Message wait at outbound side

Hi All,
I am facing some problems in an XI Scenario.
The Scenario Description is as follow:
Sender: ABAP Proxy (We are using standard proxy for transferring Supplier Data)
Receiver: File using FTP as transport protocol.
We are transferring Supplier Data by executing the standard report provided by SAP. Data is successfully getting transferred from Sender System. Also I am getting checked flag in XI; But File is not getting created at the Receiver end. (Also payload is not getting generated after the call adapter step)
I have checked XML messages; the receiver determination and interface determination steps are executing successfully. Also the outbound message is successfully getting transformed into inbound message. But still file is not getting created at the receiver side. Also I am not getting any log in the FTP Server while in the runtime workbench I am getting the status of communication channel as green and no message to be processed.
Using the same FTP server I have configured other scenarios successfully so I think there can not be any problem because of the FTP Server. For testing purpose, we tried File adapter using NFS and then mail adatper at reciever side in the same scenario but still we faced the same problem.
Please revert to me if you need any more details.
Thanks,
Shiv.

Hi Shiv !
Check this weblog
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
also refer
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
ABAP Client Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Error With ABAP Client proxy
Can you check this article-also
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cbc7d790-0201-0010-bea6-c549902e93e2
Pls rewards if useful

Similar Messages

BPM Mapping error in SXI_MONITOR Message scheduled on outbound side.

When I try to process this message i get an error.
Message scheduled on outbound side.
I am using a BPM.
MI_Source -> MI_Receive_BPM -> MI_TRANS1_BPM -> MI_TRANS2_BPM -> MI_TARGET
Using EOIO in the send step Queue Name: cases
If I remove MI_TRANS2_BPM the message reaches the bpm, but with both transformation in the BPM the message gets an error in the queue where I get a green flag 'Message Scheduled on the outbound side"
This BPM was working on Friday but hasn't worked since. There have been no changes to the my development XI environment.
Some things that i have tried: Clearing the Queues (smq2), Redoing the entire scenario, clearing cpa cache.
Please help.
Thanks
Chirag

Hi,
MI_Source -> MI_Receive_BPM -> MI_TRANS1_BPM -> MI_TRANS2_BPM -> MI_TARGET
Any specific need to have the above design pattern....you can also try:
MI_Receive_BPM -> MI_TRANS_BPM -> MI_TARGET
You can use the message that you initially receive and apply all the necessary transformation on it and the map it to the target structure....
As you mentioned that if you remove MI_TRANS2_BPM your message is executed successfully...it means that the BPM transformation 2 is waiting for some event / Message....
If you need to go by the same design then you can follow the below steps to resolve the problem:
1) Check the return code of BPM in SXI_CACHE...it should be 0
2) Check for any errored instance of your BPM in SWWL (as mentioned in above posts)
3) Open the corresponding Queue and see for the messages stuck in the Queue....your Queue may be blocked....your BPM will be using a particular Queue and if any message is stuck in the Queue then all the messages that follow will get stuck in the Queue....
Now if it is only your BPM that is using this particular Queue then Delete the Queue (applicable to development environment....do not try in QA or Production environment)
4) In SXMB_MONI click on "PE" and open the Graphic Flow to see where actually your BPM has failed (possible only if the message has entered the BPM.
Regards,
Abhishek.

SXMB_MONI: Message scheduled on outbound side

Hi,
one message sticks in the integration server. The status is "Message scheduled on outbound side". Instead of the target flag there is a green flag in the column outbound status. The queue is registerd, following messages were processed succesfully. QRFC-Monitor is empty.
If I start outbound channel monitor, I can see one entry.
If i mark the outbound entry and click "display queue entry" the following message is shown (Transaction RFC):
XIAPPLUSER IDOC_INBOUND_ASYNCHRONOUS CRP_100 18.01.2006 11:00:23 Transaction executing C0A83D0E0D9C43CE11B70077 ...
What to do?

Hi Jayakrishnan Nair,
SM58 returns one entry:
XIAPPLUSER IDOC_INBOUND_ASYNCHRONOUS CRP_100 18.01.2006 11:00:23 Transaction executing C0A83D0E0D9C43CE11B70077...
So the status is still "transaction executing"...
Now I have checked WE02 in the target system and I have found the IDOC being successfully posted 2 hours ago!
It seems that you were right, that the acknowledgement was not received by XI.
I am going to delete that entry in SM58...
Hopefully this will not happen again in the future!
Thanks to all for your help! Points rewarded.
Regards,
Christian

SXMB_MONI - Message scheduled on outbound side (no queues)

Hi All,
I currently have a problem on one of our XI systems.
In SXMB_MONI all the process messages have the outbound status of "Message scheduled on outbound side" (green flag). The interface is going into a BPM process.
There is nothing in the QRFC-Monitor or in the tRFC - SM58.
I have already registered all the queues.
The XBQO queue for the BPM processing is not being triggered. This process used to work on this system, but has now stopped.
Any Ideas?
Thanks,
Matthew.

1. check in sxi_cache. the return code of ur IP shud be 0.
2. register q in smq2
3. anylogs seen from PE in moni?
or use from pg 46 for troublkeshooting from below link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283 -

XI messages status "Message scheduled on outbound side" with Green flag

Dear,
          On My XI system , i have too old messages and i want to clear those.
          In moni messages status is "Message scheduled on outbound side" with Green flag .
         When i am trying to cancel these messages i am getting a popup saying
          "Cannot cancel message because of it's status"
          And there is no queue entries for these messsage on smq1 or smq2 (perhaps deleted by someone)
          I just want to cancel these messages, please tell me if there is any way .
Thanks in Advance,
Sandeep

Dear Sunil,
                Thanks, these meesages are neither active nor used anywhere,
                Problem is somebody has manually deleted entries for these messages from SMQ1 and SMQ2.
Regards,
Sandeep

IDOC status "Message scheduled on outbound side"

Hi,
I am working on scenario file->XI->SAP R/3(Using IDOC). I am getting outbound status of IDOC as "Message Scheduled on Outbound side". When I go and see SM58 for user WF-BATCH there exists a entry with status Transcation Recorded". In SM58 if I manually click Execute LUW then only I am getting an IDOC posted in my R/3 box, but this should happen automatically.
Can any one tell me what should I do so that it gets executed automatically?
Thanks In Advance.
Yaseen Mahammad.

Most of the time it is because of the Queues and Logical system. I,e If there is no proper logical systems are created/maintained then it will give problem.
And it also depends on the rfc Dialog users.
Just check this thread-
Problem with IDOCS
Also check in the IDX1 entry...
Thanks,
Moorthy

Message scheduled on outbound side for proxy to proxy scenario

Hi All,
I am working on Proxy-to-Proxy Scenario.
When i checked my messages in SXMB_MONI, after PE tab it was showing green flag with message as
Message Scheduled on Outbound side.
Please provide the solution what i have to do.
Points will be given
Thanks
Ram

Hi Swarup,
When i clicked on PE, its leading to qRFC Monitor (Inbound Queue).
Here error was showing as Permanent Error in BPE Inbound Processing.
Could u please guide me how to procedd.
Thanks
Ram

Message stuck on outbound side of PE ( BPM)

Hi All,
I am facing a peculiar issue in Prod environment for one of my Interfaces.Around 1100 IDOCs were triggered from R/3 system and they were successfully sent out of R/3(status 03) but in XI where we are using a BPM for collecting the IDOCs , only 350 idocs have been successfully processed out of the PE while around 750 idocs are still waiting to be processed from the outbound side of BPM( the PE status is WAIT). Also the workflow steps are successfully executed but still the messages are not out of the BPM. As far as I understand there would be some internal error in processing of the message from BPE to IS . If thats the case,is there some way out get these messages out of BPM. Is there any way to Refresh the BPE cache? I dont want to resend the idocs again from R/3 and cancelling the old messages which are stuck in BPM in XI. Please suggest the right solution and do response immediately as the issue is critical.
Regards
Sarvesh Nispat

Hi ,
I was facing a similar issue , where messages after executing in IP, where yet to be deivered.
check this thread
Receiver File Adapter Problem
was basically to do with some basis parameters..
hope this helps u out
Regards,
Tauseef

Message Scheduled on Outbound Side

Hi all,
I am working on PI 7.1 and I have a IDOC-BPM-File scenario.
If i test in ESR Test tab,it works fine.But when I triggering IDOC from ECC,in SXMB_MONI ,i can see outbound status is in green and there are no entries in SMQ1 and SMQ2.
Any help is appreciated..

Hi Sahana - Did you check your integration process? SXMB_MONI_BPE?
If it is the first time you are running this scenario, make sure the backgorund jobs are scheduled.
Have a look at the below thread
http://scn.sap.com/thread/1973590

BPM : Message scheduled on the outbound side

Hi
I have messages in SXMB_MONI that have been received into my BPE. They have a status flag ok (chequered flag ) but the Outbound Status is green (message scheduled on outbound side).
The BPE would have finished by now ...been in Message Scheduled on Outbound side for the entire day now.
What has happened ? I have no error - nothing !
(there are no entries in SMQ2, nothing in SXMB_MONI_BPE in error etc etc or Short Dumps)
Please help.

I posted an OSS note on this - so answer from SAP.
Solution is to delete the old entries via RSWWWIDE report (which could also delete work items that do not have a final status.) I ran this for everything not COMPLETED.
When I send another message in - it worked fine. So the fact I had a stalled WF a week ago was affecting any new one coming in.
Drilling down into the message in SXMB_MONI from the PE I could see an Exception Handling in the MergeandSendBlock - no error given - but it did have a time of a week earlier.. anyway then in the ST22 Dump I could see wf-batch with runtime error MESSAGE_TYPE_X_TEXT.
I feel this is very poor design on the BPM processing ! oh well.
See also
#Note 836092 - Archiving/deleting work items in the XI
PS Thanks to Sudhir earlier on... You nailed it - but at that stage I did not know what you mean so did not consider this - as I had no idea what affect running that transaction would do.

Messages gettin stuck at outbound side..

hi..
my files r gettin picked up successfully.
i need to corelate them, i knw corelation is fine.
they r suppose to enter the BPM. but they r not. at the outbound side its constantly showin "messages scheduled for outbound side (green flag).
my queues r registered.n outbound queues doesnt hav anything. its constantly goin outside the same queue, QBT0*
if i want to delete my previous workitems, frm SWWL, wot all do i delete.
i mean, the cancelled, error or wot all status ones.???
this shudnt affect anything else right?
thanks..
Vishal

hi shabarish..
thanx..
but my prblem is tht im not gettin my message into the BPM..its scheduled outside itself...
does cache has any role to play wit it???
cos my cache is pretty unstable..i hav to keep refreshin the same...wit every modification i make..
i see, 2 green flags, even before u hav acheived the Chequered flag. ..:)
hw did u resolve tht..thts my issue...
regards..
vishal

BPM :: Messages not processed at outbound side

Hi Experts,
We have 1000+ synchronous messages with BPM for only two days in July which havent processed fully. Now oncoming messages are getting processed fine, but the messages which were waiting for outbound processing from July are still waiting.
inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... cant see any failed/waiting messages iin queues .. when I checked the workflow logs few are showing workflow manually edited and processed after exception.
The date messages were triggered are 10/Jun and seems one or more messages were edited on 17/jun later.
Now we would like to know which workflow thrown the exception and what they have done during manual operation.
And how to process the remaining holding messages.
Thanks in advance for you ideas and suggestions.

Hi,
As you pointed out in your post that
"inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... "
Now you have not explained your scenario completely. Still from the problem statement I can say that The BPM is waiting for some messages. There are three possible scenarios where you can see the clock symbol.
You have the option of collecting multiple messages for an interface and bundling them into one message, for example, individual sales order items into one sales order. To do so, you need to define a receiver step within a loop. The loop can finish in a variety of ways.
Payload-Dependent => The loop finishes when the number of messages received matches the number specified in the payload of the messages.
Time-Dependent => The loop finishes at a specified point in time.
Message-Dependent => The loop finishes when a specific message is received.
Once all the messages have been received, a transformation step bundles the messages collected in the container element and from them creates a message in the container element .This message is then sent by a subsequent send step.
The processes use one of the abstract interfaces as an inbound interface, and the other as an outbound interface.
Your BPM cannot be time dependant, otherwise it would have completed processing by now.
Either your BPM is message dependant or payload dependant. You need to find this out.
Check out the correlation (if) used in BPM, and the condition in BPM which stops the message collection.
Plesae check SXMB_MONI and study the messages which have been succesfully processed by the BPM, so if your BPM is message dependant you have to find out what message it needs to stop collecting the message, this you can do by studying the successful message processed by the BPM. In this case your BPM will contain a FORK step. In one branch of FORK step there will be a receive step, this is the step where you can find the message required to complete waiting stage of the BPM.
Check if this message has arrived or not.
If your BPM is Payload dependant, find out whether number of messages received by the BPM matches the expected count or not. In this case the BPM must have a container operation to count the messages received. If the count is less than required value, the BPM will remain in waiting state.
regards
Anupam

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

BPM - Message has error on the outbound side

I get this error 'Message has error on the outbound side" . I am using IDOC - BPM - JDBC. I checked SXI_CACHE and I see ret code 99 for this Integration Process. I tried to activate it. I see an error saying that ZCUST_NUMBER is not a component object of PAYLOAD. I have this context object defined on the Abstract Message Interface built to store the IDOC.
Any ideas are helpful

Michael,
The program outputs a returncode = 99 during the cache refresh of an integration process (ccBPM), with an error message that says that 'xxxx' is not a component of the 'PAYLOAD' data object.
If you are getting the above error, check OSS NOte 890760

BPM Scenario: Message has error status on outbound side

Hi All,
        I am doing one BPM scenario. In my scenario i am collecting 12 different type of idocs in BPM and bundling these idocs and sending these to the 12 different files.
        If i send 12 idocs from the R/3 then my scenario is working perfectly fine. If i send less than the 12 idocs that time i am getting the error message as "Message has error status on outbound side" with red flag.
           Can you please explain what minght be the problem. I have already checked in SM58,SMQ1 and SMQ2.
Thanks & Regards,
Purushotham

Hi Nutan,
        I hv configured my scenario as follows
1. Start
2. Block ( Deadline and Control step for cancell the process)
   3. Fork(Necessary branches 12)
      4. Loop(12 loops)
          Under loop
          a. Receive Step
          b. Container Operation( For count)
          c. Container Operation(For append)
5. Fork( Necessary branches 12)
    6. Transformation
    7. Send
8 Stop
This is my scenario. In the first Fork step i am checking end condition as total number of idocs is reached then i am sending all the data to the target system. If the idocs are not reaching with in 1 hour then i am cancelling the process.
        Now can you please tell me what is the problem.
Thanks & Regards,
Purushotham

Message wait at outbound side

Similar Messages

Maybe you are looking for