Partial Quantity and Line item not showing in MIGO
HI All,
My User create STO and after save it is automatically created OBD and PGI through BARCODE now problem is at the time MIGO it is take partially quantity.when i going to do manually rest quantity it is not showing all line items.
Issue 1. It is showing only one line item instead of two line item Qty.
2. When i am going to select purchaseorder at migo instead of OBD its showing two line item.
Please suggest what to do.
HI Please check i am sending screen shot
Similar Messages
-
MIGO-sales order number and line item not validated for 501E mvt in MIGO.
Hi All,
In MIGO i am trying to post for 501E(specisl stock=order on hand) movement type, here i am entering the material and in the where TAb even if I enter wrong sales order number or wrong sales order line item number. the system allows to post .
its not validating the material against the sales order number and line item number that is entered to check whether that material really exists in that particular sales order or not.
is there a way to fix this?
Thanks
Mahendrahi
i dont think vvalidation is possibel
as the system dont know whaich material is assigned to which SO
as we r takeing the stock without PO
if u want to validate then system can validate the quantity that is also with use of some user exit
correct me if i am wrong -
In vendor line item not showing withholding tax amount and withholding base
Hi Gurus,
When i am using T,code FBL1n for details clear item,in line item doesn't showing withholding tax amount and withholding base amount for some vendors when i am using FB03 there showing tax amount and base amount,in option is there.plz help me,its very urgent.
Thanks & regards,
Dharma.Im not sure but may be its because in the config. of 1099 Withholding tax we usually say that the with holding is to be posted only after payment of the open items.
So, lets try this. Look at if the documents which are showing withhld tax in FBL1N if they are paid or not.
this would give us some help or hopefully the answer..
regards -
Cost element and Line item reports show different actual costs
Hi PS experts,
My client has an issue pertaining to actual cost reports. The cost element report shows actual costs $42,000 for one WBS and when I double click to see details the value it shows is $2100. Even when I checked line item report for this WBS the value is $2100. What could be the reason for getting different values? If some one throw some light on this it would be great helpful to me
Regards,
LaxminarsimhaLaxminarsimha
The values in CJI3 should be correct and will include all postings (e.g. Settlement values) and possibly Actual Revenues unless a filter is in place - so take this as being your correct figure to start with.
Your drilldown will show the same value as CJI3 because it is CJI3
Any cost element report you are using is probably correct for what you are asking - is this a Standard Cost Element Report you are using or is it bespoke
One thing to be careful of when you drilldown on Cost Element Reports is that you do not always get the a make up of the value you have drilled down
e.g.
Cost Element Report was run for Period 1 to 6 2008 and shows £100.00
You drilldown and sometimes the drilldown automatically shows ALL line items e.g £500.00 (not just the values for periods 1 to 6 of 2008 which you may expect £100.00)
In the past I've removed the drilldown capability from bespoke cost element reports to prevent drilldown to the line item report (which is CJI3) because of this problem.
Usually where values for a a number of periods only (not total costs) was required
Other factors to consider
Revenues/Settlements may be excluded from Cost Element Report but will not be excluded from CJI3 unless you specifically restrict
You need to identify which types are postings are missing from the Cost Element Report (what is common...cost element, dr/cr indicator, business transaction)
I've also hit the mistake in the past where I've asked for periods 1 2007 to period 3 2008 and instead of giving me just over a years worth of actual it gave me actuals for periods 1 to 3 for 2007 and 1 to 3 for 2008.
Hope this helps
Steve -
GL line item not show reverse indicator
Hi Guru !
I have problem about GL account that assign account management to be line item so when post entry and reverse entry by use this GL account ,when I see report on t.code FBL3N-GL line item ,they did not show indicator of reverse entry so it difficult to check so I would like this report to reverse indicator or there are some report that can show it . thank you very much.
BlueskyHi,
Please check the document type which is used for posting the document. For the document type, the check "Negative posting Allowed" might have been ticked. as a result new line item is not posted. The original line item itself is reversed. May be this is the reason why you are not getting the reversal document.
Thanks,
Aman -
GL Line item not show reverse document
Hi Guru !
I have problem about GL account that assign account management to be line item so when post entry and reverse entry by use this GL account ,when I see report on t.code FBL3N-GL line item ,they did not show indicator of reverse entry so it difficult to check so I would like this report to reverse indicator or there are some report that can show it . thank you very much.
BlueskyHi,
Check the Layout of FBL3N Report
1. Change Layout Ctrl+F8)
2. Add the Reversal Indicator field
3. Save the Lay out settings
Check the Reversal Indicator. If any Key is there It means Reversal document.
Hope. Your problem solved.
Regards,
Kishore K -
Hi,
In ML81N, there are 7 line items showing against 1 Purchase Order. and when we saw in MB02, then only 1 line item shows.
How it's possible that in ML81N showing 7 line items but not showing in MB02.
please clear...Hi,
it might be that all services you see in ml81n are considered in one item in the PO.
did you check that?
regards, Paul. -
Line item not showing in delivery
Hi all,
I created sale order with 21 line item, but in vl01n showing only 11 line item.
can any one tell me, why only 11 line item showing in delivery ?
thanks.Hi
If you have created sales order for 21 line items and in delivery there are only 11 line items are copied then while in the delivery creation from the initial screen there could have been FROM and TO mentioned
If your answer is no for this then in the delivery overview screen there will be a message check the nodes in the log
Have you checked that?
The system will itself tell why?
From the top menu bar-edit--error log
Regards
Raja -
Variance Line items not showing in KOB3 - Previous Orders.
Hello CO Experts,
Because of not selecting 'Write Line items' check box in Variance key (OKV1), KOB3 is not showing any line items even though variance posting exist.
After selecting 'Write Line items' check box in Variance key (OKV1), any variance posting there on will be recorded to display as line items in KOB3.
But my question is how to make this line item display effective for variances posted before selecting 'Write Line items' check box in Variance key (OKV1).
Thanks in Advance
-SahasHello Declan,
thank you for confirmaiton.
I think SAP would have provided some solution (may be a program) to make this line item display effective for variances posted before selecting 'Write Line items' check box in Variance key (OKV1).
-Regards
Sahas -
IPhone 5 sending all "Sent Emails" to "Trash" Folder and deleted items not showing up at all
My boss has an iPhone 5 and today she realized that trash folder only has the last 50 emails that she has sent.
The trash folder is empty.
We use gmail. Her outlook is fine and the web interface is fine. She's tried restarting her phone. Will we have to delete the account and resync? (please say no...)
Thanks!Dear Mr. Rakesh Vijayan,
What is your justification for below behavior?
Using basic Gapps (free) email server,IMAP option client with MSO2013. Window 7 professional
MO Professional Plus,
(15.0.4535.1006), MSO(15.0.4535.1507)32-bit.
Auto migrated/upgraded from MS2007 to MS2013 in March, 2013.
Inbox repair tools has been run 03 times since last 6 months in safe mode..
Already configured Settings> advanced and deselect "Do not save copies of sent items
Already configured File > Account Setting > double-click your IMAP account and adjust "Mail to keep offline" to "All".
Since March 2013, 95% mails are getting saved/appearing in Sent Items folder. Only some times few mails are not appearing in sent item outlook client folder.
All those emails are also appearing in All mail Folders.
Any email sent from Gapps web interface/browser definitely getting save/ appearing in sent item outlook client folder.
But now since last 4 days no email sent using outlook are appearing in sent items folder.
Sincerely Yours
Kranti Mohan | Head-Corporate Sales, Mkt. & Development |
GPS Address:30.725144N,76.765755E
Maya Hotels|SCO 325-328 | Himalaya Marg | Sector-35B | Chandigarh-160022, India.
T: +91(0172) 4688774x (D)/4688700x174 | M: +91 (0) 9915707030 | F: +91 (0172) 2660555
[email protected] | http://www.mayahotels.in
http://www.facebook.com/mayahotel | http://www.youtube.com/user/mayahotels
http://twitter.com/mayahotels | https://www.orkut.co.in/Main#Community?cmm=101119348 -
Sent and Deleted items not showing up
I'm not able to see sent or deleted items in outlook. I am not using a ost and if I log onto OWA I can see both.
Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Sales order some line items are showing not relavant
Hi SD Guys,
In sales order some line items are showing not relavant.
Why are they showing a status of not complete or "not relevant"?
Thanks
SunnyHi sunny,
plz check the each line item in the sales order controls by the item category, so check the item category , depends on the item category, pricing,delivery and billing takes place.
regards,
ram. -
I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line. It is not my home page. Help!!!
See also:
*https://support.mozilla.com/kb/Removing+the+Search+Helper+Extension+and+Bing+Bar
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Resetting_preferences -
GL Custom Reports not displaying source and line item Data after Upgrade
Hi,
I am having this issue even though General Ledger Journal Entry Summarization is set to "No Summarization" and in SLA the Line Type is set in detail for Transfer to GL. Have you come accross a specfic example like this? Can you please guide me to what the problem may be?
None of the GL reports is showing the Source and Line Item details.
Thanks,
ArunI am having this issue even though General Ledger Journal Entry Summarization is set to "No Summarization" and in SLA the Line Type is set in detail for Transfer to GL. Have you come accross a specfic example like this? Can you please guide me to what the problem may be?
None of the GL reports is showing the Source and Line Item details.Have you verified the queries of those reports after the upgrade? And, when you say upgrade, do you mean from 11i to R12?
Did you set the application context properly?
How to set the Organization Context in R12? [ID 437119.1]
Oracle Applications Multiple Organizations Access Control for Custom Code [ID 420787.1]
SQL Queries and Multi-Org Architecture in Release 12 [ID 462383.1]
Setting APPS Context is mandatory step while loading data using public APIs [ID 473615.1]
Thanks,
Hussein -
Dear All,
I have facing one issue at the time posting in MIRO.
I post one of migo doc in date 03/01/2010 , the entry is:( with same material )
Post key description amt curr.( USD)
89 Stk.RM -IMP 32100.00
96 PL.VND.RM.IMP GR/IR 32100.00
40 Purchase RM-IMP 32100.00
50 Purchase offset. 32100.00
And Miro Posting on date 23/03/2010
Post key description amt curr.( USD)
31 xyz Vendor 32100.00
86 PL.VND.RM.IMP GR/IR 32100.oo
89 Stk.RM -IMP -
40 Purchase RM-IMP -
50 Purchase offset. -
But when I post for another po in migo on date 03/01/2010
Post key description amt curr.( USD)
89 Stk.RM -IMP 76800.00
96 PL.VND.RM.IMP GR/IR 76800.00
40 Purchase RM-IMP 76800.00
50 Purchase offset. 76800.00
and miro posting on date 19/02/2010
Post key description amt curr.( USD)
32 yz Vendor 76800.00
86 PL.VND.RM.IMP GR/IR 76800.00
89 Stk.RM -IMP Line item not generated
40 Purchase RM-IMP Line item not generated
50 Purchase offset. Line item not generated
Can any one tell why line item not generated for miro posting .
Regards
MilindHi,
The extra line items will be generated when there are any exchange rate diffrences are there then only shows.
Other wise it wont show those extra line items
Please check group currency , global currency etc. for your extra line items
Maybe you are looking for
-
Hello, I don't think it is possible, but my goal is to start a discussion about content libraries and maybe suggest something for a future release or version of Configuration Manager. Actually, based on Configuration Manager Technet documentation, Co
-
How do I transfer photos from my external HD to my new MacBook Pro?
I can't find the photos in my HD but I used Time Machine so they have to be there somewhere... All I can find is under Users --> Pictures --> iPhoto Library, which I can't upload/import into my new iPhoto. (I used to use a regular MacBook and now I'm
-
I need to update from version 4.3.5. And i cant seem to find a link on app store or on apple website ....do i need a computer to do so or can i do so wirelessly from my ipad2 if so how?
-
Integrating the OM infotypes in the Column area in PPOME Screen
I am trying to integrate om Infotypes itno the column Configuraton area in the Screen PPOME and going through the Hierarchy Framework-Column Framework Tables T77ARRAYTP T77ACOLC T77COL T77FRIEND and after doing a ton of changes nothing changes i
-
Configuring multiple chassis in MAX
I am looking for some help/documentation on how to configure two chassis in MAX?