Part number ASY-47738-001 (back cover of phone)

I received my BB Curve today but the back cover does not close proper as it seems bent on the right side (if looking at the device from the front). I would want a replacement cover so does anyone know where I could order one. The part number on the plastic cover is ASY-47738-001.
Thanks.

No. Your iPhone is not fake, it just had the back cover replaced. You can go to Apple Store and buy a new back cover for $29, make Genius reservation so you do not have long wait time.

Similar Messages

What is the Part number for the plastic rear cover of Pavilion G70 ?

I send my notebook Pavilion G70 for manintenance and the tecnician lost its rear plastic (between the Display cover and the Base), so I want to know what is the part number and where can I bought it? I will be very grateful by any help because I could not find this part at HP site.

Hi Werlang,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Portege R705-P25 LCD Back Cover Assembly part number

Hi all,
I'm looking for the part number for the LCD Back Cover Assembly. The Cover hast the following code in it
GM902984813A-D
but I'm not able to find the right part for it. I tried to look for it in "National Parts Depot" but I need another part #, something like P000.....
The Laptop is the following:
Toshiba Portege R705-P25
Part #: PT314U-00U014
Serial #: XXXXXXXXX
and the LCD screen has the following part # in it:
NRL75-EE09916A 00625D1H 4771
Maybe one of you, or someone from Toshiba-Support can help.
Thank you
[Moderator edit to remove serial number.]

I'm sending you a PM with a little more information.
- Peter

Replacement for Part number: 431407-001 (HDD)

My hard drive crashed on my DV6000, the part number is 431407-001. Can I replace it with this one:
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4950132&csid=ITD&body=MAI...
It has a much larger capacity and is cheaper. It seems to eb the same physical size. Anything else I need to know before I roder it?
This question was solved.
View Solution.

Hi all,
I have the same problem but more than 1 year later... I need to buy another HD for my laptop HP Pavillion and the p/n concerning to the HP support is 431407-001. I don't know if I can use a bigger HD (about 320GB) or this part number is the bigger. It's only 120Gb. I've been looking at Seagate Momentus 5400.6 - 320 GB - 5400 - 8 MB - SATA-300 (ST9320325AS) but HP support says the supported model is the partnumber 431407-001.
Anybody has test another HD for this HP notebook? If you could tell me something more I'll be very happy.
Thanks a lot.

Part number hp compaq

Hi everybody!!i need your help guys with a problem .i need to know for what part number is 319947-001 for hp compaq notebook??thanks in advance

Hi, Click the below link to get more information http://partsurfer.hp.com/Search.aspx?SearchText=319947-001 Then Click Here to see the list of HP Products that Part Number 319947-001 is used in.

Compaq C700 cooling fan's part number?

Hi
I wonder if the cooling fan 438528-001 can be used on Compaq C700?
It does not show Compaq C700 is compatible with it on hp.com
But when I searched on ebay, many compaq c7800 cooling fans for sale have part number 438528-001:
http://shop.ebay.com/?_from=R40&_trksid=p3907.m570.l1313&_nkw=compaq+c700+fan&_sacat=See-All-Categor...
FYI on C700's service manual, the part number is 454944-001.
Could anyone pls clarify?
Thanks.

I had one of these units. It was a great machine but it was LOUD. The reason behind this was that the fans basically had one speed... FAST AND LOUD.
The latter units had variable speed fans and were a little more quieter.
It bothered me so much that I rigged the unit so the fans would only run at half the speed. It was useless though as the machine got pretty hot. Maybe if it was in an a/c data center it would be different.

HT3939 hi ! my iphone 5 doesnt have Model number on the back cover ! why ?

hi ! my iphone 5 doesnt have Model number on the back cover ! why ?

I'll tell you if you tell me what this has to do with iPhone in the Enterprise.

HT3939 HOw to know iphone model number if iphone is dead & its back cover was broken...

HOw to know iphone model number if iphone is dead & its back cover was broken...

contact apple.

I have a G61 511WM and came across a service guide Document Part Number: 573709-001 is this genuine

Compaq Presario CQ61 Notebook PC andHP G61 Notebook PC
Maintenance and Service Guide
Document Part Number: 573709-001
September 2009
I am trying to upgrade my notebook and all the specs are in here. I just don't want to invest unless I know this is the correct service guide.

You can look at this one for free and see if it does the trick for you:
Manual
And here is a copy of the one you asked about:
Manual
These are slightly different editions of the same thing. Just download and open with Adobe Reader and print. Don't pay for HP Manuals we can usually help you find them for free online somewhere. HP is one of the better OEMs as far as maintaining documentation, although they are far from perfect.

Hp g70 back cover replacement

i have a hp g70 here, and im about to replace the back cover, coz the other one broke, but you know the wireless antennas, the two that are on either side that are attached to these metal bits, it looks like they are soldered on, if thats the case, will i have to de solder them and solder them to the new back? thanks.

Hello Banhien, I checked that part number and I believe it's for a Compaq CQ10 Series, not for a dm1-3000.
http://www.getpartsonline.com/594808-001.html
I think this is the correct part number taken from the manual.
635302-001
http://h10032.www1.hp.com/ctg/Manual/c02666702.pdf Look on page 20.
@ taxo_bravo
Have a look at this link, I think this is the correct one.
http://www.pchub.com/uph/laptop/355-74898-20351/HP-Pavilion-dm1-3000-Series-LCD-Rear-Case.html
The photo is kind of dark, but if you enlarge it and look carefully it has this interlocking "circle" pattern on the back like your DM1.
I have used this source many times to order hard to find parts and they have been proven reliable.
HP Media Services Library to get it apart.
http://h20574.www2.hp.com/default.htm?lang=en&cc=US&hpappid=psml
Let me know if you need help with the library, also know that it's a big job to replace the back cover.
I also took it for granted that your model is actually a dm1-3121es and not a dm1-312es.
See below to the link which I think is your model.
http://h10025.www1.hp.com/ewfrf/wc/product?product=5076588&cc=us&dlc=en&lc=en&tool=

Need hard drive screw part number for T500 please

I want to buy a spare screw for the screw used to screw the hard drive cover to the base of my T500 notebook.
Where is it possible to find the part number so I can buy this??
What IS the part number/name I should use??
Perhaps someone knows the specific size/dimensions/etc. required to buy an off-the-shelf screw??
I tried calling support but there is no way to speak to a human to explain what I'm looking for, which is unusual and specific.
Thank you, Tom

Hi tlyczko,
The part number for the screw set is listed in the Hardware Maintenance Manual. You can buy them here.
Hope this helps, and come back and tell us how it goes!
I don't work for Lenovo. I'm a crazy volunteer!

Replace back cover

I need to replace the back cover of my iPad 2. There are several third parties that will do it for a reasonable price but the serial number changes and the warranty is voided. I would prefer to have Apple do it, but I am curious to know if the cost of repair is prohibitave, that is, if the cost is to high, should I just buy a new one and have my data transferred.

Talked to Apple support in the Apple store in Osaka. They do not offer repair service, however, they will let me trade in my damaged iPad for a new one for about 20,000 yen, about 250.00 USD. A bargain considering 3rd party repairs void the warrenty, plus shipping costs, insurance, etc. I have a good case for it now, but I will be looking for a better one. Thanks for yor input.

Mid-2010 MacBook Pro 15" 2.8 GHz Logic Board Part Number

Hi all,
I have been searching for a few hours trying to find the part number for the logic board one of my MBPs. I, unfortunately, have the Mid-2010 15" MBP with the bad GPU that results in endless kernel panics. (I also had the first Pentium chip, the pentium 60 with the floating point error in 1995 too). I upgraded the MBP to the 2.8 GHz, core i7 (2 core) processor when I ordered it in 2010.
Anyway, the apple tech guide exploded view does not show the part number for the 2.8 GHz. It only shows the part numbers for the other 3 configurations - 2.4, 2.53 and 2.66. I took the cover and discovered my my EEE code is "QAG".
I have just started trying to figure this issue out (too much time has passed and Apple will charge me to fix). I want to try and find a replacement logic board and do it myself. Does anyone have an idea what my part number is for the logic board? None of the sites I searched have a 2.8 GHz board listed just 2.66.
An alternative question - In my PC building days, some motherboards were compatible with multiple speeds of main processors. My computer model number
MC373LL/A
is the same as the 2.66GHz model. Does the 2.66 GHz logic board support the 2.8 core i7 too? I don't want to screw up and order the wrong part.
OSX Yosemite is installed.
Thanks,
Tony

http://www.powerbookmedic.com/MacBook-Pro-15-Unibody-28GHz-Core-i7-Logic-Board-p -36842.html

What's the part number/details for the AC Adapter for a HP G61-456EE Notebook PC?

I'm based in the UAE and I have a G61-456EE Notebook PC. I need to order a replacement AC Adapter since I've misplaced mine and I can't seem to find the specific model/part number in the HP Parts Store. Can someone please advise me on which particular adapter is required for my PC and the necessary instructions on ordering one?

here is the part # for your computer, choose from two, only diffrence is 90 watt and 65 watt and both can work for you.
463958-001 SPS-65W ADPTR,
463955-001 SPS-90W PFC ADPTR,
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Windows 7 64 Bit drivers for Toshiba Satellite C55-A5180 part number PSCJEU-00F001

Toshiba Satellite C55-A5180 part number PSCJEU-00F001
Drivers needed to install Windows 7 64 Bit on Satellite C55-A5180 part number PSCJEU-00F001
Edited to add new location for the video driver
Drivers where downloaded from here http://support.toshiba.com/support/modelHome?freeText=1200008363
And here
http://www.toshiba.eu/innovation/download_drivers_bios.jsp?service=EU&selCategory=2&selFamily=2&selS...
And here
http://support.toshiba.com/support/modelHome?freeText=1200007439
And Intel page here
Intel HD graphics driver http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
Toshiba Driver installation instructions
http://support1.toshiba-tro.de/tedd-files2/0/install-20140521160649.zip
Intel Chipset SW Installation Utility http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40216100a.exe
Intel Trusted Execution Engine Interface
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40215000b.exe
This post has the video driver - Here
Intel® Iris™ and HD graphics Driver 15.33.22.64.3621 for Windows* 7/8/8.1 64-bit
down the page you will find the driver - win64_153322.exe
Realtek Card Reader
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40217200c.exe
RealTek LAN Driver
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40215100c.exe
RealTek wireless LAN Driver
http://support.toshiba-tro.de/tools/eula/calleula.asp?ID=91194
USB3.0 Driver
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40219400c.exe
Synaptics TouchPad Driver
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc40213500e.exe
After installing I had to enter the file and run from setup.exe because it did not install from the Toshiba installer, it only unzipped the file and saved it.
You may want to try this older Synaptics touch Pad Driver
http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20130730102013.zip
Toshiba Value added Package
http://support1.toshiba-tro.de/tedd-files2/0/vap-20130916115251.zip
Toshiba Service Station
http://support1.toshiba-tro.de/tedd-files2/0/sest-20130730134053.zip
Toshiba PC Health Monitor
http://support1.toshiba-tro.de/tedd-files2/0/pchm-20130730130641.zip
Toshiba HDD/SDD Alert Utility
http://support1.toshiba-tro.de/tedd-files2/0/hdsdal-20130730121320.zip
Toshiba Peakshift Control
http://support1.toshiba-tro.de/tedd-files2/0/tpsctrl-20130916091602.zip
Toshiba HW setup (Hardware setup)
http://support1.toshiba-tro.de/tedd-files2/0/thws-20130916090522.zip
Toshiba Disc Creator
http://support1.toshiba-tro.de/tedd-files2/0/dcr-20130730110923.zip
Toshiba Web Camera Application works for windows 7 or 8
http://cdgenp01.csd.toshiba.com/content/support/downloads/TC30463200A.exe
Toshiba Video Player
http://cdgenp01.csd.toshiba.com/content/support/downloads/tc30647200a.exe
Toshiba recovery media creator
http://support1.toshiba-tro.de/tedd-files2/0/trmc-20130730133957.zip
All programs seam to work except HWsetup. Flashcards show up when using special function keys except for the volume, the volume special function keys work to turn volume up and down but you don’t see the flash cards, and of course there is no recovery partition so the recovery media creator cannot burn recovery media.
Updated to show instructions and pictures 8-24-2014
Instructions for changeing to from Windows 8 to windows 7.
INSTRUCTIONS:
First - Burn recovery media before you make any changes! -You may want or need to go back to windows 8 later-
Update BIOS to newest bios version, the C55 and possibly other models will not support CSM boot mode with the older bios versions.
Second -
Important Bios changes when changing from Windows 8 to Windows 7:
Completely shut down laptop (Shut down Windows 8 while pressing the Shift key to completely power off.) then restart computer and hold f2 when the screen goes black and wait for the bios setup utility to launch.
Select advanced, then system configuration, then boot mode
UEFI and CSM or legacy (UEFI for Windows 8 and CSM or legacy for windows 7)
For windows 7 change to CSM or Legacy mode.
Third - Also in bios setup utility select - Security, then Secure Boot, then you have to disable secure boot for windows 7.
You will need to delete all partitions before installing windows 7 this is done forth step.
Forth - Insert your windows 7 disc and select custom install, your partitions should show up - click on each one and below you will see advanced drive options, click that and you will have options to format - format each one, then delete each one. You will be left with one raw partition, select to install and windows will do the rest while installing the operating system.
Fifth - install drivers
Installation order is important:
Install chipset driver then video driver before other drivers. Then install Toshiba Value added package before other applications
-See attached pictures that show installed applications-
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****
Solved!
Go to Solution.
Attachments:
programs5.png ‏1040 KB
programs3.png ‏193 KB

That should work as well for all the models in part-number family PSCJEU. At least these, probably more..
    Satellite C55-A5104 (PSCJEU-00K00R)
    Satellite C55-A5105 (PSCJEU-00K018)
    Satellite C55-A5180 (PSCJEU-00F001)
    Satellite C55-A5190 (PSCJEU-00L001)
    Satellite C55-A5140 (PSCJEU-00K001)
    Satellite C55-A5137 (PSCJEU-036012)
    Satellite C55T-A5123 (PSCJEU-01G00Q)
-Jerry

Part number ASY-47738-001 (back cover of phone)

Similar Messages

Maybe you are looking for