Not able to open secure web pages

Hi Members,
Their seems to be some problem with my internet. I hope i can get some answer to it. After i had my firmware update for my macbook (leopard 10.5.2 combo updated), it became very slow and gave me kernel panic. Last week i had to format my HDD and re-installed Mac OSX. Now i see some very serious problem. Neither i can use my macbook to log in to dicussion forum and not able to open any secure websites like facebook.com, hi5.com and microsoft.com and support.apple.com. Its pulling my nerves.
Kindly Help.
Regards
Vikram

Thank you so much for the helpful information. Let me tell you in brief...
"Hi,
It has been an ongoing problem with my mac book. I have to use a PC to log in to my discussion forum to know about my questions. I am using a macbook (leopard 10.5.2 combo updated) and i had done a complete re-installtion of the Mac OSX as i had a kenel panic after i had created another account to check the problem with safari (as on a telephone call with apple support). Then i am not able to log into my account even on .mac account too. I had firefox but i had to do too much of "forced quit" when i had to close. Even my "SENDING ERROR REPORTS" FAILS everytime.
All this started when i had some software updates from the website. How can i get rid of this problem. Further, while using any pc on the same network, i have the same problem. Is it a hardware / Mac OS software related problem or the Network (ISP) related problem....
Plzzzzzzzzzzzzzzz Help. "

Similar Messages

When I upgrade to FF 26 on my PC laptop, I am no longer able to open any web pages on any browser. Help

Whenever I upgrade to FF 26 on my pc laptop I am no longer able to open any web pages on my laptop in any browser. If I reset my system to a previous date I am good to go. Any ideas on what may be going on or how to troubleshoot it? I am not a technical person - btw
My connection to the internet still shows as connected, but I cannot open any web pages.
thanks,
Bill

Is this happening on a computer running Windows (you posted with as Mac)?
If this is an issue on a Windows computer:
It is possible that security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

I am not able to open any web site. I get an "Unable to load page" message.

Firefox crashed last night. When I tried to reopen, it gives me "unable to load page" error. I tried several websites and same message. I removed firefox and re-downloaded it. Same thing.

Still not able to open sites.

Safari Not Able to Open .Mac Web Gallery

This is a very unexpected error. A friend sent me his web gallery link and Safari is not able to open the page. An error message appears:
"This browser is incompatible with .Mac Web Gallery.
We support the following browsers:
Mac OS X
Safari 2.0 or later (requires Mac OS X 10.4.10 or later)
Firefox 1.5 or later"
Now that is very unexpected because I'm using OS X 10.5.1 and Safari 3.0.4. Wouldn't you know that I can launch it just fine using Firefox. I don't want to use Firefox and thought I would be able to use an Apple product (Safari) to actually open Apple technology (web gallery).
This is the only issue I've experienced after Leopard upgrade and the most annoying. I've provided Safari Bug feedback, but I don't expect a response.
I'm looking for someone out there to help me through this issue. Otherwise, I hope Apple is listening. Don't give me a reason to switch back to FireFox.

Hi,
From previous postings here it seems to be a problem with the .Mac Gallery rather than Safari. Anecdotal reports seem to suggest there is insufficient bandwidth on those servers and when they get bogged down they mis-report the error message you saw.
Check in the [.Mac Web Gallery|http://discussions.apple.com/forum.jspa?forumID=1199] forum to see if they have some more concrete information.

Not able to view my web pages in Safari

I am having problems viewing my web pages in the Safari browser and wondered if anyone can help solve the mystery?
The site was created in iWeb '08, and was loaded to .Mac. I did not want the site to be hosted on .Mac as I already have a domain, but the CNAME process that is described by .Mac is not supported by my hosting service, so I had to ask my hosting service (Freeola) to route the service to their servers and provide masking so the .Mac address would not show in the browser bar.
This works absolutely fine in Firefox and the page loads up without a problem.
However, when I enter the site address in the Safari browser, the name appears in the bar, and then the blue progress bar does 2 sweeps and then a blank page appears, but with the site mame at the top of the window. If I click the cursor on any point on the bank page, a grey horizontal line appears, and then disappears, but still no opening page!
I cannot work out whether this is an issue with the original coding in iWeb '08 and a compatability issue with Safari ( I am using v2.0.4 on all my 3 machines, and the problem is the same), or it's something to do with the way my hosting service is routing the site.
I have asked others to view the site on PC's using IE, and they do not seem to have a problem so far.
I am not a web designer, and know absolutely nothing about writing code and HTML, hence using the simplicity of iWeb, but this seems a strange thing to happen. If I enter the original .Mac site hosting address in Safari, the site shows up just fine!!
Has anybody else had this type of problem?? Any help would be gratefully received, as this thing is driving me crazy!!
Cheers.

Further to my earlier post, I have just read an entry noting that if you already own a domain name, and ask your hosting service to forward and mask your iWeb '08 created, web.mac.com site to your personal domain, chances are that due to the masking of the site on web.mac.com, Safari browsers interpret the masking as being the end of the site, and as such, just return a blank page?
This may explain the problem. However, call me old fashioned, and possibly a little naive, but surely this cannot be the problem?? It's OK in Firefox!

Safari 4.0.3 can no longer open secure web page...

Our business uses the following on-line platform login page which we've used for years...
https://trading.insigniafutures.com/
Since updating to Safari 4.0.3, we can no longer access this page. When we try, we get a blank white screen and then Safari downloads a file "trading.dll.html" to the desktop. This error occurs on all of our 7 Macs we have, from Mac Pros to Mac Books.
Now we are forced to use Firefox (which handles the web page with no problem) which we really don't care for. We prefer to use Safari.
Anyone know of a fix for this?
TIA
Joe

HI,
Open Keychain Access (Applications/Utilities).
Select Passwords on the left. Then on the right delete this file: com.trading.insigniafutures.com
Then from the Safari Menu Bar, click Safari/Preferences and select the AutoFill tab. Make sure usernames and passwords is selected.
Try accessing that site now. If that doesn't help then go here and try Safari Maintenance
Carolyn

Not able to open a webi document in java

final String CMS = "pundl10492:6400";
          final String userID = "administrator";
          final String password = "";
          final String auth = "secEnterprise";
          IEnterpriseSession enterpriseSession = null;
          try
               ISessionMgr mySessionMgr = CrystalEnterprise.getSessionMgr();
               enterpriseSession = mySessionMgr.logon(userID, password, CMS,auth);
               System.out.println("Session created : "+ enterpriseSession.toString());
               if (enterpriseSession != null)
                    IInfoStore iStore = (IInfoStore)enterpriseSession.getService("InfoStore");
                    ReportEngine reportEngine = (ReportEngine)enterpriseSession.getService("WebiReportEngine");
                    final String query = "SELECT SI_ID, SI_NAME FROM CI_INFOOBJECTS WHERE SI_KIND = 'Webi' " +
                                                  "and SI_NAME like '%Least Accessed Documents%'";
                    IInfoObjects objInfoObjectsWIDs = (IInfoObjects) iStore.query(query);
                    IInfoObject objInfoObjectWID = (IInfoObject) objInfoObjectsWIDs.get(0);
                    int docId = objInfoObjectWID.getID();
                    System.out.println("docID : "+docId);
                    DocumentInstance doc = reportEngine.openDocument(docId);
                    FileOutputStream l_fos= null;
                    String fileName = "morcom" + "_" + userID+ "."+"xls";
                    l_fos = new FileOutputStream("D:\\_workarea\\MORCOM_POC\\reports\\"+fileName);
                    BinaryView docBinaryView = (BinaryView)doc.getView(OutputFormatType.XLS);
                    byte[] b = docBinaryView.getContent();
                    l_fos.write(b);
                    System.out.println("File created");
          catch(Exception e)
               e.printStackTrace();
I am trying to open a document and the code iam using is given above. I am using BO XIR3 and i get
Exception in thread "main" java.lang.NoClassDefFoundError: com/crystaldecisions/celib/trace/h
     at com.businessobjects.sdk.plugin.desktop.webi.internal.d.<clinit>(Unknown Source)
     at com.businessobjects.sdk.plugin.desktop.webi.internal.WebiFactory.makePlugin(Unknown Source)
     at com.crystaldecisions.sdk.occa.pluginmgr.internal.PluginMgr.getPluginInterface(PluginMgr.java:291)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpack(InfoObjects.java:409)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.startUnpack(InfoObjects.java:361)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:712)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query(InternalInfoStore.java:566)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query(InfoStore.java:167)
     at BOTest.main(BOTest.java:42)
error at this line:-
     IInfoObjects objInfoObjectsWIDs = (IInfoObjects) iStore.query(query);
Can anyone give a code snippet for opening a webi document in release3. The same code works in release 2.
Thanks
Shruti

You have a "NoClassDefFoundError", so a code snippet won't help.
XI Release 2 -> XI 3, then jar files have been renamed and object files refactored.
You've ended up with mixed XI Release 2 and XI 3 jars.
Remove your jars and re-add from XI 3.
Sincerely,
Ted Ueda

Not able to access secure web sites

I have a satelite modem that connects via WAN port to my Airport Extreme which then is connected via LAN port to Netgear ethernet card on my PC. After just getting the broadband last week, I noticed that I cannot access certain secure sites such as my bank or american express site on my PC but I can do it via wireless from my PowerBook G4. When I bypass the Airport extreme and connect the modem directly to the PC ethernet card, I can then acess the secure sites on my PC.
Can some please help to solve this so that I can acess the secure sites on my PC as well when using the Airport Extreme?
After taking to tech supprot at the Hughes.net they say that the router is somehow blocking the sites into the PC- something about a MTU or something like that?
Thanks for your help
Faltu1

Thanks Duane for your prompt reply.
My knowlede of computers in very shameful. I am not aware of any software on the PC that has the wireless port more restricted. All I have is the AVG free Anit-virus and the Free Microsoft Fire Wall installed.
If it is a software blocking the ports; how can find out which one it is and what can be done to fix it.
Are there some settings on the AEBS that can be adjusted for it to communicate better with the PC to all the sites to pass through.
I did find some thing on the appple web site about restricted website but I don't understand what it means and wether it really applies to my situation. See below:
Restricted address ranges
Using AirPort Admin Utility or AirPort Utility, check the "Public" or "WAN" IP address. If this address starts with a "10" or "192", your ISP is using restricted address ranges. This may affect the ability of the base station to share the Internet connection among computers. If you have difficulty connecting to some websites when the base station has a public IP address beginning with 10 or 192, use AirPort Admin Utility or AirPort Utility to turn off connection sharing for the base station. Only one computer will be able to connect through the base station. If you have a broadband modem, you may need to unplug its power supply for a few seconds to reset it. If that resolves your issue, contact your Internet service provider. In this configuration the base station is serving as a wireless bridge between your computer and the ISP, rather than as a wireless router. To connect more than one computer, your ISP would need to assign additional IP addresses to your account.
Thanks for your help again.

TS4009 I just downloaded ios5 with the iCloud and I am not able to open iBooks or pages which has my store sold information that I'm OT angle to receive any longer how can i get my old information back please?

I have downloaded with iCloud and Icahn not retrieve my old information that. Was stored in page sand I books.when I tap on the app it does not do anything .how can igetmy information that was stored previous before I added this new feature?

This is very serious. Your computer got infected with ransom malware, Cryptowall.
Go here for further info.
CryptoWall 2.0 Anything Good about Buying you Keys? - General Security
CryptoWall and DECRYPT_INSTRUCTION Ransomware Information Guide and FAQ

I Not able to open saved pages in safari 8.0.3

I Not able to open saved web pages of safari in safari 8.0.3. Everytime i try to open a file it directly takes me to the TOP Sites page.... I am also not getting a option to reset safari.
Please help!!

1. Safari > Preferences > Extensions
    Turn those off and relaunch Safari.
    Turn those on one by one and test.
2. Use free AdwareMedic to remove adware
    http://www.adwaremedic.com/index.php
   Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
   Once done, quit AdwareMedic.

Jrun struts oracle jdc - not able to open pages

Hi,
I am using JRun4 / JDK1.4.2 with struts. I use Oracle JDBC for RDBMS.
My prob:
I am able to open the index page and created a login validation which is done by JDBC. Here I have a bean to validate the login and set the attributes accordingly. Now if I say submit with valid login details, it doesn't go to the next page.
I have the following log info:
2702 / 2738 19/09 14:38:44 info [axis] Tiles definition factory found for request processor ''.
2703 / 2738 19/09 14:38:44 user FlashGatewayServlet: destroy
2704 / 2738 19/09 14:38:44 user FileServlet: destroy
2705 / 2738 19/09 14:38:44 error Session data is not serializable (ID=1a302046491095597421138) - session is lost
2706 / 2738 19/09 14:38:44 info 1 session(s) persisted
2707 / 2738 19/09 14:42:57 info JRunDataSource bound to JNDI under name ddd
2708 / 2738 19/09 14:42:57 info JRun DataSourceService: Created JDBC XA Connection Pool named ddd
2709 / 2738 19/09 14:42:57 info Bound a LinkRef from "DefaultDataSource" to the default DataSource "ddd"
2710 / 2738 19/09 14:42:57 info JRun Web Server listening on *:9000
2711 / 2738 19/09 14:42:57 info Deploying enterprise application "JRun 4.0 Internal J2EE Components" from: file:/C:/JRun4/lib/jrun-comp.ear
2712 / 2738 19/09 14:42:57 info Deploying EJB "JRunSQLInvoker" from: file:/C:/JRun4/lib/jrun-comp.ear
2713 / 2738 19/09 14:42:58 info Deploying enterprise application "default-ear" from: file:/C:/JRun4/servers/PPTU/default-ear/
2713 / 2738 19/09 14:42:58 info Deploying enterprise application "default-ear" from: file:/C:/JRun4/servers/PPTU/default-ear/
2714 / 2738 19/09 14:42:58 info Deploying web application "Struts Blank Application" from: file:/C:/JRun4/servers/PPTU/default-ear/
2715 / 2738 19/09 14:42:59 info Web Services in default-ear#default-war:
2716 / 2738 19/09 14:42:59 info AdminService
2717 / 2738 19/09 14:42:59 user JSPServlet: init
2718 / 2738 19/09 14:42:59 user action: init
2719 / 2738 19/09 14:42:59 info [axis] Initializing, config='org.apache.struts.util.LocalStrings', returnNull=true
2720 / 2738 19/09 14:42:59 info [axis] Initializing, config='org.apache.struts.action.ActionResources', returnNull=true
2721 / 2738 19/09 14:43:00 info [axis] Initializing, config='resources.application', returnNull=true
2722 / 2738 19/09 14:43:00 info [axis] Tiles definition factory loaded for module ''.
2723 / 2738 19/09 14:43:00 info [axis] Loading validation rules file from '/WEB-INF/validator-rules.xml'
2724 / 2738 19/09 14:43:00 info [axis] Loading validation rules file from '/WEB-INF/validation.xml'
2725 / 2738 19/09 14:43:00 info Recovering 1 session(s)
2726 / 2738 19/09 14:43:00 info Deploying web application "Struts Blank Application" from: file:/C:/JRun4/servers/PPTU/DevelopmentProjects.war
2727 / 2738 19/09 14:43:00 user JSPServlet: init
2728 / 2738 19/09 14:43:01 user action: init
2729 / 2738 19/09 14:43:01 info [axis] Initializing, config='org.apache.struts.action.ActionResources', returnNull=true
2730 / 2738 19/09 14:43:01 info [axis] Initializing, config='resources.application', returnNull=true
2731 / 2738 19/09 14:43:01 info [axis] Tiles definition factory loaded for module ''.
2732 / 2738 19/09 14:43:01 info [axis] Loading validation rules file from '/WEB-INF/validator-rules.xml'
2733 / 2738 19/09 14:43:01 info [axis] Loading validation rules file from '/WEB-INF/validation.xml'
2734 / 2738 19/09 14:43:01 info Deploying enterprise application "Flash Remoting EAR" from: file:/C:/JRun4/lib/flashgateway.ear
2735 / 2738 19/09 14:43:01 info Deploying web application "Flash Remoting" from: file:/C:/JRun4/lib/flashgateway.ear
2736 / 2738 19/09 14:43:01 user JSPServlet: init
2737 / 2738 19/09 14:43:01 user FlashGatewayServlet: init
=================
Can anyone pl. help whatz goin on here???
Thanks
sara

Hi, welcome to OTN form:
Please paste OS /DB version.
Please check below Step:
In Windows:
C:\Users\a000364>set ORACLE_SID=ORCL
C:\Users\a000364>echo %ORACLE_SID%
ORCL
C:\Users\a000364>sqlplus / as sysdba;
SQL*Plus: Release 10.1.0.5.0 - Production on Thu Nov 21 15:05:56 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
In Linux OS:
bash-3.2$ export ORACLE_SID=ORCL
bash-3.2$ echo $ORACLE_SID
ORCL
bash-3.2$ sqlplus "/ as sysdba";
SQL*Plus: Release 11.2.0.3.0 Production on Thu Nov 21 15:06:58 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>

My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fi network. I have reset the network settings and still Safari will not open any web pages. Help!

My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fe network. I have reset the network settings and still Safari will not open any web pages. Help!

Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding". I am not able to connect with anything on the Internet. Frustrating since I am able to connect with my laptop. Thanks for the suggestion.

When i try to open a web page, a blue screen appears and it is telling me " safari cannot open the page because i am not connected to the internet. i have an iphone, no problem and a laptop with connection - no problem - not sure what the trouble is.

when i try to open a web page, a blue screen appears - message says - sarfari cannot open the page because it is not connected to the internet. i have an iphone - no proble and a laptop - no problem as well.
what is wrong?

There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Not able to open Modal Page through a report attribute link

Dear All,
Not able to open Modal Page through a report attribute link, kindly help me...
I am using skill builders modal page plugin ...
Thanks and Regards,
Madonna

Here's what you have to do.
You set up your column link like this:
Link text: whatever you like
Link attributes: onclick="return false;" class="open_modal"
Target: Page in this application
Page: number of the page you want to open in your modal window
You set up your dynamic action like this:
Event: Click
Selection type: jQuery selector
jQuery selector: .open_modal
(notice the dot at the beginning!)
Action: SkillBuilders Modal Page (2.0.0) [Plug-in]
Event Scope: Dynamic
And finally, in your True Action (SkillBuilders Modal Page (2.0.0)), URL Location should be set as Attribute of Triggering Element.
And that's pretty much all it takes.
Hope this helps.

Can not open any web page in Safari

can not open any web page in Safari on the IPad. All other wireless features work fine.

If this does not work then try a reset ,
Reset your iPad by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPad will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back.

Not able to open secure web pages

Similar Messages

Maybe you are looking for