Partition with OS 9 and 10

I'm putting a new hard drive in my G4 Tower and I want to partition the drive. On part of the drive I want to put 10.4 on it and on the other half 9.2. I know I have to startup from a cd to partition the drive. Now when I reformat the drive to partition it what format should I use that works for 9.2 and 10.4? Mac OS Extended (Journaled), Right?

You are on the right track. I have OS 9.2.2 & OS X on separate partitions. You could initially install the new drive as a Slave with your current drive as a Master. Then using the Restore function of Disk Utility, transfer the files on your current drive to the new drive. Then you should rejumper the new drive to Master & old drive to Slave. The Master will now be your main drive & the Slave can be a backup drive.
Cheers, Tom

Similar Messages

  • I deleted my Boot Camp partition with Disk Utility and now I cannot reclaim the freespace?

    I deleted my Boot Camp partition with Disk Utility and now I cannot reclaim the freespace?
    And when I try to add a partition to the free space, and try to apply I do this:
    I press apply and it does its thing for like a second, I switch tabs and I get this:
    No matter how many times I reboot it doesn't work. Please help

    diskutil list:
    diskutil mergePartitions:

  • Can't boot into Windows after splitting Mac partition with Disk Utility

    Hi everyone,
    I installed Windows 8 with BOOTCAMP, creating a large 871 GB partition with a smaller 127 GB partition for Windows. After installing Windows, I then went back to Disk Utility to shrink the Mac partition and add two new partitions, one for storage and another blank, hoping to use it to install Linux into one day.
    I did that, and now Windows doesn't boot. A Windows blue screen tells me I need to use the Windows DVD to repair it.
    I tried to use Disk Utility to delete the two new partitions I made and grow the Mac partition back to the max size of 871 GB. But it doesn't let me do this. The Disk Utility log doesn't report an error and thinks it worked but the partition stays the same size. However if I make the partition a little smaller, like 870 GB then it works. I'm wondering if the Recovery partition is hiding there and preventing me from fully expanding the Mac partition.
    What can I do?
    Here's what I get if I type in sudo gpt -r -vv show disk0:
    Code: 
    gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168 gpt show: disk0: Suspicious MBR at sector 0 gpt show: disk0: Pri GPT at sector 1 gpt show: disk0: Sec GPT at sector 1953525167 start        size  index  contents 0           1         MBR 1           1         Pri GPT header 2          32         Pri GPT table 34           6 40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B 409640  1701278816      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC 1701688456     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC 1702957992     1846360 1704804352   248002560      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 1952806912      718223 1953525135          32         Sec GPT table 1953525167           1         Sec GPT header
    Here's what I get if I type sudo fdisk /dev/rdisk0:
    Code: 
    Disk: /dev/rdisk0     geometry: 121601/255/63 [1953525168 sectors] Signature: 0xAA55 Starting       Ending #: id  cyl  hd sec -  cyl  hd sec [     start -       size] ------------------------------------------------------------------------ 1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID> 2: AF 1023 254  63 - 1023 254  63 [    409640 - 1701278816] HFS+ 3: AB 1023 254  63 - 1023 254  63 [1701688456 -    1269536] Darwin Boot *4: 07 1023 254  63 - 1023 254  63 [1704804352 -  248002560] HPFS/QNX/AUX
    Here's what I get with gdisk:
    Code: 
    Disk /dev/rdisk0: 1953525168 sectors, 931.5 GiB Logical sector size: 512 bytes Disk identifier (GUID): 6075110F-7CEF-4604-85EE-6231B850E2AE Partition table holds up to 128 entries First usable sector is 34, last usable sector is 1953525134 Partitions will be aligned on 8-sector boundaries Total free space is 2564589 sectors (1.2 GiB)  Number  Start (sector)    End (sector)  Size       Code  Name 1              40          409639   200.0 MiB   EF00  EFI System Partition 2          409640      1701688455   811.2 GiB   AF00  1 TB APPLE HDD HTS54101 3      1701688456      1702957991   619.9 MiB   AB00  Recovery HD 4      1704804352      1952806911   118.3 GiB   0700  BOOTCAMP

    Okay, the code I typed didn't display properly in the forum. Let me try again.
    Here's what I get when I type
    sudo gpt -r -vv show disk0:
    gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
    gpt show: disk0: Suspicious MBR at sector 0
    gpt show: disk0: Pri GPT at sector 1
    gpt show: disk0: Sec GPT at sector 1953525167
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  1701278816      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      1701688456     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      1702957992     1846360        
      1704804352   248002560      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      1952806912      718223        
      1953525135          32         Sec GPT table
      1953525167           1         Sec GPT header
    And when I type fdisk /dev/rdisk0 I get:
    Disk: /dev/rdisk0          geometry: 121601/255/63 [1953525168 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AF 1023 254  63 - 1023 254  63 [    409640 - 1701278816] HFS+       
    3: AB 1023 254  63 - 1023 254  63 [1701688456 -    1269536] Darwin Boot
    *4: 07 1023 254  63 - 1023 254  63 [1704804352 -  248002560] HPFS/QNX/AUX
    Kappy,
    I can boot into OS X just fine so if possible, I'd like to avoid reformatting everything. If you know of a way I can add more than 2 partitions with OS X and Boot Camp, please let me know. As far as I know, rEFInd can recognize more than two partitions, but I don't think it can edit partitions on a GPT / hybrid MBR system. Or am I wrong?

  • Create Partition with Maxl

    Hi All
    I was trying to create a Partitioning with Maxl script and in the process Essbase went down. I logged back and try to create one partition then it is giving me error saying object database name does not exist.
    I cannot see any partition for the database from EAS, but when i run the maxl command to display the object of type partition on the database then it is giving an entry.
    I tried to drop it by the drop command but it doesnt work.
    Can someone shed some light how to remove the object?
    Regards
    Celvin

    I surmise, some Temporary partitioning file are created under Database folder.
    Just get into Database folder and remove the following files in background if persists.
    ddb - Partitioning definition file
    ddm - Temporary partitioning file
    ddn - Temporary partitioning file
    Regards
    Cnee

  • When I restart my computer and hold the option key after creating a bootable usb with windows 7 and partitioning only the original partition shows up. Not the windows one or the bootable usb.

         Okay so first things first this isn't the newest macbook pro. When I open about my mac and go to system report it says it is a Macbook Pro 3,1 and the Boot Rom Version say MBP31.0070.B07. Originally when starting up Boot Camp Assistant there where only two options, the "create windows 7 bootable usb" was not there at all. So after some editing and helpful tutorials I was able to get the option show up and created a bootable usb with windows 7 and downloaded the support software onto a separate flash drive. Finally I did the last step and created a second partition for windows. Once the process is complete my computer automatically restarts.
         This is where the problem is. Once my computer makes the booting up sound it doesn't load up windows it gets stuck on a apple logo as if it's trying to reastart normally and can't. So I shut down and this time I hold down the option key during start up. It brings up the main partition and some recovery thing but no windows partiton and no bootable usb.
         I forgot to mention that I am running OS X 10.9.3. Okay any body want to help me out? Iv'e been at this for hours and can't get an inch closer to having windows. Please and thank you!
    P.S. If I missed a discussion that answer my question just point me to it. Iv'e been looking for a while, but who knows i might have missed one.

    The only known way to make it work on an external drive is by first installing Windows onto an internal drive, then cloning the install to an external Thunderbolt drive. Thunderbolt is seen as an extension of the internal bus, so Windows doesn't see it as an external device.

  • I've lost the use of Appleworks in 10.9.2. Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other?

    I've lost the use of Appleworks by upgrading to 10.9.2.
    Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and  few other applications that aren't available on OS 10.9.2.
    Any suggestions?
    Thank you for your help.

    Hello again, WZZZ,
    Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
    Some thoughts:
    • The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
    • The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
    • If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
    So, all in all a good project that got me where I wanted to go. Thank you for your help.
    Appreciatively,
    wallah

  • I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

    Good Morning,
    I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
    I also rebooted holding down the shift key and still no Snow Leopard
    Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
    thank you.

    Have you restarted holding down the Opt key?  That procedure should give you a gray screen with all of the partitions that exist.  Then select the SL partition for boot.  Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

  • Partitioning an External 320gb drive for use with Time Machine and...

    I want to be able to use my Western Digital 320GB external drive for use with Time Machine and to use as extra storage space on both my Mac and when I boot into Windows Vista.
    Is this possible?
    I was playing around in Disk Utility and would I partition the part I want to use for Time Machine with the Mac OS Journaled, and whatever I want as space for windows, use a MS - DOS format?
    Has anyone done this before?
    Cheers-

    Unless you are using 64 bit version of MSWindows (64 bit XP/Vista), it won't be able to handle a disk with GUID partition table (GPT). Disks with Apple Partition Map (APM) or GUID partition table are the only ones that Time Machine will work with (not MBR disks). Note also that the MBR/APM/GPT are at the DISK level and not the partition level, so don't mix the format with partitioning scheme. Time Machine disks are meant to live in the Mac universe (for now, anyway) and sharing with the MSWindows 32-bit universe is not possible.
    See http://img87.imageshack.us/my.php?image=macpcdiskdd06sv8.png for some additional background.

  • Is SSD partitioning with boot camp stable and recommended?

    Is SSD partitioning with boot camp stable and recommended?

    The OS as already stated does not know the difference. The SSD will perform as it does with any operating system. SSDs can be partitioned as can HDDs.
    My Bootcamp partition is running exactly like it did on my HDD only faster. I have not experienced any issues with the Bootcamp partition or the SSD.

  • I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

    I have a new MacBook Pro with Lion installed and I want to know if I can partition the HD so that I can install & run Snow Leopard OS 10.6.8?

    Most likely won't run SL unless it's one that was released before Lion went public. Color SL gone from new Macs.
    27" i7 iMac 10.6.8 , Mac OS X (10.7.2), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

  • I installed the window 7 os in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume the mac os x?

    i installed the window 7 ultimate OS in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume mac mac os x?

    Assuming that you tried to install Win 7 in bootcamp.
    Power on the machine and press and hold the "option" key when you hear the bong sound.
    Select the Macintosh HD icon and press "return" or just click on the icon.
    Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

  • I have a macbook retina with a partition of windows 7 and Yosemite. When I use time machine in Yosemite it wont recognise the macintosh HD, but it recognises the windows hd ( bootcamp). Does anybody know why ?

    I have a macbook retina with a partition of windows 7 and Yosemite. When I use time machine in Yosemite it wont recognise the macintosh HD, but it recognises the windows hd (bootcamp ). Does anybody know why ?

    Please provide a bit more detail on what 'recognize' means. A screen shot is always very helpful.

  • Need help with export, truncate and import partitions for schema

    I need to export a couple partions for our Oracle 10g Data Warehouse, truncate the partions and re-import the data using the exported file. How can I do this?
    In summary here is what I need to do:
    1) Export partition P_SUB_1 of table1
    2) Export partition P_SUB2 of table2
    3) Truncate P_SUB1 partition of table1
    4) Truncate P_SUB2 partition of table2
    5) Rebuild indexes on table1 and table2
    6) Re-import data into each partition from export files.

    If you have enough free space it might be easier to keep these partition in the database and do an exchange.
    That means:
    create table tmp_sub1 as select * from table1 where 1=0;
    create table tmp_sub2 as select * from table2 where 1=0;
    alter table table1 exchange partition sub1 with table tmp_sub1;
    alter table table2 exchange partition sub2 with table tmp_sub2;After that your have the data of your original partitions in the tmp tables and the particular partitions in the partitioned table are empty and ready for the loading process.
    If the loading process fail and you need to restore the partitions just reverse the exchange statements and you are done.

  • Boot partitions with recovery and windows? new SSD drive

    Gang,
    I have a new Retina 15 and bought a larger SSD from OWC. I also upgraded  an older MB Air (from 128 to 240GB) and so I had an OWC Envoy with the original 128G from the MB Air in it. Killer by the way with USB3 support. So I plugged the Envoy into the Retina formatted the Envoy and then used that as a back up for the Retina using Time Machine.
    I swapped out the old drive in the Retina and then put in the new OWC drive and of course the boot recovery partition was not there and so I plugged in the Envoy which had it and formatted the drive then installed from backup and everything worked fine.
    BUT.... I no longer have a recovery or windows partition both of which I would like to have for this machine.
    So how do I do that? Reinstall MT LION?
    Thanks
    Gordon

    Gang,
    Ok here is how you do it!
    First create a MT Lion Recovery disk using Lion Disk Maker:
    http://www.macupdate.com/app/mac/39701/lion-diskmaker
    Then do a time machine backup to some kind of local drive or as I did my TimeCapsule.
    Boot holding down the option key with the Recovery Disk inserted (I made 16 SD card, but a 8G usb stick or the larger DVD writtable drive would work as well) and select to boot to the Recovery Disk. When booted, reformat the root boot drive with GUID partition and then do a full install to your standard boot drive. This will create the recovery partition and load the OS. This is the only way to get the recovery partition created.
    When done then select the Drive option when asked for were to upgrade your machine from. Then select the time machine backup which will load all your stuff.
    Your done!
    Thanks
    Gordon

  • Shrink HFS partition and extend NTFS partition with Disk Utility?

    My 10.7 iMac has two partitions: HFS+ & NTFS. The NTFS was set too small and is nearly full and I want to shrink the echoingly under-used HFS and add the resulting excess to the NTFS one.  Is this practicable?  I can see via Disk Utility that the Mac partition can be shrunk but no way is shown for modifying the NTFS side.  Maybe using a Linux tool is advised?

    You can't. If you try either Windows or OS X or both will no longer boot. You can try a aftermarket disk partitioning program but most that work on HFS partition don't work for Windows and those that work for Windows don't work on Mac extended partitions.
    The only real option is to backup the Windows partition with something like Win Clone then use Boot Camp assistant to remove Windows and the partition then again to recreate the Win partition in a larger size. After that install windows and then use the Win Clone software to restore Windows.

Maybe you are looking for