PI MDM Adapter Error - MDM port not found

We are working on an R/3 - PI - MDM scenario using the PI MDM Adapter. We are currently encountering the following errors.
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-08 15:31:22 Error Message could not be forwarded permantely to the JCA adapter. Reason: System error: MDM port not found
2009-09-08 15:31:22 Error Message could not be forwarded to the JCA adapter. Reason: Permanent error: Adapter call failed. Reason: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found
2009-09-08 15:31:22 Error Adapter Framework caught exception: System error: MDM port not found
2009-09-08 15:31:22 Error Delivering the message to the application using connection MDM_http://sap.com/xi/MDMAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found.
Is there an issue with our receiver communication channel and the MDM Access Parameters? We are using the Port code and Remote System code provided by the MDM team.
Anyone experience this same issue?

We are no longer seeing the MDM Port Not found error, but we are still seeing the UnknownServer error. Looking at RWB Message Monitoring it appears that the message is successfully sent to the MDM server, but nothing is coming into the Ready folder. Any ideas on where the message is going, and why it is not showing up in the Ready folder?
In RWB - Communication Channel Monitoring
MDM Adapter listener could not start due to: Can not create repository session '<server=XXXXXXXX serverUser=Admin repository=Product user=Admin>' caused by: Connection Failed: Cannot create connection to MDM Server 'XXXXXXXX' for one of the following reasons: (1) server does not exist, (2) server is not started, or (3) input/output problem while creating connection, error code: UnknownServer
In RWB - Message Monitoring
2009-09-11 14:04:15 Information The message was successfully received by the messaging system. Protocol: XI URL: http: //XXXXXXXX/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2009-09-11 14:04:15 Information Using connection MDM_http ://sap.com/xi/MDMAdapter. Trying to put the message into the receive queue.
2009-09-11 14:04:15 Information Message successfully put into the queue.
2009-09-11 14:04:15 Information The message was successfully retrieved from the receive queue.
2009-09-11 14:04:15 Information The message status was set to DLNG.
2009-09-11 14:04:15 Information Delivering to channel: MDS_TEST_CC
2009-09-11 14:04:15 Information The message was successfully delivered to the application using connection MDM_http ://sap.com/xi/MDMAdapter.
2009-09-11 14:04:15 Information The message status was set to DLVD.
I thought the implementation of the MDM Adapter was suppose to be straightforward and simple
Edited by: Chris Williar on Sep 11, 2009 9:56 PM

Similar Messages

  • MDM port not found

    Hi Friends,
    I'm doing currently MDM-PI-Idoc scenario. When I start the mdm adapter I get this error.
    MDM Adapter listener could not start due to: MDM port not found
    However I have checked PI sp level i.e 05 and MDM sp level i.e 04, will this really be a problem for happening this issue?
    How can I solve this?
    Regards
    Nag

    Hi.
    Pls now on search before on SDN. We have multiple threads about this.
    MDM Port not found error in MDM adapter for PI 7.0
    SAP PI 7.1 MDM Adapter
    PI MDM Adapter Error - MDM port not found
    MDM Adapter 7.1
    Regards.

  • PI-MDM Port Not Found Issue

    Dear Experts,
    We are posting a message from MDM to ECC via PI. Idoc was successfully created in ECC.
    Our requirement is : getting a response message from ECC to MDM via PI. Message reached PI but not posting to MDM Port folder and in CC Monitoring error is as below::
    "Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.lib.ra.cci.XIAdapterException: System error: MDM port not found"**
    Could you please provide your inputs.
    Thaking you.
    Hemanth

    Hi Hemanth,
    Please check the Setting for Inbound Messaging (communication channel) of PI
    http://help.sap.com/saphelp_nwmdm71/helpdata/en/48/9854884d3217cee10000000a421937/content.htm
    Make sure here you fill all parameters correctly along with <serverName>:<portNumber>, Port Code and Remote System Code etc of the inbound MDM port.
    Also, check that there is no more than one MDM receiver configured per MDM inbound port in your system landscape. Deviating from this guideline can lead to a race condition state where different MDM receiver communication channels are monitoring the same MDM inbound port, and only the first one receives the import acknowledgment of the message.
    Just check and revert with result.
    Regards,
    Mandeep Saini

  • XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 404 Not Found

    Hi,
    The scenario is ECC-XI-SOAP(Asynchronous). We are getting the below mentioned error in SOAP reciver channel:
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 404 Not Found
    Channel Configuration:
    Target URL:
    http://<hostname>:<port>/bpm/com/xyzprocess/SomeIntermediateEvent?wsdl=binding&mode=ws_policy
    Tried with
    http://<hostname>:<port>/bpm/com/xyzprocess/SomeIntermediateEvent as well
    Conversion parameters:
    Checked Do Not Use Soap Envelope
    Appreciate any help in this regards.
    Regards,
    Vishal

    Can you share with us the HTTP Headers for the Request?
    POST http://server/sap/xi/engine?type=entry&version=3.0&Sender.Service=BusService&Interface=http://company.com/abc/CommonAck%5EMI_CommonAck_ia HTTP/1.1
    Accept-Encoding: gzip,deflate
    Content-Type: text/xml;charset=UTF-8
    SOAPAction: "http://sap.com/xi/WebService/soap1.1"
    User-Agent: Jakarta Commons-HttpClient/3.1
    Host: server
    Content-Length: 560
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xir="http://www.dummy.org/response/">
    <soapenv:Header/>
    <soapenv:Body>
    <xir:responseInput>
    <Id>007</Id>
    <Flag>10</Flag>
    </xir:responseInput>
    </soapenv:Body>
    </soapenv:Envelope>
    You can use the MessageTransformBean to correct the content type.
    Thanks for the suggestion Mark.I am using MessageTransformBean but still the same issue.
    Parameter Name:Transform.ContentType
    Parameter Value:text/xml;charset=utf-8
    Edited by: Vishal.P.Kulkarni on Oct 17, 2011 6:27 AM
    Edited by: Vishal.P.Kulkarni on Oct 17, 2011 6:29 AM

  • Error: Sender agreement not found, lookup of binding via CPA-CACHE failed.

    Hi,
    I am doing an RFC to File Scenario in which RFC has to be triggered from CRM system. The TCP/IP connection and communication Channel are working fine. But when i trigger my RFC using the RFC destination following errors occur:
    1. The SYSTEM_FALIURE exception comes on CRM side.
    2. In adapter monitoring the following error comes on XI side:
           Error: Sender agreement not found, lookup of binding via CPA-CACHE failed for Adapter type RFC.
    I have also tried the scenario with RFC request as source message and also after J2EE cache refresh but the problem still persists. And one more thing my file adapter (In receiver communication channel) is not working means it is not started. And no message is coming in SXMB_MONI.
    Could anyone please help me to resolve this issue.
    Regards,
    Vinay Yadav

    Hi Aaron,
    I had the same error and your feedback solved my problem!
    Thank you sooo much!!!!
    Luciana

  • Cupsd's bootstrap server port not found

    I've got both Samba and CUPS turned off at startup, yet I get this recurring error in the system log:
    Dec 12 19:07:12 /usr/sbin/smbd: cupsd's bootstrap server port not found
    Dec 12 19:07:13 /usr/sbin/smbd: cupsd's bootstrap server port not found
    Dec 12 19:07:13 /usr/sbin/smbd: cupsd's bootstrap server port not found
    Dec 12 19:07:14 /usr/sbin/smbd: cupsd's bootstrap server port not found
    I kill smbd but it starts up again, apparently thanks to /usr/libexec/launchproxy
    I'm using the default configuration files for Samba and CUPS and there is no printer set up. Using OS X 10.4.3 (not Server). repaired permissions.
    this is driving me nuts...any suggestions welcome.

    I get that response all the time, it doesn't seem to have any relevance to anything and as far as I can tell, doesn't impair the functioning of my machine.
    sometimes, too much information is too much information...
    Miriam

  • ERROR: OUI files not found at their expected location. while cloning 11.5.9

    Dear Friends,
    Getting error when cloning 11.5.9 from PROD to DEV:
    ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
    <iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
    Restart adclone.pl after performing required corrections.
    I applied the patch 5035661 also but still the error exists.
    Please let me know the fix.
    [appldev@betestoracle bin]$ perl adcfgclone.pl appsTier
    First Creating a new context file for the cloned system.
    The program is going to ask you for information about the new system:
    Enter the values for the new APPL_TOP Context:
    Does the target system have more than one application tier server node (y/n) [n] ?:
    Is the target system APPL_TOP divided into multiple mount points (y/n) [n] ?:
    Target system APPL_TOP mount point [apps/applprod/prodappl]:/apps/DEV/devappl
    Target system COMMON_TOP directory [apps/applprod/prodcomn]:/apps/DEV/devcomn
    Location of JDK 1.3.1 on the target system [usr/java/jdk1.3.1_10]:
    The new context file has to contain port numbers related to target system.
    Do you want to preserve the port values from the source system on the target system (y/n) [y] ?:n
    Clone Context uses the same port pool mechanism as the Rapid Install
    Once you choose a port pool, Clone Context will validate the port availability.
    Enter the port pool number:[0-99]
    50
    Checking the port pool 50
    done: Port Pool 50 is free
    Web Listener port is 8050
    Complete port information available at /apps/DEV/devappl/admin/out/PROD_betestoracle/portpool.lst
    Backing up /apps/DEV/devappl/admin/PROD_betestoracle.xml to /apps/DEV/devappl/admin/PROD_betestoracle.xml7.bak
    Creating the new APPL_TOP Context file from :
    /apps/DEV/devappl/ad/11.5.0/admin/template/adxmlctx.tmp
    The new APPL_TOP context file has been created :
    /apps/DEV/devappl/admin/PROD_betestoracle.xml
    Log file located at /tmp/CloneContext_05131045.log
    Please enter the APPS password:
    apps
    Running Rapid Clone with command:
    perl ./adclone.pl java=/apps/DEV/devcomn/util/jre/1.1.8 mode=apply stage=/apps/DEV/devcomn/clone component=appsTier method=CUSTOM appctxtg=/apps/DEV/devappl/admin/PROD_betestoracle.xml
    ERROR: OUI files not found at their expected location. Please make sure that the pre-requisit OUI patch was applied correctly: patch should be unzipped directly at the ORACLE_HOME root level so that
    <iAS ORACLE_HOME>/oui21/oui/lib/OraInstaller.jar exists.
    Restart adclone.pl after performing required corrections.
    Starting application Services for PROD:
    Running:
    /apps/DEV/devcomn/admin/scripts/PROD_betestoracle/adstrtal.sh APPS/<appspwd>
    Regards,
    DB

    ERROR: OUI files not found at their expected location.Please see these docs.
    Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1] -- adcfgclone.pl appsTier fails with "ERROR: OUI files not found at their expected location"
    Preclone DBtier Fails: Error: Oui Files Not Found [ID 739589.1]
    Troubleshooting Guide and Known Issues List for the Oracle Application Management Pack for Oracle E-Business Suite [ID 812294.1]
    Application Management Pack for Oracle E-Business Suite Release 2.0.x Troubleshooting Guide [ID 412044.1]
    Thanks,
    Hussein

  • Hp 5535 will not scan, error message printer not found

    I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
    This question was solved.
    View Solution.

    Hi @prazdancr,
    Welcome to the HP Forums!
    I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
    For further assistance I will need to know:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies by itself.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
    In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
    Hope to hear from you soon, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I want to add refworks grabit to my tool bar, when I try to install for firefox it won' t let me this is what I get: HTTP Error 404.3 - Not Found The page you a

    this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
    Error Summary
    HTTP Error 404.3 - Not Found
    The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
    Detailed Error Information
    Module StaticFileModule
    Notification ExecuteRequestHandler
    Handler StaticFile
    Error Code 0x80070032
    Requested URL http://www.refworks.com:80/refgrabit/install.xpi
    Physical Path E:\RefGrabIt\install.xpi
    Logon Method Anonymous
    Logon User Anonymous
    Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
    Most likely causes:
    It is possible that a handler mapping is missing. By default, the static file handler processes all content.
    The feature you are trying to use may not be installed.
    The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
    If ASP.NET is not installed.
    Things you can try:
    In system.webServer/handlers:
    Ensure that the expected handler for the current page is mapped.
    Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
    Pay extra attention to typographical errors in the expected handler line.
    Please verify that the feature you are trying to use is installed.
    Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
    To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
    The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
    For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
    Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
    Install ASP.NET.
    Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
    Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
    View more information »

    That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

  • Error 7: File not found occurs in 8.2 from transition of 4.1. Specifying the file in file dialog returns error although file is in the directory.

    Copied a program from 4.1 to 8.2 recently and receive an error 7: File not found at open file+.vi.  The program is built so a file dialog will pop up and ask for the destination of the file.  Eventhough there is a file in the specified directory, an error is returned.  Running open file+.vi by itself returns no error with the same file designation.  Any clues?

    noviceak,
    Welcome to the NI Discussion Forums.
    I created a quick VI in LabVIEW 4.1 that displays a file dialog and then passes that file path to "Read Characters from File.vi" (which in turn calls Open File+.vi).  I then opened this file in LabVIEW 8.2 and ran it successfully (see code screenshot below).
    When you say there is a file in the specified directory are you using the file dialog to browse to the directory or to select the specific file?  Open File+.vi expects the path to a file rather than a directory - that is C:\folder\file.txt rather than C:\folder.  You might also want to create an indicator or probe to see what path is being passed to Open File+ to ensure it is what you expect.
    I feel like I should also say that in the days (years) inbetween LabVIEW 4.1 and 8.2 the file operation VIs have changed significantly.  While the old Open File+.vi still lives in vi.lib for compatibility purposes we no longer recommend using it for new applications.
    I hope this helps and again, welcome to the community.
    Regards,
    Simon H
    Applications Engineer
    National Instruments
    http://www.ni.com/support/
    Message Edited by Simon H on 01-18-2007 08:01 PM
    Message Edited by Simon H on 01-18-2007 08:03 PM
    Attachments:
    LV4 File Dialog.png ‏3 KB

  • Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

    Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
    Sorry for the long title, first time poster here.

    This thread is pretty old, are you still having this issue?

  • Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...

    Hi All,
    My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
    Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
    Message NO k5011.
    As this is more ralaing to the costing sheet, this refers to controlling module.
    We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the  6.0 verion.
    Can anybody suggest the reason for the above error.
    Thanks & Regards
    Shankar

    HI,
    whats the message class, message number?
    BR Christian

  • Error "Run-Time Error '76' PAth Not Found" in XML Publisher Desktop

    Hi All,
    we are trying to preview the PDF output in the XML Publisher Desktop Application.
    We are able to LOAD the data successfully.
    But whenever we try to preview the output, we are getting an error saying "Run-Time Error '76' Path Not Found".
    We are using the XMLP Desktop application on the Client Machine.(Citrix)
    Can anybody help us in this regard?
    Thanks,
    Sachin.

    Hi.
    You are posting in the wrong forum.
    Please post to the BI Publisher Forum:
    BI Publisher

  • Itunes install error message - program not found ...x64/difxinst64.exe

    itunes install error message - program not found ...x64/difxinst64.exe
    no problems with ITunes on Dell Inspiron Windows 7 until yesterday.  ITunes version 11.0.2.  iphone won't connect stating required software is not installed.  uninstall and install 64 bit version of iTunes.  I have 64 bit version already.  I have uninstalled and reinstalled 5 times already.  When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe.  file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel.   iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again.  therefore, I can't sync my iphone with iTunes until I figure this out.
    can't win for losing.  had iTunes on my windows 7 laptop for 4 years.  first time I've ever encountered this.

    I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
    [code]
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\.exe]
    @="exefile"
    "Content Type"="application/x-msdownload"
    [HKEY_CLASSES_ROOT\.exe\PersistentHandler]
    @="{098f2470-bae0-11cd-b579-08002b30bfeb}"
    [/code]
    Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

  • Error ,Field catalog not found while doing billing with DP90

    Dear Guru's
    while doing billing with DP90 transaction code.i have given service order no xxxx and execute.Then i received the below error
    Field catalog not found , Message no. 0K530.Kindly help me in solving the issue.
    Thank u
    S Babu

    hi naga suribabu,
    I am also facing same issue. can you please help, where to  check the configuration for this issue

Maybe you are looking for