Message Transfomation error in Monitor

Hi All,
I have a sample Scenario FILE - FILE which maps one message to another message.
The data-types used in both the messages are same.
I get a system error in message transformation when I look into the monitor.
Error message:
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_CustomerMessMapping_</Trace>
  <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns:CustomerResponseMessage/customers. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:291)
please help me with any clues.
I mapped datatype source name to target name.
XMl source root  to target root.
elements source to elements target.
Thanks,
Meher

Hi ,
Exception message says that it is a mapping issue. You need to check your mapping
"/ns:CustomerResponseMessage/customers"
It shows error while creating customers node in target . Please chcek customers node mapping in target message type.
You can test this using by using the payload (source data) of the mapping from SXMB_MONI transaction.
Nanda

Similar Messages

  • Has anybody gotten this popup error message: ASI Eve CL Monitor has encountered a problem and needs to close

    Has anybody received this error message: ASI Eve CL Monitor has encountered a problem and need to close?
    == This happened ==
    Every time Firefox opened
    == Don't know

    I don't think this is a Firefox problem. I have the same error message and I get it regardless of whether I'm using Firefox or another browser.
    In checking [http://www.whatsrunning.net/QueryProductID.aspx?Product=16854] it is a file owned by Microsoft. I suggest you check your registry for errors.

  • Component Monitoring - Test Message - Authorization Error

    Hello all,
    When we try to send the Message using the
    Component Monitoring  ---> Adapter Engine -- > Test Message
    Its giving an Error Message :
    "Error sending message, 401 Unauthorized"
    We are using PISUPER user.Is there any specific role (or) authorization required
    for sending the Test Message
    Regards
    Ganga Prasad

    Hi,
    Make sure that no user is locked. Make sure in SU01 and also check the administration part of the integration builder. I would also suggest you to double check again whether the passwords in SU01 and exchange profile match exactly. I would suggest to enter these in capital letters.
    Additionally also make sure that the user you are using to talk to XI has the role SAP_XI_APPL_SERV_USER in XI.
    Also have a look at the discussion on the same error in the below thread....
    AbapToJavaProxy Error
    Also This happens like you mentioned because the PIAFUSER has been locked or has an incorrect password.
    Try to change the password of the same.
    When you change the password of your service user id's you need to make changes in 2 places,
    1. Su01
    2. Exchange Profile.
    Refer note : 936093 also.
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • Getting "line disconnected" error message when trying to monitor

    Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer.  Anyone else have this issue?  Any suggestions on how to fix?  I have reconfigured each camera with the router but still having the error message.  I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).

    Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
    If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras.  It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup.  However, starting on day three and on, it has worked very well.
    The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs.  All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about.  I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days.  It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log.

  • Monitoring SAPconnect message with error into RZ20

    Hello,
    I would like to send an alert by e-mail every time a message aimed at being sent outside SAP (through SAPconnect layer) fails.
    I have customized using standard help and OSS notes 546493 and 683974.
    Into RZ20, I have customized the INT node with the following data:
    maximum of alerts kept = 1
    the newest alerts are kept
    set "value obsolete" after 0 seconds
    Performance attributes
    last reported value
    threshold values : 0 for the 4 fields
    alert is triggered if the comparative value exceeds the treshold value
    Methods attributes
    start the data collection every 300 seconds
    data collection method = SAPconnect
    auto-reaction method = ZCCMS_Send_Alert_to_ALM_V2 (duplicated from CCMS_Send_Alert_to_ALM_V2)
    With this customizing, I expected to trigger an alert at every message with error.
    Unfortunately, it triggers the alerts only at the first message in error.
    I have to complete the alert manually to expect an alert trigged for the following message with error.
    Is there a way to complete the alert automatically (as soon as it is triggered) ?
    Or how can I do to achieve what I would like to do ?
    Thank you very much for your help.
    Regards,
    Fabrice

    Hello Alexander,
    yes, I have tried to set the "value obsolete" to 1 seconde.
    Indeed, the value becomes obsolete but the alert is not completed.
    Then, for the following error, I get a new value but no new alert is triggered.
    Thank you.
    Regards,
    Fabrice

  • SAP ECC error:'Migration Monitor' exits with error code 103.

    Hi All,
    I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
    I am stuck at the import ABAP.Getting error
    ERROR 2008-08-08 16:10:53
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
    1) imort_monitor.java.log-->contains
    java version "1.4.2_12"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
    Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
    Loading of 'SAPVIEW' import package: ERROR
    Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
    2)import_monitor.log
    ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPVIEW' import package is interrupted with R3load error.
    Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
    For mode details see 'SAPVIEW.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    INFO: 2008-08-08 16:10:52
    All import packages are processed.
    WARNING: 2008-08-08 16:10:52
    1 error(s) during processing of packages.
    INFO: 2008-08-08 16:10:52
    Import Monitor is stopped.
    3)SAPVIEW.log
      error message returned by DbSl:
    (IMP) INFO: a failed DROP attempt is not necessarily a problem
    (DB) ERROR: DDL statement failed
    (CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001"  ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001",  T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
    DbSlExecute: rc = 103
      (SQL error -942)
      error message returned by DbSl:
    (DB) INFO: disconnected from DB
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
    Only SAPDB: SAPSID srvice of SAP DB is only up.
    No other services of database are  up.And i am not able to up the other services also.
    Is it required to up the other services?
    If not?
    Why this error is occuring?
    Any help will be appreciated.
    Thanks&Regards
    Manisha das

    Hello Manisha,
    The one of the possible reasons for this is due to lack of H/W.
    Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
    If the issue is with H/W, then this should fix the issue.
    Hope it helps,
    Regards,
    Satish.

  • Error code = 601; message="An Error happened during call of MaxDB Tool sdbi

    I'm trying to install SAPNW7.0ABAPTrialSP12 and
    I did these steps and was able to reinstall without any problems.
    1. Run registry clean tool that came with the packaged software
    \Additional_Tools\RegCleanTool
    2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
    This is under the Software Life-Cycle Options-Uninstall
    3. Check if there are any files located in
    \Program Files\sapinst_instdir -
    delete this directory
    \Documents and SettinsThe specified item was not found.\Local settings\Temp
    delete any references to SAP
    The above steps helped me to reinstall the Trial software.
    Make sure that the system for the install meet the following requirements:
    u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
    u2022 Hostname must not exceed 13 characters
    u2022 NTFS-File system
    u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
    u2022 At least 1 GB RAM (2-4 GB recommended)
    u2022 Pagefile size according to your RAM settings.
    u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
    u2022 30 GB hard disk space temporary during installation - 24 GB permanent
    The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
    u2022 High-resolution monitor (1024x768 or higher, 256 colors)
    u2022 Make sure that no other SAP system is installed on your computer
    u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
    u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
    but it's happening the following error :
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file J:\sapdb\NSP\log.txt for details.
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks,
    Nando

    I'm trying to install SAPNW7.0ABAPTrialSP12 and
    I did these steps and was able to reinstall without any problems.
    1. Run registry clean tool that came with the packaged software
    \Additional_Tools\RegCleanTool
    2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
    This is under the Software Life-Cycle Options-Uninstall
    3. Check if there are any files located in
    \Program Files\sapinst_instdir -
    delete this directory
    \Documents and SettinsThe specified item was not found.\Local settings\Temp
    delete any references to SAP
    The above steps helped me to reinstall the Trial software.
    Make sure that the system for the install meet the following requirements:
    u2022 Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
    u2022 Hostname must not exceed 13 characters
    u2022 NTFS-File system
    u2022 Internet Explorer 5.5 or higher or Firefox 1.0 or higher
    u2022 At least 1 GB RAM (2-4 GB recommended)
    u2022 Pagefile size according to your RAM settings.
    u2022 Intel Pentium III/1.1 GHz or higher (or compatible)
    u2022 30 GB hard disk space temporary during installation - 24 GB permanent
    The actual hard disk space required is more than 32GB. It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
    u2022 High-resolution monitor (1024x768 or higher, 256 colors)
    u2022 Make sure that no other SAP system is installed on your computer
    u2022 The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
    u2022 If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
    but it's happening the following error :
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file J:\sapdb\NSP\log.txt for details.
    (Dec 6, 2023 9:32:54 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile J:/DOCUME1/Nando/CONFIG1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Thanks,
    Nando

  • Message has error status on outbd. side (error in Moni)

    Hello All,
    Iam doing soap to idoc scenario, the scenario was working fine since long time....but yesterday we had an issue...we can see the message was sucessfully processed in XI monitor and RWB, but idoc not got created in sap ecc system.
    when i checked in moni one column called Outbound status is in error status and the error is message has error status on outbd. side.....i checked the idx1, idx2,sm59......all settings are fine.
    How to reslove the issue, please help me.
    Thanks and regards,
    Chinna

    Hi
    Please check the below  i think your problem will solve
    Hi,
    Check whether IDoc was created:
    1. Execute Transaction WE05; enter correct date/time parameters etc. If IDoc found in failed status, open status records folder and double click on the failed status records to get error message.
    Check Whether IDoc is received by the Receiver:
    2. Execute Transaction WE05; enter correct date/time parameters etc and verify if the IDoc was created or not and if IDoc is in a successful status or not. If the Idoc is in Status-30(Yellow), you can push it again through Transaction BD87.
    3. If the IDoc is located and status is successful but receiver has not received the IDoc, Execute transaction SM58 to determine if IDoc is stuck in the ALE/RFC layer. If entries exist in SM58, look for Message Type
    4. If message type exist and Run the Program "RSARFCEX". If after the RSARFCEX program has ran and IDocs are not in SM58, issue should be solved. Validate in receiving system via WE05 that the IDoc was received or not.
    5. If IDoc is still stuck in SM58, check RFC connection. Go to SE37, enter function module RFC_PING. We need to have access to SM59 to test the RFC Connection.
    6. After an issue has been resolved and/or you need to process an IDoc, besides processing IDocs via programs, you can also process IDocs via Transaction BD87.
    Thanks ,
    Meeravali Dudekula

  • SXMB_MONI - Message has error on outbd. side

    Hello,
    We have occurences when interfaces appear to be successful in the SXMB_MONI monitor for processed xml messages.  The status flag = successfull.  But there is a column just in front of "Message ID" that also has another status flag. 
    When this flag is red and you hover over it, it shows the following "Message has error on outbd. side".  How can we locate a corresponding log and get some more detail behind this message?  We cannot seem to connect the dots between this red flag and a corresponding log entry to give us details of the problem.
    When it says "outbound", which system should we be examining (PI or the receiving system)?
    Thank you,
    John

    Hi,
    Select the Messge in MONI and MenugotoOutbound Channel monitor
    Double Click on the Idoc Number, this will take you to SM58 Screen
    Here you can be able to seee the reason why it got errored out at Outbound Side.
    Now in SM58Edit-Execute LUWs
    Selection screen will appear and here select all the check boxes irrespective of any Error and select the date that when these message got into Error state and all.
    And Now Execute that either in Foreground or in Background
    This will execute all the Errored messages at Outbound side will process and the Idocs will reach to R/3
    XI :  How to Re-Process failed XI Messages Automatically
    Regards
    Seshagiri

  • Status message shows  " Error in Process" in SRM

    Hi,
    At the time of Confirmation, status message shows  " Error in Process " in SRM.
    So please suggest the solution & the possible cause for the Error.
    Thanks,
    Neha

    Pl goto RZ20, SAP Enterprise Buyer monitor--confirmation and open the alerts.
    All error logs have to be there. How will you analyse otherwise as to what went wrong?
    Have you done the partner profile settings for confirmation? Defined ports in SRM? Are you on classic/extended classic?
    Nikhil

  • " SYSTEM ERROR" with ERROR CATEGORY: Message and ERROR ID : GENERAL

    HI all
    I m doing JDBC -> XI -> SOAP -> XI -> FILE ( XML) scenario .I have implemented it using  BPM .
    But ,In MONI , i am getting a "SYSTEM ERROR " with "ERROR CATEGORY : MESSAGE" and "ERROR ID : GENERAL" .and 
    One thing more is there my all adapters are active (JDBC,FILE) in runtime workbench but SOAP adapters i am not able to see it there as its services are not defined in there .Is this problem is because SOAP adapters are not defined in runtime workbench ?

    Hi Colin
    I are using SP 3.0
    I have checked the Communication channel monitoring and Adapter monitering also but in mine case when i want to see the SOAP adapter in adapter monitoring , the SOAP ICON is disabled there ,so i am not able to see whats the status of my SOAP adapter i have used in my scenario
    Thanks and Regards
    Abhishek

  • ** SMQ2 - Object is locked by PIAFUSER - Message Has Errors

    Hi Friends,
    In SXMB_MONI, for a particular message, in the Queue column, we have 'red color' time bomb symbols. It shows 'Message Has Error'. When we double click the queue. we can see an error message 'Object is locked by PIAFUSER'. So, how to solve this problem and restart the message ?
    Kindly help friends.
    Kind Regards,
    Jeg P.

    Hi
    1)  clear the queues in SMQ2,first try to activate them,if that doesn't work them delete them
    2)You may need to re-register your queues.
    Follow SXMB_ADM -> Manage Queues -> Deregister Queues
    Afterwards, re-register the queues and activate from the same screen
    3)Only use SMQ1 (outbound queues) and SMQ2 (inbound queues) if re-registering doesn't fix it. You will need to give the queues sometime to get activated so be patient.
    4)From SXMB_MONI go to Queue ID of the message, a click here shall take you to qRFC monitor.
    if the messages are stuck, you should see an entry indicating number of messages stuck in the queue.
    a double click on the entry shall take you to detailed list.
    if the messages are stuck because of any error (other than queue not registered etc for e.g. a message failure) then the first message shall show you that.
    if indeed you find a message stuck in the queue then the way is to delete the stuck message (DONT DO THIS IN PRODUCTION SERVER without being sure of what does this mean for that particular process !!) and unlock the queue from previous screen.
    5)Go to smq2 and execute F8. Then it should come as Nothing was Selected.
    If any queues are present then open a queue.if the status is SYS ERROR check the entries,right click on the status text and give save LUW.This brings queue to READY. .
    GoTo-> Qin Scheduler: check for the scheduler status to be inactive->Edit-> Activate Scheduler: status frm inactive to starting to wait.Now the queue will be RUNNING.U can see the entries in the queue moving.
    Now go to SMQ3, right click on the queue and give Restore LUW.
    6)this basically means tht message is waiting in the queue.
    in sxmb_moni go to queue Id column and double click on the entry .It will take u to SMQ2.Check the status of the queue
    If its SYSFAIL or STOP then double click on it and try to correct the error.After correcting the error send the message again.Also check whether the Queeu is Registred in transaction SMQR.
    7)Select your queue form the sxmb_moni, you will reacht he QRFC monitor.
    Here you will see some lock figures on the , Select on the 'Unlock Queues'. Activate your queues once again.
    This is if your data is correct and queue is stuck. You should only delete the queue if it has errored out due to incorrect data and you need to urgenetly process the rest of the data in the queue.
    If you drill down one step more than selct the error message and on the menu select edit-->Save LUW.
    thanq
    krishna

  • Cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    cant open itunes. get error message 7 followed by error message windows error 127.     i have redownloaded new updates with luck.   window xp

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • SAP System Message: Syntx error or generation error in a screen

    dear sap basis gurus,
    i am currently having problems signing on to our DEV server. i get this error message:
    <SID>: SAP System Message
    Syntx error or generation error in a screen.
    it won't let me log on.
    there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
    have you encountered this problem before? please help me as there we have two imminent go-lives.
    thank you very much in advance.
    best regards,
    albert

    hello nick, ashok,
    thank you very much for your responses.
    i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
    i hope i would no longer encounter the error message.
    again, thank you.
    best regards,
    albert

  • I get error message "unknown error" When trying to log on to itunes via pc, help please!

    I get error message "unknown error" When trying to log on to itunes via pc, help please!

    Hello, trolle56.
    Thank you for the question.  You may find these articles helpful in troubleshooting the error received with the iTunes Store. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

Maybe you are looking for