPEL Professional in the Philadelphia area
There is a lot of BPEL activity out there, but very few professionals advertising BPEL experience. We are looking for BPEL experienced professionals. Please send resumes to [email protected]
-
I have an old SB! Live soundcard with a gameport and standard ports, I was wondering
Like I said, I have a reasonably old SB! Li've soundcard with a gameport and standard ports i.e. (speaker, mic, line in etc.) I want to get a little audio mixer to do some recording, I figured I'd have to buy a new card but then i saw this little adp