My iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

my iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

Connect the phone directly to the computer, not a hub.
Disconnect all other USB devices except keyboard and mouse.
Disable your firewall
Disable your antivirus
In iTunes if it recognizes the phone click "Restore"
If it doesn't recognize the phone:
Disconnect the phone from the phone end, leave the USB cable plugged into the computer
Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
While holding HOME connect the cable to the phone
As soon as iTunes recognizes the phone release the HOME button and it should restore.
If neither procedure works note the exact error message and post it.

Similar Messages

HT201210 i updated my iphone 3gs to iphone 6 . while installing the software it gets error and closed. then i restored my previous version. when i turned on the phone it gets usb and itunes symbol on screen. when i run itunes error is coming like server c

i updated my iphone 3gs to iphone 6 . while installing the software it gets error and closed. then i restored my previous version. when i turned on the phone it gets usb and itunes symbol on screen. when i run itunes error is coming like server contact problem. what can i do to start my phone???? plz help me

I will need a little bit of information about your phone. What kind of error are you getting?

I am downloading new itunes onto iphone 4 and it stopped before completion and now there is a usb and itunes picture on screen and is frozen

any help on getting the frozen screen off?

Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H.

HT5278 i keep getting an error occured installing iOS5.1.1

I keep getting an error message, as i try to install the update ios5.1.1. How do I fix this problem? It has not let me install since receiving the message.
HELP

It just says, an error occurred installing iOS5.1.1 is the error message. That is all it says and then goes back to install.

Iphone won't work after trying to update

I started to update, got an error message and when I clicked ok to stop the update, I noticed an arrow with a usb icon pointing to an itunes icon on the phone. Can't get rid of it. Tried several times to restart the phone-nothing. Help... Tried restarting itunes etc etc. no help.

Thanks for the info. Any other things to try before using the restore? I hadn't done a sync since I just got home after being with my grandbabies and taking tons of videos and pictures. I'd hate to lose those if there's a way around it.

Keyboard won't work after attempted 2.1 install

I have XPSP2 installed on its on HD. I used Boot Camp Beta. When I upgraded to Leopard I installed BC 2.0 and everything worked perfectly. When BC 2.1 was announced, I made sure all firmware and other upgrades were in order and then ran the upgrade as an exe from the desktop. I got error messages concerning the apple keyboard (standard Mac). Subsequent to installation the keyboard would not work at all and Device Manager stated the keyboard drivers were not installed. After several failed attempts, I uninstalled 2.1 and attempted to reinstall 2.0 from the Leopard disc. The keyboard still does not work and Device Manager shows drivers not installed. I tried installing 2.0 and 2.1 in Safe Mode and I can't. I tried to repair the existing XP using the the install disc and that causes an error message. I am at a loss as to what to do.
Help

I have a similar issue. I updated to 7.1.2 last night. Now my Bluetooth audio doesn't work.
The iPhone appears to be paired with my Bluetooth enabled car stereo, but will not play any music.
Initially the stereo said 'Bluetooth connection failed' but then I disconnected and re-paired; now both the stereo and iPhone say 'connected' but still no audio.
If I press play on the phone or stereo, there's no response.
I can confirm that my Bluetooth keyboard pairs fine and I can type, change the brightness and volume but I cannot pause or play music.
My guess is that there was a change to the iOS Bluetooth Audio functionality. One that's introduced an incompatibility with one or several of the Bluetooth audio profiles: iOS: Supported Bluetooth profiles
Vid

CM1415fnw FATAL ERROR on install, W7

All this is relative to the CM1415fnw, Windows 7, and a wireless connection.
The HP software disk that came with our CM1415fnw, unfortunately, gives only two choices for installation: (1) Install just the drivers for the scanner and the printer OR (2) Install everything which includes the drivers plus all of HP's garbage software and the scanning software. We wanted the drivers plus the scanning software, without HP's peripheral junk, and since this wasn't an option, we attempted to install the printer and then the scanner and were going to use other software for scanning ... and:
Although the printer installs as the 1410, it installs successfully using plug and play and the driver on the disk, and we can print just fine.
No such luck with the scanner. It's not recognized as new hardware (due to wireless connection maybe?), and we can't seem to get it to install in any fashion.
So, we uninstalled the printer, and tried the disk.
The full software install gets to 76 percent and then shoots a FATAL ERROR, with no other information when we attempt the full software package.
When we try just the drivers, we only get to 20-something percent and get the same FATAL ERROR.
The only option under both installs is to cancel the installation.
I can't find any information anywhere on a wireless connection and the fatal error -- only a USB connection + fatal error.
Am wondering, as it's really not clear to me reading the specs for the machine ...
Is this machine supposed to SCAN wirelessly? Or only print wirelessly?
Or, if we're using a wireless connection for printing, is our only option to scan to a USB device and then copy those scans to the laptop and/or PC?
If it IS supposed to scan with wireless connection, does anyone know how to get through the installation process?
We did, btw, attempt an install using the latest and greatest downloads from the HP site, in addition to trying the disk install. We also tried both the disk and download versions several times, with no other programs running, etc. etc.
Any suggests would be appreciated.

Since the install keeps giving errors, there might be something in your system that's preventing the install. What processor are you using? How much memory do you have in the computer? What version of Windows 7 do you have, Basic, Home, Pro, Ultimate, or Enterprise? What antivirus and firewall are you using?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HT201210 After update I can not access my ipad 2? Restore won't work get unknown error 3004

After update I can not access my ipad 2? Restore won't work get unknown error 3004

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

I was updating my iphone 3gs and when i came back to check on it, all i had on the screen was a usb and itunes logo. error -1. now my phone won't work. what do i do?

I have a iphone 3gs and while trying to update tot the new software my phone gave error -1 and went to usb and itunes logo page and says it is in recovery mode. I have tried to get it out of this mode but have had no luck. My iphone is not jailbroken, so i don't know why this is happening.

The device is in recovery mode. Connect it to iTunes and the computer and you need to restore it.

I downloaded the newest version of iTunes and now my iPhone won't work. What should I do?

I downloaded the latest version of iTunes and now my iPhone won't work properly. What should I do to try to fix this? Should I uninstall the new version and if I do, what version should I install. I am using Windows 7 and iPhone 4S.

Welcome to Apple Support Communities
They are different problems because I doubt that iTunes has been able to modify Mail, that has nothing to do with iTunes.
As you are running 10.7.4, download and install OS X 10.7.5, the most recent Lion version > http://support.apple.com/kb/dl1582 After installing the update, you should be able to run Mail

ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA

Greetings All
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - ProductionI have 4 installations of Oracle as described above(prod01,prod02, stage01, local), each on separate boxes/servers. Except for memory allocations, all are configured the same (parms).
I have a user (CM_MASTER) on each instance, again all configured the exact same except the instance installed locally on my laptop. The instance installed on my laptop has only a USERS tablespace, where as the 3 others have a 2nd tablespace established for CM_MASTER.
CM_MASTER has:
unlimited space quotas on both tablespaces (where applicable).
Has execute privilege on DBMS_DATAPUMP
Read and Write privileges on the BACKUP directory.
I am able to successfully export the CM_MASTER schema from the stage01, and my local instances.
However to the other 2 (prod01 and prod02) I am getting the following errors:
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA [REF_CONSTRAINT:"CM_MASTER"."CGP_SPE_FK3"]
ORA-04063: package body "XDB.DBMS_XDBUTIL_INT" has errors
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 8165
----- PL/SQL Call Stack -----
object      line object
handle    number name
0000001DFE3849E8     18990 package body SYS.KUPW$WORKER
0000001DFE3849E8      8192 package body SYS.KUPW$WORKER
0000001DFE3849E8      2823 package body SYS.KUPW$WORKER
0000001DFE3849E8      8847 package body SYS.KUPW$WORKER
0000001DFE3849E8      1649 package body SYS.KUPW$WORKER
0000001DEDB9C890         2 anonymous block
Job "CM_MASTER"."EXPCM_USER11" stopped due to fatal error at 15:09:17Please note that the INVALID package body is invalid on all 4 instances.
I can get the export on my local and stage01 instances to fail similarly if I grant CM_MASTER the privilege IMP_FULL_DATABASE. And then after revoking the same privilege the exports are good again.
However the error still occurs on the prod01 and prod02 instances whether or not CM_MASTER has the IMP_FULL_DATABASE privilege.
I have already tried the drop_database_statistics and then gather_database_statistics routine proposed on several other posts.
Any suggestions will be appreciated.
Thanks,
Bob

execute on DBMS_SQL must be given to public;

ORA-39126: Worker unexpected fatal error in KUPW$WORKER.PUT_DDLS

Hi!
Running Oracle 11.1.0.7.0 on HP-UX B.11.31
Patch level:
OPatch version : 11.1.0.6.2
OUI version : 11.1.0.7.0
Interim patches
Patch 7690421
Patch 8217795
I was trying to impdp an expdp dump from an identical system (architecture and DB wise) and got into:
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.PUT_DDLS [TABLE:"SMS"."STQDATA"]
ORA-06502: PL/SQL: numeric or value error
LPX-00210: expected '<' instead of '
----- PL/SQL Call Stack -----
object line object
handle number name
c000000022255d98 18237 package body SYS.KUPW$WORKER
c000000022255d98 7866 package body SYS.KUPW$WORKER
c000000022255d98 15147 package body SYS.KUPW$WORKER
c000000022255d98 3792 package body SYS.KUPW$WORKER
c000000022255d98 8532 package body SYS.KUPW$WORKER
c000000022255d98 1545 package body SYS.KUPW$WORKER
c000000010cb5f10 2 anonymous block
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.PUT_DDLS [TABLE:"SMS"."STQDATA"]
ORA-06502: PL/SQL: numeric or value error
LPX-00210: expected '<' instead of '
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 7839
----- PL/SQL Call Stack -----
Thought the dump could have been corrutped, so that tried to make things easier regenerating an empty DB schema with a few tables and tried to import them after exporting them out of the same DB, but with similar result.
Saw a few posts on the same error but nothing helped to fix the issue. Is there anything I could check to overcome this issue ?
Thanks,
Mike

Hi,
sorry to bother, do you happen to have the SR number, so that we could track it online for any progress ?
Could not find any option in the meantime. Somehow exp/imp still works so that we could reload our system but it would take much longer. Tried to rebuild the datapump package but no luck.
Thanks in advance!
Mike

Apache won't work after 10.5.2 update

Apache won't work, after I installed the 10.5.2 update.
When I type the following in the terminal: sudo apachectl -t
I get a error:
/usr/sbin/apachectl: line 81: 711 Segmentation fault $HTTPD $ARGV
Does anyone know how I can solve this?
thank you!

I too had the same problem after the auto update 10.5.2 - specifically the 2008-002 update broke my machine in a number of areas.
I downloaded the package and ran it, this seems to have mopped up the problems caused my the first run.
The update is located at:
http://www.apple.com/downloads/macosx/apple/security_updates/
Look for 2008-002 (Leopard) it's about 50MB.
Hope this works for you too.

ICloud email won't work after upgrade

iCloud email won't work after upgrade to Mountain Lion. Says pop 3 server is timing out. Solutions?

I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
My problem is TWO FOLD.
The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

IPhone 5s not working after voice over turned on

iPhone 5s not working after voice over turned on

Hello ss1997,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone will not boot past the Apple logo please follow the steps in the article below.
iOS: Not responding or does not turn on
Take care,
Alex H.

My iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen

Similar Messages

Maybe you are looking for