Mapping Problem: only constants are mapped the rest is missing

Hi Community,
I have a really strange problem. I mapped a message type and an external definition (a modified IDoc) in the repository. If I use the test function of the message mapping everything is fine. All values and constants are mapped correctly from source to target.
So I configured the rest in the repository and the directory and activated it. But it does not work. SXI_MONITOR details show that the source flat file is converted correctly into XML format. But the mapping is incomplete. Only the target fields with a constant as source are mapped. The normal one-to-one mappings (source flat file to external definition) are missing. Somehow they are ignored. Not even an empty tag is mapped.
What I am doing wrong?
Thanks for you help,
Udo

Hi,
Take the payload from SXMB_MONI and test it in message mapping editor.
check the problem there..
Thanks,
Madhu

Similar Messages

Why am I not able to download all the messages from the email server, only few are downloaded, the rest are not? Things were fine until last week.

I've tried all the suggestions including deleting the inbox.msf etc. I have also tried uninstalling and reinstalling Thunderbird, but none of them seem to work.

Is it hanging on the same message each time? If so go to your email providers web mail site and log into your account there. Read and delete the problem message and see if the remaining messages download.

HT5429 Map Problem: I can't see the roads in Standard view. Is there any way to improve this serious problem?

Map Problem: I can't see the roads in Standard view. Is there any way to improve this serious problem?

Hi Ben,
both BSIS selects would become faster if you can add Company Code BUKRS as 1st field of WHERE clause, because it's the 1st field of primary key and HKONT is the 2nd field of primary key.
If you have no table index with HKONT as 1st field it's a full database access.
If possible, try to add BUKRS as 1st field of WHERE clause, otherwise ask for an additional BSIS index at your basis team.
Regards,
Klaus

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

E52 internal GPS fix problem only with OVI Maps

Hi all,
I read many many E52 phones suffer Internal GPS fix problems.
I don't beleve this is an hardware problem, but only a software bug.
My experiments say this:
1) Start phone, start Ovi Maps -> No lock at all. (only 1 blinking line in bottom left corner)
2) Start phone, start McGuider (Sygic) navigator -> E52 locks quite immedeately. (in the same place!!)
3) After GPS is locked, start Ovi Maps again. Now also Maps works great!
4) Also the gps built-in application under Menu->Applications->GPS->GPS Data has the same behaviour as Ovi Maps.
Anyone can try and report this or similar experience?
Thank you!

uallaualla wrote:
Thank you for the response.
I'm sure the fix is faster if i use A-GPS, but i i have to pay for data connection.
And, above all, Sygic works perfectly WITHOUT A-GPS, so why Ovi Maps does not?
Yes, you have to pay, but the connection takes about 20sec. About Sygic you're right I noticed that too. It locks pretty fast.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Red dates for birthdays only in January all the rest are in black

I have set my calendar up and I can't find a way to make all the birthdays in red for the rest of the months. I can change the text but not the date..

i got red birthday dates on the January page, but black birthday dates on the other 11 months. please help..

TS3899 Why do I receive e-mails but not all the mail are indicated, the rest say they have been read when they haven't

My wife & I have an Ipad each, & both of us have the same problem. When we have received our e-mails only certain ones give notice of arrival, & the rest go straight to trash. How can we stop this. I can't find any settings to alter it & this is a problem as most are wanted.Thanks.

What you have there is either a jailbroken unit with some crazy custom UI or an eastern knockoff. Give us some photos of the ipad itself, mainly the back and some experts can help.
If you plug it into iTunes does iTunes even acknowledge that an ipad is connected? If it does then try a restore.
Failing that, head down to an apple store and see what they can do for you.

BIZTALK bts action mapping problem with Message Schemas for the Composite Operation

Hi,
I have a message schema made with the composite operation.
now, I have re-deployed my biztalk project and in the send port for this Oracle composite message the SOAP action header hasn't updated the correct action.
now I tried several verations for this soap action mapping and this is what I got:
><BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" >xmlns:xsd="http://www.w3.org/2001/XMLSchema">
> <Operation Name="Select" Action="http://Microsoft.LobServices.OracleDB/2007/03/CompositeOperation" />
> <Operation Name="SQLEXECUTE" Action="http://Microsoft.LobServices.OracleDB/2007/03/CompositeOperation" />
> </BtsActionMapping>
Now as you can see the Composite schema has 2 operations one is from an Oracle VIEW and the second one is an Oracle SQL querry.
please if someone could assist me with this issue?
Message Schemas for the Composite Operation
Message Schemas for the Composite Operation

For Composite Operations you don't use the Action Mapping Xml for both the SQL Server and Oracle bindings.
The Action for Oracle Composite Operations is:
http://Microsoft.LobServices.OracleDB/2007/03/CompositeOperation
by itself. No Xml or anything.

Message mapping crashes only in INterface Mapping

hi guys,
i have an issue with one of my interface mapping. the message mapping crashes when i run the interface mapping. however when i run the message mapping separately it works fine.
any hints?
thanks,
ali.

Hi Ali,
If you are using try catch then in case of catch condition if you pass null to substring it will fail.. Either you call the substring inside your udf (so that you can make sure that the filename is available then only substring is called) else handle the null condition in message mapping before calling substring...
Also you can try looking into the display queue entry for substring in Message Mapping for further analysis. Here also you will not get any filename by dynamic configuration, but i am not sure why it was not failing there.. May be display queue will help you.
Regards
Suraj

I am having trouble syncing new songs to my ipad mini. I tunes says 151 are on the ipad yet only 120 are on the actual ipad.

I am having trouble syncing my ipad mini with itunes. I have done it before and no problem. Now it lists that I have 151 songs on my ipad but there are only 120 on the actual ipad. The new playlists I tried to add are not on it. Am I missing a step.

That alone does not mean the movies are in an iPad compatible format either.
Copied from this link.
http://www.apple.com/ipad/specs/
Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.
Try this. With one of these videos selected in iTunes, at the iTunes menu bar go to Advanced and select Create iPad or Apple TV version. This will duplicate the selected video in an iPad compatible version. Select this version to be transferred to your iPad to see if this makes any difference.

Print problems only pictures are print not text

Macbook air with caonon mx870.
fonts (text) are not printing anymore only pictures ?

Hello there, marcvdw.
The following Knowledge Base article offers up some great steps for troubleshooting printer issues:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I am getting a 6 soon. But need to back up my 4S. I have two problems: one, I cannot get the rest of the videos off my phone. two, I have no plus or edit button in contacts and cannot delete or fix and bad numbers. Help

Actually, I have three problems. I had to turn off iCloud because every time I turn it on, it wipes out all my contacts. Thankfully they're on my macbook and I was able to text them back to the phone. Honestly, this is making me batty. All I want to do is preserve my information before the new phone comes in. I did do a back-up to iTunes, but will that bring all the problems over to the new phone?!?
First? I tried to edit a contact today. No edit button. Then I thought, I'll just add her. No plus sign.
Last but not least? I have a LOT of memory being taken up on my 16 G 4s with videos that iTunes and iPhoto refuse to see. I can't even figure out how to see the folder on my iPhone when it's plugged in.
Help!

lisab101,
We appreciate you reaching out to us. We greatly appreciate the feedback that you have provided us. Please know that we will lift this up to management and the issues will be addressed.
Thank you,
RobinD_VZW
Follow us on twitter @VZWSupport

I am not able to print pdf file from coursesmart website. i disabled flash plugin and only images are on the pages. When i preview, i only see blank page...help

i disabled flash plugin.
now i open site - http://www.coursesmart.com/9780495797494/2
page contains images.When i click on print preview button, i cant see anything.... also i tried all pdf plugins and extensions, but none help to convert/print page in pdf. please help. how can i print whole page to pdf?

Doesn't work in Google Chrome either.
Looks that the page has a lot of protection measures (context menu is disabled) and DIVs that overlay each other, so it is possible that the print routine only sees an empty DIV and not the image or the real page.<br />
That big image consists of two parts as you can see via Tools > Page Info > Media and the inspector.

How can I display my bookmarks toolbar with text only, but still have the rest of my toolbars (search, navigation, tabs, etc) display icons?

I have a bunch of bookmarks in my bookmarks toolbar. How can I make my bookmarks toolbar display only text but have my other toolbars (navigation, etc.) display only icons? It seems like I have to choose between icon, icon and text, or text for all of the toolbars. I want it to look like it did with my old version of Firefox. All my bookmarks in the toolbar fit, but now they dont because I cant get rid of the icons.

You can do that with the Bookmarks Deiconizer extension - https://addons.mozilla.org/firefox/addon/bookmarks-deiconizer

Dual Monitor Problem - Context Menus are in the wrong place

Hey there, I've been looking all over google to try to find a solution to this problem, but to no avail. I'm currently using a second monitor together with my macbook pro on leopard. When ever i open up a context menu, the menu appears on the first screen on the macbook and on the second monitor where i clicked to bring up the menu. This is annoying and extremely irritating. Any suggestions or ideas?
The problem for example: I'm using firefox, I right-click on a link to open it in a new window. At first it seems like the menu doesn't appear. Then I notice it has popped up on the other screen instead. What the! Any advice would be much appreciated.

Sorry, I guess this is just a bug in some programs including firefox:
https://bugzilla.mozilla.org/show_bug.cgi?id=314279

Mapping Problem: only constants are mapped the rest is missing

Similar Messages

Maybe you are looking for