NW ABAP - Error Message: Signal c00 received by operating system

Hi,
I have a problem starting the NSP instance. I have installed JAVA trial and then ABAP Trial.
The SAP Management Console form the JAVA Installation recognizes the ABAP Installation and adds an Application Server entry.
Starting the JAVA instance is no problem and obviously has to be done before starting ABAP.
But when I start the ABAP instance named NSP I received the first time two error messages:
- SAP-Basis System: Operating system call getservbyname_ failed (error no. 0 ) and
- SAP-Basis System: Signal c00 received by operating system
I got rid of the first one by prociding according to SAP Note Number: 39227:
- I added the entry "sapmsNSP 3600/tcp " to my service file (%windir%/system32/drivers/etc/services)
after that at least the process msg_server.exe started properly
the disp+work.exe remains unstartable throwing still the second error message at me. Another message can be seen in the Syslog which is not marked as an error:
"SAP-Basis System: > 3 possible network problems detected - check tracefile and adjus"
Anybody an idea how I can get the ABAP instance running ( I hope I don't have to uninstall the JAVA instance )?
Thanks for your help
Torsten

Hi,
What's the instance numbers of your two SAP systems?
If you first installed the Java system it's normally 00 and 01 for SCS and Java Instance. The ABAP system has to have an higher number (I always use a number +10 as the other instance e.g. 10 for the ABAP system to be on the save side).
Seems your ABAP system now use the message Server of the J2EE Engine (sapmsNSP 3600/tcp) Check the profile of your ABAP system, there you will find the right entry for the message server to connect too.
Hope this helps a little bit.
Regards,
Daniel

Similar Messages

Signal c00 received by operating system

Hi Experts,
In the sytem error log, SM21 we got an error "Signal c00 received by operating system" with the following documentation.
"Due to special circumstances (for example, memory overwritten), the current process has received a signal from the operating system and its signal handling routine has been invoked. For security reasons this process is terminated. A dump is written which shows the error context". Following this, we got the error messages below and the system restarted the processor UP2. Today itself we got this error 2 times in different situation and end up with the processor restart.
Please help me to find out and fix the cause of this error.
Signal c00 received by operating system
Database error 24909 at SEL access to table REPOLOAD
> ORA-24909: call in progress. Current operation cancelled
> Include ??? line 0000.
Run-time error "DBIF_REPO_SQL_ERROR" occurred
Database error 24909 at FET
> ORA-24909: call in progress. Current operation cancelled
Database error 3114 at FET
> ORA-03114: not connected to ORACLE
Database error 3114 at FET
> ORA-03114: not connected to ORACLE
SQL error 3114 . Work processes in reconnect status
> Include ??? line 0000.
Run-time error "DBIF_REPO_SQL_ERROR" occurred
> Include ??? line 0000.
Run-time error "DBIF_REPO_SQL_ERROR" occurred
> Include ??? line 0000.
Run-time error "DBIF_REPO_SQL_ERROR" occurred
> Include ??? line 0000.
Run-time error "DBIF_REPO_SQL_ERROR" occurred
Stop Workproc26, PID 4540
Start Workproc26, Pid 4488
Thank you.
Govind

We got short dump "SYSTEM_CORE_DUMPED" and created a message to SAP and they suggessted to do following patch upgrades.
1)Due to some known errors in 700, you should update to the latest
kernel patches per note 19466 and for Oracle note 871096.
Note 871096: Oracle Database 10g: Patch sets/patches for 10.2.0
Note 19466: Downloading SAP kernel patches
2)There's also another note out there regarding the database error:
The error: "Database error 24909 at SEL access to table REPOLOAD"
is described in attached note 952388. as you are on oracle 10.2.0.2
please refer to:
o 10.2.x
Thank you for your immediate response.

I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

I'm running Mac OS X version 10.6.8 How come I get this error message "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." When I Try to download a FREE trail?

Hi Brizill,
Please refer to the help document below to understand the technical specifications for the same:
System requirements | Photoshop
Regards,
Sheena

Background Job Terminating with Signal 4 received by operating system

Hi ,
There is a zee ABAP program which is working fine in foreground but the same was not working at BACKGROUND when I shedule the job with the same zee ABAP program. the job is terminating with "Job also cancelled due to process termination. See the system log" But the same was worked previous at background too, there are no changes to the program too.The problem was with only this zee ABAP program for remaining are all working fine.
St22:
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
           Last error logged in SAP kernel
Information on where termination occurred
The termination occurred in the ABAP/4 program "ZSDUZ980" in
"ADD_NO_ACTIVITY_RECORDS".
The main program was "ZSDUZ980".
The termination occurred in line 1174
of the source code of program "ZSDUZ980" (when calling the editor 11740).
The program "ZSDUZ980" was started as a background job.
Component............ "Taskhandler"
Place................ "SAP-Server witco-10_NCQ_00 on host witco-10 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 7209
The error reported by the operating system is:
Error number..... " "
Error text....... " "
System Environment
SAP Release.............. "31I"
Operating system......... "AIX"
Database type............ "ORACLE"
SAP kernel............... "31I"
SAP database version..... "31I"
Thanks
Sambi

Hi Mark,
Thanks for the reply,
Below are the memory details in our system, according to the Notes you send to me, They have set it as it is.
abap/heap_area_dia                          188743680
abap/heap_area_nondia                       400556032
abap/heap_area_total                        838860800
abap/heaplimit                              25165824
The same Zprogram was worked before in the BAckground, But from last week it stop working. But there are no chages happen to this zee ABAP program.
Thanks
Sambi

Error message when updating to new operating system

I just bought the iPhone 4 and it did not have the new operating system. When I try to download it my itunes goes through the whole process and then tells me there was an error and to make sure to check my network settings are correct and my network connection is active. Any ideas??

Hi there! I'm new to Apple Discussions but I'm willing to help in anyway I can. Please correct me if I am wrong.
Try turning off your firewall, something could be blocking it. I also suggest a restart of your computer system, it may fix a few of those pesky bugs. It usually works with my other application problems.
Hope I helped.
iOS-Apple

Error message "You are running an operating system that After Effects no longer supports. Refer to the system requirements for a full list of supported platforms." when trying to download free trial of after effects. What do I do?

I need help, I am an idiot and have an assignment due today at 1:30pm. I thought that I would be able to do a simple download, but I get this error msg and I don't know what other options I have. Is it 100% impossible for me to download this on my machine?

Hi ,
I am afraid you would not be able to use After Effects CC 2014 and CC, as there were not testes on version 10.6.8.
I have two suggestions to make for you.
Upgrade your machine to latest hardware and software as per system requirements and try to make the most of it.
Multicore Intel processor with 64-bit support
Mac OS X v10.8 or v10.9
4 GB of RAM (8 GB recommended)
5 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive fi le system or on removable flash storage devices)
Additional disk space for disk cache (10 GB recommended)
1440 x 900 display
OpenGL 2.0–capable system
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated ray-traced 3D renderer
Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.*
2. You can try to use After Effects version CS 6 on your machine.
Download link : Download CS6 products
Thanks,
Atul Saini

To whom this may concern, I'm having troubles with uploading Flash Files Online throught Adobe Flash Professional and I would to correct the Error Messages I've received as an indication that I need to correct them in order to test a Flash and Shockwave F

To whom this may concern, I'm having troubles with uploading Flash Files Online throught Adobe Flash Professional and I would to correct the Error Messages I've received as an indication that I need to correct them in order to test a Flash and Shockwave Files I have stored into the Software of Flash!. Could you please help me get this matter resolved? Gerard Hargrove.

what exactly are you trying to do and attach a screenshot of the error message, if it's in english.

I just installed Lion and the newest version of Logic express 9 (9.1.5) and every time i playback audio I get this error message: [Disk is too slow or System Overload. (-10010) . Never had any issues before now...

I just installed OSX Lion (10.7.2) and updated to the newest version of Logic express (9.1.5) on a macbook and every time I playback audio I get this error message: [Disk is too slow or System Overload. (-10010) The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time]
Never had any issues before now... any ideas?

Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
You'll have to setup the program again.
cheers
rob

Error Message: Not enough memory for operation.

Hi All,
I'm having problem when try to connect to Oracle DB, check my details as below :
Connector : Microsoft ODBC for Oracle
Database Expert : Using Stored Procedure to populate data to excel.
Server Used: DBCCSWST125.reportjobserver
Error Message: Not enough memory for operation
Problem occurred when I tried to use stored procedure in my rpt file.
Thanks.

You are using multiple versions and it's still not clear what is happening but the CR 2008 reports should not be published to BusinessObjects Enterprise XI R2. CR 2008 has functionality that XI R3 does not support.
Create reports in CR XI R2 for BOE R2.
Also, your version of Enterprise has not been patched. You should have a Support contract which will allow you to get into our Gated site and update BOE. Then it may work but check with your administrators first before patching BOE.
Thank you
Don

I keep getting an error message that asks me to contact system administrator

when I try to reply to certain emails like Ebay I get an error message that says to contact my system administrator

I responded to you here > https://discussions.apple.com/message/22264383#22264383
Please do not start duplicate topics. Thank you

Get error messages for those procedures in some system tables

Hi expert,
when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
Many Thanks,

>
when I ran a procedure by schedule or on the front end. is there any approach to get error messages for those procedures in some system tables?
>
No - there is no system log table.
You need to create your own logging package and log table and modify your procedure code to call your own logging procedures to log into your own log table.
The procedures in the log package would typically be defined with PRAGMA AUTONOMOUS_TRANSACTION so that the exceptions get logged even if your procedure performs a ROLLBACK.
See AUTONOMOUS_TRANSACTION in the PL/SQL Language Reference
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/autotransaction_pragma.htm
Here is an Oracle-Base article that shows how to use the pragma to perform logging.
http://www.oracle-base.com/articles/misc/autonomous-transactions.php

I had the developer preview for IOS 6 on my phone, and just got a message telling me that my operating system is no longer active. How do I get my phone activated again?

I had the developer preview for IOS 6 on my phone, and just got a message telling me that my operating system is no longer active. How do I get my phone activated again?
I had the developer preview installed. Never had to update to the release version of the OS. Now, the preview has expired, and I cannot use my phone because my iTunes reads my OS as being current, but my iPhone cannot active. Any ideas on how to fix this issue?

If I Google for Michael Superczynski, first match tells "Michael Superczynski's Profile : Apple Support Communities". It in fact does a lot of work there even if not paid.
And yes we do not have disagreement about "official apple developers". Problem is that Apple screwed our devices because we are "official apple developers" and did effort to stop us getting proper help. I unbricked my ipad and iphone thanks to unofficial help. Thank you who wrote this unofficial help and "no thanks" for apple for ruining my access to my devices. My mistake was assuming that "update" button on my devices works. It did not because it always told "Your device has latest IOS6 installed" until it bricked yesterday.
If Apple does not want to listen us, continue do delete post, blame us installing your software and yes we stop buying your devices and developing for them.
Tonu

Mac Mail & POP Error Message - Unable to receive, Able to send

I am in a bind -- our company (okay, me) had gotten fed up using Yahoo Small Business email (multiple problems with customer service, they deleted my email, their tech fixes take weeks, I could go on and on...), so we switched to Network Solutions, a company I've used personally and been pretty happy with. HOWEVER, we've switched over and a remote party who uses Mac Mail to access his email set up using the exact settings suggested by Network Solutions and is unable to receive email. He's able to send it (using Earthlink as the outgoing mail server), but he's unable to receive it, and it's becoming a BIG pain.
He's running:
Mac OS 10.4.6
Mac Mail 2.0.7
He receives the error message:
"The server error encountered was: The server "mail.latitude-entertainment.com" cannot be contacted on port 110."
He operates wirelessly using a home router for multiple computers and has Earthlink DSL.
One bizarre twist: He's even not able to access the webpage for webmail (http://mail.latitude-entertainment.com)
At first I thought it was a firewall issue, but he doesn't believe he has any firewall software installed.
Needless to say, I'm an admin here looking like a fool in front of the big wigs. Not a good position. Network Solutions runs me down their usual list of things to look for, but not looking at the computer, I'm running blind (and he's not in a position to contact tech support himself).
Any help out there?
Any help would be appreciated.
Laptop, not sure what type Mac OS X (10.4.6) Mac Mail 2.0.7

Hello, and welcome to the Discussions.
Probably the number one thing check and/or experiement with, is the form of the Username entered in the Mail Preferences when setting up the account. Mail is very precise about whether the form is the portion of the email address in front of the "@domain", or the entire email address. The standard will be set by the server, of course, Mail will not take Username from any place, other than the Username entry box in the preference, and not from the email address entry box.
Have him try it each way. Do you access this server with Mail 2.0, or otherwise?
Ernie

Detecting and diverting error messages to diffierent receiver using BPM

HI Frndz,
I am working on BPM where i need to detect the message is in error or not, if is it is error it should divert to mail adapter otherwise it should go into idoc adapter(Succesful messages).
I think thorugh BPM we can achive this but i am struck at a point "how only the error messages will get diverted into the mail adapter" ........................
Points will be rewarded based on the solution provided........
Regards
Sai Ganesh

Hi Sai,
Create a Block and place your logic like
receive step to receive the message,
some operation as per your business logic.
send step to send this message to IDOC adapter.
Also create a exception branch in this block to capture if any error occured while processing a message. In the exception branch, insert a send step where you will be sending this error message to MAIL ADAPTER.
Hope this helps!!!
Chrish

ABAP errors messages stacking in BW

We have experimented with available message types to send errors while validating variable input. Type "I" seems to work the way we want it to; however, I had to change one of our standard web template settings to no longer suppress warnings (<param name="SUPPRESS_WARNINGS" value="X"/>). The messages are not coming thru but I am getting other warning that I do not want the users to see.
If we use Type "E", the error messages appear on a new screen correctly, use the back button to enter a new invalid value for the variable, receive a new error message. This messages is stacked under the previous message. If you use the back button again and enter a valid variable value, you go to the error screen again and see the previous messages but no new messages. It will not let you run the query with a valid value if you received an error to begin with. Seems like the buffer is not clearing or something.
Does anyone know how to clear out the errors or successfully use "E" so I don't get other system warnings that "I" sends thru?
Thank you!

Hi ,
Try actiavting all the related components of the FM.
Regards,
Aditya

NW ABAP - Error Message: Signal c00 received by operating system

Similar Messages

Maybe you are looking for