Need help- have no idea how to install original airport on G3 Powerbook
I just bought an ornignal airport card on ebay. I have no idea how to install it (i think it goes under the keyboard, but specifically where?) also, it didn't come with any software...do I need some kind of driver? I am so confused. All I know is that I spent over $100 for this thing and would love it if I could get it to work. Really want to go wireless...can anyone please help. (already checked all over the support page and called apple and asked them to point me in the right direction, but have gotten no where. thanks in advance.
Thea,
I get the impression you cannot return the AirPort card...this would be my first choice. Since the card is not recognized, either the card is bad or your powerbook has a hardware issue (doubtful).
Do you have an Apple Store nearby?
You might also contact your local User Group...there should be good help available:
http://www.apple.com/usergroups/
Your alternatives are these:
- find another original AirPort card (limited to the slower 11Mbps speed) to try;
- remove the internal AirPort card and buy a one of these wireless PC cards that run at the faster 54Mbps speed and are simply inserted in the PCMCIA card slot on the side of the 'book:
http://www.sonnettech.com/product/aria_extreme.html
http://www.macsense.com/product/broadband/WPE800.html
http://www.asante.com/products/productsLvl3/AL5403_XG.asp
http://www.buffalotech.com/wireless/products/airstation/WLICBG54A.html
The above cards have the Broadcom chipset that Apple's AirPort software supports. If you have already installed AirPort 3.1.1, you are ready to go.
Similar Messages
-
I was on the phone with Apple Support telling them about the MacBook I bought used for my daughter. I wanted to reset it to "factory settings" and clear everything off of it. I thought I was doing everything that I supposed to be doing but when it came to connecting to the Apple Store to restore the OS I kept getting the error message that the product was temporary unavailable. They didn't really have an answer for me so they sent me the disc. I have the disc but have no idea who to access it since I don't have what normally would be my OS screen. I can see it in Disk Utility, but have no idea what to do from this point.
My Macbook Model is A1181.Boot from the Snow Leopard DVD:
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please
Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?
-
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
ok, i have lost my ipod and i REALLY need to find it, and i have no idea how i can track it. HELP!!!!
There is no way to track a lost or stolen iPod Classic. Sorry.
Reporting a lost or stolen Apple product
B-rock -
my computer broke down and i needed to install everything new. now all my music is only on my ipod classic. does anyone have an idea how to get the music back on the computer without deleting it on the ipod?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
There were pictures originally on my computer and were somehow take from my computer completely and moved to my iphone. On my iphone it doesn't let me delete those photos and i have no idea how to move them back to my computer. HELP? I need to keep them, they are valuable to me and were supposed to have been on my computer. I have no idea how to move them back since my computer barely lets me open my iphone and acknoledge those moved photos. Please help me!!
Also in itunes on my computer i deselected the photos and their still on my phone.
-
I need help I can't remember my iTunes Security Questions and have no idea how to change them just used a $20 gift card
If you have a rescue email address (which is not the same thing as an alternate email address) on your account then you can use that to reset them : http://support.apple.com/kb/HT6170
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will have to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
My ipod touch 4th generation no longer holds it's charge for more than 40mins from full power, think it needs a new internal battery but have no idea how to go about this and am no longer covered by my guarantee. Can anyone advise me on what's best? Thanks in advance
Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use an Apple wall-mount charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know whether or not a battery problem exists.
According to Apple:
Use Your iPod Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge. -
Hi, can anyone help...trying to sync I phone 4s with I tunes, it comes up with message to upgrade iTunes on phones to 11.1 but have no idea how to? Can anyone help with how I do this or any other way to get all music onto iPhone?? Thanks.
Yes, it will keep the music.
Close all open apps or programs. Open iTunes, look for Check for Updates in the menu and click on that. Then follow the prompts.
When the update is done. Open iTunes and in the menu look for show sidebar and click on that, then connect your iPhone to iTunes, click on your phone's name on the Sidebar, review all the tabs to make sure your sync option are what you want them to be (music, movies, photos, books, etc.) and after that click sync or apply and wait for the sync to finish. -
I have a CC subscription for Lightroom and purchased the upgrade for my standalone Ver. 5 to Ver. 6, but I can't install the standalone upgrade. Anyone have any idea how to do it?
sjrozas wrote:
I'm only trying out the subscription. Thanks for being so concerned about my finances.
Sent from my mobile.
Your initial post indicated that you had a CC subscription. That seems to imply that you have subscribed. If you hadn't already purchased Lightroom 6 I would suggest that you wait until you decide about CC. You really don't need both because the Lightroom program is precisely the same except for Lightroom 6 without the creative cloud has no Lightroom mobile capabilities. But I was only trying to help. -
Hi I have an I pad 64 gig and internal wifi bought about 2 months ago. it keeps coming up with a message "this i pad has not been backed up" I have no idea how to do it can you help.
I also have an I phone 4s with the same message both are with telstra the I pad has a 12 month pre paid wifi contract and the phone is on a monthly contract.Sounds like you actually paying for cellular service and you really need to be on wifi to backup your ipad/iphone.
Normally you have to be connected to wifi and you can do manual backup by going to Settings- icloud- storage and backup and pressing backup now button. Start with your ipad, usually size of the backup smaller and return here if you encounter a problem. -
I've just brought myself a new MacBook Pro from a friend I have no idea how to use them I YouTube how to reset a MacBook Pro I done everything all we'll In till you reinstall then it say "this disk is locked"??? Can anyone help me please
I done everything all we'll In till you reinstall
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
Care to share which OS you are using?
Which MBP model do you have? -
I am still trying to update my Ipod touch 4 to the iOS 6 version. It is on the 4.3.5 (8L1) version. When I go to settings-General-it just says About and nothing about an update. I have no idea how to update it! Please help!
You can only update via the ipod with ios 5 or later.
You need to update via itunes on your computer as always.
Maybe you are looking for
-
My present Firefox version is 2.0.0.20. Do I need to install an older version first? 3.0?
-
How do I move a project between machines?
Hi, I'm an SQL Server novice. After developing some websites (VS 2005 VWD), my machine started to crumble. (e.g, SQL Server won't uninstall and lots of other software problems) So I bought a new machine and set up a clean installation of SQL Server
-
I have a datagrid that has a column of checkboxs created like this: <mx:DataGrid id="myDataGrid2" dataProvider="{myPrograms}" width="100%" height="100%" top="0" bottom="0" left="0" right="0" themeColor="#73B9B9"> <mx:columns> <mx:DataGridColumn heade
-
Two Account key to post taxes in pricing procedure
Dear Experts, My requirement is like this in pricing procedure additional tax tax conditon is there & for posting the same FI requirement is to post in VAT or CST acc key only. means if CST is applicable this additional tax should post in MWS1 accoun
-
How do I read the excitation Voltage from an NI 9237
Hello everyone, I am new to labview and have some previously set up code I am trying to work with in a research situation. We have a strain gauge connected to an NI 9237 module which in turn is connected to a cRIO-9022. Our issue is that during our