Integrating the OM infotypes in the Column area in PPOME Screen

I am trying to integrate om Infotypes itno the column Configuraton area in the Screen PPOME and going through the Hierarchy Framework-Column Framework
Tables
T77ARRAYTP
T77ACOLC
T77COL
T77FRIEND
and after doing a ton of changes nothing changes in the Column framework.Does anybody have an idea

Dear Praneeth,
Thanks for your response. Yes I am aware of the above threads.
I will explain my exact requirement here:
We have created 5 Custom Objects (For Eg. 1,2,3,4 & 5). This newly created Custom Objects has an Allowed Relationship A/B 003 with the Object Org Unit.
For Eg : I have Created Org Unit and related those Custom Objects (1,2,3,4 & 5) using A/B 003 Relationship through Expert Mode.
However, I do agree we could not able to view through PPOME/PPOSE Screen since it is Custom Object.
In this case, I will create a Custom Infotype where i will be maintaining those Objects relationship against the particular Org Unit. Later I shall add it as Tab Page in the Detail Area.
My question is it possible to do as I mentioned above?
Apart from the above, please suggest can we able to add IT1001 Infotype as a Tab Page in the details area through configuration?
Regards,
Manikandan N

Similar Messages

How to add org infotypes to the PA infotypes in the ad-hoc report infoset?

HI experts,
We created a new object in OM. I want to get the holder of the position using the following linkage. Please explain. e.g. Z1 (new object)>> using new relationship ZR >> position >> rel. A008(holder) >> holder Pernr.
Is it possible to get it in one shot.
Please explain..
Thanks,
Rashmi

Hi,
Check table - T778O or node : Personnel Management > Organizational Management>Basic Settings>Data Model Enhancement > Maintain Object Types
Maintain Relationship:
Personnel Management > Organizational Management>Basic Settings>Data Model Enhancement > Relationship Maintenance > Maintain Relationships
Go to PO13 to assign relationship to position to person.
All the best, if it resolves your problem, close this window by following process of awarding points.
Regards
Santosh

Displaying Custom Infotype in the Overview Section of LSO_PV10 and LSO_PV1A

Dear experts,
We would like to display the custom IT in the Overview Section of Create Course Run (LSO_PV10) and Change Course Run (LSO_PV1A) screen. User currently can create and edit some standard ITs from this overview section.
Currently, the custom IT has been built and configured to Object Course (E). It can be displayed from PP01 when choosing Object E.
How can we display the custom infotype to the standard Create Course Run (LSO_PV10) / Change Course Run screen (LSO_PV1A) Overview area?
Many Thanks!
Regards,
Ripin

Hai,
I also faced your problem. I created business event. but when i am checking the business event, but results nil. But system is showing no. for that it is not showing object and relation.
For that i create again object and realationships for that event. Automatically, system overlap that event.
it it is helpful or not, i don't know. If it is helpful , do like that way.
Thanks

Infotypes at the field level

Hi
Can anyone provide me the detail description on the following infotypes at the field level, as in , which all fields are present in these infotypes in SAP standard :
1. 0006 (Addresses) - Subtype Permanent residence
 Subtype Temporary residence
2. 0022 (Education)
3. 0024 (Qualification)

Hi Reema,
 You simple goto the TCODE SE 11 and give the table names as PA0006 for Address, PA0022 for Education and PA0024 for Qualification.
simple look the fields under this .INCLUDE PS0006 (Structure) for Address ..,
for each and every field SAP has provided the Description. you will get the required information.
Regards,
Narendra.

Add the custom infotype in Fast entry screen

Dear All,
I add the one new created the custom infotype in the fast entry screen but when am going to create the entry threw pa70 transaction in that case my table control which is been in that infotype is not in editable mode means it's only display mode ..
Kindly help me to fix this issueees.
thanks
Regards
Sandeep Dabral

Hi Sandeep,
Can you share the steps to create fast entry screen to custom infotype? Also is it possible to create custom TCODE to access this instead of PA70?

How do i generate the idoc for the custom infotype?

Hi Experts,
I have a requirement to create the custom infotype and generate the idoc for the custom infotype
whenever the user change or crate the data by PA30, PA40 transaction .
so please give some help to write a logic for generate the idoc?
Thanks in advance.
Venkat

I have just found out from the Archives, it is not possible to generate a formula line (trend line) in Numbers_08.
I am currently upgrading to Numbers_09.

Q_1 - Q_2 DataLink. Q_2 columns are not apperaing in Generate to file - XML

Dear experts i have developed a report in 6i against Oracle Applications 11i, Purchasing Module ...... I have two Queries in DataModel Q_1<->Q_2 with DataLink. The only problem is Q_2 columns are not appearing in Generate to file -> XML.
I developed similar style report against scott/tiger tables and Q_2 columns are appearing in XML. their are no wrong settings like "Exclude from XML output"
Generate to file -> delimited, html, pdf etc are working OK for both APPS and Scott RDFs.
Does this have something to do with what is mentioned here (though for 10g, point 17.1.4) ...
http://web.deu.edu.tr/oracle/B14099_16/aix.1012/relnotes.1012/relnotes/reports.htm
QUOTE
17.1.4 Limitation on Linked Queries for DelimitedData Output
DelimitedData output does not allow multiple queries to be linked to the main query, because sibling groups are not supported.
For example:
Case 1: You have a link between Q1 and Q2, a link between Q2 and Q3, and a standalone Q4
query.
Q1<-->Q2<-->Q3 Q4
In this case, DelimitedData output is generated correctly.
Case 2: You have a link between Q1 and Q2, a link between Q2 and Q3, and a link between Q4 and Q1.
Q1<-->Q2<-->Q3 Q1<-->Q4
In this case, DelimitedData output is not generated correctly. Alternatively, you can use XML output.
Thank you
Edited by: user473160 on Jun 3, 2009 12:05 PM

Hi,
no, the mentioned delimited text restrictions do not apply to XML-output...
Hm, try to take your report and use the wizard to generate a paper layout to see if the data is really "appearing" due to your data model.
Maybe there is some problem in the data link... e.g. number to character conversion in the datatypes that causes the problem...
Cheers,
Jens Rettig

Multiple columns are specified in an aggregated expression containing an outer reference...

Hi guys, probably I am still sleeping, but why in the first select I retrieve 0 as bb and in the second I retrieve
Multiple columns are specified in an aggregated expression containing an outer reference. If an expression being aggregated contains an outer reference, then that outer reference must be the only column referenced in the expression.
create table car (N_state varchar(20), city varchar (20), cars int) insert into car values('California', 'Los Angeles',1000), ('Ohio', 'Columbus', 300), ('Texas', 'Austin',400), ('Florida', 'Miami',800), ('Florida', 'Orlando',200)
with cte as ( select *, (select sum(cars) from car) as bb from car) select *, cars, bb, cars/bb as cc from cte
select *, (select sum(case when c1.N_state=c2.N_state then cars else 0 end) from car c2) as bb from car c1
Many Thanks

The 0s are due to implicit conversion as operands are of type int
Modifying it as below will wok fine
;with cte as ( select *, (select sum(cars) from car) as bb
from car) select *, cars, bb, cars*1.0/bb as cc from cte
Now for second part you need to write query as below
select *, sum(cars) over (partition by N_state) as bb from car c1
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

I changed something with my page, and now I have to move my cursor all the way up to the top to get the home, bookmarks or closing button

the URL line is also hidden until I scroll all the way up.

Sounds like you are in Full Screen Mode.
*F11 will toggle Full Screen Mode on or off.
*Another way to exit Full Screen Mode, when moving your cursor to the top of the screen, the toolbars will "slide" down; move your cursor onto a blank spot on one of the toolbars, right-click and click "Exit Full Screen Mode".
 
 
'''You need to update the following:'''
*Adobe PDF Plug-In For Firefox and Netscape
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.

When inserting 3 column details in a single table using Stored Procedure.Only 1 Column details getting inserted.Other 2 Column details are not getting into the table.Please see the below script and help me to change.

From the Parent Table i need to insert rows which are all under this column {(TradeIn_1_VIN),(TradeIn_2_VIN),(TradeIn_3_VIN) } into SALES_TRADEIN Table .
I have used the below Query,
But it reads only (TradeIn _1_Vin) Column in the SALES_TRADEIN table rest 2 records got skipped..
INSERT INTO SALES_TRADEIN
SalesID,
TradeIn_VIN,
TradeIn_Make,
TradeIn_Model,
TradeIn_ExteriorColor,
TradeIn_Year,
TradeIn_Mileage,
TradeIn_Gross,
TradeIn_Payoff,
TradeIn_ACV,
TradeIn_InteriorColor
VALUES
@SalesID,
case when @TradeIn_1_VIN is null then @TradeIn_2_VIN else @TradeIn_1_VIN end,
case when @TradeIn_1_Make is null then @TradeIn_2_Make else @TradeIn_1_Make end,
case when @TradeIn_1_Model is null then @TradeIn_2_Model else @TradeIn_1_Model end,
case when @TradeIn_1_ExteriorColor is null then @TradeIn_2_ExteriorColor else @TradeIn_1_ExteriorColor end,
case when @TradeIn_1_Year is null then @TradeIn_2_Year else @TradeIn_1_Year end,
case when @TradeIn_1_Mileage is null then @TradeIn_2_Mileage else @TradeIn_1_Mileage end,
case when @TradeIn_1_Gross is null then @TradeIn_2_Gross else @TradeIn_1_Gross end,
case when @TradeIn_1_Payoff is null then @TradeIn_2_Payoff else @TradeIn_1_Payoff end,
case when @TradeIn_1_ACV is null then @TradeIn_2_ACV else @TradeIn_1_ACV end,
case when @TradeIn_1_InteriorColor is null then @TradeIn_2_InteriorColor else @TradeIn_1_InteriorColor end
END TRY
Actually my problem is
If [(TradeIn_1_VIN),(TradeIn_2_VIN),(TradeIn_3_VIN)] these 3 columns have details i need all the 3 columns details need to be read to SALES_TRADEIN table.
Suppose if we have data only in [(TradeIn_1_VIN),(TradeIn_2_VIN)] then these column details need to loaded in the SALES_TRADEIN table.
If any columns are blank no problem it can move next process.
Please help me change those particular lines to insert all the 3 records (TradeIn_1_VIN) (TradeIn_2_VIN) (TradeIn_3_VIN) in to the table.

From SQL2008 on, besides INSERT-SELECT, and INSERT-EXEC, the INSERT-VALUES form of the insert command is improved. It can insert multiple rows like this:
INSERT INTO my_table(MyColA, MyColB)
VALUES
(1, 1),
(2, 2),
(3, 3)
You could also use that in SELECTs, like this:
SELECT *
FROM
( VALUES (1,2), (3,4)
) t(a, b)

None of the fact sources for [column] are compatible with the detail filter

Hi Experts,
I am using obiee 11.1.1.7.
Getting below error when i add a filter of non conformed dimension column.
Below is the error
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14023] None of the fact sources for [column] are compatible with the detail filter
Please help in solving an issue.
Regards,
NN

Hi NN
You need to follow steps in below link to model your BMM layer for the report to work with non confirmed dimensions.
http://obibb.wordpress.com/2010/05/31/multiple-fact-reporting-on-non-conforming-dimensions/
Once you have followed these steps you can use the non confirmed dimension in the reports.When you see the logs to see the query generated by obiee,it generated 2 queries 1 with confirmed dimension and other with non conformed dimension.When you filter using non confirmed dimension you will now not notice any error but the results will not be filtering out because the filter will be applied only in 1 query which is valid
Now for this to work what you can do is ,instead of using the filter drag the column you like to filter as a prompt in your view.default it to the value you need using the case statement and hide it.This is one of the work around.
There may be many other work arounds for this but you need to understand that for you requirment to work you need to tweek OBIEE to generate 1 query instead of 2 queries.

Columns are not displaying in a Dimension in the presentation layer

Hi All,
I have a Dimension in one of the subject area which has 3 columns. It was working fine but yesterday, we have an issue about this. These columns are not displaying anymore in the dimension.
I have checked in the Repository and from the Presentation services for the permissions and they look fine. Is there anything else am missing. If so, where I need to check.
Kindly help me on this.
Thanks,
Imtiaz.

Hi,
Check three things.
1. Try to login Admin user and check whether those columns are present or not.
2. Try to login different browser.
3. Cross check privileges for login user (what role has assigned ).
Note: Clear the browser cache and all Bi server cache and check.
Hope this help's
Thanks,
Satya Ranki redddy

There are fewer columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement.

I have been looking at my code for hours now and cant figure out what is wrong. The error has kept popping up even when i thought i had fixed everything. maybe a second set of eyes could help me out here. If you could help me out it would be much appreciated.
USE [ConorsSetKits]
GO
CREATE TABLE Customers (
CustomerID Int NOT NULL IDENTITY(1000,1),
LastName NChar(30) NOT NULL,
FirstName NChar(30) NOT NULL,
Address NChar(50) NOT NULL,
City NChar(30) NOT NULL,
State NChar(2) NOT NULL,
Zip Numeric(5) NOT NULL,
Email NVarChar(50) NOT NULL,
DateOfBirth Numeric (4) NOT NULL,
CONSTRAINT CustomersPK PRIMARY KEY(CustomerID),
CONSTRAINT ValidZip
CHECK ( [Zip] LIKE '[0-9][0-9][0-9][0-9][0-9]' ),
CONSTRAINT ValidState
CHECK( LEN([State]) = 2),
CONSTRAINT DateOfBirth
CHECK ([DateOfBirth] BETWEEN '1920-01-01' AND getdate() - 5844));
CREATE TABLE Sets (
SetID Int NOT NULL IDENTITY(1000,1) Primary Key,
SetName NChar(20) NOT NULL,
SetType NChar (20) NOT NULL,
Price Numeric (20) NOT NULL,
Quantity Numeric (50) NOT NULL,
CONSTRAINT SetTypeCheck
CHECK (SetType IN ('Planes','Tanks','Robots','Cars','Helicopters','Boats','Trains','Motorcycles','Jets')),
CONSTRAINT ValidQuantity
CHECK (Quantity >= 0)
CREATE TABLE Orders (
OrderID Int NOT NULL IDENTITY(1000,1),
CustomerID Int NOT NULL,
OrderDate Date NOT NULL,
CONSTRAINT CAIntPK PRIMARY KEY(OrderID, CustomerID),
SET IDENTITY_INSERT dbo.CUSTOMER OFF
SET IDENTITY_INSERT dbo.Sets OFF
SET IDENTITY_INSERT dbo.Orders OFF
SET IDENTITY_INSERT dbo.CUSTOMER ON
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1000, 'Janes', 'Jeffrey', '123 W. Elm St', 'Renton', 'WA', '98055',
'[email protected]',1985);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1001, 'Smith', 'David', '813 Tumbleweed Lane', 'Loveland', 'CO', '81201',
'[email protected]',1992);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1015, 'Twilight', 'Tiffany', '88 1st Avenue', 'Langley', 'WA', '98260',
'[email protected]',1972);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1033, 'Smathers', 'Fred', '10899 88th Ave', 'Bainbridge Island', 'WA', '98110',
'[email protected]',1980);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1034, 'Frederickson', 'Mary Beth', '25 South Lafayette', 'Denver', 'CO', '80201',
'[email protected]',1970);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1036, 'Warning', 'Selma', '205 Burnaby', 'Vancouver', 'BC', '80201',
'[email protected]',1981);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1037, 'Wu', 'Susan', '105 Locust Ave', 'Atlanta', 'GA', '30322',
'404', '653-3465', '[email protected]',1971);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1040, 'Gray', 'Donald','55 Bodega Ave', 'Bodega Bay', 'CA', '94923',
'[email protected]',1985);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1041, 'Johnson', 'Lynda', '117 C Street', 'Washington', 'DC', '20003',
'[email protected]',1969);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1051, 'Wilkens', 'Chris', '87 Highland Drive', 'Olympia', 'WA', '98508',
'[email protected]',1994);
SET IDENTITY_INSERT dbo.CUSTOMER OFF
SET IDENTITY_INSERT dbo.Sets ON
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1000, 'MysterySet1','Planes',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1001, 'MysterySet2','Planes',$19.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1002, 'MysterySet4','Tanks',$39.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1003, 'MysterySet3','Robots',$19.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1004, 'MysterySet5','Cars',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1005, 'MysterySet6','Boats',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1006, 'MysterySet7','Trains',$39.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1007, 'MysterySet8','Motorcycles',$9.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1008, 'MysterySet9','Helicopters',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1009, 'MysterySet10','Jets',$29.99,10);
SET IDENTITY_INSERT dbo.Sets OFF
SET IDENTITY_INSERT dbo.Orders ON
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1000, '2012-12-12');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1000, '2013-12-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1005, '2013-08-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2013-12-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2013-08-31');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2014-03-25');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1002, '2012-11-14');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1001, '2012-11-14');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1001, '2013-01-05');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1006, '2012-06-22');
SET IDENTITY_INSERT dbo.Orders OFF

Price Numeric (20) NOT NULL,
I do not think you understand this datatype? Go look at the values you are attempting to insert into this column. For example, "$29.99". After the insert, what value is actually stored in that column?
DateOfBirth Numeric (4) NOT NULL,
No. Just No. Either change the column name to faithfully represent what values you intend to store (and apply the appropriate constraints) or change the datatype and the values that you intend to store to match the column name. And the constraint
that you do have:
CONSTRAINT DateOfBirth
CHECK ([DateOfBirth] BETWEEN '1920-01-01' AND getdate() - 5844));
is both logically suspect and syntactically wrong. First, the upper boundary will be computed as 1999-04-29 15:50:21.670. But, of course, your column is a whole number of no more than 4 digits. The same issue applies to your lower boundary.
A simple select statement will show you those errors
select cast('1920-01-01' as numeric(4)), getdate() - 5844, cast(getdate() - 5844 as numeric(4));
An insert statement fails with the same error. Because, of course, your boundary values must actually be converted to numeric(4) in order to compare them against the value contained in the column. Generally, you can convert from
string to numeric - IF the content of the string actually contains a value that is numeric and can be converted into the specific type needed. Not so in this case. Is this 16 year period (5844 days) significant for some reason? You should
document it here in your DDL with a comment, because it is unlikely to be documented (and kept current) anywhere else.
And lastly, your script has:
SET IDENTITY_INSERT dbo.CUSTOMER OFF
That is not the name of your table, and therefore that statement also fails. The table name you used is plural.

DBMS_CDC find only the columns that are changed along with the primary key in the table

Hello,
We are having a requirement to find the change data in the production environment.
We are planning to use the DBMS_CDC utility.
But for example in the create change table 1 picked emp_id,ename, address, salary,dob.
I have a sample data of
empid
ename
address
salary
DOB
1
test1
24 test street
2000
20-Jan-98
2
test2
25 test street
2500
15-Aug-97
if ename for empid 1 is changed to test1_test3 from test1.
My CDC is capturing the values in the old and new values in the 5 columns.
But i need to get only the empid (primary key of the source table) and the ename column as only that's been updated not the rest of the 3 columns.
Can i accomplish this.
Please advice.

Hello,
Thanks for the information.
but if i change the change table then i will miss the other columns right?
I want to get the columns( empid and ename) only if ename is changed. i.e when ever any column in emp table changes i need to get all the columns where the data is changed along with the primary key columns empid.
Is there any way i can tweak the parameters so that i can achieve this or is there any other way using the cdc i can get this data.
Thanks

0315 infotype error when we are updating the cost center

Hi Experts
for one employee when i am going to change the cost center in 0315 infotype it is giving the error like
cost center does not exist in CSKS . but i checke in CSKS table it is availble in CSKS
but i noticed one point in this t-code for last costcenter , controlling area is not availble.
is this the cause for error.
Plz advise.
Thanks

Hi,
If you are checking the cost center by querying on CSKS table, The cost center should be of length 10.
You need to append Zeros to the cost center in the front to make the length as 10 and pass it to CSKS table.
Use the FM CONVERSION_EXIT_ALPHA_INPUT to input zeros in the front.
Thanks,
Sowmya

Integrating the OM infotypes in the Column area in PPOME Screen

Similar Messages

Maybe you are looking for