MB11 & MBST accounting document ledger view wrong profit center
Dear Friends,
My user is trying make a stock correction from stock 0001 to 0003 (storage location) from MB11 transaction with movement type 411 E (with special stock indicator E).
Every thing is fine but when we look in to accounting document in entry view the entry is as below.
Offsetting account (GBB) Credit (posting key 91) - with no profit center
Inventory account (BSX) Debit (posting key 89) - With profit center ABC
When we look in to ledger view of the above document the entry showing is as below.
Offsetting account (GBB) Credit (posting key 91) - with Z_SPLITT profit center
Inventory account (BSX) Debit (posting key 89) - With profit center ABC
Zero Balance account (posting key 50) - With profit center ABC
Zero Balance account (posting key 40) - with Z_SPLITT profit center
When I looked in to the configuration of document splitting I can see the below settings.
1) Document splitting Characterostic for General ledgers - set on Profit center (Mandatory field)
2) Zero Balance Posting account is maintained
3) Constant for Document Splitting - Z_SPLITT profit center is maintained
Also for testing I posted the document from FB01 transaction code with the below entry.
Account XYZ - Debit - with no profit center
Account ZYX - Credit - With ABC profit center.
In the ledger view I can see the below entry.
Account XYZ - Debit - With ABC profit center.
Account ZYX - Credit - With ABC profit center.
Then why this is not happening when my user posting the docuemnt from MB11 & MBST?
Why the offsetting account (GBB) line item not copying the profit center (ABC) of line item of inventory account (BSX)?
also why zero balance account with Z_SPLITT account entry added?
Is the functionality is like that only or any thing in configuration or transaction level is missing?
Please guide me for the same.
Many Thanks in advance.
Best Regards,
Abdul Mazid
We had the same problem.
Make Profit Center field as Optional for Movement type 411/411E/412/412E in Transaction Code OMJJ. This worked for us. After this setting was changed the profit center from the material master was used for the movement.
We still have rules that make profit center mandatory on the FI side so profit center is not really optional.
Similar Messages
-
Profit center in accounting document is differ with profit center in PO
Dear Expert,
I have created 2 PO. 1 PO is with material number, and the other PO is without material number. both PO have account assignment category H ( Cost Center - COGS)
I also have created 2 MIGO with reference to each of the PO. but when I checked the FI document in Material document I found that the profit center in accounting document is different with profit center in PO - this problem only occur for PO with material number. Profit center displayed in accounting document is refer to ZOKB9 (user exit)
Material ledger is active for this material number.
My question is what may cause the different profit center in accounting document and in PO?
How to solve it?
Thanks
PaulineHI,
possible reasons are :
In GR document profit center pulled from PO Material :
If you have ordered with material code, must check profit center assigned into material by mm03/Plant Data2
If you have ordered without material code, than check cost center assigned Profit center by 1KE4 -
IN amount of FI document input the wrong profit center,how to handle it?
Dear everyone
IN amount of FI document input the wrong profit center,how to handle it? Transfer one profit to another or how to do it ?
Thanks,
Doris
Cross-postHi,
Are you using NEW GL or EC-PCA? If New GL, you can do manual adjustment (FI entry). If EC-PCA, you can do it using 9KE0. -
Document posted with wrong profit center
Hi guru,
I posted a FI document but I wrong the profit center. The profit center is PC dummy but I want that the posting is on another profit center. My client doesn't want to create a PC document for correct this mistake.
Is there any way for assign the cost on exact profit center? Is there any way to repost this cost from dummy to true profit center?
Thanks in advance
RegardsHi,
Either you should reverse the FI document and create it with a right profit centre or make internal PCA document. There is no other way of correcting it.
Regards,
Eli -
Wrong Profit Center Posting during J1IEX
Dear Sir,
While posting the Excise invoice through J1IEX the accounting document generated captures different Profit Center. However it should capture the profit center from Material Master. The material master Profit Center is not getting updated.
Kindly suggest.
Regards,
SaurabhHi,
Since they know the month they can use the reports S_AC0_52000888 for vendors and report S_AC0_52000887 for customers and they can give the input as wrong profit center and from period and to period and find out the document number and based upon that reversal can be passed.
Regards -
VF02 Invoice cancellation: Wrong profit center in FI but ok in CO
Hi,
I got an invoice on Billing plan with Profit center 1 (based on WBS element).
Then we changed the profit center (PC 2) of the project & WBS element and we update the Billing plan.
Then we cancel the invoice within VF02, CO posting is on the profit center 2, but when we transfer the cancellation to accounting the Profit center 1 is in FI posting and not the new one (Profit center 2).
I try to change the profit center value within FI substitution OBBH but it does not work.
The problem is only at the FI posting generation (SD posting & CO posting are ok).
Thanks in advance for your help
AymericHi,
If the invoice generated earlier is already posted on to Accounting with Profit Center 1, then when you cancel the invoice it should be posted on to Profit Center 1 only. That way, the profit center 1 will be having net zero effect i.e. debits and credits become equal.
Subsequently when you generate the invoice with the new profit center 2, it will create accounting document also with new profit center 2.
Ramanand -
Wrong profit center in accounting document
Dear Experts,
There was wrong profit center in accounting document since the user changed the profit center in material master to the correct one after posting is created.
How to make correction in Accounting and controlling side for the wrong profit center?
Please advice.
Thank you in advance.Hi,
If you want to make an update in FI, you will have to reverse the document and post it again. However, if it's sufficient for you to make an internal update in PCA, you can use 9KE0 transaction.
Regards,
Eli -
GR IR Clearing account posting to wrong profit center
Dear All,
Here I am encountering the live problem that ,
After the some customization changes , there was an impact on GR/IR Clearing account with regards to the profit center posting
When we receive (GR) , the FI document line item is posting to the different profit Center, then the PO profit center.
Stock Account is capturing PO and meterial profit Center, when G R is posted ,
GR/IR Clearing account is capturing the different profit Center(wrong profit center)
Please advise me is there is any way to correct, the wrongly posted documents,
we are trying to stop the encountering error by modifying the customisation but the problem is how to correct the error postings.
This is urgent issue ,
Please try to help me by providing proper solution as early as possible.
Thanking you
With regards
Krishna RaoHi,
What has already been posted in SAP has been posted. One alternative in front of you is to create adjustment postings in PCA to post to the correct Profit Center. You can use transaction code 1KEL or 9KE0 for the same but it may not work as most probably you will the GR/IR clearing account set to "Post automatically" in the GL Master. In such a scenario the only option would be to have customized program to create IDOCs with Message Type "PRCMAS" to post the adjustment postings in your system.
regards -
Billing document pulling wrong profit center
Having a problem getting sales revenue posted to the correct profit center. Order is created and pulls the correct profit center (1010) from the material master. When sales document is created, it is putting it to sales revenue account but with wrong profit center (2010).
Using one sales revenue account, 410000, cost center 1602 linked to profit center 2010000
Getting confused as to why my sales when posted to 410000 revenue account I don't get the correct profit center ?
Any help or suggestions for configuration - just using my sandbox.Hi,
Profit center is determined from material master for sales orders, direct assignment of accounts to profit centers, derivation rule in PCA, or via user exit (if some custom logic is inbuild in the system). Check your PCA configuration in section PC assignment to object & accounts.
Regards
Ram -
Wrong profit center in Billing document
Hi,
Currently I can't release my billing document to accounting because there is missing profit center setup in my controlling area. The profit center had been wrongly setup in the SO and there is no cancellation billing type so I can't cancel my billing and amend the SO and re-generate the billing. Is there any other way I can change to the correct profit center? Or I need to setup the wrong profit center in my CO and do adjustment to post to the correct profit center after the billing document had been released?
Best Rgds,
Li LingHi,
I would suggest setting up the profit center in CO just so this billing can be released to accounting and make an adjustment to post to the right profit center. We had to do this sometime back.
Meanwhile, may I suggest to activate the cancellation billing types and frame a rule such that billing documents passed onto accounting cannot be cancelled. This would be the best option rather than not having the type at all.
Hope this helps,
Thanks,
Siva -
Wrong Profit Center on Material document (Goods Receipt PO for Asset)
Dear SAP Expert,
When our company upgrade our SAP version from 4.6C to ECC6, all Profit Center on Material document (Goods Receipt on Purchase Order for Asset) is filled by profit center DUMMY.
This condition not happend in our previous version (4.6C). Is there any new configuration on ECC6 for Asset Accounting?
Many Thanks
Maickel PHi, Maickel:
There is a setting for Dummy Profit Center, you can check in SPRO: Controlling->Profit Center Accounting->Master Data->Create Dummy Profit Center.
And you can refer to the help of this IMG activity:
Create Dummy Profit Center
This function lets you create the dummy profit center for the current controlling area.
The dummy profit center is updated in data transfers whenever the object to which the data was originally posted (cost center, order, and so on) is not assigned to a profit center. This ensures that the data in Profit Center Accounting is complete. You can later send the data on the dummy profit center to the other profit centers using assessment or distribution.
You create the master record for the dummy profit center using this special transaction. To change or display it, use the normal profit center maintenance functions.
The name of the dummy profit center is displayed in the controlling area settings for Profit Center Accounting.
Prerequisites
The standard hierarchy must exist for the current controlling area.
Actions
Enter the name of the dummy profit center. The rest of the steps are the same as when you create a normal profit center.
Choose the function Extras -> Set controlling area first to make sure that the correct controlling area is set.
Notes on transporting
You can transport the Customizing settings for Profit Center Accounting under Transport Connection. -
MIGO Its picking wrong Profit Center
Dear All,
Account Assignment(N) purchase order i have created. While doing MIGO its picking wrong profit center. I have checked material master and Network everywhere we have maintained the exact profit center.
But MIGO its picking another plant profit center. Could pls help me to resolve this issue.HI,
Please check youe settings in SPRO --> Financial Accounting (New ) --> General Ledger Accounting (new) --> Business Transaction --> Document splitting --> Define Document Splitting Characteristics for General Ledger Accounting
Here you must have defined Partner profit center.
pherasath -
Purchase Order - Wrong profit center
Hi ,
We have a PO which is linked to a Sales order.
In the GR document, the material document, we have a Profit center called " XYZ " for this material.
But we found out that there is a different Profit center " ABC " that is coming in the Invoice document for the same PO for the same line item.
The business thinks that this is wrong and the Invoice document should have the same profit center assignment as that is assigned in the Sales order / GR document.
What is the reason the system is picking up a different Profit center for the Material document and a different Profit center for the invoice document.
Can we configure this in the system ?
And if it is defaulted from the Material Master, why is it that the system is taking two different profit centers for the same material...
Thanks,
srikanth
Moderator: double postHi,
Talk to your business team, what is real requirement now and also consult with FI/CO team
As payment done, you can go for creating a Return PO and then do GR with 161 movement type( if excise,do J1IS for to reverse excise and then print with J1IV) and finally go for credit memo in MIRO.
OR
Considering payment done to vendor as wrongly/ by mistake,so 1st check accounting document number for which vendor (with account number) in t.code:FBL1N & then reverse it with t.code: F-02 and finally clear it with t.code: F-44.Reverse all GR and MIRO document.
Regards,
Biju K -
Wrong profit center to correct profit center
Hi friends Please suggest how we correct/transfer the transactions from wrong profit center to correct profit center.
Hi
There is one concept called profit centre document. By using the same, you can transfer amount from one profit centre to another profit centre. You can also use the General Ledger also. The transaction code for the same is 9KE0.
Assign points without fail.
Regards. -
Wrong profit center posted for a customer invoice
Dear All
I have posted customer invoice with wrong profit center, is there any way to reverse the same other than FB08 as I used the transaction 9KE0 but it doesn't support customer and vendor account.
I want to correct the same through profit center only.( i.e. reducing the balance of wrong profit center and
increasing the balance of correct profit center )
Thanks in advance.
Viru.Hello,
Even if you posted a customer invoice only Control Account totals will be moved to PCA.
Hence, see the control account for the customer masteer assigned and adjust the account accordingly by posting the entry through 9KE0.
Regards,
Ravi
Maybe you are looking for
-
Any way to get rEFIt to show the Recovery HD as one of its normal options
To get ready for Lion, I uninstall rEFIt because I read about supposed incompatabilities. Well, I've seemed to have worked thru Lion's idocyncracies (and moreso Boot Camp"s problems), so I'm ready to add rEFIt back into the mix. Although it installs
-
How to maintain table CABNT in SAP?
Hi Experts, Good day! I am executing report ZMCL for Material Characteristics Report but I got no data extracted even if there is data as can be seen in the Classification tab of the material master (MM03). I tried to investigate where this report re
-
I am trying to figure out if the font display problem I am having has something to do with Fusion 4 (v15.0.5) Acrobat (vCS5.5) or Mac OS X (v10.8.3). I am using an iMac 27 inch. When I view fonts in other applications (e.g. InDesign, Photoshop, TextE
-
Why is iMac connected to TC at 130 Mpbs instead of 450 Mbps?
Hi, I just noticed that my mid 2010 iMac 27" is connected to my 2nd gen Time Capsule at only 130Mpbs. I remember seeing it at around 450 Mbps or slightly lesser before my upgrade to Mountain Lion a couple of weeks back. The thing is, my TC is located
-
Does the 2106 support 802.1q trunks. If so what do you have to do to enable a trunk port?