Need Urgent Help on Calculation items issue In Discoverer Plus

Dear Discoverer Experts,
I would need help on the below scenario:
A
147644.08
147644.08
Maximum: 147,644.08
B
142494.65
5149.43
Sum: 147,644.08
C
5149.43
142494.65
0
Here A, B, C are columns and C column is Calculated Item(A-B) and Maximum and Sum are Totals items, everything working fine.
The intent is that I would need the difference between totals items I mean Maximum and Sum , i.e Maximum-Sum (147,644.08 - 147,644.08) =0(in this case), but I am not able to get it, can anyone help me on this that would be greatly appreciated.
Thanks
skat

Thanks Tamir for your response, i am getting ZERO
But when i create new calculation item for examle TEST with calculation MAX(A) over () - SUM(B) over ()
then i am getting new column next to C with name TEST and with two rows of data with 0 (Zero)
like this
TEST
0.00
0.00
why am getting two rows of data, and that too can't we get this ZERO under C column at the same Row as MAX and SUM
(Or)
if not possible then after adding coumn TEST next to C column can we get ZERO in the row as MAX and SUM
either way would be fine, can any one hlep on this issue.
Thank you
skat

Similar Messages

Need Urgent help in passing items from one page to another

Hi
I have a page with item "X" holding a value. The page displays a report in which one of the fields "Devide name" is a link to Interface page. By clicking the link on "Device name" Im passing the value device name to another page and displayes all the interfaces under the device.
But I need to access the variable "X" also in the second page i:e Interface page.
Can somebody help me on this?
~rose

The problem is is P29_IV_SERVERS is defined in page 29 and Im using
UPDATE PROVISION_IV
               SET PROVISION_STATE_ID = 2,SERVER_ID = :P29_IV_SERVERSin page 50. That was my initial issue. As suugested I used the '&' and its throwinf error..
Here is my complete code.
DECLARE
LATEST_TASK_ID Number;
TASK_NAME_IV varchar2(50);
--TASK_NAME_ISM varchar2(50);
SELECT_FLAG_IV Number:=1;
--SELECT_FLAG_ISM Number:=1;
DS_COUNT_IV Number;
--DS_COUNT_ISM Number;
DS_ID_IV Number;
--SELECT_FLAG_IV:=1;
--SELECT_FLAG_ISM:=1;
BEGIN
FOR i in 1..APEX_APPLICATION.G_F10.count
LOOP
    UPDATE PROVISION_IV
               SET "PROVISION_STATE_ID" = 2,"SERVER_ID" = :P29_IV_SERVERS
               --SET "PROVISION_STATE_ID" = 2,"SERVER_ID" = 2
                WHERE
                TERMINATION_ID=APEX_APPLICATION.G_F10(i);
SELECT DELIVERED_SERVICE_ID INTO DS_ID_IV FROM DELIVERED_SERVICE
WHERE DELIVERED_SERVICE_NAME=APEX_APPLICATION.G_F11(i);
SELECT COUNT(*) INTO DS_COUNT_IV FROM DELIVERED_SERVICE_MAPPING
    WHERE TERMINATION_ID=APEX_APPLICATION.G_F10(i);
IF DS_COUNT_IV=0 THEN
    INSERT INTO DELIVERED_SERVICE_MAPPING
    (ID,
    CUSTOMER_ID,
    EQUIPMENT_ID,
    TERMINATION_ID,
    DELIVERED_SERVICE_ID,
    LAST_MODIFIED_BY,
    LAST_MODIFIED_ON)
    VALUES
    (DELIVERED_SERVICE_SEQ.nextval,
    NULL,
    NULL,
    APEX_APPLICATION.G_F10(i),
    DS_ID_IV,
    :APP_USER,
    sysdate);
    SELECT_FLAG_IV:=0;
ELSE
    UPDATE DELIVERED_SERVICE_MAPPING SET DELIVERED_SERVICE_ID = DS_ID_IV,
    LAST_MODIFIED_BY = :APP_USER,
    LAST_MODIFIED_ON = sysdate
    WHERE TERMINATION_ID = APEX_APPLICATION.G_F11(i);
    SELECT_FLAG_IV:=0;
END IF;
END LOOP;
IF SELECT_FLAG_IV=0 THEN
    IF :P29_CHECK_TASK_NAME_IV=1 THEN
        IF :P29_TASK_NAME_IV is NULL THEN
            TASK_NAME_IV:=:APP_USER||'_INTERFACE PROVISIONING_'||SYSDATE;
            INSERT INTO TASKS
            (TASK_ID,
            TASK_NAME,
            CREATED_BY,
            CREATED_ON,
            TASK_ACTION,
            TASK_STATE_ID,
            SERVER_ID)
            VALUES
            (TASK_ID_SEQ.nextval,
            TASK_NAME_IV,
            :APP_USER,
            sysdate,
            5,
            1,
            2);
        ELSE
            INSERT INTO TASKS
            (TASK_ID,
            TASK_NAME,
            CREATED_BY,
            CREATED_ON,
            TASK_ACTION,
            TASK_STATE_ID,
            SERVER_ID)
            VALUES
            (TASK_ID_SEQ.nextval,
            :P29_P50_TASKNAME,
            :APP_USER,
            sysdate,
            5,
            1,
            2);
        END IF;
    SELECT max(TASK_ID) INTO LATEST_TASK_ID from TASKS where CREATED_BY=:APP_USER;
    FOR i in 1..APEX_APPLICATION.G_F01.count
    LOOP
        INSERT INTO TASK_DETAILS
        (TASK_DETAILS_ID,
        EQUIPMENT_ID,
        TERMINATION_ID,
        TASK_ID)
        VALUES
        (task_detail_seq.nextval,
        :P29_TO_INTERFACEPAGE,
        APEX_APPLICATION.G_F10(i),
        LATEST_TASK_ID);
    END LOOP;
    END IF;
END IF;
END;I have the variables P29_CHECK_TASK_NAME_IV, P29_TASK_NAME_IV and P29_IV_SERVERS defined in page 29.
But the above query is written in page 50, so I want to access the value of these variables as set in pahe 29.. :-(

I need urgent help to remove unwanted adware from my iMac. Help!

I need urgent help to remove unwanted adware from my iMac. I have somehow got green underline in text ads, pop up ads that come in from the sides of the screen and ads that pop up selling similar products all over the page wherever I go. Its getting worse and I have researched and researched to no avail. I am really hestitant to download any software to remove whatever it is that is causing this problem. I have removed and reinstalled chrome. I have cleared Chrome and Safari cookies. Checked extensions, there are none to remove. I need to find an answer on how to get rid of these ads. Help please!

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Application Support/VSearch
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchAgents/com.vsearch.agent.plist
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Re RBA in BOP processing- need urgent help

Hi ,
i want to rerun RBA in BOP , but dont want to loose previous partial confirmation , is there any way to do ?
Ex
Mat1 quantity req = 100 confirmed 60
my SO appear as
10   100       main item requested quantity
11    60        sub-item confirmation
12    40        sub-item un confirm
I want to rerun rule in BOP only for sub-item 12 only .
I dont wana loose previous confirmation for 11 n nor i want any change in delivery date for 11 .
Is there any way to achieve this coz in re rule evaluation system consider main item .
Need urgent help .
Thanks n Regards
Nitesh

Someone please reply .
Thanks
Edited by: Ng Guan Meng on Mar 12, 2008 4:16 AM

Need urgent help! - I accidentally sycn my friend's iphone account to my company's phone. I could not swich back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age.

Need urgent help! - I accidentally sync my friend's iphone account to my company's iphone. I could not switch back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age only remember 1 password which i already try but iphone shown that " incorrect password" I checked on icloud ID and try to log in but it shown as " You Apple ID was disable for security reason. To enable your account must reset password" but so bad again, the email address that he used to create icloud ID also lock for security reason. May Apple Supporter please help reset it ASAP? I can verify that I am the iphone's owner, as it belong to company's phone.

Have your company IT department get proof that the company was the
original purchaser of the iPhone and visit a physical Apple store with
proof of original purchase, proof that person is company representative,
and the iPhone - Apple may be able to help. If no physical Apple store,
contact Apple - you will still need the same items of proof.

Need urgent help with Ifs1.1 on Solaris

We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
By the way:
Where do I have to start CTX on the IFS- or the Oracle-Side?
null

Yes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
Additionally it is strange, that we are still able to connect to the database via SqlPlus.
IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
maybe it can help?!
Mon Dec 04 23:12:20 CET 2000
Server STARTED: IfsAgents(19944) not managed
Attempting to load agent EventExchangerAgent
Agent EventExchangerAgent loaded
Server STARTED: IfsProtocols(19945) not managed
Attempting to start agent EventExchangerAgent
EventExchangerAgent: Start request
Agent EventExchangerAgent started
Attempting to load agent ExpirationAgent
Agent ExpirationAgent loaded
EventExchangerAgent: starting timer
Attempting to start agent ExpirationAgent
ExpirationAgent: Start request
Agent ExpirationAgent started
Attempting to load agent GarbageCollectionAgent
Agent GarbageCollectionAgent loaded
ExpirationAgent: computed initial delay (in ms) is: 10024504
ExpirationAgent: starting timer
Attempting to start agent GarbageCollectionAgent
GarbageCollectionAgent: Start request
Agent GarbageCollectionAgent started
Attempting to load agent ContentGarbageCollectionAgent
Agent ContentGarbageCollectionAgent loaded
GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
GarbageCollectionAgent: starting timer
Attempting to start agent ContentGarbageCollectionAgent
ContentGarbageCollectionAgent: Start request
Agent ContentGarbageCollectionAgent started
Attempting to load agent DanglingObjectAVCleanupAgent
Agent DanglingObjectAVCleanupAgent loaded
ContentGarbageCollectionAgent: starting timer
Attempting to start agent DanglingObjectAVCleanupAgent
DanglingObjectAVCleanupAgent: Start request
Agent DanglingObjectAVCleanupAgent started
Attempting to load agent OutboxAgent
Agent OutboxAgent loaded
DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
DanglingObjectAVCleanupAgent: starting timer
Attempting to start agent OutboxAgent
OutboxAgent: Start request
Agent OutboxAgent started
Attempting to load agent ServiceWatchdogAgent
Agent ServiceWatchdogAgent loaded
OutboxAgent: Done processing
Attempting to start agent ServiceWatchdogAgent
ServiceWatchdogAgent: Start request
Agent ServiceWatchdogAgent started
Attempting to load agent QuotaAgent
Agent QuotaAgent loaded
ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
ServiceWatchdogAgent: starting timer
Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Attempting to start agent QuotaAgent
QuotaAgent: Start request
Agent QuotaAgent started
QuotaAgent: starting timer
Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Freeing unlocked server 19687
ServiceWatchdogAgent: Freeing unlocked server 19666
Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19723
ServiceWatchdogAgent: Freeing unlocked server 19520
Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19519
Server STOPPED: IfsAgents(19520) not managed
ServiceWatchdogAgent: Freeing unlocked server 19712
Server STOPPED: IfsProtocols(19519) not managed
Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
QuotaAgent: Timer event: 0 active; 0 exceeded
ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
QuotaAgent: Timer event: 0 active; 0 exceeded
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in checkForDeadServices():
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in handle loop; continuing:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
null

BW error. Need urgent Help( I will give out full points).

We have BW version 3.1 and content 3.3.
We are doing loads to ODS and getting oracle partition error. It gives Oracle partition error ORA-14400. inserted partition key doesn't map to any parititon.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
(FORM)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
atabase error text........: "ORA-14400: inserted partition key does not map to
any partition"
nternal call code.........: "[RSQL/INSR//BIC/B0000401000 ]"
lease check the entries in the system log (Transaction SM21).
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
The termination occurred in the ABAP program "GP3WRFMGVS1D8IW16LLGSL4QQKH " in
"INSERT_ODS".
he main program was "SAPMSSY1 ".
he termination occurred in line 41 of the source code of the (Include)
program "GP3WRFMGVS1D8IW16LLGSL4QQKH "
f the source code of program "GP3WRFMGVS1D8IW16LLGSL4QQKH " (when calling the
editor 410).
rocessing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
rocedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in
the
AISING clause of the procedure.
he procedure is in the program "GP3WRFMGVS1D8IW16LLGSL4QQKH ". Its source code
starts in line 21
f the (Include) program "GP3WRFMGVS1D8IW16LLGSL4QQKH ".
Please help me guys. I will award points for good answers.

Dear Sir,
Now I have got the problem like yours (load to ODS and ORACLE partition error ORA-14400 with INSERT_ODS). Tell me, please - did you solve this problem?
Can you recommend me something? What did you do with partitions?
Help me, please - I need urgent help too.
GLEB ([email protected])
P.S. Sorry for my English, I havent got any language practice for a long time.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Hi,
first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
first i edited my video in premier cc
sequence 1280X720, 59,94 fps
48000hz - stereo
the i linked it with dynamik link to after, make some color correction, etc etc etc
i renderd in quicktime animation
my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

Need urgent help!!!! (combine prompt and formula)

Hi,
I am using Oracle Business Intelligence 10.1.3.3.2, and creating some reports from answers. I desperately need to combine
prompt and formula on some column.
I need to use prompt in my formula on some column.
Need urgent help !

You can use the presentation variables to pass the value of the prompt into the report or any column formula.
In the dashboard prompt you see an option called "Set Variable" where and you need to give a name to the variable.(Say Var_value)
Now the value of the variable can be simply referenced using the syntax @{var_name}{10}. Here '10' being the defualt value which is optional you can simply reference using @{var_name} and you have the value of the prompts passed.
Hope it works
Thanks
Prash

R12 AR Invoice raxinv -Customization (add columns) - need urgent help

Hi,
I need urgent help in customization of AR invoice report (raxinv) in R12. I am doing report customization for Brazil. As soon as I add one more column in report common query, build query and main query Q_invoice. Report changes to new variables in report editor q_invoice itself for example from remit_to_address_id to remit_to_address_id1 , previous_customer_id to previous_customer_id1 and start giving error that original variables e.g. remit_to_address_id , previous_customer_id are not defined in the query. Variable names and xml tags are also different from each other. even after trying to fix it, error persist.
Thanks
Anju

Hi,
I need urgent help in customization of AR invoice report (raxinv) in R12. I am doing report customization for Brazil. As soon as I add one more column in report common query, build query and main query Q_invoice. Report changes to new variables in report editor q_invoice itself for example from remit_to_address_id to remit_to_address_id1 , previous_customer_id to previous_customer_id1 and start giving error that original variables e.g. remit_to_address_id , previous_customer_id are not defined in the query. Variable names and xml tags are also different from each other. even after trying to fix it, error persist.
Thanks
Anju

Need urgent help to expend a BB school group numbers of members...

Need urgent help to expend a BB school group....The group can only accept 30 members and the school student using BB are about 6000 students that are interested in joining the group....
...Moyosoreoluwa...

I believe there is a hard limit of 30 people in a BBM group.

Need urgent help with HSDIO hardware timing

Hi everyone,
I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device.
I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
which means, my data is getting into output in every 1ms time, right? (I'm using windows)
And I want to be able to generate faster than that.
How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
In the picture can you see how I do the write into device in every iteration of FOR Loop.
Regards,
Yan.

hi, thanks for responding.
with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
regards,
Yan.

Need to do a remote wipe of my iphone - stolen 24 hrs ago and . Need urgent help on this. Thanks - Pinaki

Need to do a remote wipe of my iphone - stolen 24 hrs ago Need urgent help on this. Thanks - Pinaki
< Personal Information Edited By Host >

Follow the steps in this article:
iCloud: Erase your device
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud), then click Find My iPhone.If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.If you don’t see Find My iPhone on iCloud.com, your account just has access to iCloud web-only features. To gain access to other iCloud features, set up iCloud on your iOS device or Mac.
Click All Devices, then select the device you want to erase.If you have Family Sharing set up, your family members’ devices appear below their names.
In the device’s Info window, click Erase [device].
To erase:
An iOS device: Enter your Apple ID password. If the device you’re erasing has iOS 7 or later, enter a phone number and message. The number and message will be displayed on the screen after the device is erased.

Need urgent help on J2ME Bluetooth.

Hi all,
I really need help about run example code of j2me bluetooth.
I'm doing a MSc project about bluetooth for delivery system, I just want to use bluetooth to send an object to PDA.
I,ve tried example on "Bluetooth for Java" with Atinav library but, it couldn't work.
Do you have an example code that can run on NetBeans 5.0 with
- AvetanaBluetooth Library (purchased)
or
- normal Bluetooth.java library
I need some examples for develop on it. and also please advice me on how to run and test the programs. I really need urgent help Please help me. my email is [email protected] or [email protected]

Hi Hari,
I think that the logic needs to be build up in the DISP part of the Search help exit.
What you can do is also get the Plant in the search help as an export parameter.
Then in the Return Tab you can check if the plant = 'AA', delete the data.
e.g.
      LOOP AT record_tab.
        IF RECORD_TAB-STRING+22(2) = '90'.
          DELETE record_tab INDEX sy-tabix.
        ENDIF.
      ENDLOOP.
Hope this helps.
Regards,
Himanshu
Message was edited by:
        Himanshu Aggarwal

Need Urgent Help in PM8M-V H problem - keyboard freeze

Hi everyone,
I'm a newbie in this forum and I really need urgent help with my motherboard.
My PC specification:
Intel Pentium 4 2.4GHz
MSI PM8M-V H W7104VMS v3.4 022206 14:32:17
1GB(512MB x 2) Kingston PC3200 400MHz
Seagate SATA II 320GB ST3320620SV (set with jumper to support SATA I)
Power Color ATI Radeon 9550 256MB
Lite-On DVDRW SHM-165P6S
USB mouse, PS/2 Keyboard
I really appreciate if anyone can help to guide me in solving my problem. My keyboard tends to freeze at the part where it says "Press any key to boot from CD". This limits me to do anything until I'm totally loaded into Windows. Thus, disable me to perform any formating and fresh installation of OS. However, the keyboards works fine at the begining of the POST and in BIOS. Is there any settings in BIOS that i should perform?.....
However, I realise in order to get through the foresaid message without the the keyboard freeze up is by keep on trying to boot up and shut down until it works (but only work once, then hv to try again), but this is not a solution as if what if I wanted to have 2 OS?... I cant use the keyboard to choose either of the OS installed. I have tried to change the RAM, change keyboard, use the build in VGA, or even remove the motherboard from the ATX casing - result: still have the same problem. What should I do??.. I have look around the forum for answers but there isnt any (I hope I didnt miss any). Is there any problem with my motherboard, or its BIOS, or any of the harware compatibility or etc..... what actually can I do?
I do not dare to perform any BIOS update Unnecessary (it seems that many have problems with BIOS problem in this forum) and moreover i think my BIOS is the most up-to-date. I cant find any new version in the net. Anyway I will check this topic frequently as possible to hope for any solution. What is the best solutions?
Thanks.

But the thing that makes me wonder is, my BIOS version is the latest but why this type of problem occurs??
What version of BIOS should I use?? Any recommendation ??
Thanks.

Need Urgent Help on Calculation items issue In Discoverer Plus

Similar Messages

Maybe you are looking for